Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PLUG, QUICK DISCONNECT

Active
SPE7M3-26-T-8980Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7M3-26-T-8980, issued by the DLA Land and Maritime Fluid Handling Division, is a fixed-price procurement for quick disconnect plugs including caps and chains. The requirement consists of two line items for NSN 4730013740686, with total quantities of 235 units divided between delivery to DLA Distribution Albany in Georgia and DLA Distribution New Cumberland in Pennsylvania. The delivery window is 168 days, with an original required delivery date of February 10, 2027, and a need ship date of March 9, 2027. Terms are set as FOB Origin, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and RP001, with packaging following ASTM D3951. Technical and quality requirements are governed by the DLA Master List, including the removal of government identification from non-accepted supplies. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Compliance is required for the Buy American Act, Berry Amendment, and various FAR and DFARS clauses regarding cybersecurity, hazardous material labeling, and the prohibition of covered defense telecommunications equipment. Quotations were due by September 21, 2026, via the DIBBS system.

General Info

Fixed-price procurement for 235 quick disconnect plugs delivered by March 9, 2027.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

814 RADFORD BLVD BLDG 1221 DOOR 20, ALBANY, GA, 31704-1128, USA

Set-Aside

NONE

Documents

(1)

SPE7M3-26-T-8980 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUSA
Contacts
William Cain
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PLUG,QUICK DISCONNECT
PLUG, QUICK DISCONNECT. INCLUDES: CAP AND CHAIN.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
E/I LIGHT AND MEDIUM TRUCKS (FMTV).
GROVE U.S. LLC 12361 P/N 7-709-000816
AMZ ALABAMA INC. 076M6 P/N 7-709-000816
BAE SYSTEMS TACTICAL VEHICLE SYSTEMS LP 0FW39 P/N 7-709-000816
OSHKOSH DEFENSE LLC 75Q65 P/N 7HA322
ITT CANNON LLC 71468 P/N CA121004-9
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018270552 0001 EA 19.000
NSN/MATERIAL:4730013740686
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take
SPE7M3-26-T-8980
SECTION B
PR: 7018270552 PRLI: 0001 CONT’D
precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3121
DLA DISTRIBUTION ALBANY
TRANSPORTATION OFFICER
814 RADFORD BLVD BLDG 1221 DOOR 20
ALBANY GA 31704-1128
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3121
DLA DISTRIBUTION ALBANY DDAG-T
MCLB BLDG 1221 DOOR 20
814 RADFORD BLVD
ALBANY GA 31704-1128
US
Need Ship Date:03/09/2027 Original Required Delivery Date:02/10/2027
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7018270552 0002 EA 216.000
NSN/MATERIAL:4730013740686
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
SPE7M3-26-T-8980
SECTION B
PR: 7018270552 PRLI: 0002 CONT’D
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:03/09/2027 Original Required Delivery Date:02/10/2027
SPE7M3-26-T-8980 NSN/Part Number: 4730-01-374-0686 Quantity: 19 EA Purchase Request: 7018270552QTY: 235 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M4-26-Q-1035
This solicitation, issued by the Department of Defense Fluid Handling Division under solicitation number SPE7M4-26-Q-1035, is for the procurement of 103 units of metal tube assemblies, specifically extension tube nozzles with part number 4710-00-792-9886. The contract is designated as a Total Small Business Set-Aside and requires delivery within 125 days after the order is received. The agreement mandates strict adherence to DLA packaging requirements and technical and quality standards as specified in the DLA Master List. Additionally, the contract includes a specific requirement for the removal of government identification from any supplies that are not accepted. Interested parties must respond by September 17, 2026.
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332996
New
DIBBS
STRAINER ELEMENT, SEDIM
Solicitation # SPE7M3-26-T-8759
This solicitation from the Department of Defense Fluid Handling Division is for the procurement of 185 sediment strainer elements under part number 4730-00-767-7702. The contract requires delivery within 58 days after receipt of order and is being performed at Hill AFB. Compliance requirements are stringent, including CMMC Level 2 certification and strict adherence to DLA packaging standards. The use of Class I ozone depleting substances is prohibited. Additionally, the contract involves export-controlled technical data subject to ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed specialized training to access the necessary technical data.
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
STRAINER, SEDIMENT
Solicitation # SPE7M3-26-T-8218
This contract is for the procurement of six Model 761 flanged Y-strainers, identified by NSN 4730-01-330-3565 and Core Industries Inc. part number 761 1/2IN FLGE150. The technical specifications require a 150 PSI class strainer featuring a nickel alloy screen with 1/32 inch perforations. This is designated as a critical application item, and the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions defined by NAVSEA. The order is managed under solicitation SPE7M3-26-T-8218 with a required delivery date of January 30, 2027, and a delivery window of 158 days. Shipping is FOB Origin, with the inspection and acceptance points set at the destination. All items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129, and delivered to the DLA Distribution New Cumberland facility in Pennsylvania.
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, PIPE TO TUBE
Solicitation # SPE7M3-26-T-8749
Solicitation SPE7M3-26-T-8749, issued by the DLA Land and Maritime Fluid Handling Division, is a fixed-price request for 74 packages of 90-degree pipe-to-tube elbows. Each package contains two units. The required items are steel with a cadmium plated finish, featuring a 3/4 inch threaded male tube end with a flared seat, nut, and sleeve, and a 3/4 inch threaded female pipe end (NPTF, RH). These are classified as critical application items and must adhere to basic specification MS51506F. The procurement prohibits the use of class I ozone-depleting chemicals and excludes any items produced via additive manufacturing. The contract specifies a delivery period of 212 days, with a required delivery date of April 12, 2027, shipped FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination, requiring zero non-conformances in sample lots. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. Invoicing is to be processed through the Wide Area WorkFlow system. The solicitation is open for full competition, with a response deadline of September 11, 2026, and includes specific requirements for the Buy American Act and Berry Amendment compliance.
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
COUPLING BODY, TUBE
Solicitation # SPE7M3-26-T-8752
Solicitation SPE7M3-26-T-8752 is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 192 units of 1/4 inch OD tube coupling bodies. These components, identified as critical application items for aircraft use, must be manufactured from corrosion resistant steel. The procurement is designated as a total small business set-aside under NAICS code 332996. Delivery is required within 152 days of award, with a need ship date of May 14, 2025, and a final required delivery date of August 11, 2027. Shipping is FOB Origin to DLA Distribution Jacksonville, Florida. The contract mandates strict adherence to technical and quality requirements, including the DLA Master List and specific configuration change management protocols. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with a total prohibition on the use of mercury or mercury compounds in preservation and packaging. Inspection and acceptance will occur at the destination. Offerors must submit quotes via the DIBBS portal and comply with the Buy American Act and Berry Amendment. Payment and receiving reports are to be processed electronically through the Wide Area WorkFlow system.
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
REDUCER, PIPE
Solicitation # SPE7M3-26-T-8754
This contract is for the procurement of 13 units of pipe reducers under solicitation SPE7M3-26-T-8754 for the Department of Defense Fluid Handling Division. The items must adhere to technical drawing 16236 RE-013829105 Revision A and comply with strict environmental restrictions, specifically prohibiting the intentional addition of mercury or the use of Class I ozone depleting chemicals. Delivery is required within 80 days, with a need ship date of December 1, 2026, and shipping is designated as FOB Origin. The goods are to be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirements, with inspection and acceptance occurring at the destination.
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
COUPLING ASSEMBLY, QUIC
Solicitation # SPE7M3-26-T-8776
Solicitation SPE7M3-26-T-8776, issued by the Department of Defense DLA Land and Maritime Fluid Handling Division, seeks quotes for five aluminum quick disconnect coupling assemblies under NSN 4730-00-145-7362. The procurement is subject to a delivery timeframe of 157 days after the order, with a designated need ship date of February 16, 2027, and a final required delivery date of November 11, 2027. Delivery and acceptance are set for destination at DLA Distribution San Diego. The government may utilize an automated award process, and a price evaluation preference is available for certified HUBZone small business concerns. Offers utilizing additive manufacturing are ineligible for award without prior approval. The contract is governed by strict technical and regulatory standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the nature of the technical data, the requirement is subject to export controls under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA training. Compliance with the Buy American Act and Berry Amendment is required, and any use of non-domestic materials must be disclosed. Invoicing must be processed through the Wide Area WorkFlow system. Security requirements include DFARS 252.204-7012 for safeguarding covered defense information and adherence to CMMC Level 2 standards.
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-376E
This solicitation, identified as SPE7M4-26-T-376E, is issued by the Department of Defense through the DLA Land and Maritime Fluid Handling Division for the procurement of 80 units of metal tube assemblies under NSN 4710-01-009-4306. The contract requires a delivery timeline of 83 days after receipt of order and is categorized under NAICS code 332996. Performance is designated for Anniston, Alabama, with quotes due by September 11, 2026, via the DIBBS platform. Strict compliance is required regarding cybersecurity and export controls. The contractor must be a CMMC Level 2 Certified Third-Party Assessment Organization and adhere to ITAR and EAR regulations concerning the handling of technical data. Access to export-controlled information is limited to contractors with an approved US/Canada Joint Certification Program certification who have completed the necessary Department of Defense training and questionnaires.
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, TUBE TO HOSE
Solicitation # SPE7M1-26-U-5577
This solicitation, identified as SPE7M1-26-U-5577, is issued by the Department of Defense Maritime Supply Chain for the procurement of tube to hose elbows under NSN 4730015063179. The requirement is for an estimated quantity of 156 units with a delivery timeframe of 86 days after receipt of order. This is a critical application item associated with AM General LLC part number 5716759 and Cummins Filtration Inc. part number Q348148. The contract is structured as a unilateral indefinite delivery/indefinite quantity arrangement below the Simplified Acquisition Threshold for a one-year period. Delivery is FOB Origin with inspection and acceptance occurring at the destination. Compliance is required for DLA packaging requirements under RP001 and marking standards per MIL-STD-129. All technical and quality requirements are governed by the DLA Master List, and the solicitation response deadline is September 11, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
COUPLING, TUBE
Solicitation # SPE7M3-26-T-8760
This solicitation, identified as SPE7M3-26-T-8760, is issued by the Department of Defense Fluid Handling Division for the procurement of 13 tube couplings under National Stock Number 4730-01-090-1408. The contract falls under NAICS code 332996 and specifies a delivery timeline of 97 days after receipt of order, with the place of performance located at Hill AFB. The acquisition is processed as an automated simplified acquisition via DIBBS, referencing the DLA master solicitation Revision 105. The contract mandates strict adherence to DLA packaging requirements and technical quality standards. It prohibits the use of Class I ozone-depleting chemicals and restricts the intentional addition of mercury or mercury-containing compounds, with specific exceptions for functional components like batteries and sensors. Additionally, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the data.
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
PLUG, PIPE
Solicitation # SPE7M3-26-T-9002
Solicitation SPE7M3-26-T-9002 is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 930 units of pipe plugs, identified by NSN 4730015085709. The requirement is issued under the First Destination Transportation program with shipping based on FOB Origin. The need ship date is October 17, 2026, with an original required delivery date of November 5, 2026, and a delivery lead time of 25 days after order. Inspection and acceptance will take place at the destination, specifically the New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and RP001 for palletization, with DLA Master List requirements taking precedence over ASTM D3951. Invoicing must be processed through the Wide Area WorkFlow system. Key regulatory requirements include compliance with the Buy American Act and the Berry Amendment, as well as DFARS cybersecurity standards for safeguarding covered defense information. Notably, the government will not evaluate or award contracts to offers utilizing additive manufacturing. A price evaluation preference is available for certified HUBZone small business concerns.
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332996
New
SLED
Water Pipe & Fittings Supply
City of Social Circle

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 332911
New
DIBBS
Supplier of Restrictor Check Valves (NSN 4820-00-564-9205)
Industrial Valve Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 3 days
View Details
NAICS: 423810
New
DIBBS
Surplus Supplier for Obsolete Ball Valves
Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332999
New
DIBBS
Supply of Flanged Y-Strainers (Nickel Alloy)
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 326122
New
DIBBS
Supplier of Pipe Plugs (NSN 4730015085709)
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336415
New
DIBBS
PISTON, RESONANCE CH
Solicitation # SPE7M4-26-T-376N
This contract solicitation, identified as SPE7M4-26-T-376N, is issued by the Department of Defense Fluid Handling Division for the procurement of eight units of Resonance Channel Pistons, identified by NSN 2010-01-029-9345 and Kingsbury Inc. part number 65-5691-126. This is a critical application item with a required delivery date of December 23, 2027, and a delivery window of 143 days after order. The contract specifies FOB Origin shipping with inspection and acceptance occurring at the destination, specifically DLA Distribution Warner Robins in Georgia. The procurement is subject to strict technical and quality standards, including DLA packaging requirements under RP001 and marking standards per MIL-STD-129. Environmental restrictions are explicitly stated, prohibiting the intentional addition of mercury or mercury-containing compounds and the use of Class I ozone-depleting chemicals. All packaging and palletization must adhere to MIL-STD-2073-1E and the DLA Master List of Technical and Quality Requirements. Quotes for this solicitation were due by September 11, 2026.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
CAP, LINEAR ACTUATING C
Solicitation # SPE7M4-26-T-353D
This contract is for the procurement of five units of a linear actuating cylinder cap, identified by NSN 1650-00-727-4617 and Eaton Aerospace part number 14839-1. The order is designated as a critical application item with a delivery timeframe of 168 days after the order is placed. Delivery and acceptance are both set at the destination, with shipping directed to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to several technical and quality standards, including DLA packaging requirements, MIL-STD-129 for marking and labeling, and ASTM D3951 for packaging. Quality assurance is governed by zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Additionally, the contractor must comply with cybersecurity requirements, specifically the CMMC Level 2 self-assessment and regulations regarding covered defense information.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 326122
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-375U
Solicitation SPE7M4-26-T-375U, issued by the DLA Land and Maritime Fluid Handling Division, is a request for quotations for one metal tube assembly, identified by NSN 4710-01-689-8194. The item must be manufactured according to specific reference drawings and the Rev A Gen 3 Technical Data Package. Delivery is required within 20 days of award, with the destination for both inspection and acceptance being the USS LABOON DDG 58. All quotes must be submitted via the DIBBS portal by September 11, 2026. This procurement is subject to strict export controls under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA training to access technical data. The solicitation includes a price evaluation preference for certified HUBZone small businesses and prohibits the use of additive manufacturing without prior approval. Compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information is mandatory. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 standards. Payment and invoicing shall be processed electronically through the Wide Area WorkFlow system.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS