Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PLUNGER, VALVE

Active
SPE7M5-26-T-8976Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense Active Devices Division under solicitation number SPE7M5-26-T-8976, is for the procurement of 36 valve plungers identified by NSN 4810-00-432-0740. The contract requires delivery within 119 days after receipt of order and specifies performance at Hill AFB. The response deadline for this federal requirement is September 8, 2026. The procurement is subject to several critical regulatory requirements, including DLA packaging standards and the protection of covered defense information. It incorporates technical and quality requirements from the DLA Master List and mandates the removal of government identification from any non-accepted supplies. The project falls under NAICS code 332911 and is managed by primary point of contact Jacob Mokma.

General Info

DoD seeks 36 valve plungers for Hill AFB by September 8, 2026.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

332911 - Industrial Valve ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

(1)

SPE7M5-26-T-8976.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Jacob Mokma
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PLUNGER,VALVE
1PLUNGER, VALVE.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 4810-00-432-0740 Quantity: 36 EA Purchase Request: 7015234122QTY: 36 Delivery: 119 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332911
New
DIBBS
ACTUATOR, ELECTRO-MECHA
Solicitation # SPE7MC-26-T-248D
This contract, identified as SPE7MC-26-T-248D, is a solicitation by the Defense Logistics Agency for one electro-mechanical linear actuator with a worm gear assembly. The required item is associated with NSN 4810-01-539-4781 and corresponds to part numbers from Curtiss-Wright Flow Control Corporation and Emerson Automation Solutions. The delivery is required within 20 days after receipt of the order, with a final required delivery date of September 4, 2026. The shipment is destined for the USS ST LOUIS LCS 19 via vessel shipment and must be delivered FOB destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements RP001. The contract also incorporates technical and quality requirements RA001 and mandates the removal of government identification from any non-accepted supplies per RQ011.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, PNEUMATIC TIRE
Solicitation # SPE7L7-26-T-5080
This contract is for the procurement of four pneumatic tire valves, identified by NSN 2640008572891 and part numbers VS-740-1-GOVT or 717-7. The valves must be size TR-717-02, feature an off-center position, and utilize a screw-in tube application method. A critical environmental requirement prohibits the use of Class I ozone depleting chemicals in the delivered items. The order is issued by the Defense Logistics Agency with a delivery requirement of 20 days after order. Shipping is FOB Origin and destined for the Parts-Attach General Depot in Tainan City, Taiwan. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073-1E, as well as DLA packaging requirements for procurement.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-142K
The contract specifies the procurement of two safety relief valves under NSN 4820-01-493-2641 with part numbers 0996401G0035, 0996401S0035, and 9964G51M from Emerson Automation Solutions, classified as a critical application item. Delivery is required FOB origin within 383 days of contract award, with no variance allowed in quantity, and acceptance occurs at the destination. All items must comply with MIL-STD-2073-1E packaging standards, including specific method codes for preservation, wrapping, and containerization, and marking must follow MIL-STD-129 with no special markings required. Palletization adheres to DLA packaging requirements, and the delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. The contract strictly prohibits the use or incorporation of Class I ozone-depleting chemicals, superseding any conflicting specification requirements, and mandates approval for substitute chemicals unless explicitly authorized. The unit of issue is each, with a total price of $2.00 per unit, totaling $4.00. The solicitation number is SPE7MC-26-T-142K, issued by the Department of Defense through the DDSP New Cumberland Facility, with a response deadline of July 31, 2026, and the required ship date set for August 19, 2027. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332911
New
DIBBS
CAP, VALVE
Solicitation # SPE7M1-26-T-325Y
This contract, identified as SPE7M1-26-T-325Y, is for the procurement of one valve cap with NSN 4820-01-249-7147 and part number 22170-2 from Hydraulics International, Inc. The order is managed by the Department of Defense Maritime Supply Chain and requires delivery to Mountain Home AFB in Idaho. The required delivery date is June 2, 2026, with a delivery timeframe of five days after order. The agreement specifies that the item must be shipped FOB Origin and will undergo inspection and acceptance at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements and technical quality standards. Shipping must be conducted via the fastest traceable means, and the use of parcel post is strictly prohibited.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
PARTS KIT, GLOBE VAL
Solicitation # SPE7MX-26-T-0008
This contract is for the procurement of eight globe valve parts kits, identified by NSN 4820012200982 and Griswold Industries part number 9454708A. Each kit consists of ten components, including one disk, one diaphragm, three o-rings, and five gaskets. This is designated as a critical application item and a restricted source item, requiring engineering source approval by the government design control activity. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds, with specific exceptions for functional components as defined by NAVSEA. The order is managed under solicitation SPE7MX-26-T-0008 with a required delivery date of February 1, 2027, and a delivery window of 134 days. Shipping is FOB Origin and destined for the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Compliance with DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 for marking is mandatory. Technical and quality requirements are governed by the DLA Master List, and the contractor must adhere to configuration change management and government identification removal protocols.
LAND SUPPLIER OPERATIONS SMSG

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, RELIEF, PRESSU
Solicitation # SPE7MC-26-T-248Q
This contract is a solicitation from the Defense Logistics Agency for the procurement of one pressure and temperature relief valve, identified by NSN 4820016692027. The item must be oxygen cleaned in accordance with MIL-STD-1330 and must not contain intentionally added mercury or mercury-containing compounds, except where functionally required. Approved manufacturers include Rix Industries and Dante Valve Company. The delivery is required within 20 days and is designated as FOB Destination, with the final shipment destined for the USS Gerald R Ford CVN 78. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The required delivery date is set for March 20, 2025, and the shipment must be sent via the fastest traceable means.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, REGULATING, FLUID
Solicitation # SPE7M1-26-Q-1459
This contract is a firm fixed price solicitation for one fluid pressure regulating valve, identified by NSN 4810-01-410-8854 and associated with Bosch Rexroth Corporation part numbers. The item is designated as a restricted source item requiring engineering source approval by the government design control activity. Delivery is required within 30 days after receipt of order, with the destination and acceptance point set at the USS Essex LHD 2. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Key quality and environmental restrictions include a prohibition on the intentional use of mercury and class I ozone depleting chemicals. Additionally, the contractor must maintain supply chain traceability documentation and follow specific sampling methods per MIL-STD-1916 or ASQ H1331 to ensure quality assurance.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BUTTERFLY
Solicitation # SPE7MC-26-T-248A
This contract, identified as SPE7MC-26-T-248A, is for the procurement of five butterfly valves under NSN 4820016625112. The order is issued by the Department of Defense through DLA Distribution San Joaquin, with a required delivery date of March 18, 2026, and a delivery window of 180 days. The shipment is to be delivered FOB Origin to the receiving warehouse in Tracy, California. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and ASTM D3951, with marking and labeling performed according to MIL-STD-129. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance. Inspection and acceptance will take place at the destination.
DLA DIST SAN JOAQUIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-T-04KY
The contract is for the procurement of five plain hexagon nuts identified by NSN 5310-01-457-5559 under solicitation number SPE4A6-26-T-04KY issued by the Defense Logistics Agency, a division of the Department of Defense. The solicitation was posted on July 7, 2026, with a response deadline of July 15, 2026, indicating a competitive bidding process for federal supply requirements. The item is classified as a standard military hardware component, and there is no designated set-aside program or NAICS code specified, suggesting it is open to general government contractors. The place of performance and point of contact details are not provided, and the contract is managed through the DIBBS system, with all relevant information accessible via the official DLA solicitation portal.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7MC-26-T-248K
This solicitation from the DLA Dist San Joaquin is for the procurement of seven bronze body ball valves, each measuring 1/2 inch with a 700 PSI single response rating. The contract, identified by NSN 4820-01-228-7609 and solicitation number SPE7MC-26-T-248K, requires delivery within 195 days after receipt of order to the performance location in Tracy, California. The contract is subject to strict export control regulations under ITAR and EAR, meaning technical data cannot be shared with foreign persons without prior authorization from the Department of State or Commerce. To access this data, contractors must hold an approved US/Canada Joint Certification Program certification and complete specific DLA export-control training and questionnaires. All items must also adhere to DLA packaging requirements.
DLA DIST SAN JOAQUIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MX-26-T-0010
This contract, identified as SPE7MX-26-T-0010, is a solicitation for the procurement of 13 valve disks, specifically part number C9820G from Griswold Industries. The items are identified by NSN 4820014706449 and are to be delivered to DLA Distribution San Diego. The delivery timeline is set for 137 days after receipt of order, with a required delivery date of May 18, 2027. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction is included, prohibiting the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA. Inspection and acceptance will occur at the destination, and the shipping terms are FOB Origin.
LAND SUPPLIER OPERATIONS SMSG

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GATE
Solicitation # SPE7MC-26-Q-0429
This contract is for the procurement of three non-magnetic 1.25 inch gate valves for use aboard Navy minesweep ships. The items are identified by NSN 4820-01-218-7172 and correspond to Newdell Company (dba Ladish) part numbers 8271-9044-12A and 8271-9044-GG01-A12A. The agreement is established as a Firm Fixed Price contract with a delivery requirement of 60 days after order. The hardware must adhere to strict material constraints, specifically prohibiting the intentional addition of mercury or mercury-containing compounds unless they are functional components specified by NAVSEA. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with final inspection and acceptance occurring at the destination. The supplies are to be shipped to DLA Distribution San Joaquin in Tracy, California.
DLA DIST SAN JOAQUIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M5-26-T-339A
The contract is for the procurement of electrical plug connectors identified by part number TV06RW21-121S and TV06RW21-121SN, supplied by AMPHENOL CORPORATION, with a National Stock Number of 5935-01-682-2509. A total quantity of 32 units is required at a unit price of $32.00, with total contract value reflecting this amount. Deliveries are to be made FOB origin with a strict zero percent quantity variance, inspected and accepted at the destination point. Packaging must comply fully with MIL-STD-2073-1E, including specific preservation methods, materials, and container codes, with marking adhering to MIL-STD-129. All packaging and palletization follows DLA’s RP001 requirements. The items are to be delivered to DLA Distribution Warner Robins at Robins Air Force Base, Georgia, with a required delivery date of November 8, 2026, and a target ship date of December 15, 2026, allowing for a 133-day lead time. Technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by solicitation or award date based on acquisition size. No special marking is required beyond standard compliance. Transportation details are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE7M5-26-T-339A, posted on July 21, 2026, with responses due by August 3, 2026, under NAICS code 334417 for electrical connector manufacturing, and is managed by the Department of Defense’s Active Devices Division with Andrew Bracken as the primary point of contact.
Electronic Connector Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, THERMAL
Solicitation # SPE7M5-26-T-460T
This contract is for the procurement of one thermal resistor, identified by NSN 5905-01-434-4584, under solicitation number SPE7M5-26-T-460T. The item is to be delivered to Dyess AFB within 20 days after receipt of the order. The agreement is managed by the Department of Defense Active Devices Division and requires adherence to specific DLA packaging and quality requirements, including the removal of government identification from non-accepted supplies. Quality assurance must follow MIL-STD-1916 or ASQ H1331 zero-based sampling plans, with specific verification levels and AQLs assigned to critical, major, and minor attributes. Additionally, the contractor must comply with IPC/JEDEC J-STD-609 for unit package marking regarding lead finish and follow the DLA Master List of Technical and Quality Requirements. Alternate offerors are required to provide a complete data package for both approved and alternate parts.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
CAPACITOR, FIXED, ELE
Solicitation # SPE7M5-26-T-015W
This contract solicitation is for the procurement of five fixed electronic capacitors under the National Stock Number (NSN) 5910015048592. The delivery location is specified as the DLA Distribution Depot in Oklahoma, with a delivery schedule of 157 days after order. The approved sources for this procurement include items identified as 01884 121D605X0014H1 and 01884 1813555-7. The solicitation is issued as a Request for Quotation (RFQ) and is accessible only electronically via the provided link; no hard copies, specifications, plans, or drawings are available. All responsible sources are invited to submit their quotes electronically, and all timely received submissions will be considered. The contract is managed by the Defense Logistics Agency Land And Maritime, part of the Department of Defense, with the office located in Columbus, Ohio. The solicitation number is SPE7M526T015W, with the posting date of April 6, 2026, and a response deadline set for April 17, 2026. This procurement falls under the NAICS code 334413, related to electronic component manufacturing. Any questions regarding the solicitation should be directed via email to the designated buyer as indicated in the solicitation document or through the website hosting the solicitation. The contracting process emphasizes electronic communication and submission to ensure timely and efficient handling of quotes.
Semiconductor and Related Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
New
DIBBS
SOLENOID SUBASSEMBLY
Solicitation # SPE7M5-26-Q-0982
This contract, identified as SPE7M5-26-Q-0982, is a firm fixed price agreement for the procurement of one solenoid subassembly, part number 80035333, with national stock number 5945-01-644-9900. The delivery is required within 148 days after the order is placed, with the final destination and acceptance point located at the Public Works Department in Rota, Spain. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and IPC/JEDEC J-STD-609 for component lead finish identification. Additionally, the contractor is prohibited from using Class I ozone depleting chemicals in the production of the item. All technical and quality requirements are governed by the DLA Master List, and the shipment must follow specific palletization and marking protocols to ensure compliance with government procurement standards.

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334417
New
DIBBS
FILTER SUBASSEMBLY
Solicitation # SPE7M5-26-T-389W
This solicitation, issued by the Department of Defense Active Devices Division, is for the procurement of 37 units of a filter subassembly under part number 5915-01-597-2683. The contract requires delivery within 168 days after the order is placed, with performance located in San Diego, California. The agreement mandates strict adherence to DLA packaging and quality requirements, including tailored higher level quality standards and the removal of government identification from non-accepted supplies. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional uses approved by NAVSEA. Additionally, alternate offerors must provide a complete data package for any proposed alternate parts.
Electronic Connector Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334419
New
DIBBS
SHIELDING GASKET, EL
Solicitation # SPE7M5-26-T-460P
This contract is for the procurement of 266 feet of shielding gaskets, identified by NSN 5999016874414 and part number EMS-12-F from Spira Manufacturing Corporation. The solicitation, numbered SPE7M5-26-T-460P, is issued by the Department of Defense Active Devices Division and is designated as a total small business set-aside under NAICS code 334419. The agreement specifies a delivery timeframe of 82 days with a required ship date of August 6, 2026. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E, and allows for a quantity variance of plus 0% and minus 10%.
Other Electronic Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE, N
Solicitation # SPE7M5-26-T-459W
This solicitation, issued by the Department of Defense Active Devices Division under solicitation number SPE7M5-26-T-459W, is for the procurement of 33 non-precision, non-wire wound variable resistors (NSN 5905-01-207-6970). The contract is designated as a Total Small Business Set-Aside under NAICS code 334416, with a delivery requirement of 392 days after order. Performance is centered at Robins Air Force Base. The agreement is subject to several strict regulatory and quality mandates. It requires compliance with DLA packaging standards, the removal of government identification from non-accepted supplies, and a total prohibition on Class I ozone-depleting chemicals. Furthermore, the contract mandates CMMC Level 2 certification and strict adherence to ITAR and EAR export controls regarding technical data. Access to such data is limited to approved contractors with US/Canada Joint Certification Program certification and completed DOD export-controlled training.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M5-26-T-459V
This contract is for the procurement of ten electrical receptacle connectors under NSN 5935-01-087-7478 and part number MS3401DJ15A-7P. The items are designated as critical application components and must comply with the Qualified Products List (QPL) and Qualified Manufacturers List (QML) requirements. Technical standards are governed by SAE AS50151 and SAE AS34011B, with strict prohibitions against the intentional addition of mercury and the use of Class I ozone-depleting substances unless specifically authorized. Delivery is required within 140 days, with a need date of February 2, 2027, shipping FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging and marking must adhere to MIL-STD-129, MIL-STD-2073-1E, and MIL-DTL-55330. The contract specifies a zero percent quantity variance and requires inspection and acceptance to take place at the destination.
Electronic Connector Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334413
New
DIBBS
SEMICONDUCTOR DEVICE, D
Solicitation # SPE7M5-26-T-460H
This contract is for the procurement of 25 semiconductor diode devices, identified by NSN 5961-01-067-2192 and part number 22D1004 from L3Harris Maritime Power and Energy. The order is managed under solicitation SPE7M5-26-T-460H with a required delivery date of April 22, 2027. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The supplier must adhere to strict quality and technical standards, including the DLA Master List of Technical and Quality Requirements and supply chain traceability documentation. Key compliance mandates include the use of qualified distributors and testing suppliers for FSC 5961 and 5962, adherence to MIL-STD-129 for marking, and compliance with IPC/JEDEC J-STD-609 for lead finish marking. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required by specific NAVSEA exceptions.
Semiconductor and Related Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
MICROCIRCUIT, LINEAR
Solicitation # SPE7M5-26-T-460G
This contract is for the procurement of one linear microcircuit, part number 350-0017-030, manufactured by Rockwell Collins, Inc. under NSN 5962-01-007-2802. The item falls under Federal Supply Class 5962 and requires strict adherence to quality and technical requirements, including the use of qualified suppliers from the QSLD and QTSL lists. Delivery is set for 154 days after the order, with the destination and acceptance point located in Columbus, Ohio. The contractor must comply with rigorous documentation and packaging standards. This includes providing supply chain traceability and test reports via DLA Land and Maritime Form 918 at least 15 days before the delivery date to receive shipping authorization. Packaging must meet MIL-STD-129 and MIL-PRF-81705 standards for electrostatic discharge and electromagnetic interference protection to prevent component damage. Additionally, the contractor must perform a CMMC Level 2 self-assessment and follow specific marking requirements for lead finish in accordance with IPC/JEDEC J-STD-609.
Other Electronic Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
MICROCIRCUIT, LINEAR
Solicitation # SPE7M5-26-T-460C
This contract is for the procurement of two linear microcircuits, specifically NSN 5962-01-645-1250, with a required delivery date of July 14, 2027. The acquisition falls under Federal Supply Class 5962 and requires the use of qualified suppliers and distributors. A critical component of this agreement is the strict adherence to supply chain traceability and counterfeit avoidance protocols, requiring the submission of DLA Land and Maritime Form 918 and supporting documentation for approval by the contract administrator at least 15 days prior to shipment. The contractor must comply with rigorous packaging and marking standards, including MIL-STD-129 and IPC/JEDEC J-STD-609 for lead finish identification. Due to the sensitive nature of the electronic components, the items must be handled and shipped using DOD qualified Electrostatic Discharge and Electromagnetic Interference protective materials in accordance with MIL-PRF-81705. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination in Columbus, Ohio.
Semiconductor and Related Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
RELAY, MOTOR DRIVEN
Solicitation # SPE7M5-26-Q-0968
This solicitation, numbered SPE7M5-26-Q-0968, is for the procurement of 165 units of motor driven relays under NSN 5945-01-659-2680 for the Department of Defense Active Devices Division. The contract requires delivery within 331 days after order and mandates strict adherence to source controlled drawings, meaning only approved sources cited on the drawing are permitted. The agreement incorporates several critical technical and quality requirements, including CMMC Level 2 certification, specific DLA packaging standards, and physical item marking. Furthermore, the contract is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized training to handle the associated technical data.
Relay and Industrial Control Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details