Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Pneumatic Beadlock Supply

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of four pneumatic beadlock devices identified by NSN 2530017072385, with full compliance required for packaging, labeling, and delivery according to military standards. These components are critical for specialized vehicle operations and must be delivered to the designated performance location at Camp Pendleton, California, with the zip code 92055-5584. The solicitation is structured as a subcontract under the NAICS code 336390, indicating its alignment with other transportation equipment manufacturing activities, and is issued by the Department of Defense through the Land Supply Chain organization. The opportunity was posted on August 5, 2026, with a response deadline set for August 17, 2026, allowing prospective contractors a limited window to submit proposals. All deliverables must meet exacting defense specifications to ensure operational readiness and interoperability within military fleets.

General Info

Supply four military-grade pneumatic beadlock devices to Camp Pendleton by August 17, 2026, meeting defense specs.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

336390 - Other Motor Vehicle Parts ManufacturingView NAICS

Place of Performance

CAMP PENDLETON, CA, 92055-5584, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 4 units of pneumatic beadlock devices (NSN: 2530017072385), including packaging, labeling, and delivery compliant with military standards.

Similar Contracts

Same NAICS industry code

Brake, Segmented Rotor Manufacturing and SupplyThe contract entails the manufacture and supply of a Brake, Segmented Rotor classified under NSN 2530015567155 under an IDIQ framework with FOB origin delivery terms, ensuring all products are shipped directly from the manufacturer's location without additional freight costs borne by the government. Compliance is strict and mandatory across military packaging, labeling, and hazardous materials handling standards to meet Department of Defense requirements for readiness and safety during transport and storage. The procurement is structured as a total small business set-aside under FAR 19.5, exclusively available to small businesses certified by the SBA, and assigned the NAICS code 336390 which covers other transportation equipment manufacturing. The solicitation was posted on August 5, 2026, with a response deadline of August 20, 2026, issued by the Strategic Acquisition Program Directorate under the Department of Defense, and all offers must be submitted through the designated DIBBS portal to be considered valid.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 20 hours ago

DEADLINE

Windshield Wiper Blade Supply and ManufacturingThe contract is for the manufacture and supply of two units of windshield wiper blades, each 19 inches in length, with part number F42706 and NSN 2540012811122, all of which must fully comply with the technical and quality standards established by the Defense Logistics Agency. The work is classified as a subcontract under NAICS code 336390, indicating it falls within the automotive parts manufacturing sector, and is issued under the authority of the Department of Defense through LSO Combat Vehicles and Armament. Performance of the contract is required at Aberdeen Proving Ground, Maryland, with a ZIP code of 21005-5001, ensuring alignment with military logistics and operational needs. The solicitation was posted on August 5, 2026, and responses must be submitted by August 17, 2026, providing a twelve-day window for qualified vendors to propose their capabilities and pricing. The contract is facilitated through the DIBBS platform, with the official solicitation accessible via the provided link. There is no set-aside designation specified, meaning the opportunity is open to all eligible subcontractors without preference for small businesses or other categories. Compliance with DLA’s exacting specifications is paramount to ensure the blades meet the durability, performance, and safety demands of military vehicles in operational environments.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 20 hours ago

DEADLINE

Vehicular Maintenance Kit Manufacturer or DistributorThe contract calls for the supply and delivery of a Vehicular Maintenance Kit with the National Stock Number 4910016835478, encompassing all necessary components, packaging, and labeling in full compliance with military standards. The item is a critical support element for vehicle maintenance operations and must meet rigorous defense specifications to ensure reliability and interoperability in operational environments. The requirement is structured as a subcontract and is exclusively reserved for Service-Disabled Veteran-Owned Small Businesses, as indicated by the SDVOSBC set-aside classification, ensuring procurement opportunities for qualified veteran-owned enterprises. The solicitation is managed by the Strategic Acquisition Program Directorate under the Department of Defense, with a posted date of August 5, 2026, and a response deadline of August 20, 2026. The manufacturing or distribution activity must align with NAICS code 336390, which pertains to other transportation equipment manufacturing, reflecting the specialized nature of the kit’s production. Performance of the contract will occur at an unspecified location, and all submitted proposals must demonstrate capability to deliver a fully compliant kit that meets or exceeds DoD quality and readiness benchmarks. The official solicitation window is accessible via the DIBBS platform using the provided link.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 20 hours ago

DEADLINE

COMPRESSOR, REFRIGERATI

Solicitation # SPE8E8-26-T-5010

This contract is for the procurement of one refrigeration compressor, identified by NSN 4130-01-578-8370 and purchase request 7017756959, with a total quantity of 19 units to be delivered in two line items—one unit and eighteen units respectively. All items must be delivered FOB origin within 137 days of the required delivery date of March 9, 2027, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must conform to ASTM D3951, subject to the overriding requirements of the DLA Master List of Technical and Quality Requirements. Packaging and labeling must comply with MIL-STD-129 and palletization must follow RP001 DLA Packaging Requirements. Mercury or mercury-containing compounds are strictly prohibited from direct contact with the hardware except for functional uses in batteries, fluorescent lamps, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Two delivery addresses are specified: one for Albany, Georgia, and another for Barstow, California, each with designated receiving points. Transportation procedures follow DLAD Proc Notes C19 and C20. The solicitation, issued under contract SPE8E8-26-T-5010, is a Service-Disabled Veteran-Owned Small Business Set-Aside with a response deadline of August 17, 2026, and is managed by the Department of Defense through the Albany Transportation Officer.

ALBANY TRANSPORTATION OFFICER

POSTED

about 20 hours ago

DEADLINE

ARM ASSEMBLY, PIVOT,

Solicitation # SPE7L1-26-T-921D

The item is an ARM ASSEMBLY, PIVOT, manufactured using a forging process that requires specialized tooling for production. The specification references Drawing 12473354, Revision H, dated 31 Jan 2018, with Note 6 mandating induction hardening per SAE-AMS 2745, identifying Advance Heat Treat Corp and LOC Performance Products as approved sources. The Defense Logistics Agency requires compliance with DLA packaging standards and strict export control protections under ITAR or EAR regulations, prohibiting any disclosure or transfer of technical data to foreign persons without prior government authorization. Access to this controlled data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by the DLA. The National Stock Number is 2530-01-588-7026, with a quantity of 47 units required under Purchase Request 7016888404, and delivery must be completed within 91 days of award. The solicitation SPE7L1-26-T-921D is a total small business set-aside under NAICS code 336390, issued by the Department of Defense’s Land Supply Chain, with responses due by August 17, 2026. Primary point of contact is Adam Howell, reachable via email and phone provided. Performance is to occur in New Cumberland, PA, with export compliance and cybersecurity certification requirements enforced through DLA protocols.

LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

BRAKE, SEGMENTED ROTOR

Solicitation # SPE7LX-26-U-9296

The contract solicitation SPE7LX-26-U-9296 seeks the procurement of 141 units of a segmented brake rotor, identified by NSN 2530-01-556-7156 and part number RDA-1550-951 from Meritor Heavy Vehicle Systems, LLC. This is a commercial item acquisition under a Total Small Business Set-Aside, with delivery required 145 days after award and FOB Origin terms applying, meaning the contractor bears all transportation costs and risks until the item reaches the designated destination. The contract specifies a guaranteed minimum quantity of 21 units and an estimated annual quantity of 141 units, with a maximum contract value of $350,000. Inspection and acceptance both occur at the destination, and items must be individually packaged per QUP=001 with packaging adhering to MIL-STD-2073-1E and DLA’s RP001 standards. All bare metal surfaces, moving parts, and threads must be protected using preservative code 89 to prevent corrosion, unless prohibited by operational incompatibility, difficulty of removal, or potential damage to the item. Packaging must include wrapping material GC to prevent abrasion and corrosion, and cushioning/dunnage material AD—such as solid fiberboard or rigid foam conforming to specified military and ASTM standards. Blocking and bracing must immobilize items within containers, with wood and plywood meeting strict ASTM and A-A-55057 specifications and engineered for easy removal. Marking must comply with MIL-STD-129, including barcoding and the special marking code ZZ specifying “ARROW UP OPEN THIS SIDE.” The contract incorporates extensive cybersecurity and compliance requirements, including DFARS 252.204-7012 for safeguarding covered defense information and cyber incident reporting, 252.204-7018 prohibiting acquisition of telecommunications equipment from designated foreign entities, and 252.223-7008 banning hexavalent chromium. Contractors must hold active UEI and CAGE codes, affirm small business status, and comply with whistleblower protections, former DoD official compensation rules, and hazardous material handling standards. Invoicing is mandatory through Wide Area WorkFlow, and payment acceleration is required for small business subcontractors. All technical and quality requirements are governed by the DLA Master List, with revisions effective

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 20 hours ago

DEADLINE

RING, STUB YOKE

Solicitation # SPE7LX-26-U-9334

The contract is for the procurement of RING, STUB YOKE with National Stock Number 2530-21-906-4056 under an indefinite-delivery contract (IDC) administered by the Defense Logistics Agency’s Strategic Acquisition Program Directorate. The estimated quantity is 326 units, with a guaranteed minimum of 48 units, and the total contract value is capped at $350,000. Delivery is required FOB origin within 102 days of order placement, with zero variance permitted on the quantity. Inspection and acceptance occur at the destination point, and compliance with all DLA Master List of Technical and Quality Requirements is mandatory, taking precedence over any other standards such as ASTM D3951. Packaging and labeling must adhere to MIL-STD-129 and the DLA Packaging Requirements for Procurement (RP001), with non-hazardous items requiring commercial packaging per ASTM D3951 unless superseded by the DLA Master List. Hazardous materials must comply with FED-STD-313 and the Hazard Communication Standard (29 CFR 1910.1200), and all hazardous material labeling must reflect applicable Federal statutes. The item is identified as a critical application item for General Dynamics Land Systems Canada and General Dynamics European Land Systems, and procurement must follow DoD’s authorized unit of issue per ANSI X12 specifications. The contract includes mandatory flow-down clauses related to small business program representation, employment eligibility verification, combating human trafficking, safeguarding contractor information systems, and sustainable products, all with deviation 2026-00038 applied. Authorization and consent rights are governed by Alternate I and Alternate II of FAR 52.227-1, and changes are managed under the fixed-price changes clause with the same deviation. Invoicing must be submitted through WAWF, with no alternative platforms permitted. Offerors are required to disclose their entity name, Unique Entity ID (UEI), and CAGE code, and to certify their small business status or other socioeconomic designations such as WOSB, SDVOSB, or HUBZone. The contract is non-binding until a delivery order is issued, and performance is subject to compliance with all technical, quality, and packaging requirements as defined in the referenced standards and the DLA Master List. The solicitation opens on August 5, 2026, and closes on August

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE8E9-26-Q-0659

The contract pertains to the procurement of 12 units of headlight assembly identified by NSN 6220-01-632-0311 under purchase request 7016375446, with a delivery requirement of 168 days after award. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the type of acquisition—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision current on the RFP issue date unless amended, in which case the amendment date governs. Packaging must comply with DLA Packaging Requirements for Procurement (RP001), and any non-accepted supplies must have government identification removed as per RQ011. The solicitation, open for response until August 12, 2026, was posted on August 5, 2026, under solicitation number SPE8E9-26-Q-0659, and is issued by the Department of Defense through the Construction & Equipment MRO Service I office, with Quiana Bowser designated as the primary point of contact for inquiries.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 20 hours ago

DEADLINE

TRAY, STOWAGE, VEHICULAR

Solicitation # SPE7L4-26-T-6014

The contract is for the procurement of nine vehicular tool stowage trays identified by NSN 2540-01-606-3670 under solicitation SPE7L4-26-T-6014, with a required delivery within 140 days of award. The item is governed by multiple technical and quality requirements incorporated from the DLA Master List, including packaging standards, export control of technical data subject to ITAR or EAR, and compliance with Qualified Products or Manufacturers Lists for components. Export-controlled technical data may only be accessed by contractors with approved US/Canada Joint Certification Program certification, completed DOD training on handling controlled data, and formal approval from DLA. Removal of government identification from non-accepted supplies is mandated, and all requirements are subject to the revision of the DLA Master List in effect on the solicitation issue date. The purchase is issued by the Department of Defense’s LSO Combat Vehicles and Armament office, with performance location in Tracy, California, and primary point of contact listed as Anna-Rachelle Betts. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and falls under NAICS code 336390 for other transportation equipment manufacturing.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 20 hours ago

DEADLINE

TRANSFER ASSEMBLY

Solicitation # SPE7L4-26-T-5991

DLA has issued a procurement contract under solicitation SPE7L4-26-T-5991 for the transfer assembly with NSN 2540-01-412-7836, requiring five units to be delivered within 20 days of award. The delivery is FOB destination, with no variance allowed in quantity, and inspection and acceptance occur upon arrival at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, overriding ASTM D3951, and must conform to MIL-STD-129 labeling and RP001 packaging standards. Hazardous materials must follow TQ requirement IP025 per FED-STD-313; non-hazardous items must be commercially packaged accordingly. All packaging must specify the correct Unit of Issue and Quantity per Unit Pack as stipulated. The delivery address is APO AE 09494-4640, with an alternate freight shipping address at RAF Fairford, Gloucester, UK, and transportation must adhere to DLAD PROC NOTES C19 and C20. The contract mandates the removal of government identification from non-accepted supplies and requires packaging to be palletized per RP001. The original required delivery date is August 3, 2026, with a solicitation response deadline of August 17, 2026, and the primary point of contact is Anna-Rachelle Betts, reachable via DLA email and phone. The NAICS code is 336390, and this is a federal procurement under the Department of Defense for Combat Vehicles and Armament.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE7M2-26-T-6030

The contract specifies the procurement of 64,020 washer, lock items identified by NSN 5310-01-145-4564 under solicitation SPE7M2-26-T-6030, with delivery required within 161 days to the DLA Distribution Anniston facility in Anniston, Alabama. The item is classified as a commercial item and must comply strictly with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 for marking, with preservation method code 10 allowing packaging per ASTM D3951. Packaging must avoid mercury or mercury compounds in all stages including preservation, packaging, and marking, with exceptions only for functional uses in batteries, lighting, instruments, weapon systems, or specific reagents as defined by NAVSEA, and portable devices containing mercury must have shockproof construction with a secondary containment barrier. All supplies must be delivered FOB origin with zero variance allowed in quantity, inspected and accepted at destination, and palletized according to DLA standards. The contract includes a strict prohibition on the intentional introduction of mercury in any component or material, enforced through the DLA Master List of Technical and Quality Requirements referenced in the document. The delivery deadline is June 25, 2027, with a needed ship date of January 26, 2027, and unit pricing is set at a total contract value derived from the quantity and unit cost. The procurement is managed by the Department of Defense’s Nuclear Reactor Program, with point of contact David Larsen at DLA.

NUCLEAR REACTOR PROGRAM

POSTED

about 20 hours ago

DEADLINE

EQUIPMENT KIT, VEHIC

Solicitation # SPE7L3-26-T-150B

The contract pertains to the procurement of two units of an Equipment Kit, Vehicle, identified by NSN 2541-01-727-9469, under solicitation SPE7L3-26-T-150B, with a response deadline of August 17, 2026, and a required delivery window of 219 days after award. Full and open competition is authorized, and the acquisition falls under NAICS code 336390, managed by the Department of Defense's Land Supplier Operations Vehicle Support. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue or award date depending on the acquisition size. Packaging must comply with DLA requirements, and any non-accepted supplies must have government identification removed. The use of Class I ozone-depleting chemicals is strictly prohibited, superseding any conflicting specification language, and substitutes require prior approval unless explicitly permitted by the specification. Additionally, all supplied items must be completely free of asbestos; any parts previously containing asbestos are unacceptable, and alternative materials must be approved under Clause L30 and Provision 4 conditions. The point of contact for inquiries is Kayla Buchanan, reachable via email or phone, with performance designated for New Cumberland, Pennsylvania, 17070-5002.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

Data retrieval failedA subcontract opportunity has been posted with a response deadline of August 17, 2026, and was made available on August 5, 2026, under the agency name LAND SUPPLY CHAIN within the Department of Defense. The place of performance is identified as New Cumberland with a zip code of 17070-5002, though no specific city or state details are provided beyond that. The solicitation number is SPE7L126T919X, and the opportunity is accessible via the DIBBS platform. However, critical contract details such as the NAICS code, type of set aside, organization type, and point of contact are unavailable. Attempts to retrieve subcontract-specific data have failed due to gateway timeout errors, preventing full decomposition of the opportunity and limiting visibility into underlying prime contract information or award specifics.

POSTED

about 20 hours ago

DEADLINE

Packaging, Labeling, and Shipping of Defense SuppliesThe contract requires compliant packaging, labeling, and shipment of mounting plates in accordance with DLA standards, specifically MIL-STD-129 for military labeling, ASTM D3951 for commercial packaging, and RP001 palletization guidelines to ensure uniformity and readiness for military logistics. All work must adhere strictly to these specifications to guarantee proper identification, handling, and traceability throughout the defense supply chain. The items are to be delivered to a designated performance location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, ensuring alignment with DLA’s logistical infrastructure and warehouse reception protocols. This is a subcontract solicitation under NAICS code 493190, issued by the Department of Defense through the Land Supply Chain organization, with a response deadline of August 19, 2026. The solicitation is open for submissions and requires contractors to demonstrate capability in meeting rigorous defense packaging and transportation benchmarks. The absence of set-aside designation suggests it is open to all qualified small and large businesses, and all proposals must be submitted via the DIBBS portal using the provided link before the deadline to be considered for award.

Other Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

Precision Metal Fabrication of Mounting PlatesThe contract calls for the manufacture and delivery of ten precision mounting plates specified under NSN 5340-01-590-0080, with strict adherence to military specifications governing design, material composition, and dimensional tolerances. Full material traceability is required throughout the production process, ensuring every batch of raw material can be linked to its origin and certification, and facility change controls must be implemented to document and approve any alterations to manufacturing methods, equipment, or locations to maintain consistency and quality. Performance is designated for New Cumberland, Pennsylvania, with the work falling under NAICS code 332722 for other metal forging and stamping operations. This is a subcontract opportunity issued by the Department of Defense through the Land Supply Chain, with a response deadline of August 19, 2026, and the solicitation posted on August 5, 2026. The effort requires compliance with defense production standards, emphasizing quality assurance, documentation integrity, and operational control to support military equipment systems. All production activities must be executed under conditions that ensure repeatable precision and regulatory alignment, with no deviations permitted without formal approval and recordkeeping.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 20 hours ago

DEADLINE

Hazard Communication and Safety Data ComplianceThe contract requires the preparation and submission of hazard warning labels and Safety Data Sheets for gasket materials, ensuring full compliance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and MIL-STD-129 labeling requirements. All documentation must be finalized and submitted prior to award, directly to the contracting officer, to meet regulatory and military specifications for chemical safety and product identification. The work pertains to gasket materials used in defense applications and demands precise adherence to federal safety and labeling protocols to ensure proper handling, storage, and use across military supply chains. This subcontract is issued under the NAICS code 541620, associated with scientific and technical consulting services, and is managed by the Department of Defense through the LAND SUPPLY CHAIN organization. Performance is centered at Fort Leonard Wood, Missouri, with a response deadline of August 17, 2026, and the posting date of August 5, 2026. The solicitation is accessible via the DIBBS platform, and successful bidders must demonstrate proven capability in hazard communication, SDS authoring, and military labeling compliance. No set-aside preferences are specified, making this opportunity open to all eligible subcontractors capable of meeting the stringent technical and regulatory standards outlined.

Environmental Consulting Services

POSTED

about 20 hours ago

DEADLINE

Military Packaging and Labeling ServicesThe contract requires the provision of compliant packaging, preservation, and labeling of gaskets in accordance with military specifications, ensuring readiness for Department of Defense logistics and storage. All gaskets must be sealed in waterproof bags and preserved using Preservation Method 33, designed to protect against corrosion and environmental degradation during extended storage and transit. Labeling must strictly adhere to MIL-STD-129 requirements, incorporating 2D barcodes and accurate National Stock Number and Contract Line Item Number data to enable seamless tracking and inventory management across military supply chains. Performance of this subcontract is designated for Fort Leonard Wood, Missouri, with a response deadline of August 17, 2026, and a posting date of August 5, 2026. The North American Industry Classification System code 561910 indicates the work falls under other support activities for agriculture and mining, highlighting the specialized nature of the packaging and preservation services required. The contract is issued under the Land Supply Chain division of the Department of Defense, emphasizing its role in supporting critical defense logistics infrastructure and ensuring that gaskets meet stringent readiness standards for military deployment.

Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

Gasket Supply and ManufacturingThe contract calls for the manufacture and delivery of precision gaskets with National Stock Number 5330014668523, fully compliant with MIL-DTL-117 and MIL-STD-2073-1E specifications. This includes end-to-end responsibility for material sourcing, fabrication, rigorous quality control processes, and military-grade packaging to ensure operational readiness and environmental protection during transport and storage. All work must adhere to strict defense standards, with documentation and inspection protocols in place to validate compliance at every stage of production. The contract is a subcontract under the Department of Defense, managed by LAND SUPPLY CHAIN, with performance required at Fort Leonard Wood, Missouri, 65473-8947. It was posted on August 5, 2026, with proposals due by August 17, 2026. The North American Industry Classification System code is 332996, indicating specialization in other fabricated metal product manufacturing. The procurement is part of a broader defense logistics initiative and requires adherence to federal acquisition regulations, with no set-aside provisions specified. All deliverables must meet military readiness criteria and be traceable through documented quality assurance records.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 20 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires full adherence to the OSHA Hazard Communication Standard (29 CFR 1910.1200) for all hazardous materials involved in production or packaging operations. This includes the accurate generation and application of hazard labels in compliance with GHS requirements and the prompt submission of Material Safety Data Sheets (MSDS) for each chemical used. All activities must ensure worker safety and regulatory compliance throughout the lifecycle of material handling and use. The work is to be performed at the designated location in Greensboro, North Carolina, with a zip code of 27409, under a subcontract arrangement managed by the Department of Defense through the LAND SUPPLY CHAIN organization. The solicitation was posted on August 5, 2026, with a mandatory response deadline of August 17, 2026. The NAICS code 541690 identifies this as an other scientific and technical consulting service, reflecting the specialized nature of the compliance and documentation services required. The contract does not specify a set-aside classification or point of contact, and the place of performance is limited to the Greensboro site without additional location details. Respondents must meet all federal safety standards and deliver documentation accurately and on time to satisfy contractual obligations.

Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

Defense-Compliant Packaging and Marking ServicesThe contract requires delivery of military-compliant packaging and labeling services aligned with DLA RP001, MIL-STD-2073-1E, and MIL-STD-129 standards, encompassing the full preparation of items for defense shipment including thorough cleaning and drying processes, adherence to specified container specifications, and proper marking and documentation for FOB origin shipment. All work must meet rigorous Department of Defense requirements to ensure durability, traceability, and compliance throughout the supply chain. The performance location is designated as Greensboro, North Carolina, with a zip code of 27409, and the work falls under NAICS code 423840 for wholesale trade of machinery and equipment. The solicitation is issued as a subcontract under the Land Supply Chain division of the Department of Defense, with a posted date of August 5, 2026, and a firm response deadline of August 17, 2026. Interested parties must submit proposals through the DIBBS platform using the provided solicitation link, and all deliverables must be fully compliant with federal military packaging and marking regulations to qualify for award. There is no set-aside designation or special procurement category specified, and the contract does not include a designated point of contact, requiring vendors to navigate the solicitation details directly through the provided online portal.

Industrial Supplies Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Helical Torsion Spring ManufacturingManufacture 2,250 helical torsion springs according to technical drawing 19207 7521423 Rev B Gen 2 for critical Department of Defense applications requiring adherence to the highest quality and regulatory compliance standards. The springs must be produced to precise engineering specifications to ensure operational reliability in mission-critical systems, with all work subject to rigorous inspection and documentation protocols. The contract is issued as a subcontract under NAICS code 332613 and performance must occur at Greensboro, North Carolina, 27409. Bidders must submit proposals by August 17, 2026, with the solicitation posted on August 5, 2026, under the oversight of the Land Supply Chain division of the Department of Defense. Full compliance with defense acquisition regulations, material traceability, and quality assurance procedures is mandatory throughout production and delivery.

Spring Manufacturing

POSTED

about 20 hours ago

DEADLINE

Supply of Installer, Bushing (End-Item Manufacturer or Distributor)The contract involves the manufacture or supply of a single bushing installer as a finished end item that must fully comply with applicable military or federal specifications. The item must be delivered in complete, ready-to-use condition and meet all technical, quality, and performance standards required by defense procurement guidelines. The contractor is responsible for ensuring compliance with hazardous materials disclosure and labeling requirements, including proper documentation and placement of safety and regulatory markings per federal mandates. The solicitation is classified as a subcontract under NAICS code 332999, with a response deadline of August 17, 2026, and a posted date of August 5, 2026. Performance is required at Fort Riley, Kansas, with a specific zip code of 66442-0345. The contracting agency is the Department of Defense through the Land Supply Chain organization. No set-aside preferences are indicated, and no point of contact details are provided in the posting. All submissions must be made through the designated DIBBS platform using the provided link.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 20 hours ago

DEADLINE

Supply of Fluid Filter (NSN: 2910-01-546-4764; P/N: FF5289)

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 20 hours ago

DEADLINE

Small Business & Socioeconomic Certification SupportThe contract seeks support services to assist offerors in obtaining and maintaining small business and socioeconomic certifications essential for eligibility in federal set-aside programs, including Women-Owned Small Business (WOSB), Service-Disabled Veteran-Owned Small Business (SDVOSB), and HUBZone certifications. The work focuses on guiding applicants through the complex application and verification processes required by federal agencies to meet certification standards and ensure compliance with program requirements. The contract is classified as a subcontract under NAICS code 541611, which pertains to management consulting services, and is issued by the Department of Defense through the LAND SUPPLY CHAIN organization. Performance is slated to occur at Camp Pendleton, California, with a response deadline of August 17, 2026, and the solicitation was posted on August 5, 2026. The effort is designed to enhance contractor readiness for government contracting opportunities reserved for certified small businesses, with no specific set-aside type indicated in the solicitation details.

Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE