Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Pole and Stanchion Maintenance and Replacement

Active

State & Local

Response Deadline09/04/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the repair or replacement of support poles and stanchions for driving range nets, requiring a comprehensive structural assessment to determine the condition and integrity of existing components, along with the necessary installation of new or refurbished hardware. Work must ensure the safety and functionality of the netting system, addressing corrosion, wear, or structural failure that may compromise performance or pose a risk to users. All materials and workmanship must meet industry standards for outdoor, high-stress environments. The contract is classified as a subcontract under NAICS code 332312, titled Metal Structural Framing, and is issued by the Massachusetts DCRCU – DCR CONTRACTS UNIT. The place of performance is specified as Boston, Massachusetts, with a ZIP code of 02116. Bids must be submitted by the response deadline of September 4, 2026, at 8:00 PM Eastern Time, following the posting date of July 27, 2026. No set-aside provisions are indicated, and the contract is open to qualified subcontractors capable of performing the full scope of structural maintenance and hardware replacement as described.

General Info

Repair or replace driving range support poles and stanchions in Boston, Massachusetts, meeting industry standards for safety and durability.

Agency

Massachusetts → DCRCU - DCR CONTRACTS UNITView Agency

NAICS

332312 - Fabricated Structural Metal ManufacturingView NAICS

Place of Performance

Boston, MA, 02116, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineSep 4

Submission deadline

Response Deadline

09/04/2026, 08:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMassachusetts → DCRCU - DCR CONTRACTS UNIT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Massachusetts → DCRCU - DCR CONTRACTS UNIT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Repair or replacement of support poles and stanchions for driving range nets, including structural assessment and hardware replacement.

Similar Contracts

Same NAICS industry code

ROD ASSEMBLY, ADJUST

Solicitation # SPE8ED-26-T-1201

The contract pertains to the procurement of one adjustable rod assembly with NSN 5410-01-573-9909 under solicitation SPE8ED-26-T-1201, issued by the Department of Defense through the Defense Logistics Agency. The item must be delivered within five days to the US Army SSA POWIDZ AB facility in Poland, with delivery terms FOB origin and no tolerance for quantity variance. The rod assembly must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede other standards like ASTM D3951, and must be packaged and marked per MIL-STD-129 and DLA packaging guidelines, including palletization per RP001. The item is subject to strict prohibitions against intentional mercury content except in specified exempted applications, which must meet Navy specification NAVSEA 5100-003D with secondary containment. Identification marking must follow MIL-STD-130N, and all documentation requirements for source approval, including SAR procedures, are binding. The product is to be furnished by HIAB USA INC or G.T. Machining & Fabricating Ltd. under part number 111955401. Transportation and shipment routing are governed by DLAD PROC NOTES C19 and C20, and the shipment is classified as RDD 999/NMCS with a designated mark for shipment reference. The required delivery date is August 3, 2026, and the contract includes specific government-use identifiers and point of contact information for oversight.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Solicitation # SPE7M2-26-T-5916

The contract pertains to the procurement of 188 units of a knob identified by NSN 5355-01-056-0066 under solicitation SPE7M2-26-T-5916, with a response deadline of August 10, 2026, and a required delivery within 168 days after award. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which incorporates specific technical and quality standards marked with R or I identifiers, with applicable revisions determined by the solicitation or award date depending on the acquisition size. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to the hardware or supplies, except for functional uses in batteries, fluorescent lamps, specified instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA; portable items containing mercury must be shock-proof and feature a secondary containment barrier as mandated by NAVSEA 5100-003D. The use of Class I ozone-depleting substances is expressly prohibited, aligning with DLA policy established in 1993. The contract is issued by the Department of Defense’s Nuclear Reactor Program, with performance required at Tracy, California, 95304-5000, and primary point of contact is David Larsen, reachable via email and phone provided.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

BEAM, STRUCTURAL

Solicitation # SPE8E4-26-Q-0339

The contract pertains to a structural beam made of titanium alloy, compliant with MIL-T-81556 specification, annealed condition, measuring 2.500 inches in height, 4.500 inches in width, and 0.090 inches in thickness, with a total length of 17 feet as specified in the purchase request. The item is identified by NSN 9540-01-435-5251 and is subject to delivery within 30 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation or award date depending on acquisition size. Packaging must adhere to DLA’s procurement packaging standards, and the item is subject to export control under ITAR or EAR, meaning any disclosure of technical data to foreign persons—regardless of location—requires prior authorization from the Department of State or Department of Commerce. Access to this controlled data is restricted to DLA contractors with approved US/Canada Joint Certification Program certification, completion of required training on handling DOD export-controlled data, and formal approval from the DLA controlling authority. The solicitation is issued by the Defense Logistics Agency under number SPE8E4-26-Q-0339, with a response deadline of August 3, 2026, and points of contact for inquiries are listed. Additionally, the procurement involves covered defense information and requires compliance with DFARS 252.225-7048 regarding export-controlled technical data.

Defense Logistics Agency

POSTED

DEADLINE

DOOR, METAL, MARINE S

Solicitation # SPE7M5-26-Q-0800

The contract is for a single marine structural metal door, identified by NSN/Part Number 2040-00-912-5774, with a delivery requirement of 176 days after contract award. The solicitation, numbered SPE7M5-26-Q-0800, was posted on July 30, 2026, with responses due by August 7, 2026, and falls under NAICS code 332312 for metal window and door manufacturing. The work is to be performed in Virginia Beach, Virginia, under the oversight of the Department of Defense’s Active Devices Division. The contract requires compliance with cybersecurity standards as certified by a CMMC Level 2 accredited third-party assessment organization and adherence to DLA packaging requirements for procurement. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any export, including disclosure to foreign persons within or outside the U.S., without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with approved JCP certification, completed training on handling export-controlled data, and approved access by DLA may receive it. Primary point of contact for inquiries is Karen Collins, reachable via email and phone provided in the contract details.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Solicitation # SPEFA1-26-Q-0098

The contract pertains to the procurement of five units of a weld assembly identified by part number 1660-LN-003-5530 under solicitation SPEFA1-26-Q-0098, issued by the Defense Logistics Agency Fleet Readiness Southwest. The item is priced at a firm fixed price with no variance allowed in quantity, meaning exactly five units must be delivered with no tolerance for over or under shipment. Delivery is required within one day after award date, with both inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 unless overridden by DLA’s Master List of Technical and Quality Requirements, and all packaging and labeling must adhere to MIL-STD-129 with palletization following RP001 DLA packaging standards. The unit of issue is each, and the quantity per unit pack is defined in the contract. The delivery destination for freight is Building 660, Bay 3, Rogers Road, Naval Base Coronado, San Diego, CA, while the parcel post address is PO Box 357058, Naval Air Station North Island, San Diego, CA. The required delivery date is October 30, 2026, and the purchase request number is 7017692202. All technical and quality specifications referenced including RA001, RP001, ZQA03, ZD080, RQ017, RQ039, RQ009, RS002, and RQ025 are incorporated by reference. The point of contact for this solicitation is Cynthia Liles, reachable via phone and email provided.

DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

DEADLINE

in about 6 hours

Adjustable Alleyway System FabricationThe contract seeks fabrication of an adjustable alleyway system designed to interface seamlessly with an existing main chute, ensuring safe and efficient handling of livestock across a broad spectrum of sizes. The system must be engineered for durability, ease of adjustment, and animal welfare compliance, enabling operators to securely guide cattle without risk of injury or stress. The design must accommodate varying animal dimensions while maintaining structural integrity under field conditions typical of agricultural and research environments. Manufacturing and delivery of the system are to be completed under a subcontract framework, with performance required at Pullman, Washington, where the equipment will be integrated into USDA ARS AFM APD facilities. The proposal must align with NAICS code 332312, indicating specialization in fabricated metal product manufacturing, and respond no later than August 7, 2026. While no set-aside provisions are specified, the submission must demonstrate technical capability, quality control practices, and experience with livestock handling equipment to meet the operational demands of federal agricultural research.

USDA Ars Afm Apd

POSTED

DEADLINE

Structural Steel Support Fabrication and WeldingThe contract pertains to the fabrication and welding of structural steel components including posts, frames, and brackets designed for signage mounting, requiring strict adherence to AWS D1.1 and AISC standards to ensure structural integrity and safety. Work must be performed to precise engineering specifications, with emphasis on quality control, material selection, and welding techniques that meet industry-recognized benchmarks for load-bearing applications. The scope implies a focus on durable, field-ready assemblies suitable for outdoor and high-traffic environments. This is a subcontract opportunity posted by the Michigan agency DTMB with a NAICS code of 332312, indicating specialized metal fabrication services. The solicitation was posted on July 30, 2026, and responses are due by August 12, 2026. Performance will occur at various locations without a designated primary city or state, suggesting multiple sites across Michigan or beyond. There is no set-aside classification specified, and while no point of contact is listed, all submissions must be made through the provided Michigan government portal. Interested parties must ensure full compliance with technical standards and delivery timelines to be considered.

POSTED

DEADLINE

Supply of Drainage Materials (Pipes, Grates, Inlets)The contract involves the supply of drainage materials critical for field rehabilitation efforts, including corrugated metal pipe, high-density polyethylene pipe, precast concrete structures, grates, and inlets. These components are essential for maintaining and upgrading stormwater infrastructure, ensuring proper water flow and structural integrity in transportation-related projects. The solicitation is classified as a subcontract under NAICS code 332312, which corresponds to prefabricated metal building manufacturing, indicating the specialized nature of the materials required. The opportunity was posted on July 29, 2026, with a response deadline of August 25, 2026, giving potential suppliers approximately four weeks to prepare and submit proposals. The contracting entity is the Georgia Department of Transportation, which will oversee the delivery and use of these materials across its drainage rehabilitation initiatives. While specific performance locations and point of contact details are not provided, the work is expected to occur within Georgia. Interested parties can access more information through the official link provided for the electronic request for quotation system.

Department of Transportation

POSTED

DEADLINE

Structural Steel Fabrication and ErectionThe contract pertains to the fabrication and on-site erection of structural steel components for construction projects under the San Diego Unified School District. Work will be performed in San Diego, California, with a specific performance zip code of 92124, and encompasses the full scope of manufacturing steel elements as well as their assembly at designated project sites. The NAICS code 332312 identifies this as a specialty trade contractor activity focused on structural steel fabrication and erection, indicating the specialized nature of the required work. This is a subcontract opportunity with a response deadline of August 20, 2026, at 9:00 PM Pacific Time, and it was posted on July 29, 2026. All submissions must be completed through the provided BidAmerica portal before the deadline to be considered.

San Diego Unified School District

POSTED

DEADLINE

Precision Fastener Supply – Machine ScrewsThe contract calls for the supply of 3,000 precision machine screws that must fully comply with military specifications, ensuring rigorous quality, dimensional accuracy, and material integrity required for defense applications. All items must be delivered with compliant packaging, proper marking, and complete documentation to meet the Defense Logistics Agency’s acceptance criteria, which includes traceability, labeling, and certification standards essential for military procurement. The requirement is issued as a subcontract under the NAICS code 332312, indicating it involves the manufacturing of industrial fasteners and related hardware. The solicitation was posted on July 29, 2026, with a firm response deadline of August 6, 2026, and is managed by the Aviation Supply Chain ESOC Buys team under the Department of Defense. There is no set-aside designation, meaning all eligible contractors may bid. The place of performance and point of contact details are not specified, but the contract will be processed through the DIBBS system, and successful vendors must be prepared to fulfill all technical, administrative, and logistical demands to ensure seamless integration into the defense supply chain.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Structural Fittings Manufacturing and SupplyThe contract requires the manufacture and supply of fifteen units of Structural Fitting with National Stock Number 1560-01-649-2616, all of which must fully comply with the Department of Defense’s technical specifications, quality requirements, packaging standards, and strict traceability protocols set by the Defense Logistics Agency. The work is scoped as a subcontract under NAICS code 332312 and is being managed by the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. All deliverables must meet rigorous defense-grade compliance criteria to ensure suitability for military use, with emphasis on documentation, material sourcing, and quality control throughout the production lifecycle. Bids are solicited with a response deadline of August 11, 2026, and the opportunity was posted on July 29, 2026. There is no set-aside designation specified, and the place of performance has not been defined, indicating flexibility in manufacturing location provided all contractual obligations are met. The procurement is being handled through the DIBBS system, and interested parties must access the full solicitation via the provided UI link to obtain detailed technical documentation and submission guidelines. Compliance with DLA standards is non-negotiable, and failure to meet traceability or quality benchmarks will result in disqualification or contract termination.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Welder’s Helmet SupplyThe contract is for the procurement and delivery of commercial off-the-shelf welder’s helmets to meet Department of Defense standards, with all items required to comply with DoD labeling and shipment regulations. The solicitation is issued under the NAICS code 332312 for other fabricated metal product manufacturing and is structured as a subcontract, targeting suppliers capable of providing compliant protective equipment without custom engineering. Delivery must be made to the specified place of performance in New Cumberland, Pennsylvania, with the zip code 17070-5002, and all shipments must align with DoD logistical protocols to ensure traceability and uniformity across military supply chains. The opportunity was posted on July 29, 2026, with a firm response deadline of August 10, 2026, giving potential vendors approximately two weeks to submit proposals. The contracting entity is the DDSP New Cumberland Facility under the Department of Defense, indicating this requirement supports military or defense-related operations. While no specific set-aside designation is indicated, the contract is accessible to general commercial vendors provided they meet the technical and regulatory requirements. The official solicitation can be accessed through the DIBBS portal, and all submissions must adhere strictly to DoD compliance standards for labeling, packaging, and documentation to ensure acceptance and timely fulfillment.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

More opportunities from Massachusetts → DCRCU - DCR CONTRACTS UNIT

Same awarding agency

Yearly Preventive Maintenance Program ImplementationThe contract is for the implementation of a Yearly Preventive Maintenance Program aimed at extending the lifespan of net systems through scheduled inspections, cable tightening, wear assessment, and thorough documentation. This subcontract requires the contractor to perform comprehensive maintenance tasks on an annual basis, ensuring operational integrity and reducing long-term degradation of the systems. The work is to be performed at a location in Boston with a zip code of 02116 and is classified under NAICS code 541370, indicating it pertains to other scientific and technical consulting services. The solicitation was posted on July 27, 2026, with a response deadline of September 4, 2026, and is managed by the DCRCU - DCR CONTRACTS UNIT under the Commonwealth of Massachusetts. All maintenance activities must be completed in accordance with established protocols and documented appropriately to support accountability and system longevity.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

in about 1 month

Emergency Storm and Wind Damage ResponseThe contract titled Emergency Storm and Wind Damage Response is a subcontract for rapid-response repair services following severe weather events that compromise netting, poles, or cables. It mandates 24/7 availability and fast mobilization to ensure timely restoration of critical infrastructure after storms or high winds. The work is to be performed in Boston with a zip code of 02116, and the service must be delivered with urgency to minimize disruptions and safety hazards caused by damage. The North American Industry Classification System code is 238990, indicating it falls under other specialty trade contractors. The solicitation was posted on July 27, 2026, with a response deadline of September 4, 2026, at 8:00 PM, and the contracting agency is the DCRCU - DCR CONTRACTS UNIT under the Commonwealth of Massachusetts.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month

Seasonal Net Installation and RemovalThe contract entails the seasonal installation and removal of driving range nets at a facility in Boston, requiring precise coordination with on-site operations to ensure minimal disruption to daily activities. Work must be completed at the beginning and end of each season, involving the safe handling, transport, and secure mounting of large, heavy net arrays under strict safety protocols. The scope demands experienced personnel familiar with high-volume outdoor sports facility maintenance and the logistical challenges of deploying and dismantling extensive netting systems in a public setting. This subcontract is issued by the Massachusetts DCRCU - DCR CONTRACTS UNIT and is set to close for responses on September 4, 2026, with the solicitation posted on July 27, 2026. The NAICS code 238990 classifies this as other heavy and civil engineering construction, indicating the project falls under specialized structural installation services rather than standard maintenance. Performance is localized to Boston, with a ZIP code of 02116, and bidders must demonstrate capacity to meet seasonal timelines, adhere to safety standards, and operate efficiently within an active facility environment without compromising public safety or operational flow.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month

Driving Range Net Repair and ReplacementThe contract entails routine and corrective maintenance for driving range net systems, covering the repair or replacement of netting, guy wires, and all associated hardware necessary to ensure structural integrity and operational safety. Work must be performed at the designated location in Boston, Massachusetts, with a primary focus on sustaining the functionality and durability of the net systems used in driving ranges. This subcontract is categorized under NAICS code 332439, indicating it falls within the miscellaneous fabricated metal product manufacturing sector, and is issued by the DCRCU - DCR CONTRACTS UNIT under the Commonwealth of Massachusetts. The solicitation was posted on July 27, 2026, with a response deadline set for September 4, 2026, at 8:00 PM. All bids or proposals must be submitted by this time to be considered. The place of performance is specified as Boston with a zip code of 02116, and while no point of contact or set-aside details are provided, contractors should be prepared to meet the technical and logistical demands of on-site maintenance, including access to the facility, adherence to safety protocols, and timely response to repair needs. The contract does not indicate any special certifications or eligibility requirements beyond standard subcontracting compliance.

Other Metal Container Manufacturing

POSTED

DEADLINE

in about 1 month

Supplier Diversity & SBPP Program SupportThe contract supports the prime contractor in achieving Massachusetts Small Business Participation Program goals by facilitating meaningful participation from Minority-Owned, Women-Owned, and Disadvantaged Business Enterprises as subcontractors. The scope includes active management of supplier diversity initiatives, ensuring compliance with state-mandated subcontracting targets, and maintaining accurate, timely reporting on supplier diversity metrics to meet state requirements. The work is centered in Boston with a focus on fostering inclusive economic opportunities through equitable subcontracting practices and transparent documentation. The effort requires engagement with diverse suppliers across various industries to meet participation benchmarks and sustain compliance throughout the contract term. The response deadline is September 18, 2026, and the North American Industry Classification System code is 812990, indicating services related to other personal service activities. This subcontract is managed under the DCR Contracts Unit of the Commonwealth of Massachusetts and is essential for ensuring alignment with state procurement policies promoting diversity and equity in public contracting.

All Other Personal Services

POSTED

DEADLINE

in about 2 months

Digital Accessibility ComplianceThe contract requires full compliance with ADA and Section 508 accessibility standards, mandating that all digital content and systems adhere to WCAG 2.1 AA or higher guidelines. This subcontract is focused on ensuring digital accessibility across platforms, tools, and media used by the Massachusetts agency, with performance centered in Boston, 02116. The NAICS code 541512 indicates the work falls under custom computer programming services, suggesting the contractor will be responsible for developing, modifying, or auditing software and digital interfaces to meet mandated accessibility requirements. The solicitation was posted on July 27, 2026, with a response deadline of September 18, 2026, giving potential bidders approximately six weeks to submit proposals. The contracting agency is the DCRCU – DCR CONTRACTS UNIT, which is part of the Massachusetts state government structure. There is no set-aside classification specified, meaning the opportunity is open to all eligible vendors regardless of business size or type. The place of performance is fixed in Boston, and while no point of contact is listed, submissions must be made through the provided CommBuys portal link to be considered.

Computer Systems Design Services

POSTED

DEADLINE

in about 2 months

Data Privacy & HIPAA Compliance SupportThis contract requires comprehensive support for ensuring the handling of protected health information aligns with HIPAA regulations, emphasizing the implementation of robust data privacy safeguards and the facilitation of Business Associate Agreements. The work is focused on maintaining compliance within a healthcare environment, where secure management of PHI is critical, and involves establishing policies, procedures, and technical controls to protect sensitive health data from unauthorized access, disclosure, or breach. The contractor will be expected to provide expert-level assistance in navigating HIPAA requirements and supporting contractual obligations related to data protection. The contract is positioned as a subcontract under the DCRCU - DCR CONTRACTS UNIT in Massachusetts, with performance required in Boston, specifically at the 02116 zip code. It was posted on July 27, 2026, with a response deadline of September 18, 2026, and falls under NAICS code 541611, indicating services related to administrative management and general management consulting. There is no specified set-aside type, and the solicitation number is not provided. Participation requires adherence to federal privacy standards and a demonstrated capability to deliver HIPAA-compliant solutions within a state-agency context, with an emphasis on practical, enforceable data governance practices.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

in about 2 months

Environmental Compliance & Regulatory ConsultingThis contract encompasses environmental compliance and regulatory consulting services focused on ensuring adherence to key sustainability standards and frameworks including the Extended Producer Responsibility (EPP) program, the Cradle to Cradle (C2C) Protocol, the Electronic Product Environmental Assessment Tool (EPEAT), and Massachusetts state regulation 801 CMR 21.00. The work supports green procurement initiatives by providing expert guidance to align procurement practices with environmental performance metrics and regulatory requirements. The project is positioned as a subcontract under the Massachusetts Department of Conservation and Recreation Contracts Unit, with performance required in Boston, specifically at the 02116 zip code. The NAICS code 541620 indicates the work falls under environmental consulting services, and the opportunity was posted on July 27, 2026, with responses due by September 18, 2026. The contract aims to enhance institutional compliance and promote sustainable operations through structured environmental guidance and oversight.

Environmental Consulting Services

POSTED

DEADLINE

in about 2 months

Health & Safety Training DeliveryThe contract titled Health & Safety Training Delivery requires the development and delivery of training programs that fully comply with OSHA standards, focusing on health and safety protocols for workplace environments. The contractor must create comprehensive training materials such as manuals, posters, and related instructional resources to support effective learning and regulatory adherence. The work is to be performed in Boston, Massachusetts, with the place of performance specified by the zip code 02116. This is a subcontract under NAICS code 611430, which categorizes it under other schools and instruction, and it was posted on July 27, 2026, with a response deadline of September 18, 2026. The contracting entity is the DCRCU - DCR CONTRACTS UNIT under the Commonwealth of Massachusetts, though no specific point of contact or set-aside details are provided. All deliverables must meet federal safety compliance mandates and be tailored for practical implementation in real-world work settings.

Professional and Management Development Training

POSTED

DEADLINE

in about 2 months

Environmental Management Systems (EMS) Implementation & AuditingThe contract requires the design, implementation, and auditing of Environmental Management Systems compliant with ISO 14000 standards, with additional support for LEED certification and broader sustainability compliance initiatives. The work involves developing structured environmental programs that ensure regulatory alignment and operational efficiency, conducting thorough audits to verify adherence to established protocols, and providing guidance to achieve recognized green building and environmental performance benchmarks. The scope emphasizes practical, measurable outcomes that enhance environmental stewardship across the organization’s operations. This subcontract is issued by the DCRCU - DCR CONTRACTS UNIT under the State of Massachusetts, with performance required in Boston, specifically at the 02116 zip code. The solicitation was posted on July 27, 2026, with responses due by September 18, 2026, and falls under the NAICS code 541620, which corresponds to Environmental Consulting Services. While no set-aside type is specified, the opportunity is open to qualified subcontractors capable of delivering technical expertise in environmental systems and sustainability frameworks.

Environmental Consulting Services

POSTED

DEADLINE

in about 2 months

DCR 003 Health, Safety and Environmental Compliance Training

Solicitation # BD-27-1020-DCRCU-DC250-131385

Professional and Management Development Training

POSTED

DEADLINE

in about 2 months

DCR 002 Driving Range Net Operations & Maintenance

Solicitation # BD-27-1020-DCRCU-DC250-131381

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month