This Government Contract opportunity from Kentucky was posted on July 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Polypropylene Erosion Control Bag Supply (2’ and 3’ Bags)

Closed

State & Local

Submission Closed07/22/2026, 05:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 326199

New

DIBBS

Nonmetallic Tubing Supply

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-3760

The contract pertains to the procurement of a Plastic Molding Kit with NSN 9330-01-481-4339 and part number FOAM,FRL 6706, under solicitation SPE8E5-26-T-3760, issued by the Defense Logistics Agency Distribution Oklahoma City. The item is classified as a Critical Application Item with a Type II shelf life of six months, extendable, and must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating shelf life code 33. Packaging must avoid plastics as wrapping, cushioning, or dunnage where possible, and palletization must adhere to DLA requirements. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and incorporates technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements. Sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances expected unless otherwise stated. The contract specifies delivery of one kilogram within five days FOB origin, with inspection and acceptance occurring at destination, and prohibits parcel post shipping—requiring traceable freight methods only. The delivery address is Tinker Air Force Base, Oklahoma, with specific marking, packaging, and hazardous material handling instructions under IP025. The purchase request number is 7017719797, and the required delivery date is August 3, 2026.

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-3769

The item is a WINDOW, OBSERVATION with NSN 9330-01-131-6571, requiring a quantity of 750 units to be delivered within 425 days after order award. The solicitation number is SPE8E5-26-T-3769, posted on August 4, 2026, with responses due by August 17, 2026, and the procurement is managed by the Department of Defense through Depot Hill at Hill AFB, Utah. The contract is subject to strict export control regulations under either ITAR or EAR, meaning all technical data associated with this item is restricted and cannot be shared with foreign persons, regardless of location, without prior authorization from the Department of State or Commerce. This restriction extends to foreign national employees and foreign subsidiaries of U.S. companies. Only DLA contractors with approved U.S./Canada Joint Certification Program certification, who have completed mandatory training on handling defense export-controlled data and submitted the DLA export control questionnaire, are permitted access to the technical data. DFARS 252.225-7048 governs compliance, and the primary point of contact for inquiries is Khue Nguyen at khue.nguyen@dla.mil.

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-914X

The contract involves the procurement of 17 units of BUTTON, PLUG with NSN 5340-01-156-8935 under solicitation SPE7L1-26-T-914X, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. The item is subject to stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on either the solicitation issue date or award date depending on the acquisition scale. Packaging must adhere to DLA standards, and non-accepted supplies must have government identification removed. Documentation for source approval is mandatory, and the technical data associated with this item is classified under export control regulations—either ITAR or EAR—restricting disclosure to foreign persons, including those within the United States, without prior authorization. Only contractors approved under the US/Canada Joint Certification Program, who have completed required DLA training and questionnaire, may access this controlled data. Delivery is due within 118 days of award, with performance taking place in San Diego, California. The solicitation closed on August 17, 2026, and primary point of contact is Brandon Pesicek, reachable via email or phone provided.

POSTED

DEADLINE

Supply of Watering System ComponentsThe contract calls for the supply of 192 polysulfone water bottles equipped with silicone rings and 192 grey bottle caps featuring seal gasket assemblies, specifically designed for use in rodent IVC systems. These components are critical for maintaining sterile and leak-proof watering environments in laboratory animal housing, ensuring proper function and animal welfare. The materials specified—polysulfone for durability and chemical resistance and silicone for superior sealing—reflect the technical demands of biologically sensitive settings. The solicitation is classified as a subcontract under NAICS code 326199, which covers other rubber product manufacturing, and is issued by the Department of Veterans Affairs through its Rpo East (36C24E) office. The opportunity was posted on August 4, 2026, with a response deadline of August 11, 2026, at 8:00 PM Eastern Time. No set-aside provisions or geographic performance details are specified, and no point of contact information is provided in the contract data. Interested parties must submit proposals through the SAM.gov portal using the provided UI link before the deadline.

POSTED

DEADLINE

Precision Injection Molding of Light Housing ComponentsThis contract involves the precision injection molding of plastic or composite housing components specifically designed for aviation oxygen mask light assemblies, requiring adherence to strict military specifications. The work demands high tolerances, consistent material integrity, and reliable performance under demanding operational conditions, typical of defense aerospace applications. The manufacturer must demonstrate capability in advanced molding processes, quality control systems, and compliance with the necessary defense standards to ensure safety and functionality in mission-critical environments. The contract is classified as a subcontract under NAICS code 326199, with a response deadline of September 4, 2026, and is sponsored by the Department of Defense through DLA Troop Support. Performance is expected to take place in Philadelphia, and the procurement is open to qualified suppliers capable of meeting the technical and regulatory requirements without a specified set-aside designation. Interested parties must respond by the deadline to be considered for award, with no public point of contact listed and full details accessible through the provided SAM.gov link.

POSTED

DEADLINE

Pull Tab ManufacturingThe contract requires the manufacture of precision polyethylene pull tabs designed for one-step activation of four-tray UGR-E food systems, with all components strictly adhering to MIL-DTL-32235/4 military specifications. These pull tabs are critical components in field rations, ensuring reliable and user-friendly access to meals under operational conditions, and must meet exacting standards for material composition, dimensional accuracy, and functional performance. The work is to be performed at a facility in Philadelphia with a zip code of 19111, and the manufacturing process must conform to the defined technical requirements without exception. This is a subcontract opportunity under the NAICS code 326199, issued by DLA Troop Support on behalf of the Department of Defense. The solicitation was posted on August 4, 2026, with a firm deadline for responses set for September 7, 2026, at 7:00 PM Eastern Time. The contract does not specify a set-aside classification or small business preference, and no point of contact information is provided in the data, though full details are accessible through the designated SAM.gov workspace link. Suppliers must be prepared to demonstrate compliance with military standards and possess the capability to produce high-volume, precision-molded components with consistent quality control.

POSTED

DEADLINE

Roofing Manufacturer and Warranty ProviderThe contract requires the provider to supply a manufacturer-approved 20-year No Dollar Limit warranty for a comprehensive roofing system, ensuring full coverage for all aspects including design validation, material compliance, and installer certification. This warranty must be issued by the roofing manufacturer and must not impose any financial caps on repairs or replacements over the full two-decade term, guaranteeing long-term protection for the roofing installation at the Ottumwa Job Corps facility. The solicitation is classified as a subcontract under the Small Business Administration set-aside program, reserved exclusively for small businesses including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. The NAICS code 326199 identifies the scope as other plastics product manufacturing, indicating the roofing materials involved may be synthetic or polymer-based. Proposals must be submitted by August 20, 2026, and performance is tied to the Ottumwa Job Corps location in Iowa, with eligibility restricted to certified small business entities meeting the specified SBA designations.

POSTED

DEADLINE

Roof Insulation and Cover Board SupplyThe contract requires the supply of tapered polyisocyanurate insulation and high-density cover board for a new roofing system at the Ottumwa Job Corps facility, ensuring full compliance with ASTM standards and manufacturer specifications for thermal performance and code requirements. The materials must be carefully selected to meet rigorous energy efficiency and durability benchmarks necessary for long-term roof system integrity and compliance with building codes. This is a subcontract designated under the SBA’s small business set-aside program, available to Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business concerns. The NAICS code 326199 classifies the work under Other Plastics Product Manufacturing, reflecting the specialized nature of the insulation and board materials. The solicitation was posted on August 4, 2026, with responses due by August 20, 2026, and performance is expected to take place at the Ottumwa Job Corps location in Iowa.

POSTED

DEADLINE

Supply of Sterile Sample Collection VesselsThe Mississippi Department of Health is seeking qualified suppliers to provide sterile, pre-filled plastic vessels and associated transfer devices for the collection and transport of water samples. The contract is structured as a subcontract and is open for bidding until August 24, 2026, with the solicitation posted on August 3, 2026. The equipment must meet strict sterility standards to ensure sample integrity throughout the collection, storage, and transport process. The North American Industry Classification System code 326199 indicates that the products fall under other plastic product manufacturing, emphasizing the specialized nature of the items required. Performance of the work is expected to support state-level environmental and public health monitoring programs, though the specific locations for sample collection and delivery are not detailed. Bidders must ensure their products comply with all relevant regulatory and safety requirements for medical and environmental sampling applications.

POSTED

DEADLINE

Sterile Packaging and Sealing SupplyThe contract involves the supply of sterile barrier packaging materials, including peelable pouches and sealed bags, designed to preserve sterility throughout transport and storage for medical and surgical applications. These materials are critical to ensuring that sterile instruments and supplies remain contamination-free from the point of packaging through to clinical use. The solicitation is issued as a subcontract under the NAICS code 326199 for other plastic products and is managed by the Department of Defense through its Medical Supply Chain MD Surg FSF office. Performance is required at a designated location in San Antonio, Texas, with a submission deadline of August 10, 2026. The packaging solutions must meet stringent regulatory and quality standards to support defense medical operations, and vendors are expected to demonstrate capability in producing consistent, reliable sterile packaging that complies with all relevant federal and industry specifications.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

ESD/EMI Protective Packaging SupplyThe contract calls for the supply of electrostatic discharge and electromagnetic interference protective packaging materials compliant with MIL-PRF-81705 standards, sourced exclusively from manufacturers listed on the QPL-81705. These materials are required to meet strict defense-grade specifications for safeguarding sensitive electronic components from static and electromagnetic threats during handling, storage, and transportation. The procurement is structured as a subcontract under the Department of Defense’s Active Devices Division, with performance centered at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on August 3, 2026, and responses must be submitted by August 11, 2026, with the procurement categorized under NAICS code 326199 for other plastic product manufacturing. Only verified QPL-81705 suppliers are eligible to participate, ensuring all delivered packaging meets mandated military performance and quality benchmarks.

ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days

AI Contract Overview

The contract calls for the supply of trapezoidal polypropylene erosion control bags in two widths, 2 feet and 3 feet, each featuring a minimum 18-inch top opening to facilitate proper installation and filling. These bags are intended for use in slope stabilization and bank erosion control projects across all ten KYTC districts and must meet specific performance standards for durability and soil retention under environmental stresses. The materials are to be fabricated from high-quality polypropylene to ensure long-term resistance to UV degradation, abrasion, and water exposure in Kentucky’s varied climate conditions. Subcontractors are expected to deliver the erosion control bags in accordance with project timelines and location requirements throughout the state, with no specific delivery point designated other than general performance across KYTC Districts 1 through 10. The solicitation is open for responses until July 22, 2026, with bids due by 5:30 p.m. Eastern Time, and the contract is classified under NAICS code 326199 for other plastic product manufacturing. The overseeing agency is the Kentucky Transportation Cabinet Division of Maintenance, and all submissions must be made through the official portal provided in the solicitation link.

General Info

Supply 2-ft and 3-ft polypropylene erosion control bags with 18-inch tops for KYTC districts, meeting durability standards.

Agency

Kentucky → KYTC-Div of MaintenanceView Agency

NAICS

326199 - All Other Plastics Product ManufacturingView NAICS

Place of Performance

Other, KY, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 14

subcontract

Response DeadlineJul 22

Deadline has passed

Submission Closed

07/22/2026, 05:30:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyKentucky → KYTC-Div of Maintenance

ContactsNo contacts available

OfficeN/A

Organization / Agency

Kentucky → KYTC-Div of Maintenance

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of trapezoidal polypropylene erosion control bags (2’ and 3’ widths) with minimum 18” top opening for use in slope stabilization and bank erosion control projects across KYTC Districts 1–10.