This Combined Synopsis/Solicitation opportunity from Consumer Product Safety Commission was posted on July 28, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Pool & Lab- Sump Pump Replacement (Amendment 1-Site Visit Added)

Closed

CPS-2112-25-0046Federal

Submission Closed08/15/2025, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # 27-P-00028

The City of Tampa is soliciting quotes for the procurement of two custom-branded, mobile water bars to be used by the Tampa Water Department for community outreach and public education. These freestanding, portable hydration stations must be constructed from commercial-grade, food-safe, and weather-resistant materials. Key technical requirements include a minimum 18-gallon potable water capacity, multiple dispensing spigots to minimize wait times, an integrated water-chilling system, and heavy-duty casters for transport via utility vehicles. The units must also support high-durability custom graphic wraps for department branding and educational messaging, and include a comprehensive cleaning and maintenance guide. The contract is managed by the Water Production agency, with a delivery requirement of 180 days after receipt of the purchase order to the Tampa Water Department Facility. Bidders must submit quotes electronically via OpenGov by November 3, 2026. Evaluation is based on being the lowest responsive and responsible bidder, with requirements including proof of insurance and a minimum of three years of experience supplying mobile water stations to commercial or municipal customers. Award may be made by division, line item, or aggregate total. Payment is processed approximately 30 days after the receipt and acceptance of materials and itemized invoicing.

POSTED

DEADLINE

208-720092/Transfer Pumps

Solicitation # SRC0000037336

Solicitation SRC0000037336, issued by the N Reg Tuscumbia Area Eqpt M for the State of Alabama, seeks electronic quotes for three Engine Driven Transfer Pumps (Model 300PH-6). These centrifugal pumps must be powered by 6.5 hp Honda GX200 gas engines with a maximum discharge pressure of 30 psi. The quote must include shipping and handling charges for delivery to Tuscumbia, Alabama, with an expected delivery date of December 4, 2026. Responses must be submitted via the Alabama Buys portal by October 28, 2026, and should include specific item or part numbers for verification. The procurement is governed by the Standard Terms and Conditions for Quick Quotes from the State of Alabama, with a maximum contract value of 25,000 dollars and a potential renewal period of up to five years. Award evaluation is based on pricing reasonableness and cost realism, and the state may request manufacturer authorizations, professional licenses, or insurance certificates. Compliance requirements include E-Verify enrollment for employees in Alabama, registration with the Alabama Secretary of State for foreign entities, and certification of state and local tax remittance. Payment must be accepted via electronic methods, including P-cards or EFT, and final acceptance of the goods is contingent upon a satisfactory inspection by the state in accordance with the Universal Commerce Code.

N Reg Tuscumbia Area Eqpt M

POSTED

DEADLINE

Pump Material (LCB)The Bureau of Reclamation, under the Department of the Interior, has issued a forecast for the procurement of pump material intended for the Yuma Area Office well fields within the Lower Colorado Basin. This acquisition is categorized under NAICS code 333914 and will be performed in Yuma. The procurement process is managed by Melissa Trotter, who serves as both the primary point of contact and the Small Business Specialist. The forecast was posted on October 22, 2026, to notify potential vendors of the upcoming requirement for specialized pumping equipment to support regional water infrastructure.

Bureau of Reclamation

POSTED

DEADLINE

Air Ejector Assembly ManufacturingThis subcontract involves the manufacture of two Air Ejector Assemblies for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The fabrication must strictly adhere to part number D-17503-11PC4A and NSN 4320-01-701-1722, following all government design control activity specifications. The contractor is required to maintain compliance with DFARS 252.204-7012 and NAVSEA 5100-003D regulations concerning mercury and ozone-depleting chemicals. Final delivery is subject to Government Design Control Activity approval, with performance taking place in FPO 96616.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Deflector, Dirt and Liquid Manufacturer/SupplierThis subcontract involves the manufacture and supply of dirt and liquid deflector components for prime contractors supporting DLA supply contracts. The supplier is responsible for producing or sourcing parts that strictly adhere to technical specifications for NSN 4320013106928, ensuring all units undergo rigorous quality control for dimensional and material accuracy. The contract is managed by the Department of Defense under the DLA Weapons Support Maritime Supply Chain, with performance based in Tracy, California. All deliverables must comply with specific military standards for packaging and marking, including MIL-STD-2073-1E, MIL-STD-129, and RP001 DLA requirements.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-1294

Solicitation SPE7M1-27-T-1294 is a fixed-price procurement issued by the DLA Weapons Support Maritime Supply Chain for the acquisition of 17 hydraulic motors. The items are designated as critical application items and are identified by NSN 4320011879490, with corresponding part numbers from Eaton Corporation (103-2099-012) and Oshkosh Defense LLC (3626656). The required delivery date is April 25, 2027, with a need ship date of April 20, 2027. Delivery is set as FOB Origin, and both inspection and acceptance will occur at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, which takes precedence over ASTM D3951 packaging standards. All packaging must comply with MIL-STD-129 for marking and labeling, and palletization must follow RP001 requirements. Administrative compliance includes the use of the Wide Area Workflow system for invoicing and payment. Offerors must comply with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. This procurement is not a small business set-aside and falls under NAICS code 333914.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

DEFLECTOR, DIRT AND LIQ

Solicitation # SPE7M1-27-T-1440

Solicitation SPE7M1-27-T-1440 is issued by the DLA Weapons Support Maritime Supply Chain for the procurement of six dirt and liquid deflectors, identified by NSN 4320010996676, for use on AC Motor Model No. A-320-25. The contract specifies a delivery period of 154 days with shipping terms as FOB Origin, destined for DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. The procurement is not a small business set-aside and falls under NAICS code 333914. The contractor must adhere to strict material and quality standards, including the prohibition of Class I ozone-depleting chemicals and intentional mercury use. Technical and quality requirements are governed by the DLA Master List (RA001), while packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American and Balance of Payments Program (DFARS 252.225-7001). All quotes must be submitted through the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-27-T-1301

Solicitation SPE7M1-27-T-1301 is a fixed-price procurement issued by the DLA Weapons Support Maritime Supply Chain for 45 units of spring-loaded shaft seal assemblies, identified by NSN 4320-01-445-6467 and General Electric part number 5086T22P01. This critical application item is designated for delivery to DLA Distribution Jacksonville, Florida, with a required ship date of February 28, 2028, and an original required delivery date of March 5, 2028. The delivery lead time is specified as 482 days, with FOB terms set to origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements (RP001) and ASTM D3951, with all marking and labeling following MIL-STD-129. Technical and quality requirements are governed by the DLA Master List, and the item must be free of asbestos. Compliance requirements include CMMC Level 2 self-assessment, NIST SP 800-171 standards, and various FAR/DFARS clauses regarding the Buy American Act, Berry Amendment, and the prohibition of hexavalent chromium. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. This is not a small business set-aside, though HUBZone price evaluation preferences may apply.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1712

Solicitation SPE7M4-27-T-1712, issued by the DLA Weapons Support Fluid Handling Division, is a request for quotations for the procurement of four units of Rotor, Valve Plate, identified by NSN 4320008671148 and Eaton Aerospace P/N 312797. This is a Foreign Military Sales requirement for Pakistan, with a required delivery date of October 26, 2026, and a delivery window of 20 days after receipt of order. The contract is not a small business set-aside and falls under NAICS code 333914. Shipping is designated as FOB Origin, with the final destination being the No 101 Air Logistics Center in Karachi, Pakistan, via a freight forwarder in Upper Marlboro, Maryland. The procurement mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the point of origin. The contract incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and safeguarding covered defense information. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Item Unique Identification is not required for this specific request.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

EJECTOR ASSEMBLY, AIR

Solicitation # SPE7M1-27-Q-0085

Solicitation SPE7M1-27-Q-0085, issued by the DLA Weapons Support Maritime Supply Chain, is a firm-fixed-price requirement for two air ejector assemblies, NSN 4320-01-701-1722, part number D-17503-11PC4A. This is a restricted source item requiring engineering source approval from the government design control activity and is designated as a critical application item. The supplies are to be delivered to the USS Ronald Reagan CVN 76 within 30 days after receipt of order, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements, including the prohibition of Class I ozone-depleting chemicals and the intentional addition of mercury. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Award will be based on best value, evaluating price, offered delivery, and past performance. Administrative requirements include electronic invoicing via Wide Area Workflow and compliance with cybersecurity standards under DFARS 252.204-7012. This procurement is not a small business set-aside and falls under NAICS code 333914.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

IMPELLER, PUMP, CENTRIFU

Solicitation # SPE7M1-27-T-1408

Solicitation SPE7M1-27-T-1408 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of five centrifugal pump impellers, identified by NSN 4320-01-605-3106 and Ampco Pumps Company LLC part number B18304351. This is not a small business set-aside, and the procurement falls under NAICS code 333914. The required delivery date is February 21, 2027, with a need ship date of April 20, 2027. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements via the DLA Master List (RA001) and specific packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking. Palletization must comply with RP001. Notably, the government will not evaluate or award offers that utilize additive manufacturing processes. Administrative requirements include the use of the Wide Area Workflow (WAWF) system for invoicing and compliance with various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and safeguarding covered defense information. Quotes must be submitted via DIBBS, and offerors must provide their CAGE code and Unique Entity Identifier.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-1314

Solicitation SPE7M1-27-T-1314 is a Request for Quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 11 hydraulic motors, specifically Meggitt Defense Systems, Inc. part number 3306-4 (NSN 4320-01-519-5149). The contract is categorized under NAICS code 333914 and specifies a delivery timeframe of 168 days after award, with a need ship date of April 20, 2027, and an original required delivery date of August 5, 2027. Delivery is FOB Origin, with the destination for inspection and acceptance being DLA Distribution San Joaquin in Tracy, California. The procurement is subject to rigorous technical and quality standards, including the DLA Master List of Technical and Quality Requirements (RA001, RP001, and RQ011), ASTM D3951 for packaging, and MIL-STD-129 for marking and labeling. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals. Administrative requirements include the use of the Wide Area Workflow (WAWF) system for invoicing and payment. The contract incorporates various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on covered defense telecommunications equipment.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days

General Info

Agency

Consumer Product Safety Commission

Contract Value

$10,225.12

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment Manufacturing

Place of Performance

Rockville, MD, 20850, USA

Set-Aside

NONE

Awardee

AANTILIA LLC

Award Issued Date

08/28/2025, 12:00:00 AM UTC

Documents

CPSC Pool & Spa Lab - Sump Pump Replacement SOW

sow

High

CPSC Pool & Spa Lab - Sump Pump Replacement SOW

sow

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseClosed

PostedJul 2

Combined Synopsis

Notice updatedJul 28

Response deadline changed from Aug 1, 2025 to Aug 15, 2025. The notice title changed. The notice description changed.

Response DeadlineAug 15

Deadline has passed

Submission Closed

08/15/2025, 09:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyConsumer Product Safety Commission

Contacts1 person available

OfficeBETHESDA, MD, 20814, USA

Organization / AgencyConsumer Product Safety Commission

Office AddressBETHESDA, MD, 20814, USA

Contacts

Derrick Braswell

contact@example.gov

Full Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This solicitation is issued as a Request for Quotation (RFQ). The solicitation and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-04. The U.S. Consumer Product Safety Commission (CPSC) intends to replace one of the pump and motors in the sump pump systems in the Pool & Spa Lab with an equivalent system. The sump pump and motors replacement must be provided on a Firm-Fixed basis. The provision at 52.212-1, Instructions to Offerors-Commercial Items (Sep 2023), applies to this acquisition. In addition to the requirements of FAR 52.212-1, the quote must prominently display the offeror's Taxpayer Identification number, CAGE code and UEI, as well as contact information for the offeror's point of contact for the quote. A valid SAM.gov registration is required for quote submission and award. Offerors shall include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Items (May 2024), if the annual SAM registration has not been completed. If the SAM registration has been completed, Offerors shall only submit paragraph (b) if there are applicable exceptions to the current registration. The clause at 52.212-4, Contract Terms and Conditions-Commercial Items (Nov 2023), applies to this acquisition. Please see attachment for the Statement of Work (SOW) and remaining clauses. Quotes are due via email to DBraswell@cpsc.gov no later than August 15, 2025 at 5:00pm Eastern Time. Potential offerors may participate in a site visit to 5 Research Place, Rockville, MD 20850 on either August 5, 2025 from 9am-12pm eastern or on August 7, 2025 from 1pm- 4pm eastern. In order to participate in a site visit, the contractor must give the names of all personnel who will participate in the visit by no later than 10am eastern on August 4, 2025. Names must be submitted by email to DBraswell@cpsc.gov. Only personnel who are named will be given access to CPSC facilities. Identification will be required at time of entry. All visitors will be subject to search and security screening.