Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Portable Gas Monitor Calibration and Repair Services

Active

State & Local

Response Deadline09/17/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the California Department of Transportation involves providing on-call calibration and repair services for portable gas monitors and analyzers used by prime contractors on Caltrans projects. The selected provider will operate out of a facility in Los Angeles County to diagnose malfunctions and perform precision calibrations using industry standards and calibration gases. All delivered equipment must include accompanying calibration certificates to ensure compliance. The service provider is required to adhere to the State of California GTC 02/2025 and CCC 04/2017 standards. This opportunity falls under NAICS code 811210 and was posted on September 3, 2026, with a response deadline of September 17, 2026.

General Info

On-call calibration and repair services for Caltrans portable gas monitors in Los Angeles.

Agency

California Department of TransportationView Agency

NAICS

811210 - Electronic and Precision Equipment Repair and MaintenanceView NAICS

Place of Performance

Los Angeles, CA, USA

Set-Aside

NONE

Documents

This scope was carved out of 07A6433.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

*SB/DVBE ONLY* IFPQ 07A6433 Gas Monitoring Equipment Calibration in Los Angeles County

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 3

subcontract

Response DeadlineSep 17

Submission deadline

Response Deadline

09/17/2026, 10:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia Department of Transportation

ContactsNo contacts available

OfficeN/A

Organization / Agency

California Department of Transportation

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs on-call calibration and repair of portable gas monitors and analyzers for prime contractors on Caltrans projects. Diagnoses malfunctions and performs precision calibration using calibration gases and standards at a facility located in Los Angeles County. Adheres to State of California GTC 02/2025 and CCC 04/2017 standards. Delivers calibrated and repaired monitors with accompanying calibration certificates.

Similar Contracts

Same NAICS industry code

16--ACTUATOR,ELECTROMEC, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QSB48

This sole source procurement, issued by the Navsup Weapon Systems Support under solicitation N0038326QSB48, is for the repair or modification of nine electromechanical actuators identified by NSN 7R-1680-016016127-P8. The delivery terms are set as FOB Origin, and the requirement is restricted to a sole source because the government lacks the necessary technical data to compete the contract. The acquisition is subject to the World Trade Organization Government Procurement Agreement and various Free Trade Agreements. Prospective bidders must obtain Government Source Approval prior to the award. Applicants who are not currently approved sources must submit all required documentation as specified in the NAVSUP WSS Source Approval Brochure along with their proposals to be considered. The response deadline for this presolicitation is October 27, 2026, and all inquiries should be directed to Cody P. Cameron.

Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

in about 1 month

99--AMPLIFIER,RADIO FRE, IN REPAIR/MODIFICATION OF

Solicitation # N0038326RSC27

This sole source requirement under solicitation N0038326RSC27 is for the repair or modification of five radio frequency amplifiers, identified by NSN 0R-0098-LLZ98S324-FX and TDP VER 001. The procurement is issued by the Navsup Weapon Systems Support office in Philadelphia, with delivery terms set as FOB Origin. Due to a lack of sufficient or legible technical data available to the government, this is restricted to the current source. The acquisition is subject to the World Trade Organization Government Procurement Agreement and various Free Trade Agreements per FAR 52.225-3 and 52.225-5. A critical requirement for award is Government Source Approval; applicants who are not already approved must submit all necessary documentation as outlined in the NAVSUP WSS Source Approval Brochure. Proposals are due by October 27, 2026, and failure to provide the required source approval data will result in the offer not being considered.

Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

in about 1 month

70--DISPLAY UNIT, IN REPAIR/MODIFICATION OF

Solicitation # N0038326RSB54

This sole source presolicitation, issued by the Department of Defense Navsup Weapon Systems Support, is for the repair or modification of 22 display units under NSN 7R-7025-016018116-QF and TDP VER 002. The delivery terms are set as FOB Origin. Due to a lack of sufficient or legible data available to the government, this requirement is restricted to the current source. The acquisition is subject to the World Trade Organization Government Procurement Agreement and various Free Trade Agreements. Prospective bidders must obtain Government Source Approval prior to the award. Any entity not already approved must submit the required documentation as specified in the NAVSUP WSS Source Approval Brochure along with their proposal, as failure to do so will result in disqualification. The response deadline for this opportunity is October 27, 2026, and inquiries should be directed to Cody P. Cameron.

Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

in about 1 month

70--DISPLAY UNIT, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QSB50

This sole source presolicitation, issued by the Navsup Weapon Systems Support under solicitation N0038326QSB50, is for the repair or modification of four display units identified by NSN 7R-7025-016915295-BL and TDP VER 001. The delivery terms are set as FOB Origin. Due to a lack of available technical data to support alternative vendors, this requirement is restricted to the current source. The acquisition is subject to the World Trade Organization Government Procurement Agreement and various Free Trade Agreements. Prospective bidders must obtain Government Source Approval prior to the award. Those not currently approved must submit all required documentation as specified in the NAVSUP WSS Source Approval Brochure along with their proposal, as failure to do so will result in disqualification. The response deadline is October 27, 2026, and inquiries should be directed to Cody P. Cameron. The agreement becomes bilateral upon the government's acceptance of a proposal via mail, facsimile, or electronic commerce.

Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Town Clock Rehabilitation

Solicitation # BD-26-1657-BOS03-BOS03-133342

The Town of Berlin is seeking written quotations from qualified contractors for the rehabilitation of the First Parish Town Clock located at 24 Central Street in Berlin, Massachusetts. The selected contractor will be responsible for providing all necessary labor, materials, equipment, supervision, transportation, rigging, and incidentals required to complete the project. Interested parties must submit sealed general bids to the Town Administrator at 23 Linden Street, Room 206, Berlin, MA 01503. The deadline for submission is September 30, 2026, by 2:00 p.m. local time. This solicitation is identified by bid number 2026-003 and is managed by the primary point of contact, Michael Tusino.

BOS03 - Town of Berlin

POSTED

about 19 hours ago

DEADLINE

Statewide Standby Generator, ATS & UPS Preventive Maintenance Services

Solicitation # BD-27-1107-FREG5-ACCOU-133129

The Massachusetts Trial Court, through the Office of Court Management, Facilities Management & Capital Planning, is soliciting bids for statewide preventive maintenance, inspection, operational testing, load-bank testing, repair, and emergency services for standby generators, automatic transfer switches, and uninterruptible power supply systems. The contract is structured into five independent regional award groups, with each region being awarded to the lowest responsible and eligible bidder. The initial performance period is 32 months, running from November 1, 2026, to June 30, 2029, with two optional one-year renewals available through June 30, 2031. Bidders must submit their response packages electronically via the COMMBUYS portal by September 30, 2026, including a bid deposit of at least 5 percent of the greatest possible bid amount per region. Award evaluation is based on bid responsiveness, eligibility, and the lowest evaluated regional price, with a requirement that contractors demonstrate the capacity to perform in multiple regions simultaneously if awarded more than one. Contractors must adhere to NFPA 70B, the Massachusetts Comprehensive Fire Safety Code, and the Massachusetts Electrical Code, and are required to provide detailed electronic service reports as a condition of payment. Payments are processed via Electronic Funds Transfer through the Comptroller's system, typically 45 days from invoice receipt.

FREG5 - Facilities Management & Capital Planning - Region V

POSTED

about 22 hours ago

DEADLINE

MY700 and MY300 Technical Repair and Maintenance

W6QK Acc-Apg Adelphi

POSTED

DEADLINE

28V DC and 400 Hz Helo Power Supply Load Testing

Sflc Procurement Branch 1(00080)

POSTED

DEADLINE

Life Saving, Firefighting & Safety Equipment

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Propulsion & Auxiliary Machinery Maintenance

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Omnicell Automated Dispensing System Maintenance

Department Of Veterans Affairs

POSTED

DEADLINE

IPTV Technical Support & Maintenance

W39L USA Ng Readiness Center

POSTED

DEADLINE

More opportunities from California Department of Transportation

Same awarding agency

SB Minor B - Guardrail - Humboldt County

Solicitation # 01A6684

POSTED

about 17 hours ago

DEADLINE

Traffic Control and Pedestrian Safety Services

All Other Support Services

POSTED

DEADLINE

Concrete Sidewalk Demolition and Legal Disposal

Other Nonhazardous Waste Treatment and Disposal

POSTED

DEADLINE

Concrete Sidewalk Installation and Subgrade Preparation

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Sidewalk Replacement Services in Merced and Mariposa Counties.

Solicitation # 10A2938

The California Department of Transportation (Caltrans) issued solicitation IFPQ 10A2938 for sidewalk replacement services in Merced and Mariposa Counties. The project requires a certified Small Business (SB) or Disabled Veteran Business Enterprise (DVBE) to provide all labor, materials, and equipment necessary to remove and legally dispose of existing concrete sidewalks and install new, ADA-compliant replacements. Key technical requirements include achieving 95% subgrade compaction, applying a perpendicular broom finish, and adhering to specific clear width and tactile warning surface standards. The contract is estimated to commence on October 19, 2026, with a maximum bid cap of $484,000.00. Award will be granted to the responsible bidder offering the lowest price quote who meets all specifications. Eligible bidders must hold a valid C-8 or C-12 contractor license and maintain current DGS certification. Mandatory requirements include a site inspection on September 21, 2026, and a final quote submission deadline of October 1, 2026. The contract mandates prevailing wages for bids exceeding $15,000 and requires a payment bond for bids over $25,000. Invoicing is conducted monthly in arrears and requires the submission of certified payroll records for verification by the Caltrans Contract Manager.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Industrial Door Operator and Safety System InstallationThis subcontract for the California Department of Transportation involves the installation and configuration of industrial-duty hoist or motor operators for prime contractors at maintenance station projects in San Bernardino. The scope of work includes integrating safety reversing edges, photo-eyes, and manual chain hoist overrides, followed by rigorous testing of operator functionality and safety triggers to deliver a fully operational automated door system. The project requires strict adherence to California Labor Code Sections 1720-1861, including the submission of certified payroll records. Interested parties must respond by September 19, 2026, for this engagement categorized under NAICS code 238210.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Industrial Door Installation and Removal ServicesThis subcontract for the California Department of Transportation involves the removal and installation of commercial industrial doors at maintenance station projects in San Bernardino. The scope of work includes the legal disposal of old doors and the installation of new doors, tracks, brackets, rollers, and spring assemblies to ensure all systems are weathertight and fully operational. The project requires strict compliance with California Labor Code Sections 1720-1861, including the mandatory submission of certified payroll records. Interested parties must respond by September 19, 2026, under NAICS code 238990.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Heavy-Duty Industrial Door and Component SupplyThis subcontract for the California Department of Transportation involves the manufacture and delivery of heavy-duty industrial door assemblies and components for prime contractors working on maintenance station projects. The scope of work includes providing galvanized steel curtain slats of at least 22-gauge, weather-resistant hoods, and insulated door assemblies specifically engineered to withstand wind loads of 120 MPH. Additionally, the supplier must provide steel pipe and brackets for barrel assemblies along with reinforced steel bottom bars featuring weather seals. The contract requires the delivery of these industrial door assemblies and associated hardware to three separate sites, with the place of performance located in San Bernardino. This opportunity was posted on September 5, 2026, with a response deadline of September 19, 2026, falling under NAICS code 332311.

Prefabricated Metal Building and Component Manufacturing

POSTED

DEADLINE

Waste Collection and Disposal Services (Los Angeles County)This subcontract for Waste Collection and Disposal Services in Los Angeles County involves providing scheduled and on-call trash collection, hauling, and disposal for prime contractors at Caltrans maintenance stations in Cerritos, Humphreys, and Bellflower. The selected provider is responsible for furnishing and managing 10 and 40 cubic yard bins, transporting waste using roll-off trucks, and ensuring all organic waste recycling compliance and legal disposal requirements are met. To be eligible, the contractor must possess a valid California DMV Motor Carrier Permit. This opportunity is issued by the California Department of Transportation with a response deadline of September 22, 2026. The scope of work falls under NAICS code 562111 and focuses on the efficient removal and legal disposal of waste materials within the specified service areas.

Solid Waste Collection

POSTED

DEADLINE

IFPQ Commercial Industrial Door Removal and Replacement Services, San Bernardino County.

Solicitation # 08A4033

The California Department of Transportation has issued solicitation 08A4033 for commercial industrial door removal and replacement services located in San Bernardino County. The selected contractor will be responsible for providing all labor, materials, parts, supplies, equipment, tools, and licenses necessary to remove and legally dispose of existing commercial industrial doors and operators, as well as the installation of new doors, operators, and all required hardware to ensure a secure and weathertight finish. This invitation for price quote, posted on September 5, 2026, has a response deadline of September 19, 2026, with a maximum bid amount of 484,000 dollars. Requirements for the project include specific contractor licensing, DIR registration, and adherence to prevailing wage laws. The procurement process includes small business eligibility requirements and is managed by the primary point of contact, Kae Saechn.

Other Building Equipment Contractors

POSTED

DEADLINE

IFB Trash Services in Los Angeles

Solicitation # 07A6503

The California Department of Transportation is seeking a contractor to provide comprehensive trash collection, hauling, and disposal services in Los Angeles. Under solicitation number 07A6503, the selected contractor will be responsible for providing all necessary labor, equipment, trash bins, and travel, as well as covering all associated disposal fees and taxes for both scheduled and on-call services. The solicitation was posted on September 5, 2026, with a response deadline of September 22, 2026. Interested parties can contact Tim Murphy for further information or submit requests for digitally accessible versions of the solicitation documents through the provided agency contact channels.

Solid Waste Collection

POSTED

DEADLINE

Janitorial Chemical and Consumable SuppliesThis subcontract opportunity with the California Department of Transportation involves the supply of janitorial chemicals and consumable products for prime contractors working on Caltrans facility projects. The scope of work includes the delivery of enzyme cleaners, disinfectant solutions, soap, toilet paper, paper towels, and plastic bag liners. All provided products must be EPA-approved with compliant labeling and accompanied by OSHA-compliant MSDS documentation to ensure safety and regulatory adherence. The contract is categorized under NAICS code 423450 and is centered in Alameda. Interested parties must submit their responses by the deadline of September 24, 2026. The primary objective is to ensure a timely and consistent supply of cleaning materials and necessary safety documentation to support facility operations.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS