Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Portable Lab Equipment Supply

Active

Federal

Response Deadline07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the supply of portable laboratory equipment for water quality analysis, including a portable incubator, pocket pH and TDS tester, thermometer, and glassware, all of which must be fully functional, properly calibrated, and compliant with federal labeling standards. The equipment is intended for use at Camp Lejeune, North Carolina, with delivery and setup required to meet operational needs in field or mobile laboratory settings. All items must adhere to technical specifications ensuring accurate and reliable water quality measurements, and the vendor is expected to provide documentation verifying calibration and conformity to applicable regulations. This is a subcontract opportunity posted on July 20, 2026, with a response deadline of July 27, 2026, under the NAICS code 423450 for Medical and Dental Equipment and Supplies Merchant Wholesalers. The contracting agency is the Department of Defense through the Medical Supply Chain FSH, and the procurement is managed under solicitation number SPE2DH26T5308. There is no specified set-aside status, and the point of contact details are not provided; interested parties must access the official DIBBS portal via the provided URL to submit proposals and obtain additional solicitation details.

General Info

Supply portable water quality lab equipment to Camp Lejeune, compliant, calibrated, by July 27, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

CAMP LEJEUNE, NC, 28542-0128, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of portable incubator, pocket pH and TDS tester, thermometer, and glassware as part of the water quality analysis set; must be calibrated, functional, and compliant with federal labeling standards.

Similar Contracts

Same NAICS industry code

RESUSCITATION KIT, MOUTThe resuscitation kit is a pediatric-specific, latex-free Brosewell Hinkle system designed for emergency use, containing a complete set of essential resuscitation components including two procedural modules in seven pouches, a Broselow tape, two manual resuscitators, four cuff masks, three disposable blood pressure cuffs, one gauge, two Magill forceps, and two laryngoscope handles. It is configured as a comprehensive mouth-to-mask or oronasal resuscitation solution intended for rapid deployment in critical care scenarios. The kit must have a minimum 24-month shelf life, with no more than three months elapsed from the date of manufacture to the date of government delivery, ensuring freshness and operational readiness upon receipt. Each kit is identified by NSN 6515-01-513-9276 and must be labeled with the manufacturer’s name and CAGE code, date of manufacture, expiration or retest date, and contract or lot number. The kit complies with DLA packaging requirements and technical standards referenced under RA001, RP001, and RQ011, ensuring adherence to federal procurement protocols. The contract solicitation number is SPE2DS-26-T-259Y, with a 20-day delivery window following award, and the item is to be delivered to Binghamton, NY, under a federal acquisition by the Department of Defense, Medical Supply Chain, as part of a single-unit purchase under purchase request 7017570635.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 4 hours ago

DEADLINE

END PLUG, VISCOMETERThe item specified is an end plug for a viscometer, designated for use at an oil test center and identified by the NSN 6630-01-498-9904, with a quantity of one unit to be delivered within 20 days of award. This procurement is issued under solicitation SPE2DH-26-T-5393, posted on July 22, 2026, with responses due by July 29, 2026, and falls under NAICS code 423450 for wholesale trade of industrial equipment. The requirement is managed by the Department of Defense through the Medical Supply Chain FSH, with delivery to an FPO address. Technical and quality specifications referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must meet DLA standards, and any non-accepted supplies must have all government identification removed. The primary point of contact is Tina Vu, reachable via email and phone provided in the contract data.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 4 hours ago

DEADLINE

BOTTLE, SCREW CAPThe contract specifies the procurement of a single cylindrical 4 oz (120 ml) bottle with a screw cap, identified by NSN 6640-00-500-0276 and Millipore part number XX65-047-09, with no substitutions allowed. The item is made of clear bluish-pink tinted polyvinylidene chloride (PVC) and is not regulated by the FDA. Packaging must comply with DLA Packaging Requirements for Procurement (RP001), requiring each unit to be sealed in a protective container that prevents damage during handling, and all shipments must use commercially suitable exterior containers for safe delivery via common carrier at the lowest rate to the destination. Marking must conform to Medical Marking Standard No. 1, superseding MIL-STD-129, and packaging must adhere to ASTM D3951 unless the item is hazardous under FED-STD-313, in which case IP025 requirements apply. All DLA Master List of Technical and Quality Requirements take precedence over general commercial standards. The unit of issue is each (EA), with a quantity of one unit, delivered FOB destination within 20 days of contract award. Delivery is to Marine Aviation Logistic Squadron MALS-24 at MCAS Kaneohe Bay, Hawaii, with freight and parcel post addresses provided. The purchase request number is 7017575437, and the solicitation number is SPE2DH-26-T-5396 with a response deadline of July 29, 2026, and an original required delivery date of July 24, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 4 hours ago

DEADLINE

Procurement of commercial biotechnology research suppliesThe contract is for the procurement and installation of office furniture for the NSA Naples N8 new office facility located in Building 442 (Admin I), specifically in rooms 200, 201, 202, 205, and 206. The scope includes supply of desks, ergonomic chairs, bookcases, wardrobes, cabinets, meeting tables, and associated electrical integration with built-in wiring featuring 10 wire options, independent neutral, duplex outlets, and split circuits with isolated grounds. All furniture must be delivered and installed to meet strict aesthetic requirements: Areas 1 and 2 must be styled as an executive professional office in dark walnut, while Areas 3 through 7 must be professional office environments in American walnut. Installation must ensure all components are level, plumb, square, and properly aligned, with all storage units lockable and keyed alike. Contractors must submit detailed Computer-Aided Design (CAD) drawings, 2-D and 3-D design documents, axonometric views, floor plans in PDF format, and a comprehensive Bill of Materials. The contract requires on-site project management, assembly, disassembly of systems furniture, keying of locking components, and touch-up of any nicks or scratches during installation. All materials must be received, inspected, stored, and handled by the contractor prior to and during installation, and any substandard items must be replaced at no cost. Delivery is due within 60 days after receipt of order, with a firm delivery target of September 15, 2026, under FOB Destination terms to Naval Support Activity Naples, FPO AE 09622-0000. Pricing is firm-fixed-price denominated in Euros, exclusive of Italian VAT, and must include all packaging, transportation, and delivery costs to the final destination in Naples, Italy. The solicitation, issued under NAICS code 337214 with solicitation number N6817126QN050, is unrestricted and requires offerors to be registered in the System for Award Management (SAM) with an active Unique Entity Identifier and CAGE code. Proposals must be submitted electronically in two volumes: Volume I detailing technical capability with manufacturer catalogs, design documentation, floor plans, bill of materials, and delivery schedule; and Volume II containing a completed and signed Standard Form 1449 with pricing. Technical capability is evaluated on a pass/fail basis, with only acceptable proposals considered

Navsup Flc Sigonella Naples Office

POSTED

about 9 hours ago

DEADLINE

Supply of Fitness and Conditioning EquipmentNorthside ISD is seeking qualified suppliers to deliver a range of fitness and conditioning equipment for use in school physical education programs, including jump ropes, cones, agility ladders, resistance bands, exercise mats, and other portable training tools. The contract is structured as a subcontract under NAICS code 423450, which pertains to wholesale trade of sports and recreational goods, and the response deadline is August 12, 2026, with the solicitation posted on July 21, 2026. Equipment must meet appropriate educational and safety standards to support daily PE activities across multiple school sites within the district. The place of performance and delivery logistics are to be determined by the vendor in coordination with Northside ISD, and all proposals must be submitted through the BonfireHub portal prior to the deadline. No set-aside provisions are specified, making this opportunity open to all eligible businesses.

POSTED

DEADLINE

Industrial Goggles Supply and Delivery

Defense Logistics Agency

POSTED

DEADLINE

BAG, URINE COLLECTIONThe contract is for a urine collection bag with a 2000 CC capacity, featuring 182.88 cm (72 inch) tubing and a 400 mL urine meter with a white background and graduated markings, including a small burette chamber and a spring-loaded sample port designed for use with a Foley catheter. The package includes a Foley tray and a 10 CC prefilled syringe in 18 French size with a 5 CC capacity, supplied as a disposable unit in packages of ten. The item is identified by NSN 6515-01-406-7748, with a quantity of two packages required, under purchase request 7017553324, and delivery must be completed within 20 days of award. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, superseding MIL-STD-129, ensuring that each unit is sealed and protected against damage and that shipping containers guarantee safe delivery at the lowest cost to the specified point of performance at Scott AFB, 62225-5252. The solicitation is issued under SPE2DS-26-T-255A with a submission deadline of July 27, 2026, and incorporates referenced technical and quality requirements from the DLA Master List, requiring bidders to specify the exact source and part number being offered. Compliance with DLA packaging and marking directives is mandatory for all medical acquisitions under this solicitation.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

BAG, STERILIZATION-BIOHThe contract specifies the procurement of heavy-duty, puncture-resistant sterilization biohazard disposal bags in red or orange color to indicate contamination, intended for autoclaving biologically contaminated materials such as culture dishes prior to disposal. The unit of issue is a package containing 200 bags, and the material must comply with medical marking standard no. 1, superseding MIL-STD-129, with packaging required to be commercial and secure, using sealed unit containers and suitable shipping containers that ensure safe delivery at the lowest carrier rate. The supplies are subject to DLA packaging requirements and technical quality standards referenced in the DLA Master List, with revisions tied to the solicitation or award date depending on acquisition type. The NSN 6530-01-078-0365 is associated with two approved manufacturers, MEDEGEN MEDICAL PRODUCTS, LLC and BAXTER HEALTHCARE CORP, and the delivery is scheduled for five days FOB destination with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must adhere to MIL-STD-2073-1E. The solicitation, issued under SPE2DH-26-T-5368, has a response deadline of July 28, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH with Tina Vu as the primary point of contact.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

LIDOCAINE HYDROCHLOLidocaine Hydrochloride and Epinephrine, USP, is a parenteral injectable pharmaceutical product containing a 2 percent concentration of lidocaine hydrochloride and a 1:50,000 dilution of epinephrine bitartrate, supplied in 1.7 mL single-dose cartridges. The unit of issue is a package of 50 cartridges, each contained within cardboard boxes featuring five blisters of ten cartridges each. The product must be stored at controlled room temperature below 25°C (77°F), protected from light, and must not be frozen. It is regulated by the FDA and requires a prescription. The item has a non-extendable shelf life of 18 months and must be marked in full compliance with Medical Marking Standard No. 1, superseding all prior references to MIL-STD-129. Packaging and shipping must meet commercial standards, with each unit sealed and protected in suitable containers to ensure safe transport via common carrier, and all exterior containers must meet federal logistics requirements. The procurement is issued under contract SPE2DP-26-T-4213 with a solicitation posted on July 21, 2026, and responses due by July 27, 2026. The quantity required is one unit of issue (50 cartridges), with delivery required within five days of award to the destination at Joint Base Elmendorf-Richardson, Alaska. Delivery is FOB destination and subject to zero variance in quantity. Inspection and acceptance occur upon delivery. The item is classified under NSN 6505-01-576-2767, with procurement reference PR 7017548713. All technical and quality requirements referenced in the DLA Master List are incorporated by reference, and the product must be sourced from approved manufacturers including Dentsply Sirona Inc. with NDC 66312-0181-16. Government use requires adherence to all applicable defense logistics standards, including transport protocols and marking instructions, with a designated point of contact and official delivery address provided for coordination.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

COAT, MAN'S PAJAMAThe contract is for a man’s pajama coat, specifically a full-length, broadcloth style made of cotton and polyester with a snap fastener front, in blue overall color, offered as a single unit. It is identified by NSN 6532-00-081-1802 and requested in a quantity of one unit under purchase request 7017546134, with delivery required within five days of award. The solicitation, issued under number SPE2DH-26-T-5360, was posted on July 21, 2026, with a response deadline of July 28, 2026, and falls under NAICS code 423450 for wholesale trade in apparel and accessory merchandising. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to DLA standards, and all non-accepted supplies must have government identification removed prior to return. The offering agency is the Department of Defense, specifically the Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact for inquiries.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

SHEET, LIFT-DRAWThe contract specifies the procurement of a disposable lift-draw sheet measuring 80 inches by 40 inches, designed for safe patient transfer between hospital beds and gurneys or stretchers. Made from highly absorbent synthetic spunlace material, the sheet is not waterproof but is engineered to support up to 1300 pounds, ensuring durability during medical transfers. Each unit of issue consists of a pack of 50 sheets, and bidders must clearly identify the source and part number being offered. The item is identified by NSN 6530-01-503-8750, with a single pack requested under purchase request 7017568893 and a delivery requirement of five days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation or award date depending on acquisition size. The solicitation number is SPE2DH-26-T-5383, issued on July 21, 2026, with responses due by July 28, 2026, and the place of performance is Fort Bragg, NC 28310. The contract is managed by the Medical Supply Chain FSH under the Department of Defense, with Tina Vu listed as the primary point of contact.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

SHOES, SHOWERThe contract is for the procurement of adult shower shoes featuring a cross strap to secure the footwear, a 0.750 inch sole, medium size, black color, and synthetic rubber material with non-slip properties. The item is packaged in units of 72 pairs per package, with a single package ordered under the NSN 6532-01-469-7512. The purchase request number is 7017566649, and delivery must be completed within 20 days after order award. The solicitation is issued under contract number SPE2DH-26-T-5381, released on July 21, 2026, with responses due by July 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling for simplified acquisitions. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have government identification removed. The placing agency is the Medical Supply Chain FSH under the Department of Defense, with performance required at Fort Leonard Wood, Missouri. Primary point of contact is Tina Vu, reachable via email and phone provided.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

WATER SAMPLING TESTThe contract is for a Water Sampling Test Kit designed to measure chlorine levels in water using a pocket photometer, which includes one photometer, four cuvettes, four cuvette caps, and a well cover. Each unit is issued individually and is identified by NSN 6640-01-681-0587 with a quantity of one unit requested under Purchase Request 7017570939. Delivery is required within 20 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. Packaging must meet DLA standards, and non-accepted supplies must have all government identification removed. The solicitation number is SPE2DH-26-T-5387, posted on July 22, 2026, with responses due by July 29, 2026. The procurement is categorized under NAICS code 333248 and falls under the Department of Defense, specifically the Medical Supply Chain FSH. Performance is to be delivered to APO, 09898, with Tina Vu as the primary point of contact via email and phone.

All Other Industrial Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

CASSETTE, FILTERThe contract specifies the procurement of 5 units of a cassette filter with a 5.0 micron rating, white polypropylene, 25mm disk format, identified by NSN 6640-01-492-5120. Each unit consists of 100 disks and must be packaged in sealed commercial unit containers that protect against damage, with shipping containers compliant with commercial standards and capable of secure delivery via common carrier at the lowest cost to the designated delivery point at MCBC Kāneʻohe Bay, Hawaii. All packaging and marking must adhere strictly to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard must be obtained directly from DLA Troop Support. The technical and quality requirements referenced under R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Bidders must clearly identify the source and part number of the item being offered, and all supplies must be free of government identification if not accepted. The contract includes provisions for covered defense information and is issued under solicitation SPE2DH-26-T-5394 with a response deadline of July 29, 2026, and a required delivery schedule of 20 days after award.

Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

VALVE, BALL ANLRThe contract is for a single ball valve, designated as VALVE, BALL ANLR, with NSN 6530-01-546-3565 and part number 700321 REV J, under solicitation SPE2DH-26-T-5397, with a required delivery within 20 days to FPO AP 96666. The item is classified as a Class II medical device under FDA Regulation 880.6880, requiring compliance with 510(k) premarket notification along with registration, listing, labeling, and GMP standards, and the contracting official must submit an EBS referral for confirmation. Packaging and marking must adhere strictly to the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and each unit must be sealed in a protective container within commercial shipping packaging suitable for safe transit via common carrier at the lowest cost. The product is subject to DLA Packaging Requirements and must be palletized accordingly, with no intentional addition of mercury or mercury compounds except in exempted functional components like batteries or instruments, which must also meet shock-proof and secondary containment standards per NAVSEA 5100-003D. Delivery is FOB destination, inspection and acceptance occur at the delivery point, and no quantity variance is permitted. The shipment must not use parcel post and must be transported using the fastest traceable method. All technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on solicitation or award dates, and the contract includes specific government-use identifiers for tracking and distribution.

Alumina Refining and Primary Aluminum Production

POSTED

about 4 hours ago

DEADLINE

BLANKET, HEATINGThe heating blanket is a disposable, ready-heat product measuring 48 by 34 inches, designed to provide a consistent surface temperature of 40 degrees Celsius for approximately six to eight hours after activation by ambient temperature exposure. It is water repellent and offers UV protection, making it suitable for use in varied environmental conditions. The item is issued individually and must meet strict shelf-life requirements, with a mandated 60-month shelf life that is non-extendable; no more than nine months may have passed from the date of manufacture to the date of delivery to the government. Packaging must comply with DLA procurement standards, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The item is identified by NSN 6532-01-619-4158, with a single unit requested under purchase request 7017107132, requiring delivery within five days of award. Bidders must clearly state the source and part number being supplied. The solicitation, issued under SPE2DH-26-T-5392 by the Department of Defense’s Medical Supply Chain FSH, closes on July 29, 2026, with Laura Mitchell as the primary point of contact.

Cut and Sew Apparel Manufacturing (except Contractors)

POSTED

about 4 hours ago

DEADLINE

PUTTY, HAND THERAPYThe contract is for the procurement of one unit of Putty, Hand Therapy, identified by NSN 6530-01-688-6932, a green, medium density, 16-ounce latex-free and non-toxic therapy product designed to aid in the rehabilitation of injuries affecting the fingers, hands, and forearm muscles through targeted muscle strengthening. The product comes in a plastic case with an attached cover and is intended for use in medical therapy settings. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must meet DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Covered defense information provisions are potentially applicable, and bidders must clearly state the source and part number being supplied. The solicitation, issued under SPE2DH-26-T-5391, was posted July 22, 2026, with responses due by July 29, 2026, and requires delivery within five days of award to Fort Bliss, Texas, 79918-0000. The contracting activity originates from the Department of Defense’s Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact.

Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

BRUSH, BRISTLE, DENTAL HThe contract specifies the procurement of a soft, straight-mounted dental handpiece bristle brush, identified by NSN 6520-01-056-7375, with a unit of issue of one package containing twelve brushes. All units must be individually sealed in suitable containers to prevent damage or breakage and packed in commercial exterior shipping containers that ensure safe and cost-effective delivery to the designated point of performance at Camp Pendleton, California, with a delivery deadline of 20 days after order award. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all items must be labeled accordingly. The solicitation incorporates technical and quality requirements listed in the DLA Master List, with applicability determined by the revision in effect on the solicitation or award date depending on acquisition type. Bidders are required to provide the source and part number of the product being offered. The contract falls under NAICS code 339114 and is managed by the Department of Defense’s Medical Supply Chain FSH office, with Tina Vu as the primary point of contact. Covered defense information may apply, and non-accepted supplies must have government identification removed as per applicable standards.

Dental Equipment and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

LITTER, NONRIGID, POLELE

Alumina Refining and Primary Aluminum Production

POSTED

about 4 hours ago

DEADLINE

HOOK SKIN GILLIES

Dental Equipment and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

BOARD, CARDIAC RESUSCIT

Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

Packaging and Palletization ServicesThe contract requires the provision of commercial packaging and palletization services in strict compliance with DLA RP001 and MIL-STD-2073-1E standards to prepare goods for shipment to Joint Base Pearl Harbor, HI, with a zip code of 96853. The work must adhere to federal military packaging regulations ensuring durability, safety, and proper labeling for transit, handling, and storage under demanding conditions. The solicitation is classified as a subcontract with a NAICS code of 423820, indicating it falls under wholesale trade of miscellaneous durable goods, and the contracting activity is under the Department of Defense through the Medical Supply Chain FSH office. Responses are due by July 24, 2026, with the solicitation posted on July 21, 2026, and performance located exclusively at the designated military installation in Hawaii.

Farm and Garden Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE