This Combined Synopsis/Solicitation opportunity from National Aeronautics And Space Administration was posted on July 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Powder Bed Fusion Development and Characterization of Specialty Ni Alloys

Awarded

80NSSC26938195QFederal

Submission Closed07/15/2026, 03:00:00 PM CDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 561990

New

Monthly On-site Shredding Services NH26-004

Solicitation # monthly-site-shredding-services-nh26-004

NH Job Corps is seeking a contractor to provide monthly on-site shredding services for its center located at 943 Dunbarton Rd, Manchester, New Hampshire. The contract period is scheduled to run from December 1, 2026, through May 31, 2027. This solicitation is specifically set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their bids by November 9, 2026, at 5pm EST. For the full statement of work, applicants should contact Ashley Sullivan via email at [email hidden]. The opportunity is categorized under NAICS code 561990.

POSTED

DEADLINE

Equipment Cleaning and SanitationThis subcontract for Equipment Cleaning and Sanitation involves providing specialized cleaning services for heavy machinery used by prime contractors on Massachusetts Department of Fish and Game projects at the Mashpee Pine Barrens WMA. The primary objective is to prevent the introduction of invasive species or pests by pressure washing and scrubbing all equipment entering and exiting the site. All work must be performed using industrial pressure washers and cleaning agents that comply with state environmental protocols for protected wildlife areas. The contractor is responsible for delivering certified clean equipment and maintaining detailed sanitation logs. This opportunity is categorized under NAICS code 561990, with a response deadline of November 30, 2026. Performance of these services will take place in the James Burnham Wesborough area.

Department of Fish and Game

POSTED

DEADLINE

Traffic Control & Safety ServicesThis subcontract for Traffic Control and Safety Services supports prime contractors on Virginia Department of Transportation highway projects, specifically within Highland County. The primary scope of work involves maintaining traffic flow and installing Type I re-directive low-maintenance impact attenuators on highways characterized by speed limits exceeding 50 mph or an average daily traffic volume greater than 25,000 vehicles. All operations must be conducted in strict adherence to Section 512 Maintaining Traffic to ensure the delivery of safe traffic management and properly installed attenuation systems. The opportunity is categorized under NAICS code 561990 and was posted on November 11, 2026. Interested parties must submit their responses by the deadline of December 16, 2026, at 3:00 PM.

Virginia Department of Transportation

POSTED

DEADLINE

Traffic Control and Maintenance of Traffic (MOT)This subcontract for Traffic Control and Maintenance of Traffic (MOT) involves providing traffic maintenance and safety services for prime contractors on Virginia Department of Transportation roadwork projects. The scope of work focuses on delivering safe traffic flow and compliant work zone setups in Bath, Virginia, specifically requiring the implementation of Work Area Protection Manual and Virginia MUTCD standards, as well as the deployment of Portable Changeable Message Signs. The opportunity is categorized under NAICS code 561990 and was posted on November 11, 2026. Interested parties must submit their responses by the deadline of December 16, 2026, at 3:00 PM.

Virginia Department of Transportation

POSTED

DEADLINE

Maintenance of Traffic (MOT)This subcontract for Maintenance of Traffic (MOT) involves providing comprehensive traffic control and maintenance services for prime contractors working on Virginia Department of Transportation road projects. The scope of work focuses on managing traffic impact and lane planning to ensure safety and prevent project disincentives through the strategic use of cones, signage, barriers, and flaggers. All operations must strictly adhere to VDOT Section 512 standards to maintain safe traffic flow and site access throughout the construction process. The opportunity is categorized under NAICS code 561990 and will be performed across various counties within Virginia. Interested parties should note that the response deadline is December 16, 2026, with the solicitation having been posted on November 11, 2026.

Virginia Department of Transportation

POSTED

DEADLINE

Flagger ServicesThis subcontract opportunity with the Virginia Department of Transportation involves providing professional traffic control and safety flagging services for highway construction projects. The selected provider will supply certified flaggers to manage traffic flow and ensure the safety of workers during critical paving and marking operations through the use of flags, safety apparel, and traffic control signage. The project is categorized under NAICS code 561990 and will be performed across various counties. Interested parties must submit their responses by the deadline of December 16, 2026, to ensure safe traffic management for the entire duration of the project.

Virginia Department of Transportation

POSTED

DEADLINE

Traffic Control and Flagger Services

Virginia Department of Transportation

POSTED

DEADLINE

Traffic Management and PCMS SecurityThis subcontract for the Virginia Department of Transportation focuses on providing traffic maintenance and security for Portable Change Message Signs on state highway projects. The selected provider will support prime contractors by managing traffic impacts during construction and ensuring that all signage systems are secured in accordance with specification CN105-SP00150-SEC. The primary objective is to maintain safe traffic flow while implementing rigorous security requirements for the deployment of traffic control devices. The project is located in Sussex and falls under NAICS code 561990. Interested parties must submit their responses by the deadline of December 16, 2026, at 3:00 PM. This engagement is critical for the operational safety and security of highway infrastructure during active construction phases.

Virginia Department of Transportation

POSTED

DEADLINE

Traffic Control and Pedestrian SafetyThis subcontract opportunity for Texas Southern University focuses on providing comprehensive traffic control and pedestrian safety services for perimeter projects. The selected contractor will be responsible for supporting prime contractors by implementing traffic management strategies, which include the strategic placement of signage, cones, and barriers to ensure a safe and managed work zone for both vehicles and pedestrians. Qualified candidates must possess the necessary traffic control certifications to perform these duties. Interested parties should note that the solicitation was posted on November 11, 2026, with a response deadline set for December 15, 2026. The project falls under NAICS code 561990 and is managed through the Texas state procurement system.

Texas Southern University

POSTED

DEADLINE

Traffic Control and Work Zone ManagementThis subcontract for Traffic Control and Work Zone Management involves providing specialized traffic services for prime contractors on Caltrans projects located along Route 99 in San Joaquin. The scope of work includes the deployment and maintenance of construction area signage, the operation of a Traffic Control System, and the utilization of critical safety equipment such as Stationary Impact Attenuator Vehicles, Portable Radar Speed Feedback Sign Systems, and Portable Changeable Message Signs. The primary objective is to deliver a safe and compliant work zone that adheres strictly to all Caltrans Traffic Control standards. This opportunity falls under NAICS code 561990, with a response deadline set for November 24, 2026.

California Department of Transportation

POSTED

DEADLINE

Traffic Management and SignageThis subcontract for Traffic Management and Signage supports prime contractors executing emergency debris projects within Washington County, Texas. The selected provider is responsible for establishing and maintaining secured work zones by installing necessary signage and barricades, managing road closures between 8:00 AM and 3:30 PM, and deploying ground personnel to monitor road obstructions. All services must be performed in strict accordance with OSHA standards and the Texas Manual of Uniform Traffic Control Devices to ensure maximum safety and compliance. Interested parties must submit their responses by the deadline of December 3, 2026.

POSTED

DEADLINE

Traffic and Erosion Control ServicesThis subcontract for Traffic and Erosion Control Services supports prime contractors on storm and paving projects for the City of Waycross in Georgia. The selected provider will be responsible for implementing traffic control plans through the use of signage, cones, and barricades to ensure safe traffic flow, as well as installing erosion control measures such as silt fences to maintain regulatory compliance. Qualified candidates must hold a State of Georgia Contractor License and the necessary Traffic Control certifications. The solicitation was posted on November 10, 2026, with a response deadline of December 10, 2026. This opportunity falls under NAICS code 561990.

City of Waycross

POSTED

about 21 hours ago

DEADLINE

in 29 days

AI Contract Overview

NASA Shared Services Center is seeking a contractor for the development and characterization of specialty nickel alloys using laser powder bed fusion. The project, which will be performed at the NASA Marshall Space Flight Center, focuses on process development for Ni-201 and other specialty nickel-based alloys. The scope of work includes L-PBF parameter development and builds utilizing an EOS M280 system, mechanical testing of the resulting specimens, and the procurement of at least 200 kg of specialized powder. The period of performance is established as six months from the authority to proceed. The government intends to award this as a sole source contract to North American Manufacturing Pros LLC under FAR 12.102(a), as they have been identified as the sole provider capable of meeting these requirements. This procurement is classified under NAICS code 561990 for commercial items or services. While the government has indicated its intent for a sole source award, interested organizations were given until July 15, 2026, to submit capabilities and qualifications for evaluation to determine if the procurement should be conducted on a competitive basis.

General Info

North American Manufacturing Pros LLC will develop specialty nickel alloys for NASA over six months.

Agency

National Aeronautics And Space Administration → NASA Shared Services Center

Contract Value

$100,000

NAICS

561990 - All Other Support Services

Place of Performance

MS, USA

Set-Aside

NONE

Awardee

NORTH AMERICAN MANUFACTURING PROS LLC

Award Issued Date

07/22/2026, 12:00:00 AM UTC

Documents

sow

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedJul 13

Combined Synopsis

AwardedJul 22

Contract was awarded

Submission Closed

07/15/2026, 03:00:00 PM CDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Contacts1 person available

OfficeSTENNIS SPACE CENTER, MS, 39529, USA

Organization / AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Office AddressSTENNIS SPACE CENTER, MS, 39529, USA

Contacts

kacey Hickman

Full Description

NASA/NSSC has a requirement for Powder Bed Fusion Development and Characterization of Specialty Ni Alloys.

NASA/NSSC intends to issue a sole source contract to North American Manufacturing Pros LLC under the authority of FAR 12.102(a). It has been determined that North American Manufacturing Pros LLC 29176 Al HWY 53 Ardmore Alabama 35739 United States is the sole provider of Powder Bed Fusion Development and Characterization of Specialty Ni Alloys

NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Marshall Space Flight Center (MSFC).
The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial

The NAICS Code for this procurement is 561990.

Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 3:00 p.m. Central Standard Time on 7/15/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government.

Oral communications are not acceptable in response to this notice.

NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf .
Primary Point of Contact:
Sign up to see this detail