Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Powder Coating and Protective Finish Application

Active

Federal

Response Deadline08/07/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the application of powder coating in Federal Standard Color 24325 to fabricated cattle guard grilles, with all work must comply with AAMA 2604-05 standards to ensure long-term corrosion and UV resistance. The coating must withstand environmental exposure while maintaining color integrity and protective performance over time. All materials and application processes must meet or exceed the specified technical requirements to guarantee durability under demanding outdoor conditions typical of rural and agricultural settings. This is a small business set-aside subcontract under NAICS code 332813, issued by the Black Hills National Forest under the U.S. Department of Agriculture. The opportunity was posted on July 30, 2026, with a response deadline of August 7, 2026, at 3:00 PM. Work is to be performed at Hill City, South Dakota, with a ZIP code of 57745. The contract is specifically reserved for small business entities, and interested parties must ensure full compliance with all technical, procedural, and regulatory requirements to be eligible for award.

General Info

Powder coat cattle guards in FS 24325 per AAMA 2604-05, small business set-aside in Hill City, SD.

Agency

Department Of Agriculture → Black Hills National ForestView Agency

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and ColoringView NAICS

Place of Performance

Hill City, SD, 57745, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 03:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Agriculture → Black Hills National Forest

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Agriculture → Black Hills National Forest

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Apply powder coating in Federal Standard Color 24325 to fabricated cattle guard grilles, meeting AAMA 2604-05 for corrosion and UV resistance.

Similar Contracts

Same NAICS industry code

Hexavalent Chromium Prohibition ComplianceThe contract requires full compliance with DFARS 252.223-7008 to ensure that all products and manufacturing processes are entirely free of hexavalent chromium, aligning with strict environmental and safety standards. This prohibition extends to all materials, components, and production techniques used by the subcontractor, and must be verified throughout the supply chain to prevent any inadvertent introduction of the substance. The requirement is critical for maintaining regulatory adherence and environmental responsibility within defense-related manufacturing. This subcontract, issued under NAICS code 332813 by the Department of Defense through the CONSTRUCTION & EQUIPMENT T & IFO EQ office, is targeted for performance at Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026. While no set-aside designation is specified, the contract is structured as a subcontract and must meet all technical and compliance obligations under the DFARS regulation, with documentation and certification required to prove adherence to the hexavalent chromium prohibition.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Cadmium Plating Services for Aerospace ComponentsCadmium plating services are required for precision metal components used in aerospace and defense applications, with strict adherence to industry-specific technical and quality standards. The work must comply with all environmental and safety regulations, including comprehensive documentation for handling, disposal, and worker protection related to cadmium use. The contract is a subcontract under the Department of Defense, managed by the Fluid Handling Division, and performance is designated at Robins Air Force Base, Georgia, with the ZIP code 31098-1887. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026. The North American Industry Classification System code 332813 identifies the scope as metal finishing services, and the solicitation is accessible through the DIBBS portal for qualified subcontractors.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Precision Machined Aerospace Component ManufacturingThe contract concerns the manufacture of high-integrity aerospace components, specifically part number 21C7765G01, to exacting military technical drawings and quality specifications. This is a subcontract opportunity under the Department of Defense, managed by the ASC SUPPLIER OPER AE AND AF DIV, requiring precise machining capabilities and adherence to stringent aerospace and defense standards. The work must be performed in compliance with all applicable regulatory and technical requirements to ensure component reliability and mission-critical performance. Interested parties must respond by the deadline of August 6, 2026, with the solicitation posted on July 29, 2026. The North American Industry Classification System code 332813 identifies the scope as Other Fabricated Metal Product Manufacturing, indicating the need for specialized metal fabrication expertise. The place of performance and point of contact details are not specified, but the contract is accessible via the DIBBS portal. The opportunity does not include a set-aside designation, meaning it is open to all qualified subcontractors regardless of size or certification status.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Phosphate Coating / Corrosion-Resistant Surface TreatmentThe contract requires the application of phosphate or other corrosion-resistant coatings to slide assemblies in strict accordance with MIL-DTL-16232 specifications, ensuring durable surface treatments that meet military-grade performance criteria for long-term protection against environmental degradation. All work must also comply with current environmental regulations, emphasizing sustainable and regulatory-compliant processes throughout the coating application and finishing stages. This is a subcontract opportunity posted by the Department of Defense under the LAND SUPPLY CHAIN organization, with a NAICS code of 332813 indicating precision manufacturing for metal finishing and coating services. The solicitation was posted on July 29, 2026, and responses are due by August 7, 2026, with performance expected to occur at an unspecified location under the Department of Defense’s supply chain requirements.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Specialized Coating Application (Chemical Agent Resistant & High-Temp)This contract requires the application of specialized chemical agent resistant and high-temperature coatings to defense components, specifically in accordance with DCSC Drawing 16236 CS-2300-0001, replacing standard paint finishes to meet extreme operational demands. The work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with all coatings applied to exacting standards to ensure durability, resistance to chemical threats, and performance under high-temperature conditions. The subcontract is set aside entirely for small businesses under the SBA’s Total Small Business Set-aside program, classified under NAICS code 332813, which pertains to metal coating, engraving, and related services. The opportunity was posted on July 29, 2026, with a firm response deadline of August 10, 2026, and is managed by the Department of Defense through the Land Supply Chain organization. Only eligible small businesses may respond to this solicitation, and all work must fully comply with the technical specifications outlined in the referenced drawing. The contract does not include detailed point of contact information, and proposals must be submitted through the DIBBS platform via the provided UI link to be considered valid.

LAND SUPPLY CHAIN

POSTED

DEADLINE

TORQUE TUBE, FLAP

Solicitation # SPE4A7-26-Q-0935

The contract specifies the procurement of nine torque tubes for flap systems, identified by NSN 1560-01-019-0364, with a delivery deadline of 300 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with RP001, and government identification must be removed from non-accepted supplies per RQ011. Inspection and acceptance are to be conducted at the manufacturer’s origin under RQ009, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, mandating zero non-conformances unless otherwise stated. Critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The manufacturer may elect attribute or variable inspection under MIL-STD-1916. ISO 9001:2015 quality management system requirements apply under RQ042. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S.-based foreign nationals and subsidiaries. DFARS 252.225-7048 governs access, restricting distribution to contractors with approved JCP certification, completion of required DLA export control training, and formal authorization. Covered defense information is protected under RD002. The solicitation, issued by the Department of Defense under number SPE4A7-26-Q-0935, was posted July 29, 2026, with responses due August 12, 2026, and primary point of contact is Jahaida Hall Hudson.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Hot-Dip Galvanizing of Metal ComponentsThe contract requires the hot-dip galvanizing of structural metal components to achieve a minimum zinc coating thickness of 120 microns, fully compliant with UNI EN ISO 1461 standards to ensure robust corrosion resistance in harsh marine environments. The work must be performed to meet the durability and protective requirements necessary for exposure to saltwater and coastal weather conditions, ensuring long-term structural integrity and reduced maintenance needs. All materials and processes must be rigorously controlled to maintain coating uniformity, adhesion, and surface quality as specified by the international standard. The contract, titled Hot-Dip Galvanizing of Metal Components, is classified as a subcontract under NAICS code 332813 and is solicited by the Naval Supply Systems Command Fleet Logistics Center Sigonella Naples Office under the Department of Defense. The response deadline is August 17, 2026, and all work must be performed in Gaeta. The solicitation was posted on July 29, 2026, and is accessible through the SAM.gov portal. No set-aside provisions are indicated, and the place of performance is fixed, requiring contractors to plan logistics and execution accordingly to meet the stringent technical and temporal requirements.

Navsup Flc Sigonella Naples Office

POSTED

DEADLINE

Chemical Agent Resistant Coating (CARC) ApplicationThe contract requires the application of Chemical Agent Resistant Coating (CARC) in accordance with military drawing specifications, encompassing all necessary surface preparation, phosphate coating under specification RQ036, and thorough inspection to ensure compliance. The work must be performed at the designated place of performance in Cherry Point, North Carolina, with zip code 28533-5040, and follows strict military standards for durability, protection, and uniformity. The subcontract is issued under NAICS code 332813, indicating it pertains to metal coating, engraving, and related services, and is managed by the Department of Defense through the Land Supply Chain organization. Responses must be submitted by August 10, 2026, with the solicitation posted on July 28, 2026, providing potential vendors approximately two weeks to prepare and submit proposals. The contract does not specify a set-aside type, meaning it is open to all eligible contractors without preference for small businesses or other categories. All work must meet exacting military requirements for CARC application, including proper adhesion, corrosion resistance, and chemical agent resistance, and will be subject to rigorous inspection protocols to verify adherence to specifications. The full details and submission requirements can be accessed through the official DIBBS portal using the provided link.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Metallic Tube Manufacturing & DeliveryThe contract calls for the manufacture and delivery of twelve precision metallic tubes designated as critical application items, requiring strict adherence to military technical data packages TDP Rev A Gen 1 and specific engineering drawings such as NR 53711 6690372. These components must meet exacting dimensional, material, and performance standards to ensure operational reliability in defense systems, with all work needing to conform to established military specifications without deviation. The subcontract is issued under NAICS code 332813, indicating classification within the forging and stamping industry, and places performance at New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, leaving a limited window for qualification, proposal submission, and compliance verification. The contract is managed by the Fluid Handling Division of the Department of Defense and is accessible via a designated DIBBS platform link for vendor participation. While no set aside designation or point of contact information is provided, the nature of the items and the involvement of a DoD component signal that only qualified suppliers with verified capabilities in precision metal fabrication and defense supply chain experience are expected to respond. Failure to meet the technical requirements or delivery timelines will likely result in disqualification or contract termination.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Precision Machining and Metal FabricationThe contract calls for precision CNC machining of valve bodies, spools, and internal components from specified high-performance alloys, with full lifecycle support including finishing, deburring, and rigorous dimensional inspection to meet strict aerospace and defense specifications. All work must adhere to exacting quality standards, ensuring tight tolerances and surface finishes suitable for critical fluid control systems within military applications. The scope emphasizes reliability and repeatability, requiring validated processes and documented quality controls throughout production. This is a total small business set-aside under the SBA program, exclusively available to small businesses as defined by the NAICS code 332813, which covers machine shops and precision manufacturing services. The solicitation is issued by the Defense Logistics Agency under the Department of Defense, with performance required at the FPO location bearing zip code 09587. The opportunity was posted on July 28, 2026, and responses are due by August 10, 2026, providing interested small business contractors with a limited window to submit proposals for this high-priority subcontract opportunity.

Defense Logistics Agency

POSTED

DEADLINE

Surface Treatment & Coating (Phosphate Coating)The contract requires the application of a phosphate coating to bolt assemblies in strict adherence to the military specification MIL-DTL-16232H, with the primary objectives of enhancing corrosion resistance and improving adhesion for subsequent coatings or finishes. Process control measures must be rigorously implemented to ensure consistent quality, and full traceability of each coated assembly is mandatory to meet defense-grade standards for accountability and performance verification. The work is classified as a small business set-aside under the SBA, exclusively available to businesses certified as small under the NAICS code 332813, which corresponds to other fabricated metal product manufacturing. The solicitation was posted on July 28, 2026, and responses are due by August 7, 2026, with the procurement managed by the Department of Defense’s Land Supply Chain through a subcontracting arrangement. All work is to be performed in accordance with federal acquisition regulations, though specific performance location details are not provided.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Surface Preparation and Coating ApplicationThis contract requires the cleaning, pretreatment, and application of an e-coat primer followed by a military-compliant topcoat to mounting brackets, ensuring full adherence to defense sector surface finishing standards. The work must be performed in compliance with military specifications for durability, corrosion resistance, and finish quality, with all processes tailored to meet the strict technical and environmental requirements of defense-grade coatings. The contract is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses certified by the Small Business Administration are eligible to bid, promoting small business participation in defense-related procurement. The solicitation, issued by the Strategic Acq Program Directorate within the Department of Defense, was posted on July 28, 2026, with responses due by August 12, 2026. It falls under NAICS code 332813, which categorizes metal coating, engraving, and related activities. The place of performance and specific location details are not specified, indicating flexibility in where the work may be carried out, as long as all contract requirements are met. Bidders must ensure capability to deliver finished brackets meeting military compliance standards within the given timeline, and all work must align with the technical and regulatory expectations of the Department of Defense procurement system.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

More opportunities from Department Of Agriculture → Black Hills National Forest

Same awarding agency

Transportation and F.O.B. Destination DeliveryThe contract requires the delivery of 28 completed cattle guard grilles from the fabrication site to the Hill City Shop in South Dakota, with all transportation responsibilities governed by F.O.B. destination terms, meaning the supplier bears full risk of loss or damage until the goods are delivered and accepted at the destination. The grilles must arrive undamaged, ensuring the integrity of the shipment is maintained throughout transit. This is a Small Business Set Aside subcontract under NAICS code 484220, exclusively reserved for small businesses, and is issued by the Black Hills National Forest under the U.S. Department of Agriculture. The solicitation was posted on July 30, 2026, with a response deadline of August 7, 2026, at 3:00 PM, and the place of performance is firmly designated as Hill City, SD, with a zip code of 57745. Failure to meet the delivery condition or timeline may result in non-compliance and rejection of the submission.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Steel Cattle Guard Grille FabricationThe contract calls for the fabrication of 28 welded steel cattle guard grilles in accordance with USDA Forest Service Drawing 619-05, utilizing high-strength low-alloy steel with precise rail spacing and end channel specifications to meet structural and safety standards. The work is designated as a Small Business Set Aside under the NAICS code 332323, indicating it is reserved exclusively for qualified small businesses. The place of performance is designated as Hill City, South Dakota, with a zip code of 57745, and the contract is issued under the Black Hills National Forest, part of the U.S. Department of Agriculture. The solicitation was posted on July 30, 2026, and responses must be submitted by 3:00 PM on August 7, 2026. This is a subcontract opportunity, meaning the winning vendor will be contracted to produce the cattle guard grilles as part of a larger federal infrastructure or land management effort. The requirement emphasizes adherence to exact engineering drawings and material specifications to ensure compatibility with existing installations and compliance with USDA standards for rural and forested land applications.

Ornamental and Architectural Metal Work Manufacturing

POSTED

DEADLINE

Cattleguard Grilles

Solicitation # 1240LP26Q0139

The Black Hills National Forest, under the U.S. Department of Agriculture, is soliciting bids for cattleguard grilles through a Small Business Set Aside contracting opportunity with solicitation number 1240LP26Q0139, posted on July 30, 2026, and with a response deadline of August 7, 2026, at 3:00 PM Eastern Time. This procurement is classified under NAICS code 332323, indicating it pertains to the manufacturing of metal structural components, and is exclusively reserved for small businesses. The contract requires delivery and performance at Hill City, South Dakota, with the primary point of contact being Sabrina Wilfong, reachable via phone at 8702188428 or email at sabrina.wilfong@usda.gov. All technical specifications and requirements are detailed in the attached solicitation documents, which vendors must review thoroughly before submitting a proposal. The contracting office is located in Custer, South Dakota, with a zip code of 57730.

Ornamental and Architectural Metal Work Manufacturing

POSTED

DEADLINE