Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Powder Coating Services for Architectural Metal Panels

Active

Federal

Response Deadline07/30/2026, 11:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for powder coating services on architectural metal panels specifically for SunShade systems, requiring off-site cleaning and surface preparation followed by durable powder coating to restore the original finish and restore corrosion resistance in accordance with GSA or manufacturer standards. Work must be performed to ensure long-term durability and aesthetic consistency with the original installation, meeting all specified technical and quality criteria for architectural metal finishes. This is a total small business set-aside under SBA regulations, classified under NAICS code 332813 for metal finishing, and is issued by the General Services Administration’s PBS Project Delivery West - Branch E. The solicitation was posted on July 14, 2026, with responses due by July 30, 2026, and the place of performance is identified as zip code 85621. The contract is structured as a subcontract opportunity, and all work must be completed by a small business concern eligible under the set-aside guidelines.

General Info

Powder coating for SunShade panels, small business set-aside, NAICS 332813, performance in zip 85621, GSA contract.

Agency

General Services Administration → Pbs Project Delivery West - Branch EView Agency

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and ColoringView NAICS

Place of Performance

AZ, 85621, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 14

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 11:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGeneral Services Administration → Pbs Project Delivery West - Branch E

ContactsNo contacts available

OfficeN/A

Organization / Agency

General Services Administration → Pbs Project Delivery West - Branch E

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provides off-site cleaning, surface prep, and durable powder coating of removed SunShade panels to restore finish and corrosion resistance per GSA or manufacturer standards.

Similar Contracts

Same NAICS industry code

Precision Machining and Fabrication of Aerospace ComponentsThe contract involves precision machining and fabrication of metal and composite components intended for integration into aircraft air diffusers, with strict requirements for dimensional tolerances and material traceability to ensure compatibility and performance in high-stakes aerospace environments. The work is classified as a subcontract under NAICS code 332813, indicating specialized fabrication services, and is issued by the Defense Logistics Agency under the Department of Defense, reflecting its critical role in defense aerospace supply chains. The performance location and point of contact details are unspecified, but the work must adhere to rigorous quality standards to meet the stringent demands of aircraft systems. The contract was posted on July 20, 2026, and is linked to the DLA’s procurement system with reference identifiers for procurement tracking and award management.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Protective Coating and Surface FinishingThe contract under the title Protective Coating and Surface Finishing involves the application of corrosion-resistant finishes including anodizing, plating, and powder coating to metal components, primarily to meet the durability and performance standards required by the Department of Defense. It is identified as a subcontract under NAICS code 332813, which corresponds to metal coating, engraving, and allied services, and was posted on July 20, 2026, with performance tied to defense logistics needs managed by the Defense Logistics Agency. The contract spans multiple deliveries under the prime contract SPE4AX22D9404 and delivery order SPE4A626F255P, emphasizing precision and compliance with military specifications for surface treatments that enhance component longevity in harsh operational environments. No specific geographic location or point of contact is provided, indicating that the performance location may be distributed or determined by the subcontractor’s capabilities and logistics networks.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Military-Grade Coating and Surface TreatmentThe contract requires the application of a military-grade protective coating in accordance with DCSC Drawing 16236 CS-2300-0001, encompassing all necessary surface preparation steps including thorough cleaning and drying to ensure optimal adhesion and performance. The treatment must provide superior corrosion resistance suitable for demanding operational environments, meeting strict defense standards for durability and longevity. Work is to be performed at the designated location in Tracy, California, with a zip code of 95304-5000, and must comply with all technical specifications outlined in the drawing. This subcontract, posted on July 20, 2026, has a response deadline of July 31, 2026, and falls under NAICS code 332813 for surface treatment services. The contracting activity is managed by the Department of Defense through the Land Supply Chain organization, indicating the work supports critical military infrastructure or equipment. Although no specific set-aside status or point of contact is listed, bidders must ensure full compliance with the coating application requirements and delivery timeline to meet defense-grade quality expectations. The solicitation is accessible via the DIBBS platform for further details and submission.

LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

High-Temperature and Chemical Agent Resistant Coating ApplicationThe contract requires the application of specialized chemical agent and high-temperature resistant coatings to transmission cradles in strict adherence to DCSC Drawing 16236, ensuring all performance and specification requirements are met. The work must comply with environmental regulations that explicitly prohibit the use of Class I ozone-depleting substances, mandating the use of approved, environmentally compliant materials and processes. The coatings must provide durable protection under extreme operational conditions while maintaining structural integrity and functional performance of the components. This subcontract is issued under the North American Industry Classification System code 332813 and is associated with the Department of Defense through its Land Supplier Operations Wheeled Vehicles office. Performance is mandated at the location in Anniston, Alabama, with a zip code of 36201-4199. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026, with all submissions required to meet deadlines and technical compliance without exception. The work is part of a broader effort to maintain readiness and sustainment of military vehicle systems under stringent quality and environmental standards.

LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

DEADLINE

Precision Retaining Plate ManufacturingThe contract requires the manufacture of 76 retaining plates for electrical connectors in strict compliance with SAE AS85049F specifications, encompassing all phases from material sourcing and precision machining to final finishing and full traceability. Each component must meet rigorous defense logistics standards, ensuring material authenticity, dimensional accuracy, and performance reliability under demanding operational conditions. The production process must maintain complete documentation throughout the supply chain to support accountability and quality assurance throughout the lifecycle of the parts. Performance is required at Tracy, California, with a response deadline of July 30, 2026, and the solicitation falls under the NAICS code 332813 for other miscellaneous fabricated metal product manufacturing. This is a subcontract opportunity issued by the Department of Defense’s Active Devices Division, indicating the need for qualified suppliers capable of meeting high-integrity defense-grade requirements. All work must be executed to ensure compatibility with existing military systems and to support long-term sustainment needs within the defense infrastructure.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Surface Treatment and Corrosion Protection CoatingThe contract pertains to the application of advanced wear- and corrosion-resistant finishes, including hard chrome plating and ceramic coatings, on critical actuator components essential for high-performance systems. These surface treatments are required to withstand extreme operational environments, ensuring durability, reliability, and extended service life under harsh conditions such as high friction, moisture, chemical exposure, and mechanical stress. The work must comply with stringent technical specifications to meet the performance standards expected in defense applications. This subcontract opportunity, issued by the Strategic Acquisition Program Directorate under the Department of Defense, is open for bids with a response deadline of August 3, 2026. The North American Industry Classification System code 332813 indicates the scope aligns with metal finishing and coating services. The contract is not subject to a specific set-aside designation, making it available to qualified contractors regardless of size or status. Performance is expected to support DoD infrastructure without a specified geographic location, and all proposals must be submitted through the designated DIBBS platform by the stated deadline to be considered.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Passivation and Surface Treatment ServicesThe contract requires passivation services for Nickel Alloy 718 bolts to eliminate surface contaminants and enhance corrosion resistance, adhering to ASTM A967 or an equivalent military standard. This work is critical for ensuring the long-term durability and performance of components used in demanding environments, particularly within defense applications. The passivation process must be performed with precision to maintain material integrity while meeting stringent quality requirements. This is a HUBZone Set-Aside subcontract posted by the ASC Commodities Division under the Department of Defense, with a NAICS code of 332813 for other metal coating, engraving, and related activities. Performance is to be conducted at Cherry Point, North Carolina, with a response deadline of July 27, 2026. The solicitation is open to qualified small businesses located in HUBZone-designated areas, promoting economic development in historically underutilized zones. All bidders must demonstrate compliance with technical specifications and the ability to deliver services within the designated timeline and location.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Flat Washer Manufacturing and SupplyThe contract pertains to the manufacture and supply of flat washers specified under NSN 5310-01-199-1354 and part number NAS1149D0563K, requiring strict adherence to military quality and packaging standards suitable for critical applications. The items must meet all relevant technical and performance requirements to ensure reliability in defense use, with production and delivery coordinated to fulfill operational needs under the oversight of the ASC Commodities Division within the Department of Defense. Subcontracting is authorized under this solicitation, which was posted on July 19, 2026, with a response deadline of July 27, 2026. The North American Industry Classification System code is 332813, indicating the focus on screw, bolt, and nut manufacturing. The place of performance is designated as Corpus Christi, Texas, with a zip code of 78419-5255, and all deliverables must align with the specified military logistics and documentation protocols. The contract is accessible via the DIBBS platform, and compliance with federal acquisition and defense supply chain regulations is mandatory.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Specialized Coating and Finishing ServicesThe contract requires specialized coating and finishing services for crank handles according to DCSC Drawing 16236 CS-2300-0001, with a focus on applying Chemical Agent Resistant Coating and a high-temperature finish. The work encompasses full surface preparation, priming, and rigorous inspection to ensure compliance with technical specifications, ensuring the finished components meet durability and protection standards under extreme conditions. The application must adhere strictly to the referenced drawing and maintain consistent quality throughout all phases of the process. This is a subcontract under the Department of Defense’s Land Supply Chain, with a place of performance located in Tracy, California, at ZIP code 95304-5000. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026. The North American Industry Classification System code is 332813, indicating the scope falls under other metal coating and related services. Although the solicitation number and point of contact are not provided, interested parties can access further details through the official DIBBS portal link.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Specialized Coatings and Surface TreatmentsThe contract pertains to the application of specialized protective surface treatments, including hard chrome plating and corrosion-resistant finishes, on cylinder rods and internal components to enhance durability, performance, and longevity under demanding operational conditions. These coatings are critical for maintaining structural integrity and functional reliability in high-wear, high-stress environments typically encountered in defense and aerospace applications. The work is being performed under a subcontract tied to the Defense Logistics Agency, which operates under the Department of Defense, ensuring alignment with military specifications and quality standards. The solicitation is classified under NAICS code 332813, which corresponds to metal coating, engraving, and related services, indicating a focus on precision surface engineering rather than general manufacturing. The contract was posted on July 17, 2026, and is accessible through the DIBBS platform with the award ID SPE4A726P2914. Although specific performance locations and point of contact details are not provided, the nature of the requirements suggests that the subcontractor must possess advanced capabilities in industrial coating technologies and meet rigorous military-grade quality controls. There is no set-aside designation indicated, meaning the contract is open to all eligible subcontractors regardless of size or socioeconomic status.

Defense Logistics Agency

POSTED

DEADLINE

Surface Finishing Services (Coating/Plating)The contract targets subcontracting opportunities for specialized metal finishing services including cadmium plating, chromate conversion coating, and anodizing, all required to meet MIL-DTL-5541 or equivalent military specifications. These processes are critical for corrosion resistance, durability, and functional performance of defense-related components and must be performed by qualified vendors with proven compliance to stringent defense quality standards. The work is part of a broader Surface Finishing Services contract issued by the Defense Logistics Agency under the Department of Defense, classified under NAICS code 332813, which pertains to metal plating and finishing services. Although the solicitation number and location details are not provided, the contract is structured as a subcontract opportunity with no set-aside designation, indicating it is open to all eligible vendors regardless of business size or classification. The posting date of July 17, 2026, suggests this is a future opportunity, and participation requires readiness to meet federal defense standards with full traceability and documentation of coating processes.

Defense Logistics Agency

POSTED

DEADLINE

Specialized Coatings and Surface TreatmentsThe contract involves the application of advanced wear-resistant, anti-corrosion, and thermal coatings—including anodizing, plating, HVOF, and PVD—on gearbox components used in aerospace applications to enhance durability and performance under extreme operating conditions. These surface treatments are critical for ensuring long-term reliability and operational readiness of mission-critical aerospace systems, particularly those exposed to high stress, temperature fluctuations, and corrosive environments. The contract is classified as a subcontract under NAICS code 332813 and is managed by the Defense Logistics Agency under the Department of Defense. It was posted on July 17, 2026, with the solicitation identifier SPE4A726P3181. Performance of the work is not limited to a specific geographic location, as no place of performance details are provided. The subcontract nature indicates that the work is part of a larger defense supply chain, likely supporting the production or maintenance of aerospace gearboxes for military platforms, with stringent quality and compliance requirements to meet defense standards.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from General Services Administration → Pbs Project Delivery West - Branch E

Same awarding agency

Turner Roof and Building Envelope ProjectThe U.S. General Services Administration is soliciting construction services for the Turner Roof & Building Envelope Project at the Turner Land Port of Entry in Montana, focusing on roof replacement and building envelope repairs across the main facility and water treatment building, covering both U.S. and Canadian sides. The work encompasses selective demolition, exterior wall and cladding repairs, thermal and moisture protection, metal components, openings, finishes, and coordination with electrical, communications, and security systems, all while keeping the facility fully operational. Contractors must carefully phase construction activities, ensure daily site security, safeguard border operations, and maintain close coordination with GSA, CBP, CBSA, and other stakeholders regarding antennas, cameras, cables, signage, access control, and inspections. Work on the Canadian side may require additional permits and coordination for material imports and cross-border access. The contract requires compliance with all solicitation documents, drawings, specifications, federal and local codes, GSA PBS Core Building Standards, security protocols, environmental regulations, fire and life safety codes, and closeout procedures. Certain roofing materials may be sourced through existing warranties, with the contractor responsible for coordinating with manufacturers and certified installers while providing all remaining labor, equipment, materials, supervision, bonds, permits, and incidental costs. The anticipated performance period is 150 calendar days following notice to proceed, with the base bid covering roof and envelope work on the U.S. and Canadian sides of the main building and the U.S. side of the water treatment building. An in-person site visit is planned, though the date remains undetermined. This is a total small business set-aside under NAICS code 236220, with responses due by August 27, 2026, and the solicitation issued under number 47PD5526R0042.

Commercial and Institutional Building Construction

POSTED

DEADLINE

in about 1 month

Exterior Paint – San Luis II LPOEThe solicitation for Exterior Paint – San Luis II LPOE, identified by number 47PD5526Q0030, is a Total Small Business Set-Aside under FAR 19.5 for NAICS code 238320, exclusively available to small businesses. The scope requires full labor, materials, equipment, and supervision to prepare, prime, and paint miscellaneous exterior railings, walkways, and steel supports at the San Luis II LPOE facility in San Luis, Arizona, 85349. Access to the complete solicitation package, including the Statement of Work and controlled documents, is restricted and requires a GSA Affiliated Customer Account (GACA), which must be created using a Gmail address formatted as GSA.firstname.lastname@gmail.com with mandatory two-factor authentication enabled via smartphone. A mandatory site walk is required prior to submission, scheduled for June 25, 2026, at 9:00 A.M. PDT, with registration due by June 23, 2026, at 9:00 A.M. PDT; at least one representative of the prime contractor must attend. Questions and RFIs must be submitted by July 2, 2026, at 4:00 P.M. PDT through a designated form. Bids must be submitted via an online portal no later than July 23, 2026, at 4:00 P.M. PST, and contractors must acknowledge all amendments—particularly Amendment 0001 containing RFI responses—by signing Block 15A-C and including the signed documentation with their bid package. The award will be made on a trade-off basis, although specific evaluation factors and weights are not disclosed in the available material. The contracting officer, Angela McCord, serves as the primary point of contact for all submissions and inquiries.

Painting and Wall Covering Contractors

POSTED

DEADLINE

Site Safety and Compliance CoordinationThe contract requires comprehensive on-site safety planning and OSHA compliance monitoring during the removal and reinstallation of panels at an active federal facility, ensuring all work adheres to federal safety standards and minimizes disruption to ongoing operations. Coordination with GSA security protocols is mandatory, demanding strict adherence to access controls, hazard mitigation, and procedural alignment with federal facility requirements. The work is designated as a total small business set-aside under SBA guidelines and falls under NAICS code 561990, indicating it is a miscellaneous business support service. Performance must occur at a location with zip code 85621, and the contract is administered by the General Services Administration through its PBS Project Delivery West - Branch E office. Responses are due by July 30, 2026, and the opportunity is structured as a subcontract under a federal procurement framework.

All Other Support Services

POSTED

DEADLINE

Transportation and Logistics for Oversized PanelsThe contract requires secure and insured transportation of oversized SunShade panels from Nogales, AZ to a designated powder coating facility, with specific emphasis on handling fragile, non-standard cargo that demands specialized equipment and operational protocols. Logistics must account for cross-border considerations, including compliance with U.S. customs and border procedures, timely documentation, and coordination to avoid delays that could compromise delivery schedules or panel integrity. All transport must adhere to strict safety standards to prevent damage during transit, and carriers must maintain appropriate insurance coverage for the value of the cargo. This is a total small business set-aside under SBA guidelines, designated under NAICS code 484220 for specialized freight transportation, and is managed by the General Services Administration through its PBS Project Delivery West - Branch E office. The solicitation was posted on July 14, 2026, with responses due by 11:00 PM on July 30, 2026. Performance is localized to the 85621 ZIP code area, though the exact delivery and pickup locations are implied to span the Nogales corridor and the powder coating facility. The nature of the contract favors experienced small businesses capable of navigating complex freight logistics involving oversized, high-value, and delicate loads.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

SunShade Panel Removal and ReinstallationThe contract entails the specialized removal, transportation, handling, and reinstallation of architectural SunShade panels at the Mariposa Land Port of Entry, located in ZIP code 85621. All work must be performed after the panels are sent off-site for refinishing, requiring precise logistics to ensure the integrity of the components throughout the process. The project is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to compete, aligning with FAR 19.5 regulations. The NAICS code 238990 indicates this is classified under other specialty trade contractors, specifically for non-residential architectural finish work not otherwise classified. The solicitation was posted on July 14, 2026, with responses due by 11:00 PM on July 30, 2026. The contracting agency is the General Services Administration, specifically under Pbs Project Delivery West - Branch E, and the place of performance is firmly tied to the Mariposa Land Port of Entry. No point of contact is listed, suggesting all inquiries must be directed through the official SAM.gov portal. The contract type and set-aside status emphasize a focus on supporting small business participation in critical federal infrastructure maintenance projects.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Replace Cooling Tower Billings, MontanaThe General Services Administration’s Public Building Service is seeking proposals to replace the cooling tower at the James F. Battin U.S. Federal Courthouse in Billings, Montana, under solicitation number 47PD5526R0029. This procurement is structured as a Total Small Business Set-Aside under FAR Part 19, reserved exclusively for small businesses certified under NAICS code 238220 with a size standard of $22.5 million. The estimated contract value ranges between $250,000 and $500,000, with a projected performance period of 180 calendar days. The selection process will follow a Lowest Price Technically Acceptable approach, where proposals must meet minimum acceptability thresholds in two non-price evaluation factors—Management and Experience—and the contract will be awarded to the offeror with the lowest evaluated price among those deemed technically acceptable. The solicitation will be issued electronically via SAM.gov on or about July 8, 2026, and all interested parties must register in SAM.gov to be eligible for award. A pre-proposal site visit is scheduled for August 4, 2026, at 10 a.m. Mountain Time at the courthouse location, and attendees are required to present a valid driver’s license for building access. Proposals must be submitted by August 24, 2026, and no paper or fax copies of the solicitation will be provided; potential offerors are responsible for monitoring SAM.gov for amendments and updates. Questions should be directed to John Morelion or Feann Stephens, and all inquiries must include the company name, point of contact, address, phone, email, and the solicitation number.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 1 month

SunShade Panel Powder CoatingThe solicitation for SunShade Panel Powder Coating, identified as 47PD5526Q0034 and amended on July 14, 2026, is a total small business set-aside under NAICS code 238320, restricting eligibility to small businesses as defined by the SBA. The work requires complete removal of existing SunShade panels from the Mariposa Land Port of Entry located at 200 N Mariposa Rd, Nogales, AZ 85621, followed by cleaning and powder coating offsite, and subsequent reinstallation at the same location. Contractors must furnish all labor, materials, equipment, and supervision to perform the work in accordance with the Statement of Work. Access to all solicitation documents is restricted and requires a GSA Affiliated Customer Account (GACA), with a mandatory Gmail address formatted as GSA.firstname.lastname@gmail.com and enforcement of 2-Step Verification and TLS 1.2 encryption for secure access. Proposals must be submitted via a secure Google Drive portal by the deadline of July 30, 2026, with no specified contract value, pricing details, period of performance, or delivery schedule provided in the available information. The contracting office is PBS Project Delivery West - Branch E under the General Services Administration, with Angela McCord listed as the primary point of contact. While the place of performance is clearly defined and inspection and acceptance are expected to occur at the site, no details are provided regarding evaluation factors, payment procedures, invoicing systems, contracting officer representative assignments, or specific technical standards for coating quality, panel installation, or packaging. The solicitation omits explicit contract clauses, special requirements, representations, certifications, or accounting data such as TAS or ACRN lines, indicating that further documentation not included in the provided materials would be necessary to determine full compliance obligations.

Painting and Wall Covering Contractors

POSTED

DEADLINE

LDG Bollard ReplacementThe contract titled LDG Bollard Replacement seeks to replace and modernize the existing retractable vehicle bollard system at the Lloyd D George US Courthouse in Las Vegas, Nevada, with the goal of enhancing security and operational efficiency. The solicitation number is 47PD5526Q0043, posted on July 13, 2026, with proposals due by August 20, 2026. This is a combined solicitation under a Total Small Business Set-Aside, meaning only small business concerns are eligible to compete, as defined by the Small Business Administration under FAR 19.5. The North American Industry Classification System code is 236220, indicating the work falls under commercial and institutional building construction. The contracting activity is managed by the General Services Administration through its Pbs Project Delivery West - Branch E office, with the primary point of contact being Kasey Wilkie at kasey.wilkie@gsa.gov and secondary contact Erica Lal at erica.lal@gsa.gov. The office is based in Washington, D.C., but all work must be performed at the courthouse location in Las Vegas, Nevada, with a zip code of 89101. The solicitation is publicly accessible through the SAM.gov portal, and potential bidders must comply with all federal procurement requirements and deadlines related to small business participation, performance standards, and system integration for the new bollard infrastructure.

Commercial and Institutional Building Construction

POSTED

DEADLINE

in about 1 month

Bullet-Resistant Glazing (BRG) Window Supply and InstallationThe contract calls for the supply, removal, and installation of sixteen bullet-resistant glazing windows at the Carter & Keep Courthouse in San Diego, California, encompassing all associated labor, materials, demolition of existing glazing, and comprehensive site cleanup to ensure a safe and finished work environment. The project is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid, and it falls under NAICS code 238990 for other specialized construction activities. The solicitation was posted on July 9, 2026, with a response deadline of August 12, 2026, and is managed by the General Services Administration through its PBS Project Delivery West - Branch E, with the performance location strictly limited to the courthouse site in San Diego. All work must adhere to strict security and safety standards appropriate for a federal judicial facility, and the successful bidder will be responsible for meeting all technical specifications for bullet-resistant glazing, coordinating with courthouse operations, and ensuring complete compliance with federal construction and procurement guidelines.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Unable to retrieve subcontract opportunitiesAccess to the prime contract was denied due to an authentication failure, preventing the identification of any subcontract opportunities at this time. The solicitation, posted on July 9, 2026, with a response deadline of August 24, 2026, is categorized as a subcontract under a Total Small Business Set-Aside as defined by FAR 19.5, administered by the General Services Administration through its Pbs Project Delivery West - Branch E. The place of performance is located in Billings, with a zip code of 59101, though no additional location details such as state or country code are specified. The NAICS code is not provided, no point of contact is listed, and no organization type is indicated, leaving critical details unavailable for potential bidders attempting to engage with this opportunity. The official link to the opportunity is accessible via the SAM.gov workspace, but authentication barriers currently block access to its content.

POSTED

DEADLINE

in about 1 month

GSA Carter Keep Courthouse West Basement BRG Window ReplacementThe contract requires a contractor to supply all labor, materials, and support for the removal and replacement of sixteen bullet-resistant glazing windows at the L1 area of the Carter & Keep Courthouse located at 333 West Broadway in San Diego, California. The procurement is issued by the General Services Administration’s Pbs Project Delivery West – Branch E under solicitation number 47PD5526Q0035 and is designated as a Total Small Business Set-Aside per FAR 19.5, restricted exclusively to small business concerns. The NAICS code for this effort is 236220, indicating construction of commercial buildings. All work must conform strictly to the statement of work, and access to the complete solicitation and controlled documents requires a GSA Affiliated Customer Account (GACA), which must be a Gmail account starting with "GSA." followed by the individual’s first and last name, with two-factor authentication enabled via smartphone. A mandatory site walk is required for eligibility to submit a proposal, scheduled for July 21, 2026, at 9:00 a.m. PT, with RSVP due by July 20, 2026, at 10:00 a.m. PT, and attendance is capped at four personnel per firm, including at least one prime contractor representative. Proposals must be submitted through a designated Google Forms link by August 12, 2026, at 4:00 p.m. PT, and all inquiries must be submitted via a separate form by July 27, 2026, at 4:00 p.m. PT. Contract administration is managed by Contracting Officer Kasey Wilkie, Contracting Specialist Sarah Hempel, and Project Manager Warren Leske, who serve as the primary points of contact. No contract value, payment details, delivery schedule, or inspection criteria are specified in the available documentation, and all technical requirements, performance standards, and acceptance procedures are contained in the controlled documents accessible only through the GACA portal.

Commercial and Institutional Building Construction

POSTED

DEADLINE

HVAC Equipment SupplyThe contract titled HVAC Equipment Supply is a small business set-aside under the SBA program, specifically designated as a Total Small Business Set-Aside, ensuring that only small businesses are eligible to bid. It seeks the supply of new HVAC equipment including rooftop units, air handlers, condensers, and associated controls and thermostats, with the North American Industry Classification System code 423730 indicating its focus on wholesale trade of HVAC equipment. The opportunity was posted on July 8, 2026, with a response deadline of August 31, 2026, and is administered by the General Services Administration's PBS Project Delivery West - Branch E. Performance of the contract is required to be fulfilled in San Diego, California, with a zip code of 92101, specifying the geographic location for delivery and installation. The contract is structured as a subcontract, implying it supports a larger procurement effort and requires compliance with all applicable federal contracting regulations governing small business set-asides and federal supply chain requirements.

Warm Air Heating and Air-Conditioning Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

in about 1 month