Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Power Distribution Transformers

Active
26045State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Independence Power & Light, the municipally-owned utility of the City of Independence, Missouri, is soliciting bids for the purchase of power distribution transformers under solicitation number 26045. All bids must be submitted online through the PublicPurchase platform by the deadline of August 24, 2026, at 7:00 PM Central Time; paper, fax, or email submissions will not be accepted and will not be returned. A virtual bid opening will be held on the same day via Microsoft Teams, with access provided through a dedicated meeting link and dial-in details, including a phone conference ID and passcode for participants unable to join via the platform. The request is open to qualified suppliers with no specific set-aside category designated, and all inquiries must be submitted through the PublicPurchase portal. The place of performance is in Missouri, and the primary point of contact for the solicitation is Richelieu Sese, reachable by phone at (816) 325-7090 or email at rsese@indepmo.org.

General Info

Independence Power & Light seeks bids for power transformers via PublicPurchase by August 24, 2026, online-only, Missouri delivery.

Agency

Missouri → City of IndependenceView Agency

NAICS

335311 - Power, Distribution, and Specialty Transformer ManufacturingView NAICS

Place of Performance

MO, USA

Set-Aside

NONE

Documents

(5)

Affidavit Acceptance of Missouri Anti-Discrimination Against Israel Act

PDF•affidavit

Instructions for Responding to Bid

PDF•special-notice

Immigration Affidavit - Long Form rev. 2024.05.11

PDF•affidavit

Affidavit of Non-Collusion for ITB Vendor

PDF•affidavit

ITB 26045 - Power Distribution Transformers

PDF•itb

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyMissouri → City of Independence
Contacts1 person available
OfficeN/A
Organization / Agency
Missouri → City of Independence
View Agency Profile
Office AddressN/A
Contacts
Richelieu Sese
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
Independence Power & Light (IPL), a municipally-owned utility of the City of Independence, Missouri, is seeking a price agreement for the purchase of power distribution transformers. Please submit all questions regarding this Invitation to Bid online via www.publicpurchase.com Bids must be submitted online via www.publicpurchase.com. Paper, fax, or email bids will NOT be accepted and will not be returned to sender. There will be a virtual bid opening event for this invitaton to bid. The url for this bid opening is: Microsoft Teams meeting Join: https://teams.microsoft.com/meet/292464761079526?p=NfXISJkYAe1DWAUh02 Meeting ID: 292 464 761 079 526 Passcode: 6Ki9Lr7H or Dial in by phone +1 660-631-8082,,791586884# United States, Marshall Find a local number Phone conference ID: 791 586 884#

Similar Contracts

Same NAICS industry code

NAICS: 335311
New
Federal
Specialized Power Supply Manufacturing & Integration
FA5682 31 Cons (unit 6102)

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335311
New
Federal
CABLE ASSEMBLY, SPEC / NSN: 6150-01-194-1219 / P/N: 10274508
Solicitation # SPRRA226Q0060
The solicitation seeks bids for a cable assembly identified by specification and NSN 6150-01-194-1219 with part number 10274508, under a Small Business Set Aside as a total set-aside, meaning only small businesses are eligible to compete. The NAICS code 335311 indicates the contract falls under the category of wiring device manufacturing. The opportunity was posted on August 7, 2026, and responses must be submitted by 9:00 PM EDT on August 21, 2026. The contracting activity is managed by the Defense Logistics Agency Aviation at Redstone Arsenal, Alabama, with the Department of Defense as the overarching agency. All performance and delivery obligations will be fulfilled at the specified location in Redstone Arsenal. The primary point of contact for inquiries is Delora Crutcher, reachable via email, with Michael Romine available as a secondary contact. Interested vendors can access additional details through the provided SAM.gov link.
Al DLA Aviation At Huntsville

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335311
New
Federal
CABLE ASSEMBLY,ELEC
Solicitation # SPRMM126QHD18
This contract pertains to the manufacture and delivery of the CABLE ASSEMBLY,ELEC under solicitation SPRMM126QHD18, issued by the Department of Defense through DLA Mechanicsburg, with a response deadline of July 27, 2026. The requirement specifies strict adherence to MIL-STD-130 Rev N for item marking and mandates compliance with the referenced Cage Code 53711 and reference number 8215283-002. All items must be procured from authorized distributors of the original equipment manufacturer, and proof of authorization must accompany offers. The contract requires full compliance with quality assurance standards, including contractor-conducted inspections, retention of inspection records for 365 days after final delivery, and the prohibition of substitutions without prior written approval from the NAVICP-MECH Contracting Officer, except for Code 1 part number changes. Packaging must conform to MIL-STD-2073, and delivery is subject to inspection at source as defined by DLA Procurement Note E06. The procurement follows the Lowest Price Technically Acceptable (LPTA) evaluation method and requires electronic submission of invoices and receiving reports through the Wide Area Workflow (WAWF) system. Contractors must register for the Procurement Integrated Enterprise Environment (PIEE) and Electronically Data Access (EDA) to view orders and modifications. The solicitation enforces mandatory use of the Workflow Pro Assist Module and prohibits unauthorized changes to production facilities unless approved, with a required $250 administrative cost reduction for each approved change. Compliance with Buy American and Small Business program representations is required, and all documents provided must include appropriate distribution statements under OPNAVINST 5510.1. The contract also includes provisions for security prohibitions, preference for U.S.-flag vessels, and adherence to all applicable国防相关条款, with notifications and communications to be directed through designated Navy supply channels and points of contact, including the designated POC for this solicitation.
SPRMM1 DLA Mechanicsburg

POSTED

about 18 hours ago

DEADLINE

in 24 days
View Details
NAICS: 335311
New
Federal
31 OSS Uninterpretable Power Supplies
Solicitation # A568226QA040
The U.S. Air Force is seeking a single Firm Fixed Price purchase order for 31 Uninterpretable Power Supplies as specified in Attachment 1 – Salient Characteristics, with no set-aside applicable and the North American Industry Classification System code 335311. All offers must strictly comply with the full solicitation, including any attachments or amendments, and delivery must be made directly to Aviano Air Base, Italy, with the zip code 33081. The solicitation, numbered A568226QA040, was posted on August 7, 2026, and responses are due by August 14, 2026, at 1:00 PM. The contracting office is FA5682 31 Cons (unit 6102), operating under the Department of Defense, with the primary point of contact being Michael Guillermo, reachable at michael_janwel.guillermo.2@us.af.mil or 314-632-5812, and Jason Haro listed as the secondary contact. The contract is being managed from APO AE 09604-6102, and further details are available via the SAM.gov link provided.
FA5682 31 Cons (unit 6102)

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335311
New
Federal
Transformers 1600 Watt
Solicitation # F3N0526042A006
The Department of Defense is soliciting 200 units of 1600-watt transformers for Ramstein Air Base in Ramstein-Miesenbach, Germany, under solicitation number F3N0526042A006. Each transformer must be a step-down unit converting 220/240 volts to 110 volts, featuring dual polarity EU plugs, two U.S. sockets compatible with Type A and B plugs, a 2-meter flexible cable with a Shuko Type F plug, gray steel sheet housing, a portable handle, and single-phase FFP-self-cooling technology. The units must include two primary circuit breakers rated at 4.5 amps functioning as both overload protection and on-off switches, positioned centrally above the sockets. The solicitation, posted on July 16, 2026, requires responses by July 27, 2026, with an anticipated award date of September 30, 2026. Evaluation will be conducted under FAR 52.212-2 using the most advantageous to the government standard, with no set-aside applied due to the overseas location of the requirement. Offerors are encouraged to submit technical sheets or photographs, but no formal attachments, packaging specifications, inspection criteria, or funding details are provided. Funds are not currently available, and no award will be made until appropriated. The contracting office is located in APO, AE, with the administrative office in Kaiserslautern, and the point of contact is Jonathan Rushin. The government retains the right to cancel the solicitation at any time without financial obligation to offerors.
FA5613 700 Cons Pk

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 335311
New
SLED
ITB-2026-006 Penn Turpin Transformer Replacement
Solicitation # IFB-124434
The Town of Bedford Electric Department is soliciting bids for the replacement of a transformer at the Penn Turpin Station Electrical Substation in Bedford, Virginia, under solicitation number IFB-124434. The request seeks either a new transformer or a like-new unit that meets the operational and safety standards required for the substation’s continued service. Bids must be submitted by August 13, 2026, with the solicitation posted on July 21, 2026, and is governed under NAICS code 335311 for electrical equipment manufacturing. The contract is open to all qualified vendors without a specific set-aside, and performance will take place at the designated substation location in Bedford, VA. All proposals must be directed to Crystal McGraw, the point of contact, via email at chosey@bedfordva.gov or by phone at 540-587-6041. Interested parties can access additional details through the provided online portal. The transformer must be suitable for integration into the existing infrastructure at Penn Turpin Station, ensuring compatibility with current systems and compliance with local and industry safety regulations. Vendors are expected to provide thorough technical specifications, warranty information, delivery timelines, and installation capabilities as part of their submissions. Failure to meet all requirements may result in disqualification.
Town of Bedford

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 335311
New
SLED
Pad-Mounted Single- and Three-Phase Distribution Transformers (25–2500 kVA)The contract entails the manufacture and delivery of pad-mounted single- and three-phase distribution transformers ranging from 25 to 2500 kVA, designed with tamper-resistant enclosures to meet ANSI C57.12.28 standards and comply with the Department of Energy’s 2016 efficiency requirements and other applicable ANSI specifications. These transformers are intended for public distribution networks and must be built to ensure long-term reliability, energy efficiency, and physical security against unauthorized access or damage. The equipment is subject to strict regulatory compliance and quality benchmarks to guarantee operational safety and performance under real-world utility conditions. The solicitation is issued as a subcontract by the City of Independence in Missouri and is open for bids with a response deadline of August 24, 2026. The North American Industry Classification System code 335311 identifies the scope as electrical equipment manufacturing, aligning with the production of transformers for distribution systems. While no specific place of performance or point of contact is provided, bidders are expected to fulfill delivery and compliance requirements as outlined in the technical specifications. The posting is accessible via the PublicPurchase platform, indicating a procurement process managed through a municipal procurement portal.
City of Independence

POSTED

1 day ago

DEADLINE

in 17 days
View Details
NAICS: 335311
New
SLED
Pole-Mounted Single-Phase Distribution Transformers (15–167 kVA)The contract solicits the manufacture and delivery of single-phase, pole-mounted distribution transformers with ratings between 15 and 167 kVA, all of which must be filled with mineral oil and comply with ANSI C57.12.00 standards as well as the U.S. Department of Energy’s 2016 efficiency requirements. The transformers are intended for use in urban and suburban electrical distribution networks and must meet strict performance, safety, and energy efficiency benchmarks to ensure long-term reliability and regulatory compliance. All bids must be submitted by the deadline of August 24, 2026, and the opportunity is structured as a subcontract, indicating it is likely part of a larger procurement effort managed by the City of Independence, Missouri, under NAICS code 335311 for electric lighting and electrical equipment manufacturing.
City of Independence

POSTED

1 day ago

DEADLINE

in 17 days
View Details
NAICS: 335311
New
Federal
CBL ACTR/LOCK PWR
Solicitation # N0010426QNE12
This contract pertains to the manufacture and quality assurance of the CBL ACTR/LOCK PWR component, governed by specific engineering drawings and technical standards including MIL-STD-129 for marking, MIL-STD-973 for configuration control, and NAVSEA S9320-AM-PRO-020/MLDG for manufacturing certification. The item is intended for use on submarines or surface ships, mandating strict mercury-free requirements to prevent contamination of sensitive systems, with any proposed use of mercury requiring prior written approval and detailed safety protocols. Suppliers must maintain an ISO 9001 quality system and are responsible for all inspections, records, and compliance, with government oversight reserved at any stage. Configuration changes, deviations, or waivers must be formally approved and documented through specified channels to NAVICP-MECH in Mechanicsburg, PA. The solicitation, issued under N0010426QNE12 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, is subject to emergency acquisition flexibilities and will be awarded as a rated order under the Defense Priorities and Allocations System. It is a total small business set-aside with mandatory compliance with Buy American Act provisions, Small Business Subcontracting Plans, and cybersecurity maturity certification requirements. All contractual documents are deemed officially issued upon electronic transmission, and award requires bilateral acceptance. Vendors must adhere to stringent packaging standards under MIL-STD-2073, provide certified test reports for each assembly, and ensure subcontractors meet all terms. Proposals are due by September 8, 2026, and technical inquiries must be directed to the designated point of contact, James E. Lewis, via official email.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 335311
New
Federal
Power Supply Set
Solicitation # SPRDL1-25-R-0226
DLA Land Warren

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 335311
New
Federal
61--CABLE ASSEMBLY SET,
Solicitation # N0010426QEA80
The contract pertains to the procurement of 60 units of a cable assembly set identified by NSN 1H-6150-015078604-X3 and TDP VER 003, to be delivered to two designated DLA distribution points in New Cumberland, Pennsylvania, and Tracy, California. The Government has determined that the data necessary to procure or repair this part from alternate sources is not owned by the Government and cannot be acquired through purchase, development, or other means, and reverse engineering is deemed uneconomical. As a result, the procurement is being conducted as a sole source action under FAR 6.302-1, with no requirement for competitive bidding. While the notice does not solicit competitive proposals, any responsible source may submit interest, capability statements, or proposals within 45 days of the notice date, or 30 days if under an existing Basic Ordering Agreement. Award is contingent upon the offeror, product, or manufacturer meeting all qualification requirements at the time of award, as outlined in FAR clause 52.209-1, and the Government retains full discretion to determine whether competition is warranted based on incoming responses. Market research indicates that commercial item acquisition policies under FAR Part 12 do not apply to this requirement, though interested parties may still propose commercial alternatives within 15 days of the notice. Further details regarding qualification criteria are available through the contracting office identified in the solicitation.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 335311
New
Federal
61--CABLE ASSEMBLY,POWE
Solicitation # SPE4A626T14GH
The contract seeks the procurement of 23 units of NSN 6150016589373, a power cable assembly, to be delivered to W1A8 DLA DISTRIBUTION with a required delivery window of 68 days after order placement. The approved source for this item is uniquely designated as 1K3W7, with part number 113676-00, and no alternative sources or technical specifications such as drawings or plans are available. This solicitation, issued under the number SPE4A626T14GH, is a Small Business Set Aside, total, meaning only qualified small businesses are eligible to respond, and it falls under NAICS code 335311 for electrical equipment manufacturing. All responsible sources may submit electronic quotes, which must be received by the deadline of August 14, 2026, and hard copies of the solicitation are not provided. The solicitation is accessible only through the online portal linked in the posting, and inquiries must be directed via email to the designated point of contact listed in the solicitation document, with additional guidance available through the DIBBS website. The procuring agency is the DLA Aviation, operating under the Department of Defense, with the office located in Richmond, Virginia.
DLA Aviation

POSTED

2 days ago

DEADLINE

in 6 days
View Details

More opportunities from Missouri → City of Independence

Same awarding agency

New
SLED
Transformer Repair-Remanufacture
Solicitation # 26048

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541380
New
SLED
Transformer Testing, Certification, and Documentation ServicesThe contract seeks independent testing and certification services for transformer manufacturers to ensure full compliance with ANSI C57.12.00 and DOE-2016 efficiency and performance standards. These services are critical for verifying that transformers meet national technical specifications and regulatory requirements before market entry, covering functional validation, safety assessment, and documentation review to support certification. The work involves detailed laboratory evaluations, data reporting, and submission of certified records to affirm adherence to established benchmarks for energy efficiency and operational reliability. Subcontractors must be qualified to perform these services in alignment with federal and industry requirements, with performance expected to support Missouri-based manufacturers and distributors. The solicitation is open for responses until August 24, 2026, and is classified under NAICS code 541380 for other scientific and technical consulting services. While the specific agency office address and point of contact details are not provided, the contract is issued under the City of Independence and accessible via the public procurement portal. All submissions must be completed by the deadline to be considered for award.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 17 days
View Details
NAICS: 541611
New
SLED
Subcontractor Risk Management & Compliance Support
Administrative Management and General Management Consulting Services

POSTED

2 days ago

DEADLINE

in about 2 months
View Details
NAICS: 524126
New
SLED
Professional Liability Insurance Supply
Direct Property and Casualty Insurance Carriers

POSTED

2 days ago

DEADLINE

in about 2 months
View Details
NAICS: 524210
New
SLED
Insurance Brokerage & Risk Procurement Services
Insurance Agencies and Brokerages

POSTED

2 days ago

DEADLINE

in about 2 months
View Details
NAICS: 524210
New
SLED
Insurance Agency/Brokerage Services
Solicitation # 26047
The City of Independence, Missouri, is soliciting proposals for comprehensive insurance agency and brokerage services to manage its insurance program for a one-year term beginning January 1, 2027, with an option to extend for up to four additional one-year periods. Proposals must be submitted electronically through the Public Purchase portal by October 2, 2026, and no paper, fax, or email submissions will be accepted. The solicitation, issued on August 5, 2026, is targeted toward firms capable of delivering insurance marketplace access, administrative support, and ancillary services including loss control, workers' compensation assistance, and benchmarking analytics. Proposers are required to provide a detailed fee structure, clarify their compensation model, and ensure no additional charges such as sales tax or travel expenses are billed unless explicitly included in the proposal. The City will evaluate submissions based on experience, price value, capabilities, references, and overall responsiveness, with a best-value award approach that may include interviews and demonstrations for top-ranked respondents. The contractor must maintain professional liability insurance with limits of $1 million per claim and $1 million general aggregate, commercial general liability coverage with the City listed as an additional insured on a primary and noncontributory basis, automobile liability coverage of $1 million per accident, and workers’ compensation meeting statutory requirements including the “All States” endorsement. The service provider must be authorized to conduct business in Missouri, comply with federal E-Verify requirements, adhere to the Missouri Anti-Discrimination Against Israel Act, and agree to non-discrimination in employment practices. All documents and materials produced under the contract become the City’s property, though the contractor retains unrestricted rights to their use. Invoices must be submitted monthly via the City’s Vendor Self-Service portal, detailing labor hours, billing amounts, and supporting expense documentation, with payment terms of Net 30 days. The contractor is obligated to indemnify the City for damages arising from its negligence or misconduct, must submit signed and notarized affidavits covering conflicts of interest, debarment status, and immigration compliance, and must participate in quarterly Safety Committee meetings. The City retains the right to audit records for three years after final payment, and all communications must be directed through specified procurement channels with additional notices sent to the Procurement Division at 111 E Maple Avenue, Independence, MO.
Insurance Agencies and Brokerages

POSTED

2 days ago

DEADLINE

in about 2 months
View Details
NAICS: 423690
New
SLED
Supply of Reconditioned Equipment with Nameplate DocumentationThe City of Independence is seeking subcontractors to supply reconditioned mechanical or electrical equipment accompanied by complete nameplate documentation that includes detailed records of the reconditioning process. This solicitation requires vendors to provide equipment that has been restored to proper operating condition with full traceability of repairs, replacements, and testing performed, ensuring compliance and reliability. The contract is open for responses until August 28, 2026, and is classified under NAICS code 423690, which pertains to other commercial equipment merchant wholesalers. All equipment must be delivered to the designated place of performance, though specific location details are not provided in the data. There is no set-aside designation outlined for this opportunity, and the procurement is structured as a subcontract under the city’s procurement system. Interested parties must submit responses before the stated deadline, and all documentation must clearly demonstrate adherence to the requirement for full nameplate and reconditioning records. The solicitation is publicly accessible via the provided link on PublicPurchase, and bidders are expected to ensure their proposals meet all technical and compliance standards without additional clarification from the agency.
Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

3 days ago

DEADLINE

in 21 days
View Details
NAICS: 238290
New
SLED
Penetration Sealing – Conduit and PipeThe contract pertains to the sealing of wall penetrations for conduits and pipes to ensure compliance with fire and environmental safety standards, focusing on maintaining the integrity of building barriers against fire spread and environmental hazards. This work is critical for meeting code requirements in constructed facilities and involves specialized materials and techniques to effectively seal openings where pipes and conduits pass through walls, floors, or ceilings. The solicitation is issued as a subcontract under NAICS code 238290, which classifies it under other building equipment contractors, indicating the need for expertise in firestopping and passive fire protection systems. The contract was posted on August 4, 2026, with a deadline for responses set for August 28, 2026, allowing interested parties approximately four weeks to prepare and submit proposals. The awarding entity is the City of Independence in Missouri, though specific project location details and contact information are not provided. The subcontract does not indicate a set-aside designation, meaning it is open to all eligible contractors without preference based on size, ownership, or other classifications. Potential bidders are directed to the online public procurement portal for further details and submission requirements.
Other Building Equipment Contractors

POSTED

3 days ago

DEADLINE

in 21 days
View Details
NAICS: 238990
New
SLED
Safety and Fall Protection Systems InstallationThe contract pertains to the installation of OSHA-compliant guardrails and grating supports designed to enhance personnel safety on elevated platforms and walkways, ensuring adherence to federal safety standards for fall protection. The work is classified under NAICS code 238990 and is structured as a subcontract under the City of Independence in Missouri, with a response deadline of August 28, 2026. The project focuses exclusively on the physical installation and integration of safety systems, requiring qualified contractors to meet strict regulatory requirements for durability, load capacity, and proper anchoring. All materials and methods must align with current OSHA guidelines to safeguard workers in industrial or operational environments. The solicitation is open to eligible subcontractors who can demonstrate experience in industrial safety system installations and compliance with workplace safety codes.
All Other Specialty Trade Contractors

POSTED

3 days ago

DEADLINE

in 21 days
View Details
NAICS: 237110
New
SLED
Pressure Switch and Indicator InstallationThe contract involves the installation of pressure switches and indicators equipped with annular seals to support process monitoring systems, targeting precise and reliable pressure detection in critical operational environments. The work falls under NAICS code 237110, indicating it is related to utility system construction, and is structured as a subcontract under the City of Independence in Missouri. The solicitation was posted on August 4, 2026, with a response deadline of August 28, 2026, requiring interested parties to submit proposals by that date. While specific details regarding the exact locations, quantities, or technical specifications are not provided, the requirement implies compliance with industry standards for process safety and system integrity. The place of performance and point of contact information are unspecified, but the work is expected to occur within the jurisdiction of the City of Independence. Interested contractors should prepare submissions addressing installation protocols, seal compatibility, calibration procedures, and adherence to relevant safety and performance benchmarks for process monitoring systems.
Water and Sewer Line and Related Structures Construction

POSTED

3 days ago

DEADLINE

in 21 days
View Details
Power Distribution Transformers - Missouri | CLEATUS