Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

POWER SUPPLY

Active
SPE7M2-26-T-6446Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, identified as SPE7M2-26-T-6446, is a solicitation for the procurement of three power supply units from Siemens Energy Automation Inc. The items are identified by NSN 6120-01-665-1003 and part numbers 6EP1436-3BA10 and 6EP3436-8SB00-0AY0. Delivery is required within 164 days, with a need ship date of February 16, 2027, and a destination of DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA technical and quality requirements, specifically regarding packaging standards such as ASTM D3951 and MIL-STD-129. There are explicit prohibitions against the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except where functionally required for specific components like batteries or sensors. Inspection and acceptance will take place at the destination, and the contract allows for no quantity variance.

General Info

Procure three Siemens power supply units for DLA Distribution San Joaquin by February 2027.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

335311 - Power, Distribution, and Specialty Transformer ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

(1)

SPE7M2-26-T-6446.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUSA
Contacts
Alisha Blanton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
POWER SUPPLY
POWER SUPPLY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SIEMENS ENERGY AUTOMATION INC. 0ACF4 P/N 6EP1436-3BA10
SIEMENS ENERGY AUTOMATION INC. 0ACF4 P/N 6EP3436-8SB00-0AY0
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017982549 0001 EA 3.000
SPE7M2-26-T-6446
SECTION B
PR: 7017982549 PRLI: 0001 CONT’D
NSN/MATERIAL:6120016651003
DELIVERY (IN DAYS):0164
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:02/16/2027 Original Required Delivery Date:01/23/2027
SPE7M2-26-T-6446 NSN/Part Number: 6120-01-665-1003 Quantity: 3 EA Purchase Request: 7017982549QTY: 3 Delivery: 164 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-21VB
This contract is a solicitation for the procurement of 10 cable assemblies, identified by NSN 6150016804836 and L3 Technologies part number BNG-017-A4. The agreement specifies a delivery timeline of 352 days, with a required delivery date of August 20, 2027, to DLA Distribution San Joaquin in Tracy, California. The terms stipulate a zero percent quantity variance and designate both inspection and acceptance at the destination. Compliance requirements include CMMC Level 2 self-assessment and the protection of covered defense information. Technical and quality standards are governed by the DLA Master List, with specific mandates for physical identification, bare item marking, and packaging according to ASTM D3951 and MIL-STD-129. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, ensuring strict adherence to verification levels for critical, major, and minor attributes.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
POWER SUPPLY
Solicitation # SPRAL1-26-Q-0091
This contract is a solicitation for the procurement of four power supply units, identified by part number 6655514-1 and NSN 6120-01-732-6335, with Raytheon Company designated as the approved source of supply. The agreement is established as a firm fixed price contract with a strict quantity variance of plus or minus zero percent. Delivery is required within 90 days after order, with inspection and acceptance occurring at the destination and shipping terms set as FOB Origin. Quality assurance is governed by strict sampling methods, specifically MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. The contractor must adhere to MIL-STD-130N for identification marking of military property and maintain supply chain traceability documentation per requirement RQ018. Packaging must comply with ASTM-D3951 commercial standards and meet ASTM D4169 performance testing for shipping containers.
ALBANY TRANSPORTATION OFFICER

POSTED

about 19 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335311
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A6-26-T-21KT
This contract is for the procurement of 29 electrical leads, identified as NSN 6150-01-661-1585 and Boeing part number BACJ40AC47-5. As a critical application item, the product requires FAA certification and airworthiness approval. The contractor must adhere to strict quality and technical requirements, including supply chain traceability documentation and FAA bare item marking. Sampling and inspection will be conducted at the destination according to MIL-STD-1916 or ASQ H1331 standards. The delivery is required within 21 days after order, with a need ship date of June 11, 2026. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. All configuration changes and variances must be managed through formal engineering change proposals.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 3 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, POWE
Solicitation # SPE4A6-26-U-3340
This contract is a solicitation for the procurement of 12 power cable assemblies under contract number SPE4A6-26-U-3340 for the Department of Defense. The items are identified by NSN 6150-01-657-1756 and must adhere to specific technical data packages and reference drawings, including those from Teledyne Instruments Inc, Brantner and Associates Inc, and Electric Boat Corporation. Delivery is required within 225 days, with FOB origin and inspection and acceptance occurring at the destination. The agreement mandates strict compliance with DLA technical and quality requirements, including CMMC Level 2 self-assessment and the protection of covered defense information. Quality assurance will be managed via zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Packaging and marking must follow MIL-STD-129 and MIL-STD-2073-1E, with a specific prohibition on the use of mercury or mercury compounds in preservation and packing.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-16KZ
Solicitation SPE4A6-26-T-16KZ is a total small business set-aside issued by the Department of Defense ASC Commodities Division for the procurement of 21 electrical special purpose cable assemblies (NSN 6150017086481). The requirement specifies a delivery schedule of 264 days after receipt of order, with a required delivery date of May 12, 2027. Delivery is FOB Origin, and the destination for shipment, inspection, and acceptance is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to quality and technical standards, including RA001 for technical requirements, RP001 for packaging, and RQ011 for the removal of government identification from non-accepted supplies. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with specific verification levels and AQLs for critical, major, and minor attributes. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129. Administrative requirements include electronic invoicing via Wide Area WorkFlow (WAWF) and compliance with various FAR and DFARS clauses regarding cybersecurity, hazardous materials, and the Buy American Act.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in about 5 hours
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-21SX
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of three cable assemblies under NSN 6150-01-651-1941. The contract requires delivery within 20 days after receipt of order, with performance located at Wheeler Army Airfield. The procurement is governed by NAICS code 335311 and follows specific DLA packaging and quality requirements. Crucially, this contract involves the handling of covered defense information and technical data subject to ITAR or EAR export controls. Contractors must have an approved US/Canada Joint Certification Program certification and complete mandatory training and questionnaires to access this data. All supplies must comply with government identification removal standards and adhere to the technical requirements listed in the DLA Master List.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
BUS, CONDUCTOR
Solicitation # SPE4A6-26-T-21KV
This contract is for the procurement of 41 units of a conductor bus, identified by NSN 6150-01-703-1853 and part number 015577-000. The item is designated as a critical application item requiring FAA airworthiness approval and a Certificate of Airworthiness and Conformance. Delivery is required within 193 days, with a need ship date of March 10, 2027, and the destination is DLA Distribution Warner Robins in Georgia. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging, preservation, and marking standards per MIL-STD-129 and MIL-STD-2073-1E. Contractors must maintain supply chain traceability documentation and follow specified sampling methods such as MIL-STD-1916 or ASQ H1331. The contract specifies a zero percent quantity variance and requires inspection and acceptance at the destination.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 3 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-21YJ
This contract is for the procurement of 25 cable assemblies under solicitation number SPE4A6-26-T-21YJ, identified by NSN 6150-01-721-5890. The items are designated as critical application items and are associated with part numbers from Laurel Technologies Partnership and Mid-Atlantic Computer Services. Delivery is required within 165 days, with a need ship date of February 14, 2027, and a final required delivery date of July 2, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific sampling methods per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001. A significant environmental restriction is in place prohibiting the intentional addition of mercury or mercury-containing compounds to the hardware or packaging, except where functionally required by specific NAVSEA standards. Inspection and acceptance will take place at the destination.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS
Solicitation # SPE4A6-26-T-16JL
Solicitation SPE4A6-26-T-16JL is a request for quotations issued by the Department of Defense, ASC Commodities Division, for the procurement of four wiring harnesses, identified by NSN 6150-01-671-8827. The requirement falls under NAICS code 335311 for electrical equipment manufacturing. Delivery is required within 260 days after receipt of order, with the freight shipping destination specified as the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The need ship date is established as May 8, 2027. The contract mandates strict adherence to technical and quality standards, including the DLA Master List of Technical and Quality Requirements and bare item marking requirement RQ017. Quality assurance will be managed through sampling methods in accordance with MIL-STD-1916 or ASQ H1331, with acceptance and inspection occurring at the destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with various FAR and DFARS clauses, including those governing hazardous materials labeling, export controls, and the use of U.S.-flag vessels for transportation.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in about 5 hours
View Details
NAICS: 335311
New
DIBBS
RETAINER, BATTERY
Solicitation # SPE7L7-26-T-4916
This contract is for the procurement of two battery retainers, identified by NSN 6160017220967 and Volvo Group North America part number 23491304. The agreement is managed by the Defense Logistics Agency under solicitation number SPE7L7-26-T-4916, with a required delivery date of August 14, 2026, and a delivery window of five days. Shipping is set as FOB Origin, with inspection and acceptance occurring at the destination in Fort Carson, Colorado. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards such as MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be conducted using zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All shipments must be sent via the fastest traceable means, specifically excluding the use of parcel post.
Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335311
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4934
This solicitation, issued by the DLA Dist San Joaquin for the Department of Defense, is for the procurement of one power supply unit under NSN/Part Number 6130-00-934-1627. The contract requires delivery within 158 days after the order is placed and is categorized under NAICS code 335311. Performance is located in Tracy, California, and the primary point of contact is Maria Blaney. The agreement incorporates several strict technical and quality mandates, including DLA packaging requirements and CMMC Level 2 cybersecurity self-assessment standards. It mandates adherence to covered defense information protocols and configuration change management for engineering proposals. While MIL-I-45208A is an acceptable higher level quality program, alternate offerors must provide a complete data package for both approved and alternate parts.
DLA DIST SAN JOAQUIN

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-U-3341
This contract is a solicitation for the procurement of 15 special purpose electrical cable assemblies, identified by NSN 6150-01-657-8262. The delivery requirement is set for 184 days after receipt of order. The project falls under NAICS code 335311 and is managed by the Department of Defense through the ASC Commodities Division. Compliance requirements are stringent, including CMMC Level 2 certification for third-party assessment and adherence to DLA packaging and marking standards. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Additionally, the contract contains strict export controls under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific Department of Defense training to access technical data.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAG
Solicitation # SPE7M2-26-T-6451
This contract is for the procurement of self-locking hexagon nuts, identified by NSN 5310-00-483-8790 and part number MS17829-6C. The total quantity requested is 28,621 units, divided across three delivery locations: DLA Distribution Depot Hill, DLA Distribution Cherry Point, and DLA Distribution New Cumberland. The items are classified as commercial and must be manufactured according to the current revision of the applicable part standards, including NASM17829 and NASM25027. Key requirements include strict adherence to MIL-STD-130N for identification marking and MIL-STD-129 for packaging. The contract mandates a total prohibition of mercury or mercury-containing compounds in the hardware, preservation, and packaging. Quality assurance is emphasized through the requirement of a Certificate of Quality Compliance and critical item source inspection. Delivery is specified as FOB Origin with a delivery window of 452 days, and the solicitation is designated as a HUBZone set-aside.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Solicitation # SPE7M2-26-T-6432
This contract is for the procurement of 7,143 lock washers, identified by NSN 5310-01-053-0832 and part number MS51848-45. The items are classified as critical application items and must adhere to basic specification MS51848E. The agreement specifies a delivery timeline of 161 days, with a required delivery date of June 19, 2027, and a need ship date of February 9, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Jacksonville. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. A significant environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or its packaging, with limited exceptions for specific functional components. The procurement is conducted under full and open competition for the Nuclear Reactor Program within the Department of Defense.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICA
Solicitation # SPE7M2-26-T-6433
This contract is for the procurement of 10 electrical backshell cable clamp adapters, identified as commercial off-the-shelf items with NSN 5935014533009 and Glenair part number 380HA013NF2112A. The items are designated as critical application items and must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The required delivery date is April 13, 2027, with a delivery timeframe of 164 days after order. The agreement mandates strict adherence to DLA packaging, marking, and shipping requirements, specifically citing MIL-STD-129, MIL-STD-2073-1E, and MIL-DTL-55330 for connectors. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. Inspection and acceptance will take place at the destination, and the contract follows a zero percent quantity variance policy.
Electronic Connector Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335931
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M2-26-T-6183
Solicitation SPE7M2-26-T-6183, issued by the Department of Defense Nuclear Reactor Program via DLA Land and Maritime, seeks the procurement of 7,597 electrical contacts (NSN 5999010820297). This item is identified as a commercial product and a critical application item, requiring adherence to the Qualified Products List or Qualified Manufacturers List. The delivery requirement is 220 days after the order date, with a need ship date of March 29, 2027, and a final required delivery date of July 17, 2027. The destination for delivery, inspection, and acceptance is the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Technical compliance is governed by SAE AS39029, with specific requirements for part numbering and labeling on unit packs. Packaging must adhere to MIL-STD-2073-1E and marking must comply with MIL-STD-129. The contract mandates strict prohibitions against the intentional addition of mercury, except for specific functional components. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, hazardous material identification, and basic safeguarding of contractor information systems. Quotations must be submitted electronically via the DLA Internet Bid Board System.
Current-Carrying Wiring Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 5 hours
View Details
NAICS: 332996
New
DIBBS
UNION, PIPE
Solicitation # SPE7M2-26-T-6453
This contract is a solicitation for the procurement of 55 units of pipe unions, identified by NSN 4730012740397 and part number 5301-150 from Flagg Stanley G & Co Inc. The requirement is designated as a critical application item and is managed by the Department of Defense Nuclear Reactor Program. Delivery is required within 105 days, with a requested ship date of July 28, 2026, and a final delivery date of September 26, 2026, to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It specifically prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. Because the manufacturing of these items may require specialized casting or forging tooling that the government does not possess, suppliers are directed to the DLA Casting and Forging Assistance Request process for necessary sourcing and technical information.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE7M2-26-T-6455
This contract is for the procurement of 1,594 hexagon head cap screws, identified by NSN 5305-00-087-3080 and part number SCB645759-312. The items must adhere to technical specifications outlined in basic drawing 80063 SC-B-645759 and reference standard NASM35308. This is designated as a critical application item, requiring strict adherence to sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. The delivery is set for 120 days after order, with a required delivery date of May 13, 2027, shipped FOB Origin to DLA Distribution Anniston in Alabama. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, specifically prohibiting the use of mercury or mercury compounds. Inspection and acceptance will take place at the destination.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M2-26-T-6163
Solicitation SPE7M2-26-T-6163, issued by the Defense Logistics Agency Land and Maritime Nuclear Reactor Program, is for the procurement of 30 nonmetallic hose assemblies, part number 88043-224 from Hydraulics International, Inc. The items are 360 inches in length and are designated as critical application items. Delivery is required within one day after the date of award, with a need ship date of August 22, 2026, and an original required delivery date of January 26, 2027. The shipping terms are FOB Destination, with the delivery location specified as the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will both occur at the destination. The contract mandates strict adherence to military standards for packaging and marking. Hoses must be secured on reels, rolls, or spools and enclosed in double-walled, weather-resistant fiberboard containers per ASTM-D5118. Product openings must be sealed with plastic plugs or end caps to prevent contamination. Marking must comply with MIL-STD-129, including specific arrow-up and open-this-side labels. Because the items are classified as protected cargo, item descriptions must be omitted from shipping containers per Special Marking Code 40. Additionally, the contractor must notify the DLA Land and Maritime Contract Administrator if the product has a shelf life. Administrative and security requirements include mandatory electronic submission of payment requests via Wide Area Workflow. The contractor must comply with significant cybersecurity standards, including CMMC Level 2 self-assessment and NIST SP 800-171 DoD assessment requirements. The solicitation incorporates various FAR and DFARS clauses regarding the prohibition of certain telecommunications equipment, hazardous material identification, and the protection of covered defense information. All quotations must be submitted electronically via the DLA Internet Bid Board System by August 25, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 5 hours
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE7M2-26-T-6449
This contract, identified as SPE7M2-26-T-6449, is a solicitation from the Department of Defense Nuclear Reactor Program for the procurement of 23 plain hexagon nuts under NSN 5310012930849. The items are designated as critical application items and must adhere to specific technical and quality requirements, including MIL-STD-130N for identification marking and MIL-STD-129 for general marking. Delivery is required within 105 days, with a need ship date of May 19, 2026, and an original required delivery date of October 16, 2026. The agreement specifies that the delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. Strict environmental regulations are in place prohibiting the intentional addition of mercury or mercury-containing compounds to the hardware or its packaging. Packaging and palletization must comply with MIL-STD-2073-1E and DLA packaging requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, WIRE WO
Solicitation # SPE7M2-26-T-6452
This contract is for the procurement of 36 units of fixed, wire wound, inductive resistors under solicitation SPE7M2-26-T-6452. The items are designated as critical application items and must adhere to specific technical data packages, including basic drawing 16236 LO-012188664 and reference drawing 53711 5348407. Delivery is required within 143 days, with a need ship date of January 26, 2027, and a final required delivery date of June 25, 2027, shipping FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The contractor must comply with strict quality and packaging standards, including MIL-STD-129 for marking and RP001 for palletization. Specific requirements include the identification of lead or lead-free attributes per IPC/JEDEC J-STD-609 and a prohibition on the intentional addition of mercury. Inspection and acceptance will occur at the origin. All requests for waivers or deviations must be submitted to the DSC Contracting Officer for approval, and any costs for data deliverables must be factored into the unit price.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
TERMINAL JUNCTION BLOC
Solicitation # SPE7M2-26-T-6434
This contract is for the procurement of 128 units of sectional terminal junction blocks, identified by NSN 5940-01-433-8933. The items are classified as critical application items and must adhere to the Qualified Products List or Qualified Manufacturers List. Technical specifications are governed by SAE AS81714D and AS81714/17 standards, with a strict prohibition on the intentional addition of mercury or mercury-containing compounds except where functionally required by specific NAVSEA exceptions. The agreement specifies a delivery timeframe of 140 days, with a required delivery date of March 20, 2027, shipping FOB Origin to the DLA Distribution Depot Hill at Hill AFB, Utah. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The contract incorporates several technical and quality requirements, including configuration change management and the removal of government identification from non-accepted supplies.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE7M2-26-T-6169
This solicitation, numbered SPE7M2-26-T-6169, is a Request for Quotations issued by the Defense Logistics Agency (DLA) Land and Maritime Nuclear Reactor Program for the procurement of 30 plain hexagon nuts. The technical specifications identify the item as a Type I nut with a 0.875-inch diameter, manufactured from annealed and hardened Nickel Alloy Grade 500, featuring a 0.875-14UNF-2B thread. The item is classified as a commercial item and is identified by NSN 5310-01-515-8592. Delivery is required within 165 days after order direction, with a designated shipping destination at DLA Distribution San Joaquin in Tracy, California. The contract is structured with FOB Origin terms, meaning the government assumes responsibility for transportation costs and risk of loss once the items leave the origin. Strict compliance with military standards is mandatory for quality, packaging, and marking. The nuts must adhere to MIL-DTL-1222J for technical requirements and mandatory markings, which include the material symbol, manufacturer's symbol, and lot number. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, specifically utilizing a cleaning and drying preservation method. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with specific Acceptable Quality Levels (AQLs) assigned to critical, major, and minor attributes. Additionally, the contract includes stringent environmental and safety provisions, such as a prohibition on the intentional addition of mercury to hardware and requirements for hazardous material identification and labeling in accordance with the Hazard Communication Standard. All invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 5 hours
View Details
NAICS: 332999
New
DIBBS
CLAMP, WIRE ROPE, SADDLE
Solicitation # SPE7M2-26-T-6431
This contract is for the procurement of 132 saddled wire rope clamps, identified by NSN 4030-00-243-4438. The items are designated as critical application items and must be manufactured using a forging process, requiring specific tooling. Production must adhere to technical and quality requirements set forth in the DLA Master List, with preservation and packaging following MIL-DTL-12000 and marking in accordance with MIL-STD-129. Delivery is required within 62 days, with a required delivery date of December 1, 2026, to the DLA Distribution New Cumberland facility in Pennsylvania. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or packaging. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details