Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

POWER SUPPLY

Awarded

SPE7L7-26-T-4357Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of two power supplies identified by NSN 6130-01-733-2325 and part number TA27700, issued under solicitation SPE7L7-26-T-4357 by the Department of Defense through the DDSP New Cumberland Facility. Delivery is required within 161 days from the award date, with a firm delivery date of March 28, 2027, and the supplies must be shipped FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special markings. Sampling follows MIL-STD-1916 or a comparable zero-based plan, with verification levels assigned based on attribute criticality, and zero non-conformances required unless otherwise stated. The contractor must adhere to all technical and quality requirements referenced in the DLA Master List, and covered defense information provisions apply. The item is to be delivered to a specified parcel post address in New Cumberland, Pennsylvania, and transportation logistics are governed by DLA procedural notes.

General Info

Procure two power supplies, NSN 6130-01-733-2325, deliver FOB origin by March 28, 2027, comply with MIL-STD packaging and inspection standards.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

335311 - Power, Distribution, and Specialty Transformer ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(2)

SPE7L726V0746.pdf

PDF

RFQ SPE7L7-26-T-4357 for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded

PostedJul 16

Solicitation

AwardedAug 22

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressUSA

Contacts

MARIA BLANEY

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

DLA award SPE7L726V0746 posted on DIBBS. Awardee: MARTIN MILITARY INC (CAGE 1WZZ2) Total Contract Price: $10,796.00 Award Date: 08-19-2026 Solicitation: SPE7L7-26-T-4357 Line items: - POWER SUPPLY (NSN/Part 6130017332325, PR 7017438818)

Similar Contracts

Same NAICS industry code

CABLE ASSEMBLY, SPEC / NSN: 6150-01-194-1219 / P/N: 10274508

Solicitation # SPRRA226Q0060

The solicitation seeks bids for a cable assembly identified by specification and NSN 6150-01-194-1219 with part number 10274508, under a Small Business Set Aside as a total set-aside, meaning only small businesses are eligible to compete. The NAICS code 335311 indicates the contract falls under the category of wiring device manufacturing. The opportunity was posted on August 7, 2026, and responses must be submitted by 9:00 PM EDT on August 21, 2026. The contracting activity is managed by the Defense Logistics Agency Aviation at Redstone Arsenal, Alabama, with the Department of Defense as the overarching agency. All performance and delivery obligations will be fulfilled at the specified location in Redstone Arsenal. The primary point of contact for inquiries is Delora Crutcher, reachable via email, with Michael Romine available as a secondary contact. Interested vendors can access additional details through the provided SAM.gov link.

Al DLA Aviation At Huntsville

POSTED

DEADLINE

61--WIRING HARNESS

Solicitation # N0038326QSB32

The contract solicitation NSN 1R-6150-017374074-P8 for 61-WIRING HARNESS, referencing reference number 51210-0113, requests three units delivered FOB origin. It is a presolicitation issued by the Naval Supply Systems Command Weapon Systems Support under solicitation number N0038326QSB32, published on August 6, 2026, with responses due by September 21, 2026. The offering is managed by the Department of Defense through its Philadelphia, Pennsylvania office, located at 19111-5098, with no set-aside designation specified. The point of contact for inquiries is Sarah L. Austin, reachable via email at SARAH.L.AUSTIN10.CIV@US.NAVY.MIL or by phone at (215) 697-2606. The place of performance is not designated, and the delivery term places responsibility on the vendor to transport the goods from their origin point.

Navsup Weapon Systems Support

POSTED

DEADLINE

in about 1 month

Overhead Transformers Master Agreement

Solicitation # 20260819002

City of Anaheim Public Utilities Department

POSTED

DEADLINE

in about 1 month

61--CABLE ASSEMBLY,SPEC

Solicitation # N0010426QNA17

This contract solicitation, identified as N0010426QNA17, seeks the manufacture of a CABLE ASSEMBLY,SPEC in accordance with precise technical specifications derived from multiple military drawings including DWG 5893729, DWG 5894148 Rev J, and others, all under the CAGE code 53711. The requirement mandates full compliance with MIL-STD-129 for physical marking, MIL-STD-130 for item identification, and MIL-STD-973 for configuration control, with all engineering changes, waivers, and deviations requiring formal approval from the Contracting Officer. Contractors must submit two each of the 5W1, 5W2, 5W7, and 5W8 cable assemblies for qualification testing per specification 53711-5894148 Rev J before production begins. Each finished unit must be serialized with a government-assigned number obtained from NUWC Division Newport, and the entire supply chain, including subcontractors, must adhere to strict mercury-free protocols to prevent contamination of sensitive naval systems. The contract enforces a comprehensive quality management system compliant with ISO 9001 and requires production lot testing and quality conformance inspections per the referenced drawings, with all inspection records retained for four years post-delivery. Documentation such as the DD Form 1423 must accompany deliveries, and a Certificate of Compliance per DI-MISC-81356 is required prior to material shipment. The solicitation is issued under Emergency Acquisition Flexibilities and is designated as a small business set-aside with NAICS code 335311, with award based solely on the lowest aggregate price for the base quantity and the optional 365-day increase. The government has reserved the unilateral right to exercise an option for additional quantities without re-solicitation. The contract incorporates specific security protocols, requiring contractors to possess a government security clearance and authorize access to classified documents under DD Form 254. Transportation and delivery are unspecified in location but require adherence to WIDE AREA WORKFLOW payment instructions and a Stand-Alone Receiving Report certification system. All contractual documents are deemed issued upon electronic transmission. The award must be accepted bilaterally, and the resultant contract will be DO certified under the Defense Priorities and Allocations System. Additionally, the contract includes warranty provisions for one year from delivery, Buy American Act compliance, and mandatory representations

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPRMM126QKH34

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

in about 1 month

61--CABLE ASSEMBLY,SPEC

Solicitation # SPE4A626T21CW

POSTED

DEADLINE

CABLE ASSEMBLY,SPEC

Solicitation # N0010425QNF08

This contract pertains to the manufacture and delivery of a CABLE ASSEMBLY,SPEC under solicitation N0010425QNF08, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA. The requirement is governed by multiple military standards including MIL-STD-129 for marking, MIL-STD-973 for configuration control, and ISO 9001 for quality system compliance, with the primary design reference being drawing 5854902. The product must be manufactured without any metallic mercury or mercury contamination due to its intended use on submarines and surface ships, and any exception to this requirement necessitates prior written approval from the Procurement Contracting Officer along with detailed safety and containment protocols. The contractor is responsible for all inspection and quality assurance activities, with the government retaining the right to conduct independent inspections. All items must conform strictly to contract specifications, and deviations or engineering changes require formal approval prior to implementation. Packaging must adhere to MIL-STD-2073, and records of inspections must be maintained for four years after final delivery. Delivery is set for CLIN 0001AA with quantity of 323 units, and the contract is issued under emergency acquisition flexibilities with priority rating for national defense under the Defense Priorities and Allocations System. The contract is subject to bilateral execution, requiring the contractor’s written acceptance before becoming effective, and all contractual documents are considered issued upon electronic transmission. The solicitation is a total small business set-aside, and the contractor must provide facility details if packaging occurs off-site. Warranty coverage is one year from the date of delivery, and commercial and government document access guidelines are outlined, including procedures for obtaining restricted or classified materials. All technical inquiries and configuration changes must be submitted to the specified address in Mechanicsburg, PA, and subcontractors are bound by the same mercury-free and quality requirements. The point of contact for the solicitation is Zachary R. Morrill, with responses due by August 17, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

61--POWER SUPPLY

Solicitation # SPRMM126QGF91

This presolicitation, numbered SPRMM126QGF91, is issued by the DLA Mechanicsburg for the procurement of four power supply units under NSN 7H-6120-016912485-PP. The delivery terms are set as FOB Origin. Because the government does not own the technical data rights and has determined that reverse engineering or purchasing the data is uneconomical, the procurement is restricted by the availability of specific technical drawings and patterns. Interested parties can access standardized military and federal specifications through the DoD Single Stock Point or the ASSIST-Online portal. While the government is not currently utilizing FAR Part 12 for commercial item acquisition, vendors may notify the contracting officer of their ability to provide a commercial alternative within 15 days of the notice. Responses to this requirement are due by October 19, 2026.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

in about 2 months

WIRING HARNESS,BRAN

Solicitation # N0010426QUC30

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

TRANSFORMER, POWER

Solicitation # SPE7M1-26-U-4926

Solicitation SPE7M1-26-U-4926 is a Total Small Business Set-Aside issued by the Department of Defense Maritime Supply Chain for the procurement of power transformers, specifically NSN 5950015621374 and part number 500K3296 from HDT Expeditionary Systems Inc. This is an Indefinite Delivery Contract (IDC) with an estimated annual quantity of 27 units and a maximum contract value of 350,000 dollars. The contract is based on Lowest Price Technically Acceptable (LPTA) principles, with a delivery requirement of 130 days after the date of award and shipping terms set as FOB Origin. The contract mandates strict adherence to DLA packaging and marking standards, requiring compliance with MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials must follow ASTM D3951, while hazardous materials are governed by FED-STD-313 and TQ Requirement IP025. Inspection and acceptance will occur at the destination. Administrative requirements include mandatory electronic invoicing through Wide Area WorkFlow (WAWF) and compliance with various FAR and DFARS clauses, including specific notifications for radioactive materials and hazard warning labels.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-T-20GV

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE8E8-26-T-5287

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

LINER, FUEL TANK

Solicitation # SPE4A7-26-R-0714

The contract is for a liner, fuel tank item designated for use on the UH-60 helicopter, identified by NSN 1560-011215115 and part number 70211-03010-105, manufactured in full compliance with drawing 78286 70211-03010, revision K dated November 30, 2017. This procurement is structured as an indefinite quantity contract with a two-year base period and no options, issued as a total small business set-aside, with an estimated annual requirement of 80 units. All delivery of production units must be completed within 300 days of order placement, with FOB origin terms and inspection and acceptance performed at the manufacturer’s location. Access to technical data associated with this item is restricted to contractors certified under DOD 5220.22M, requiring submission of DD Form 2345 to the Defense Logistics Information Service to gain authorization. The solicitation, numbered SPE4A726R0714, will be made available exclusively through the DLA Internet Bid Board System on or about August 20, 2026, with proposals due by September 21, 2026. No paper copies will be distributed, and potential bidders must use the latest Adobe Acrobat Reader to access the PDF solicitation documents. The contracting office is located in Richmond, Virginia, with primary point of contact Ryan Loeffelholz.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Cafeteria & Catering Operation - DLA Susquehanna

Solicitation # NAFUA1-26-R-0002

The Defense Logistics Agency Family & Morale, Welfare, and Recreation is seeking qualified offerors to operate cafeteria and catering services at the Defense Distribution Center Susquehanna in New Cumberland, Pennsylvania, under solicitation NAFUA1-26-R-0002. This opportunity requires the full provision of labor, equipment, materials, and incidentals necessary to run daily food service operations, with the explicit understanding that the government will not fund these services and that the contractor is expected to generate revenue independently through customer traffic and sales. All proposals must be submitted by 4:00 PM EDT on August 27, 2026, and inquiries must be submitted in writing no later than 4:00 PM EDT on August 12, 2026. Site visits to the location are permitted but must be arranged through the Contracting Officer and completed no later than August 7, 2026. The contract is classified under NAICS code 722310 with no set-aside designation, and all communications should be directed to Michael Thompson at michael.3.thompson@dla.mil or 571-643-3754.

Food Service Contractors

POSTED

DEADLINE

Management of Government-Owned Contractor-Operated (GOCO) retail fuel facilities at Altus AFB, OK, Dyess AFB, TX, McConnell AFB, KS, Scott AFB, IL, Offutt AFB, NE, Whiteman AFB, MO.

Solicitation # SPE603-26-R-0527

The Defense Logistics Agency (DLA) Energy is soliciting six separate firm-fixed-price contracts to manage, maintain, and operate Government-Owned, Contractor-Operated (GOCO) retail fuel facilities at six U.S. Air Force bases: Altus AFB, OK; Dyess AFB, TX; McConnell AFB, KS; Offutt AFB, NE; Scott AFB, IL; and Whiteman AFB, MO. The contract requires the selected contractor to ensure the safe, accurate, and timely receipt, storage, transfer, issuance, and accountability of all Defense Wide Working Capital Fund (DWWCF)-owned petroleum products, with strict adherence to environmental, safety, security, and quality control standards. Operations must support base missions, airshows, deployments, exercises, and contingencies under all conditions, including heightened security and adverse weather, while maintaining 24/7 self-service automated fuel station availability for ground vehicles. The contractor is responsible for operator and system maintenance of all facilities, equipment, vehicles, and systems, and must conduct training to ensure personnel are fully qualified. All work must conform to detailed Performance Work Statements (PWS) for each location, including staffing, dispatching, product receipt, inventory management, laboratory testing, and quality surveillance. The procurement is set aside entirely for Service-Disabled Veteran-Owned Small Businesses (SDVOSBs) under NAICS code 493190. Offers are due by August 10, 2026, and will be evaluated under a Lowest Price Technically Acceptable (LPTA) approach, where technical compliance is a pass/fail gate requiring an Acceptable rating across all sub-factors: staffing, operations, maintenance, and contractor-furnished facilities and equipment. Contracts have a four-year base period from November 1, 2026, to October 31, 2030, with a five-year option period through October 31, 2035, and a potential six-month extension through April 30, 2036. The contractor must submit a Quality Control Plan acceptable to the Government, comply with ISO standards if used, and adhere to calibration requirements per ISO 10012. The contract mandates a Security Plan addressing physical, personnel, information, and operational security with contingency procedures for power outages, access controls, and Force Protection Conditions. The contractor assumes fiduciary responsibility for all Government-owned fuel, maintains custody without transferring title, and must

Other Warehousing and Storage

POSTED

DEADLINE

Butterfly Valve Manufacturing and Supply

Industrial Valve Manufacturing

POSTED

DEADLINE

GLOVES, MEN'S AND WOMEN

Solicitation # SPE1C1-26-T-1644

POSTED

DEADLINE

AIR CONDITIONER

Solicitation # SPE8E8-26-T-5242

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

NUT, SELF-LOCKING, EXTEN

Solicitation # SPE4A6-26-T-15MR

Solicitation SPE4A6-26-T-15MR, issued by the ASC Commodities Division of the Department of Defense, is a simplified acquisition for 474 units of self-locking nuts with extended double washers (NSN 5310-01-484-4870). The total contract value is 474.00 dollars, with a unit price of 1.00 dollar. The required delivery date is February 27, 2027, with a need ship date of February 7, 2027. Delivery is set as FOB Origin, and the items are to be shipped to the DLA Distribution Depot Hill at Hill AFB, Utah. Quality assurance and technical compliance are governed by several standards, including MIL-STD-1916 or ASQ H1331 for sampling, and MIL-STD-129 for marking and labeling. Packaging must adhere to ASTM D3951 and RP001, with the DLA Master List of Technical and Quality Requirements taking precedence. Inspection and acceptance will occur at the destination. The contract incorporates various FAR and DFARS clauses, including requirements for hazardous material identification, cyber incident reporting, and the use of the Wide Area Workflow (WAWF) system for electronic invoicing and payment requests.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-348V

POSTED

DEADLINE

Solicitation # SPE2DS-26-T-356L

POSTED

DEADLINE

NUT, SELF-LOCKING, BLIND

Solicitation # SPE4A6-26-T-20QY

POSTED

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE8E5-26-T-4024

DLA Troop Support is soliciting quotes for the procurement of observation windows under NSN 9340014392377. The requirement is split into two lines: Line 0001 for 10 units to be delivered within 261 days after the order, and Line 0002 for one unit to be delivered within 30 days after the order. All items are to be delivered to DLA Distribution Anniston. This opportunity, identified by solicitation number SPE8E526T4024, is a total small business set-aside under NAICS code 333924. Interested and responsible sources must submit their quotes electronically by the deadline of August 31, 2026. The procurement is managed by the Department of Defense through their office in Philadelphia, Pennsylvania.

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7L5-26-T-5056

POSTED

DEADLINE