Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Power Supply Assembly Manufacturing

Active

Federal

Response Deadline07/31/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

A subcontract is being issued for the design, fabrication, testing, and delivery of a single Power Supply Assembly designated by NSN 6130-01-476-2036, requiring full compliance with military technical specifications. The deliverable must include complete documentation, proper packaging and marking, and adherence to current cybersecurity standards, ensuring the unit is ready for immediate integration into defense systems. All work must be performed in accordance with the stringent quality and security protocols expected by the Department of Defense. The solicitation, posted by the Defense Logistics Agency on July 20, 2026, has a response deadline of July 31, 2026, and is classified under NAICS code 334416 for electrical equipment manufacturing. The place of performance is listed as FPO with ZIP code 96675, indicating delivery to a military postal address. This opportunity is open to qualified subcontractors with proven capability in military-grade power system development and must meet all federal contractual obligations without set-aside restrictions.

General Info

Design, fabricate, test, and deliver military-grade power supply per DoD specs with cybersecurity compliance and documentation by July 31, 2026.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor ManufacturingView NAICS

Place of Performance

FPO, AP, 96675, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Design, fabrication, testing, and delivery of one Power Supply Assembly (NSN: 6130-01-476-2036) compliant with military specifications, including full documentation, packaging, marking, and cybersecurity standards.

Similar Contracts

Same NAICS industry code

Manufacturing of Fixed Micro Capacitors (MIL-DTL-39028 Compliant)The contract requires the manufacture of 72 fixed micro capacitors fully compliant with MIL-DTL-39028 specifications, encompassing all stages from sourcing raw materials and assembly to rigorous testing, proper packaging, and accurate marking for traceability and compliance. The work must be completed in accordance with military standards, ensuring performance, reliability, and environmental resilience under operational conditions expected in defense applications. All deliverables must meet stringent quality control benchmarks and documentation requirements to validate conformance throughout the production lifecycle. The contract is issued as a subcontract under the NAICS code 334416 for electronic component manufacturing, with performance scheduled to occur at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, indicating a narrow twelve-day window for proposal submission. The contracting activity falls under the Department of Defense through its Active Devices Division, signifying this is part of a critical defense supply chain requiring adherence to federal procurement protocols and readiness for inspection and audit. Delivery timelines and compliance verification are central to fulfilling contractual obligations successfully.

ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

Radio Frequency Coil Manufacturing and SupplyThe contract requires the manufacture and supply of three Radio Frequency Coils identified by National Stock Number 5950-01-223-9021 and part number 11449949-9, all of which must strictly comply with applicable military specifications and the National Defense Authorization Act of 2018 provisions that prohibit the use of telecommunications equipment from certain restricted vendors. The product must be produced and assembled in accordance with defense standards to ensure operational reliability and supply chain integrity, with special attention to sourcing components from approved and compliant suppliers. All units are to be delivered to the designated place of performance in Chambersburg, Pennsylvania, with final inspection and acceptance procedures governed by defense procurement protocols. This subcontract, issued under the NAICS code 334416 for Electromedical and Electrotherapeutic Apparatus Manufacturing, is managed by the Department of Defense through the MARITIME SUPPLY CHAIN ESOC BUYS organization. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and interested parties must submit proposals through the DIBBS platform using the provided link. Compliance with all federal procurement regulations, including those related to cybersecurity, supply chain risk management, and export control, is mandatory. Failure to meet the NDAA 2018 restrictions or military specifications will result in automatic disqualification or contract termination.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

RF Interference Filter Supply (COTS Component)The contract entails the supply of 108 commercial off-the-shelf radio frequency interference filters designed to meet stringent military packaging, labeling, and cybersecurity requirements. These components are intended for use in defense-related systems where electromagnetic compatibility and secure data integrity are critical. The items must comply with all applicable military standards without custom modification, leveraging existing COTS products to ensure rapid deployment and cost-efficiency while maintaining operational reliability under demanding environmental conditions. Issued as a subcontract under the Defense Logistics Agency, part of the Department of Defense, the procurement falls under NAICS code 334416, which encompasses electromagnetic and electronic warfare equipment manufacturing. The contract was posted on July 20, 2026, and is managed through the DIBBS system with the contract number SPE7M026V4714. Performance location details are unspecified, indicating potential flexibility in delivery or reliance on existing defense supply chains. No set-aside provisions or small business designations are indicated, and all units must be delivered with full documentation confirming compliance with defense-grade security and labeling protocols.

Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

Pulse Forming Network (PFN) Component ManufacturingThe contract seeks the manufacture and delivery of four high-reliability Pulse Forming Network units, identified by NSN 5915014436478, for use in pulsed power systems. These electronic assemblies are critical components requiring strict adherence to performance and durability standards, with all units to be produced and delivered to the specified place of performance in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation falls under the NAICS code 334416, classifying it within the electronic component manufacturing sector, and is issued as a subcontract under the Department of Defense’s Active Devices Division. The opportunity was posted on July 20, 2026, with responses due by July 31, 2026, providing a narrow ten-day window for potential suppliers to submit proposals. No set-aside provisions or specific organization types are indicated, meaning the contract is open to qualified commercial entities regardless of size or status. The official solicitation can be accessed via the provided DIBBS link, and while no point of contact is listed, all inquiries must be directed through the designated procurement channel referenced in the posting. Delivery timelines, technical specifications, and compliance documentation will be central to any successful bid, given the mission-critical nature of the components.

ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

Thermal Resistor Component SupplyThe contract involves the supply of a military-spec thermal resistor identified by NSN 5905-01-524-1193, with strict compliance required to MIL-STD-129 for marking and packaging and J-STD-609 for soldering and interconnection standards. Delivery must be completed within 30 days of contract award, ensuring timely integration into defense logistics streams. The item falls under NAICS code 334416, indicating it is classified within the electronic component manufacturing sector, and the procurement is structured as a subcontract under the Department of Defense’s Maritime Supply Chain ESO BUYS organization. The solicitation was posted on July 20, 2026, with a response deadline of July 23, 2026, indicating a rapid procurement timeline typical of urgent defense supply needs. All offerings must meet exacting military compliance standards without exception, and performance is expected to align with DoD logistics protocols. The contract is administered through the DIBBS platform, and while the place of performance and point of contact details are not specified, the requirement remains firm that the thermal resistor be furnished in full compliance with applicable defense specifications and delivered on schedule.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

CAP, ELECTRICALThe contract pertains to the procurement of 63 electrical capacitors identified by NSN 5999-01-449-1435, with a delivery requirement of 168 days after award. The solicitation, numbered SPE7M5-26-T-309P, was posted on July 9, 2026, and responses are due by July 20, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific references marked by R or I numbers, and the applicable revision is determined based on the acquisition size and timeline, either the solicitation issue date or award date, unless an amendment supersedes it. Government identification must be removed from non-accepted supplies, and all items must be physically marked per RQ017 requirements. Offerors must submit a complete data package for both the approved and alternate parts, as no data is currently available. The place of performance is New Cumberland, Pennsylvania, 17070-5002, and the acquiring agency is the Department of Defense’s Active Devices Division under NAICS code 334416. Primary point of contact is Margaret Smith, reachable via email and phone provided.

ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

SHIELDING GASKET, ELECTThe contract is for 40 units of a shielding gasket, electronic, identified by NSN 5999-01-312-3955 and part number 19-11-C957-1212 manufactured by Parker-Hannifin Corporation. Delivery is required within 168 days to the DLA Distribution facility in New Cumberland, Pennsylvania, under FOB Origin terms with zero variance allowed in quantity. All items must comply with DLA’s Packaging Requirements and be marked and labeled per MIL-STD-129. Packaging must adhere to ASTM D3951 for non-hazardous items or TQ requirement IP025 if classified as hazardous under FED-STD-313, with DLA Master List requirements superseding all other standards. The gasket must not contain any Class I ozone-depleting substances unless written approval from the Contracting Officer is obtained, and this prohibition overrides any conflicting specifications without waiving performance criteria. Sampling and inspection follow MIL-STD-1916 or a comparable zero-based plan with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are verified at levels VII, IV, and II respectively. The unit of issue is each (EA), and palletization must follow DLA packaging guidelines. Inspection and acceptance occur at the destination, with the need ship date set for January 5, 2027, and the original required delivery date set for January 15, 2027. All technical and quality requirements referenced are governed by the DLA Master List effective as of the solicitation issue date, and the contract was issued under solicitation SPE7M5-26-T-308N with a response deadline of July 23, 2026.

ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

FUSE, INCLOSED LINKThis contract, issued under solicitation number SPE7M5-26-T-312H by the Department of Defense’s Active Devices Division, seeks the procurement of FUSE, INCLOSED LINK components with part numbers FIL100 and SA20635-100 from SOURIAU USA, INC., designated as commercial items for critical application use in defense systems. Delivery of 61 units is required at Robins Air Force Base, Georgia, with a 168-day delivery window from the as-directed date, and the items must be delivered FOB origin and accepted at destination. Packaging must strictly follow DLA Master List of Technical and Quality Requirements, superseding ASTM D3951, with non-hazardous items packaged per ASTM D3951 and hazardous items conforming to TQ Requirement IP025 as defined by FED-STD-313. All packaging and labeling must adhere to MIL-STD-129, including proper identification of unit of issue and quantity per unit pack, with palletization governed by RP001. The contract mandates full compliance with applicable technical data referenced in the DLA Master List, even if the full technical data set is not provided. The contract incorporates extensive federal and defense regulations through mandatory clauses spanning FAR and DFARS, including cybersecurity requirements under 252.240-7997 and 252.204-7012, prohibitions on covered telecommunications equipment under 252.204-7018, and trafficking in persons and employment eligibility verification under 52.222-50 and 52.222-54. The contractor must hold a current Unique Entity Identifier and CAGE code, and is subject to continuous compliance with socioeconomic representations including small business status. Payment processing is required through WAWF, and invoicing must align with electronic submission protocols. The contract includes deviation approvals for several clauses, including those related to equal opportunity, sustainable products, and safeguarding information systems. A 0% tolerance range applies to quantity delivery with no authorized variance. The original delivery date is May 1, 2027, with an earlier need ship date of January 5, 2027, indicating urgency in supply chain timing. The contract type remains undetermined as a placeholder, but it operates under Simplified Acquisition Procedures, with price fixed at $61.00 per

ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

FILTER, RADIO FREQUENCYThe contract is for the procurement of 18 units of a Radio Frequency Interference Filter with NSN 5915-01-340-5766, issued under solicitation SPE7M5-26-T-317B by the Defense Logistics Agency’s Active Devices Division. The requirement is a total small business set-aside under FAR 19.5, with submissions due by July 23, 2026, and delivery required at the DLA Distribution Jacksonville facility in Florida by 293 days after order placement, with a need ship date of May 10, 2027, and original delivery deadline of July 13, 2027. FOB terms are origin, and payment will be processed through WAWF as mandated. The item is subject to strict export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, even within the U.S., and access is restricted to DLA contractors with approved JCP certification, completed training on handling DOD export-controlled data, and formal authorization. Packaging and marking must comply with RP001, MIL-STD-129, ASTM D3951, and FED-STD-313, with hazardous materials subject to TQ IP025 and 29 CFR 1910.1200 labeling, unless exempt under specific federal statutes. Radioactive materials exceeding specified activity thresholds require distinct labeling. The contractor must comply with DFARS 252.204-7012 for safeguarding covered defense information, implement NIST SP 800-171 controls, report cyber incidents within 72 hours, and adhere to CMMC Level 2 certification as a mandatory eligibility requirement. Offerors must maintain current UEI and CAGE codes, affirm small business status, and submit accurate socioeconomic representations. Unauthorized obligations are unenforceable, and whistleblower protections are enforced. All proposals must be submitted electronically via DIBBS, with no physical submissions accepted. Contract type remains unspecified pending contracting officer determination, and no pricing data is available in the solicitation. The government conducts inspection and acceptance at destination, with quality standards governed by the referenced military and federal standards.

ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

RESISTOR NETWORK, FIXEDThe contract specifies the procurement of a fixed film resistor network with the NSN 5905012185402 and part number M8340108K3320FC, manufactured in accordance with MIL-PRF-83401H Sup 1 and MIL-PRF-83401/8E Rev E, both dated May 29, 2024. This is a critical application item requiring strict compliance with国防部 technical and quality requirements referenced from the DLA Master List, and the use of any Class I ozone-depleting substances is strictly prohibited unless explicit written approval from the Contracting Officer is obtained. The item must be packaged per MIL-STD-2073-1E with marking in accordance with MIL-STD-129, including specific lead finish labeling per IPC/JEDEC J-STD-609 to identify Pb or Pb-free attributes on each unit package. ESD and EMI protection is mandatory, requiring MIL-PRF-81705 qualified packaging materials—Type I barrier material for both ESD and EMI protection, with verification that all materials are sourced from manufacturers listed on QPL-81705. The supplier must ensure physical protection of leads and terminals to prevent damage during handling and transport. Delivery is required within five days FOB origin, with no quantity variance allowed, and inspection and acceptance occur at the destination. The item must be shipped via traceable freight methods, not parcel post, to Robins AFB, Georgia, with the original required delivery date set for July 17, 2026.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

POWER SUPPLY ASSEMBLYThe contract pertains to the procurement of a single Power Supply Assembly identified by NSN 6130-01-476-2036, with a delivery requirement of 20 days ADO. The solicitation, issued by the Defense Logistics Agency under number SPE7L7-26-T-4377, is open for response until July 31, 2026, and falls under NAICS code 334416 for electronic component manufacturing. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision tied to the solicitation issue date. The contractor must comply with DLA packaging standards and cannot intentionally introduce mercury or mercury compounds into the product except for specific approved applications such as batteries, fluorescent lights, or sensors as defined by NAVSEA, with additional containment requirements for portable devices. Sampling procedures must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on their criticality. The contractor is required to maintain a Cybersecurity Maturity Model Certification Level 2 self-assessment and must remove any government identification from non-accepted supplies. Technical data is not provided by DLA, and performance is to occur at FPO, with Michael Francis designated as the primary point of contact.

Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

SHIELDING GASKET, ELECTThe contract is for the procurement of six shielding gaskets classified under NSN 5999-01-341-6563, with a total purchase request quantity of 70 units, to be delivered within 92 days after award. The item is subject to strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which governs compliance based on the revision in effect on either the solicitation issue date or award date depending on the acquisition size. The gasket contains technical data controlled under export regulations, either ITAR or EAR, prohibiting unrestricted disclosure or export to foreign persons or entities without explicit authorization from the Department of State or Department of Commerce; DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors with validated US/Canada Joint Certification Program status, completed DOD export control training, and approved DLA authorization. The solicitation number is SPE7M5-26-T-337P, issued on July 20, 2026, with responses due by July 31, 2026, under NAICS code 334416. Performance is required in Jacksonville, Florida, with Margaret Smith of the Department of Defense’s Active Devices Division serving as the primary point of contact. The contract mandates that all supplies be free of government identification if non-accepted and requires the shielding material to be supplied in a continuous 160-inch length. Cybersecurity compliance under CMMC Level 2 by a certified third-party assessment organization is also required.

ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Epinephrine Injection (NSN: 6505015273957)The contract mandates the manufacture, packaging, labeling, and delivery of FDA-approved Epinephrine Injection meeting all current Good Manufacturing Practices and Defense Logistics Agency specifications, with the final product destined for a U.S. Navy vessel under FOB Destination terms. The product is identifiable by National Stock Number 6505015273957 and falls under the NAICS code 283410, indicating its classification within pharmaceutical manufacturing. All activities must adhere strictly to regulatory and military standards to ensure safety, potency, and compliance throughout the supply chain. The agreement is structured as a subcontract managed under the Department of Defense through the Defense Logistics Agency, with the work scheduled to be performed in alignment with federal procurement timelines and delivery protocols. The contract was posted on July 20, 2026, and the delivery endpoint is a U.S. Navy vessel, requiring precise logistical coordination and documentation to meet military operational needs. The product must be fully compliant with both FDA and DLA requirements, including proper labeling, traceability, and packaging suitable for military transport and storage conditions.

POSTED

about 20 hours ago

DEADLINE

Wiper Ring Supply – Precision Sealing ComponentThe contract entails the supply of 17 precision-engineered wiper rings, identified by Part Number 351-44900-330A and National Stock Number 5330-01-284-1598, manufactured to meet specific military standards for performance and reliability. Each unit must comply with all relevant technical and quality requirements, including proper packaging and labeling as dictated by defense regulations. Delivery must be completed in full accordance with established logistical protocols to ensure operational readiness and traceability. The contract is structured as a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, and classified under NAICS code 332996, indicating its focus on other fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to align with DLA’s supply chain directives, though the specific delivery location and point of contact are not detailed. Access to official contract records is available through the DIBBS portal using the provided reference number.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 20 hours ago

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information handled by the contractor. This includes establishing and sustaining a compliant security posture across systems and networks that process, store, or transmit sensitive defense data, ensuring that all required controls are properly configured, monitored, and documented. The contractor must also be prepared to support timely and accurate cyber incident reporting in accordance with federal requirements, enabling rapid response and coordination with defense authorities when security breaches or anomalies occur. This subcontract falls under the NAICS code 541512 for computer systems design services and is issued by the Defense Logistics Agency under the Department of Defense. The work is focused on sustaining compliance with stringent federal cybersecurity standards, and while no specific location is listed for performance, the obligations apply wherever covered defense information is accessed or managed. The contract underscores a critical requirement for continuous adherence to NIST controls and active participation in the defense cyber incident response framework, making cybersecurity expertise and operational readiness key to successful contract execution.

Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE

Hazardous Materials Compliance & DocumentationThe contract requires strict adherence to OSHA Hazard Communication standards and DFARS 252.223-7001 for all hazardous materials linked to connectors, ensuring proper labeling and accurate safety data sheet generation to meet federal regulatory requirements. All documentation must align with current guidelines to facilitate safe handling, storage, and disposal of chemical substances used in the procurement and integration of these components. This subcontract, issued under NAICS code 541620 by the Defense Logistics Agency within the Department of Defense, mandates compliance as a non-negotiable condition of performance. While specifics on location or point of contact are not provided, the obligation extends to all stages involving hazardous materials associated with connectors, and failure to deliver compliant labeling and SDS documentation could result in contract non-compliance. The posting date indicates this requirement is active for future performance beginning in 2026.

Environmental Consulting Services

POSTED

about 20 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires the performance of zero-defect quality inspections using either MIL-STD-1916 or ASQ H1331 sampling methods to verify that all delivered products meet the stringent acceptance standards of the Defense Logistics Agency. These inspections are critical to ensuring full conformance and are conducted to support DLA’s mission of reliably supplying defense systems and materiel with no tolerance for nonconformities. The work is classified under NAICS code 541330, indicating it falls within the professional, scientific, and technical services sector, specifically in the realm of quality assurance and inspection. The contract is structured as a subcontract and is tied directly to DLA operations under the Department of Defense, with performance expected to align precisely with federal quality benchmarks without deviation. All activities must be executed to guarantee that every unit received by DLA is fully compliant, with no room for defective or nonconforming product acceptance.

Engineering Services

POSTED

about 20 hours ago

DEADLINE

Packaging and Marking of Military-Grade ComponentsThe contract requires the provision of packaging and marking services for electrical connectors in strict compliance with MIL-STD-2073-1E for packaging standards and MIL-STD-129 for item marking, all in support of the Defense Logistics Agency. The components are destined for military use under the Department of Defense and must meet exacting federal specifications to ensure durability, traceability, and logistical compatibility across the defense supply chain. The work is structured as a subcontract under NAICS code 423840, which pertains to wholesale trade of electronic components and equipment, indicating the scope is focused on preparation and shipment readiness rather than manufacturing. Performance is expected to align with DLA’s standards for federal supply systems, though no specific location for performance or point of contact is listed. The solicitation is posted under contract SPE7M126V050N and was published on July 20, 2026, with no set-aside provisions indicated, meaning it is open to all qualified subcontractors. Full adherence to military standards is critical, as non-compliance could result in rejection of shipments, delays in delivery, or financial penalties. All packaging must preserve the integrity of the connectors during transport and storage, while marking must include universally recognized DOD identifiers, barcodes, and data matrix codes to enable automated receipt and inventory management at military depots worldwide.

Industrial Supplies Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Supply of Electrical Plug Connectors (MS3406D40-56P / NSN 5935011427787)The contract entails the manufacture and supply of 43 military-spec electrical plug connectors specified as MS3406D40-56P with the NSN 5935011427787, all of which must fully comply with applicable MIL standards to ensure reliability and interoperability in defense systems. The item is critical for military applications requiring high-performance electrical connections under demanding environmental and operational conditions. This is a subcontract issued under the authority of the Defense Logistics Agency within the Department of Defense, with a posting date of July 20, 2026, indicating it is part of a broader procurement effort managed through the DLA’s contracting system. The NAICS code 334417 confirms the scope falls within the aerospace and electronic component manufacturing sector. Performance location and specific delivery details are not yet defined, and no set-aside provisions are indicated, meaning the contract is open to all eligible contractors. The sole point of reference for award and tracking purposes is the DIBBS system under contract number SPE7M126V050N.

Electronic Connector Manufacturing

POSTED

about 20 hours ago

DEADLINE

Domestic Freight and Delivery to DLA DepotTwo reconditioned circuit card assemblies must be transported from the rework facility to the DLA Distribution Depot in Tracy, California, with delivery required no later than August 19, 2026. The shipment is governed by FOB Origin terms, meaning the buyer assumes all risk and responsibility for the goods once they leave the rework facility. The contract falls under NAICS code 484220, indicating it is a domestic freight transportation service, and is classified as a subcontract within the Department of Defense framework. The Defense Logistics Agency is the contracting organization, and the work is being performed under solicitation SPE4A626PX555, with the opportunity posted on July 20, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

Supply Chain Traceability and Documentation ServicesThe contract requires the compilation and verification of detailed documentation to establish the prior government ownership and reconditioning history of surplus electronic items, ensuring full compliance with federal requirements prior to submission. This work is critical for maintaining the integrity and traceability of the defense supply chain, as accurate records are necessary to confirm legal and regulatory adherence throughout the lifecycle of the equipment. The contractor must rigorously authenticate provenance and reconditioning data to support transparency and accountability in the disposition process. This subcontract is part of a larger effort managed by the Defense Logistics Agency under the Department of Defense, aligning with NAICS code 541611 for management consulting services. The project involves meticulous record gathering, validation, and formatting to meet stringent government standards, with no specific location specified for performance. The solicitation was posted in July 2026 and is tied to contract SPE4A626PX555, indicating its role within an established procurement pathway for supporting defense logistics operations.

Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

Inspection, Packaging, and Marking of Reconditioned ElectronicsThe contract pertains to the final inspection, preservation, packaging, and labeling of reconditioned circuit card assemblies to ensure full compliance with military packaging and marking standards. This effort is critical to maintaining the integrity, functionality, and traceability of electronic components used in defense systems, requiring strict adherence to established federal and military specifications throughout every phase of handling. The work involves detailed quality control procedures to verify that each assembly meets performance criteria prior to being preserved against environmental degradation, securely packaged, and accurately labeled in accordance with mandated military protocols. This subcontract is issued under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 493190 for other warehousing and storage. The solicitation was posted on July 20, 2026, and the place of performance is not specified, suggesting the work may be conducted at any approved contractor facility capable of meeting the rigorous defense standards. The contract's purpose is to support the sustainment and readiness of military electronics by ensuring that reconditioned components are handled, stored, and shipped with the same precision and reliability as new units, thereby reinforcing the logistical backbone of defense operations.

Other Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

Reconditioning of Government Surplus Circuit Card AssembliesThe contract entails the reconditioning of government surplus circuit card assemblies to restore them to original technical specifications and military standards for reuse. This involves the systematic replacement of expired or degraded components, thorough functional testing to ensure operational integrity, and adherence to all applicable military performance and reliability requirements. The work must be performed with precision to guarantee that the returned assemblies meet the identical functional and environmental criteria as newly manufactured units, ensuring they are fully viable for military systems and platforms. This subcontract is issued under the Defense Logistics Agency within the Department of Defense and falls under NAICS code 334418 for electronic component and product manufacturing. The solicitation was posted on July 20, 2026, and the performance location and point of contact details are not specified, though the work is tied to DLA’s broader initiative to extend the life cycle of critical electronic assets. The contractor is expected to deliver reconditioned assemblies that are fully compliant, documented, and ready for immediate integration into defense systems without the need for additional modification or qualification.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 20 hours ago

DEADLINE

Cybersecurity Compliance (CMMC Level 2)The contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to protect covered defense information, ensuring alignment with the Defense Federal Acquisition Regulation Supplement (DFARS) 252.204-7012. This includes establishing robust cyber incident reporting procedures to meet federal requirements for timely disclosure of security breaches involving sensitive defense data. The work must support compliance at the Cybersecurity Maturity Model Certification Level 2 standard, which demands a structured approach to cybersecurity readiness, documentation, and continuous monitoring across the organization’s information systems. The effort is classified as a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code for computer systems design and related services. Performance is expected to be carried out in support of federal defense operations, with no geographic restrictions specified.

Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE