Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Power Transformer Supplier

Active

Federal

Response Deadline09/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity with the Department of Defense Maritime Supply Chain involves the manufacture or sourcing of power transformers. The supplier must ensure all units meet NSN 001107833 and FSC 5950 specifications, while adhering to the RA001 DLA Master List of Technical and Quality Requirements and FAR 52.223-3 guidelines for hazardous material identification. The contract is categorized under NAICS code 335311 and specifies a place of performance in New Cumberland, Pennsylvania. Interested parties must submit their responses by September 28, 2026, to provide the physical power transformer units required for prime contractors.

General Info

DoD subcontract for power transformers meeting NSN 001107833 specifications by September 28, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

335311 - Power, Distribution, and Specialty Transformer ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M1-26-T-354X.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TRANSFORMER, POWER

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 15

subcontract

Response DeadlineSep 28

Submission deadline

Response Deadline

09/28/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies a Power Transformer for prime contractors delivering Maritime Supply Chain contracts. Manufactures or sources transformers meeting NSN 001107833 and FSC 5950 specifications. Adheres to RA001 DLA Master List of Technical and Quality Requirements and FAR 52.223-3 for hazardous material identification. Delivers the physical Power Transformer unit.

Similar Contracts

Same NAICS industry code

Solicitation # SPE7M1-26-T-355L

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CABLE ASSEMBLY, POWER, E

Solicitation # SPE4A6-26-T-30TZ

ASC COMMODITIES DIVISION

POSTED

DEADLINE

SENSING ELEMENT, FIRE D

Solicitation # SPE8E8-26-T-5655

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E8-26-T-5673

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

LEAD, ELECTRICAL

Solicitation # SPE4A6-26-T-30SQ

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CABLE ASSEMBLY, SPEC / NSN: 6150-01-194-1219 / P/N: 10274508

Solicitation # SPRRA226Q0060

The Defense Logistics Agency Aviation at Huntsville has issued solicitation SPRRA226Q0060 for the procurement of eight units of cable assembly, identified by NSN 6150-01-194-1219 and part number 10274508. This requirement is a Small Business Set-Aside under NAICS code 335311. The government intends to award the contract using the Lowest Priced Technically Acceptable (LPTA) evaluation procedure, selecting the offeror that provides a technically acceptable proposal at the lowest overall price. Interested parties must conform to all solicitation requirements, including technical specifications, representations, and certifications. Detailed technical data is available via the DoD SAFE site upon request to the contract specialist, and because the data is subject to export controls under the Arms Export Control Act, offerors must maintain an active United States/Canada Joint Certification Program (JCP) certification. The contract includes specific requirements for a Government Production Lot Test and requires the delivery of First Article Test reports electronically. Packaging and marking must strictly adhere to MIL-STD-2073-1 and MIL-STD-129 standards, with all wood packaging material being ISPM-15 compliant. The delivery destination is the US Army Aviation and Missile Command Redstone Technical Test Center in Cottonwood, Alabama, with inspection occurring at the origin and acceptance at the destination. Offerors are required to submit a completed simplified solicitation form that includes administrative data, separate pricing for first article and production units, and a proposed delivery schedule for the FAT unit, production units, and test reports. The solicitation is subject to Buy American and Trade Agreement clauses, noting that one or more items may be subject to Free Trade Agreements.

Al DLA Aviation At Huntsville

POSTED

about 5 hours ago

DEADLINE

in about 1 month

UNICOR RFQ Cables

Solicitation # MA26-397MC

Inc Federal Prison Industries

POSTED

about 5 hours ago

DEADLINE

Emergency Generator & Load Bank SupplyThis subcontract involves the supply of a complete 750kW emergency backup generator system for pump station projects within the City of Roseville. The scope of work includes the manufacture and delivery of a radiator-cooled unit equipped with a blower fan, electronic isochronous governor, battery system, critical grade silencer, and an integral load bank. The delivery package must also include the generator unit, load bank, and a sub-base diesel tank. All equipment must strictly adhere to EPA Certified Tier 2 standards and meet the specific requirements set by the Placer County Air Quality Board. The project is located in Roseville, California, with a response deadline of October 21, 2026.

City of Roseville

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Supply of Special Purpose Electrical Cable Assemblies (NSN 6150017139955)This subcontract involves the manufacture or sourcing of 12 units of special purpose electrical cable assemblies under NSN 6150017139955 for primes delivering DLA Aviation supply contracts. The work is managed by the Department of Defense through the ASC Supplier Oper OEM Division and will be performed in New Cumberland, Pennsylvania. The contractor is required to adhere to specific technical standards, including marking per MIL-STD-129 and palletization according to RP001 DLA Packaging Requirements. The opportunity is categorized under NAICS code 335311, with a response deadline set for September 23, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

DC Motor Supply (NSN 6105-00-912-5847)This subcontract under the Department of Defense for Maritime Supply Chain ESOC Buys involves the procurement of one Direct Current Motor, identified by NSN 6105-00-912-5847. The supplier must be an approved source or authorized dealer capable of manufacturing or distributing the product in strict accordance with Navy Critical Safety Item standards. Compliance requirements include precise marking per MIL-STD-129 and the implementation of Item Unique Identification as specified by MIL-STD-130. The opportunity falls under NAICS code 335311, with a response deadline of September 18, 2026.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Push Switches (NSN 5930010203934)This subcontract opportunity with the Department of Defense LAND SUPPLY CHAIN agency involves the procurement of specialized push switches identified by NSN 5930010203934. The selected provider will supply these components to prime contractors, ensuring all items meet strict quality assurance standards per MIL-STD-1916 or ASQ H1331. Additionally, the contractor must adhere to FED-STD-313 and TQ IP025 for hazardous materials packaging and follow MIL-STD-129 for all packaging markings. The contract is designated as a Total Small Business Set-Aside under NAICS code 335311. Interested parties must submit their responses by September 30, 2026, following the posting date of September 15, 2026. All deliverables must be packaged and labeled in accordance with the specified military standards to ensure compliance with agency requirements.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Rotary Switches (NSN 5930-01-144-4940)This subcontract with the Department of Defense Electrical Devices Division involves the manufacture and supply of two rotary switches under NSN 5930-01-144-4940. The items must be produced in accordance with MIL-DTL-15291H Revision H, with a strict requirement for zero non-conformances per STD-105/ASQ Z1.4. Delivery is set as FOB Origin. Compliance requirements include packaging and marking per MIL-STD-2073-1E and MIL-STD-129, as well as the provision of hazard warning labels and MSDS documentation per 29 CFR 1910.1200. The opportunity falls under NAICS code 335311, with a response deadline of September 28, 2026.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

FEED, AIR COMPRESSOR

Solicitation # SPE7M1-26-Q-1500

The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of nine air compressor feeds under solicitation number SPE7M126Q1500. This requirement is designated as a total Small Business Set Aside and falls under NAICS code 333912. The approved source for this item is 56529 130009-210, and delivery is required within 30 days after receipt of the order to DLA Distribution. Interested responsible sources must submit their quotes electronically by the deadline of September 21, 2026. The solicitation is available as an RFQ via the provided online link, though hard copies and specific technical drawings are not available. All inquiries should be directed to the buyer via the DIBBS portal or the specified email contact.

POSTED

DEADLINE

WIRE, ELECTRICAL

Solicitation # SPE7M1-26-T-355Z

Other Aluminum Rolling, Drawing, and Extruding

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-355W

Industrial Valve Manufacturing

POSTED

DEADLINE

BACKSHELL, ELECTRICAL C

Solicitation # SPE7M1-26-U-6128

Electronic Connector Manufacturing

POSTED

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-26-T-355K

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-355S

Hardware Manufacturing

POSTED

DEADLINE

CYLINDER ASSEMBLY, H

Solicitation # SPE7M1-26-T-355V

Motor Vehicle Brake System Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-355Q

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

SEAL ASSEMBLY, SHAFT

Solicitation # SPE7M1-26-T-355X

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-355T

Aircraft Manufacturing

POSTED

DEADLINE

PUMP, AXIAL PISTONS

Solicitation # SPE7M1-26-T-355U

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS