Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

PR23696 47064-260316 Radiation Portal Monitors

Active

WS5685065876International

Response Deadline08/27/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Government of Canada through the Department of Public Works and Government Services is soliciting proposals for Radiation Portal Monitors under solicitation number WS5685065876, open exclusively to prequalified respondents previously selected under ITQ 47419-264488 for Radiation Detection Systems and Support – Stream 1 – Portal Radiation Detection Systems. The solicitation, posted on July 27, 2026, requires responses to be submitted by August 27, 2026, and all delivered systems must perform at locations across Canada as specified in the contract scope. The contracting authority is Stephen Van Den Hanenberg, who serves as the primary point of contact for all inquiries related to this procurement. This initiative is part of a broader federal effort to enhance national radiation detection capabilities at key entry points, ensuring public safety through reliable, standardized portal monitoring technology compliant with existing government standards.

General Info

Government seeks prequalified vendors for radiation portal monitors across Canada by August 27, 2026.

Agency

Government of Canada → Department of Public Works and Government ServicesView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

Canada, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation

PostedJul 27

Solicitation

Response DeadlineAug 27

Submission deadline

Response Deadline

08/27/2026, 07:00:00 PM UTCin 30 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of Public Works and Government Services

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Department of Public Works and Government Services

View Agency Profile

Office AddressN/A

Contacts

Van Den Hanenberg Stephen (SPAC/PSPC) (il-lui / he-himContracting Authority

contact@example.gov

Full Description

Show more

47064-260316 - Request for Proposal - Radiation Portal Monitors This is a Request for Proposal (RFP) for Radiation Portal Monitors for prequalified respondents under ITQ 47419-264488 Radiation Detection Systems and Support - Stream 1 – Portal Radiation Detection Systems.

Similar Contracts

Same NAICS industry code

VALVE PORT, NEEDLE FREEVALVE PORT, NEEDLE FREE is a sterile, needleless connector designed for use in medical applications requiring neutral displacement and touch-free operation, supplied in peel pouches to maintain sterility. Each package contains 200 units, with the contract calling for three packages totaling 600 units. The item has a non-extendable shelf life of 60 months, and no more than nine months may have elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with DLA requirements, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Bidders must clearly identify the source and part number being offered. The NSN is 6515-01-591-5707, with a delivery requirement of 20 days after order award, and performance is mandated at Fort Bliss, Texas. The solicitation, issued under SPE2DS-26-T-277A, was posted on July 28, 2026, with responses due by August 3, 2026, and is administered by the Department of Defense’s Medical Supply Chain under the NAICS code 334511. Point of contact for inquiries is Dorothy Marquis, reachable via email or phone provided.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

BLOOD RECIPIENT SET, INThe contract specifies the procurement of 48 units of a Blood Recipient Set designed for indirect transfusion, featuring a Y-type blood and solution set with a standard large blood filter ranging from 170 to 260 microns and a pressure pump. The set includes two ClearLink Luer actuated valves, one positioned 6 inches and the other 42 inches from the male Luer lock adapter, with an approximate drop rate of 15 drops per milliliter and an overall length of approximately 99 inches or 2.5 meters. Each unit must be sealed in a protective container to prevent damage and shipped in commercial exterior packaging suitable for safe transport via common carriers at the lowest cost to the designated delivery point at Fort Bragg, North Carolina. All packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements apply. The NSN is 6515-01-593-0865, the solicitation number is SPE2DS-26-T-277W, bids are due by August 3, 2026, and delivery is required within 20 days of award. The item falls under NAICS code 334511 and is managed by the Department of Defense’s Medical Supply Chain.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

ELECTRODE GEL, ELECTROMThe contract specifies the procurement of electrode gel for electromedical use, supplied in packages of three 4 oz tubes, with a unit of issue as a single package. The product must be a mild, abrasive skin prepping gel designed to remove dry surface skin and moisten the corneum layer to enhance electrical conductivity and ensure high-quality EEG tracings. The gel must have a minimum shelf life of 36 months, with no more than five months elapsed between the date of manufacture and the date of delivery to the government. All units must be sealed in protective containers that prevent damage or breakage and must be packed in commercial exterior shipping containers suitable for safe delivery by common carrier at the lowest feasible rate to the designated delivery point at Fort Bliss, Texas, with a delivery deadline of 20 days after award. Marking must comply with Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129, and copies of this standard are available through DLA Troop Support. The product is identified by NSN 6515-01-595-4854 and is subject to DLA packaging and technical requirements outlined in the DLA Master List of Technical and Quality Requirements. Bidders are required to provide their source and part number, and the solicitation, issued under SPE2DS-26-T-277Z, closed for responses on August 3, 2026, with the contract falling under NAICS code 334511 within the Department of Defense’s Medical Supply Chain.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

LASER LEVELING DEVICEThe contract specifies the procurement of a Laser Leveling Device for use with the Codman CSF External Drainage System, identified by NSN 6515-01-612-7325, with a quantity of ten units required. The device incorporates a reusable bubble level and a Class 2 laser lamp, designed to ensure precise alignment in medical settings. The unit is offered as each and must comply with technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Bidders are required to clearly state the source and part number being supplied. The solicitation number is SPE2DS-26-T-278W, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with a response deadline of August 3, 2026, and delivery expected within 84 days of award. The point of contact for inquiries is Patrick Esposito, reachable via email and phone provided in the contract data.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

CABLE, INVASIVE BLOOD PThe contract specifies the procurement of an invasive blood pressure transducer cable with a right-angle Edwards connector, intended for use with oval transducers, under the NSN 6515016150921. Each unit is to be supplied as a single item, with no tolerance for quantity variance, and must be delivered within 20 days to Travis Air Force Base in California under FOB destination terms. The product is regulated by the FDA, requiring the contracting official to refer bidder and manufacturer details to a product specialist for confirmation prior to award. All packaging must comply with the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 and MIL-STD-129, and must be marked according to Medical Marking Standard No. 1. The cable must be shipped by traceable means only; parcel post is explicitly prohibited. Bidders must provide the exact source and part number being offered, with approved supplier part numbers including MCKESSON 802437 and ZOLL 8300-0787-01. The contract includes multiple CLIN entries for the same item to facilitate separate fulfillment or tracking, all with identical delivery, inspection, and packaging criteria. The required delivery date is July 29, 2026, and the solicitation was issued under SPE2DS-26-T-278N with a response deadline of August 3, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

RESUSCITATOR, HAND OThe contract specifies the procurement of six packages of pediatric hand-operated resuscitators, each package containing six units, for a total of 36 devices. The resuscitators are AMBU bags designed for pediatric use, featuring a latex-free construction, a manometer port, a child mask, a double swivel elbow, a removable accumulator, a PEEP valve, and a 40-inch oxygen reservoir tube. These devices meet exacting technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with compliance tied to the version of the master in effect at the time of solicitation or award. Packaging must adhere to DLA procurement standards, and any non-accepted supplies must have government identification removed prior to return. The item is identified by NSN 6515-01-585-5916 with a required delivery within 20 days of award. The solicitation, issued under SPE2DS-26-T-276X by the Department of Defense’s Medical Supply Chain, is targeted for performance at Fort Bliss, Texas, and falls under NAICS code 334511 for medical equipment manufacturing.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

COVER, ELECTRONIC COThe contract pertains to the procurement of 12 units of COVER, ELECTRONIC CO with NSN 5895-01-576-1316 under solicitation SPE7M8-26-T-5626, requiring delivery within five days FOB origin to the designated receiving point at Tobyhanna Army Depot, Pennsylvania. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards, and packaging must adhere to ASTM D3951 while also meeting MIL-STD-129 marking and labeling requirements. Packaging and palletization must follow RP001 DLA Packaging Requirements, and sampling for quality verification must align with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stipulated. Attributes are to be classified with specified verification levels or AQLs, and any unspecified attributes are considered major. The unit of issue is each, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The shipment must be sent via the fastest traceable means excluding parcel post, with detailed shipping, receiving, and marking instructions provided through designated DLA codes. The required delivery date is July 27, 2026, and all technical specifications referenced in the DLA Master List take precedence over all other documents.

ELECTRICAL DEVICES DIV

POSTED

about 9 hours ago

DEADLINE

CASE, DEFIBRILLATOR-MONA molded soft carrying case designed specifically for the ZOLL PROPAQ MD defibrillator-monitor is being procured, constructed from vinyl with cushioned siding to safeguard the equipment during transport. Each unit is sold individually and must meet strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The item is subject to DLA packaging requirements and mandates the removal of government identification from any non-accepted supplies. The procurement is identified by NSN 6515-01-615-0896 with a quantity of one unit and a required delivery within 20 days of award. The solicitation, issued under contract number SPE2DS-26-T-277K, was posted on July 28, 2026, with responses due by August 3, 2026, and falls under NAICS code 334511 for medical equipment manufacturing. Performance is to be delivered to Travis AFB, California, and all bidders must clearly specify the source and part number being offered. The procurement is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with Aidan Martz listed as the primary point of contact.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

RECEIVER, COUNTERMEAThe contract prohibits the intentional addition of mercury or mercury-containing compounds to any hardware or supplies provided under this agreement, with specific exceptions for functional mercury used in batteries, fluorescent lights, required instruments, sensors or controls, weapon systems, and chemical analysis reagents explicitly approved by NAVSEA. Portable fluorescent lamps and portable instruments containing mercury must be shockproof and include a secondary containment boundary to prevent mercury leakage, in compliance with NAVSEA 5100-003D. Additional restrictions apply to preservation, packaging, packing, and marking materials, where mercury or mercury compounds are also forbidden under IP056. All packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Palletization must follow DLA packaging requirements, and shipment must be sent via the fastest traceable means, excluding parcel post, to the destination address for USS CAPE ST GEORGE CG 71 at FPO AP 96662. The item, a receiver countermeasure with NSN 586501-525-0343 and part number 237413-0001 manufactured by Marotta Controls Inc, is a critical application item requiring one unit delivered within 20 days FOB destination, with zero variance allowed in quantity. Inspection and acceptance occur at the destination. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract incorporates technical and quality requirements from the DLA Master List, with CMMC Level 2 self-assessment required, and documentation for source approval must comply with RC001. Removal of government identification from non-accepted supplies and bare item marking are governed by RQ001 and RQ017. Delivery is subject to the Department of Defense’s authorized unit of issue and transportation protocols outlined in DLAD procedural notes, with the original required delivery date set for June 5, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

RING, RETAINING, OPTICALThe contract pertains to the procurement of 42 retaining rings for optical elements, identified by part number BNG-014-A5 and NSN 5855-01-613-3011, under solicitation SPE4A7-26-T-597W. Delivery is required within 20 days of award, with shipment destined for Fort Campbell, Kentucky, under FOB origin terms and no tolerance for quantity variance. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must conform to MIL-STD-129 and DLA-specific packaging guidelines under RP001. Sampling and inspection are governed by MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 respectively, and zero non-conformances required unless explicitly waived. The item must be physically marked per RQ017 and shipped via traceable freight methods, excluding parcel post. The supplier must adhere to CMMC Level 2 self-assessment requirements, and government identification must be removed from non-accepted supplies. The contract specifies the unit of issue as PR, with a total price of $42.00, and the point of contact for inquiries is Soni Randolph of the Department of Defense. The required delivery date is July 22, 2026, though the need ship date field remains blank.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

MASK, OXYGENThis contract specifies the procurement of pediatric non-rebreathing oxygen masks, each equipped with a low-resistance check valve to prevent rebreathing and a safety vent to allow entrainment of room air, ensuring patient safety and comfort. The masks are made of clear, soft vinyl for visual assessment and patient comfort, include a 750 ml reservoir bag, and come with 7 feet of oxygen supply tubing. Each unit is packaged in quantities of fifty, with the total order requiring two packages. The item has a non-extendable shelf life of 60 months and is classified as a TYPE I (CODE S) item under applicable shelf-life requirements. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The item is subject to DLA packaging standards, requirements for removal of government identification from non-accepted supplies, and potential handling of covered defense information. All bidders must provide the source and part number being offered. The solicitation, issued under SPE2DS-26-T-277X with a response deadline of August 3, 2026, is managed by the Department of Defense’s Medical Supply Chain and requires delivery within 20 days of award.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

NEBULIZER, MEDICINALThe contract specifies the procurement of a single ultra-lightweight, battery-operated medicinal nebulizer under NSN 6515-01-614-9279, with the manufacturer part number NE-U100 supplied by BARRINGTON VENTURES LTD. The unit must be packaged in a sealed container that ensures protection from damage, with all exterior shipping containers compliant with commercial standards and capable of safe delivery at the lowest possible freight rate to the destination. Labeling and marking are strictly governed by Medical Marking Standard No. 1, which replaces MIL-STD-129, and require inclusion of the NSN, manufacturer and CAGE code, manufacture date, expiration or retest date, contract number, and lot number prefixed with “MFD” on all containers. Packaging must conform to ASTM D3951 unless superseded by higher-priority DLA technical and quality requirements, and palletization must follow RP001 guidelines. The device is FDA-regulated, requiring a referral through EBS to confirm compliance before award. Delivery is due within 20 days FOB destination to Fort Bliss, Texas, with no tolerance for quantity variance. Shipping must occur via traceable means, excluding parcel post, and includes specific military identifiers such as W8001Z and TCN W8001Z62050070 for government tracking. The required delivery date is July 29, 2026, with contract solicitation closed for response by August 3, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

More opportunities from Government of Canada → Department of Public Works and Government Services

Same awarding agency

W6898-270820-Hoist and Crane Maintenance-DND Various Locations NB and PEIThe Department of National Defence requires comprehensive maintenance, installation, repair, and certification services for cranes, hoists, hydraulic ramps, and adjustable dock ramps at multiple locations including 5 CDSB Gagetown in New Brunswick, various armouries in New Brunswick, and armouries in Prince Edward Island. This includes load testing of chains, cables, overhead hoists, and cranes, with all necessary labour, materials, tools, and equipment to be provided by the contractor. The solicitation is restricted exclusively to Canadian suppliers and suppliers from applicable trading partners. Offers must be submitted by 19:00 EDT on August 25, 2026, under solicitation number WS5803425265. Debrieﬁngs on the evaluation outcomes are available to interested offerors upon request. The contract is managed by the Government of Canada through Public Services and Procurement Canada, with Sonia Stockman serving as the primary point of contact for all inquiries.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 21 hours ago

DEADLINE

PR24440 - 6x6 Utility Terrain VehicleThe Government of Canada, through Public Works and Government Services, is seeking to procure a single 6x6 Utility Terrain Vehicle for delivery to Inuvik in the Northwest Territories under solicitation WS5776197955, which was posted on July 28, 2026, with a response deadline of August 4, 2026. This procurement is governed by the Inuvialuit Final Agreement and the Gwich’in Comprehensive Land Claim Agreement, necessitating compliance with Indigenous rights and land claim provisions. The vehicle must be capable of operating in the extreme Arctic conditions of Inuvik, and all bidders are subject to the requirements and obligations outlined under these agreements. Bidders who wish to receive feedback on their submission may request a debriefing from the Contracting Authority, Dustin Levere, within fifteen working days of receiving the bid results. Debriefings can be conducted in writing, by phone, or in person, at the bidder’s option. All communications regarding this solicitation should be directed to the designated point of contact, and the full solicitation details are accessible via the CanadaBuys portal. The requirement is classified as a federal procurement with no set-aside designation, and failure to meet deadlines or contractual obligations may result in disqualification.

POSTED

about 21 hours ago

DEADLINE

W8472-265978 - DND MARLANT Fuel Barge RFIThe Government of Canada, through the Department of National Defence with support from Public Services and Procurement Canada, is seeking industry input on the procurement of a non-self-propelled, double-hulled steel fuel barge to support the Canadian Naval Fleet Atlantic. The barge will be used to efficiently fuel naval vessels, enhancing operational readiness by enabling rapid deployment and reducing fuel waste during dry dock operations by allowing safe storage and reuse of fuel. It will be operated by civilian staff from the King’s Harbour Master fleet during daylight hours without overnight accommodations and will be moved and positioned using existing tugs, including the new Naval Large Tugs. The design and construction must comply with commercial class standards and the barge will be berthed at existing jetties. The request for information is issued under solicitation number WS5782226680 with a response deadline of August 25, 2026, and falls under NAICS code 424720 for petroleum and petroleum products merchant wholesalers. The contracting authority is Nina Caldwell of PSPC.

Petroleum and Petroleum Products Merchant Wholesalers (except Bulk Stations and Terminals)

POSTED

about 21 hours ago

DEADLINE

RFI for Space Command and ControlThe Government of Canada, through the Department of Public Works and Government Services, has issued a Request for Information for Space Command and Control under solicitation number WS5806325873, posted on July 28, 2026, with a response deadline of September 4, 2026. This solicitation is aimed at gathering input from industry participants to inform future procurement activities related to space command and control capabilities, and is open to all qualified respondents without any set-aside specifications. The place of performance is designated as Canada, and all responses must be submitted to the contracting authority, Daniel Ferguson, via the provided email address. The initiative seeks to assess market capabilities and technological advancements relevant to space-based operations, supporting national security and operational efficiency in the space domain. Though no NAICS code or detailed contract type is specified, the organization type is confirmed as federal, indicating this is a government-led effort with potential for subsequent competitive procurement. Interested parties are directed to the official online portal for the full solicitation document and additional submission guidelines, and all communication should be directed to the primary point of contact listed in the notice.

Space Research and Technology

POSTED

about 21 hours ago

DEADLINE

in about 1 month

EF944-270442 - PSIB - Purchase of office furniture under the SA for category 6 for ESDCPublic Works and Government Services Canada, acting on behalf of Employment and Social Development Canada, is soliciting bids for the purchase, delivery, and installation of office furniture under supply arrangement E60PQ-140003/D in Montreal, Quebec. The solicitation, identified as EF944-270442 and numbered WS5799420242, was posted on July 28, 2026, with responses due by August 4, 2026, at 7:00 p.m. Eastern Time. The procurement falls under NAICS code 337127, which pertains to office furniture manufacturing, and is open to federal suppliers without set-aside restrictions. All work must be performed in Montreal, and the contracting authority is Corine Lavoie of Public Services and Procurement Canada, reachable via email at corine.lavoie@tpsgc-pwgsc.gc.ca. The opportunity is accessible through the Canada Buys portal for complete tender documentation.

Institutional Furniture Manufacturing

POSTED

about 21 hours ago

DEADLINE

Laboratory Analytical Gravity Separator - Superpanner TableThe Government of Canada, through the Department of Public Works and Government Services, is soliciting a laboratory analytical gravity separator, commonly referred to as a superpanner or analytical table, designed for the wet gravity separation of small, prepared samples of minerals, slag, oxides, and rock-derived materials. This equipment is essential for precise laboratory analysis and must meet specific technical requirements to ensure accurate particle separation based on density differences. The solicitation, identified as WS5788457554, was posted on July 28, 2026, with a response deadline of August 24, 2026, at 7:00 PM Eastern Time. Proposals must be submitted in accordance with the issued specifications to be considered eligible. The contract is targeted for performance within the National Capital Region (NCR), and the sole point of contact for all inquiries is Stephanie Way, Contracting Authority, reachable via email at stephanie.way@tpsgc-pwgsc.gc.ca. There is no set-aside designation indicated for this solicitation, meaning it is open to all qualified vendors regardless of business size or status. The procurement is classified as a federal requirement under the agency’s ongoing commitment to maintaining advanced analytical capabilities, and interested parties are directed to the official Canada Buys portal for full tender details and submission guidelines.

Analytical Laboratory Instrument Manufacturing

POSTED

about 21 hours ago

DEADLINE

EC015-270278 - Basin Dredging Escuminac New BrunswickThe contract involves floating plant harbour dredging operations at Escuminac Wharf in Kent County, New Brunswick, with all dredged material disposed of into an on-site containment cell using a barge-mounted excavator and scow. The scope of work includes establishing and managing access to the containment cell, overseeing dredging activities within the cell, and handling dewatering processes throughout the operation. Additionally, the contractor is responsible for the complete removal and reinstallation of floating wharves and associated appurtenances, along with all related site works and restorations necessary to return the area to its required condition. All activities are to be executed with strict attention to environmental and operational protocols at the designated location. This solicitation, identified as EC015-270278 under reference WS5776322857, is issued by the Department of Public Works and Government Services on behalf of the Government of Canada, with a NAICS code of 237990. The opportunity was posted on July 28, 2026, and responses are due by August 13, 2026, at 7:00 PM. Inquiries must be directed exclusively to Dylon Leonard, Contracting Authority, at dylon.leonard@tpsgc-pwgsc.gc.ca. The place of performance is clearly defined as Escuminac, New Brunswick, and the procurement is classified as a federal tender with no specified set-aside. All details and documentation are accessible via the CanadaBuys platform.

Other Heavy and Civil Engineering Construction

POSTED

about 21 hours ago

DEADLINE

EA003-270538 ITQ - Caulking and Flashing - NAFCThis contract, titled EA003-270538 ITQ - Caulking and Flashing - NAFC, is the first phase of a two-stage procurement process under solicitation number WS5810721200, issued by the Government of Canada through the Department of Public Works and Government Services. The initial phase is a prequalification solicitation aimed at evaluating the capabilities and qualifications of interested suppliers, with only those who successfully pass this stage being invited to submit financial bids in Phase Two based on detailed specifications and drawings. The prequalification list is valid for only 60 days or until a contract is awarded in Phase Two, whichever occurs first, and will not be reused for any other procurement. The work involves the removal and replacement of sealant at the exterior precast concrete panels, windows, and curtain wall perimeters of specific building modules at the Northwest Atlantic Fisheries Centre in St. John’s, Newfoundland and Labrador, a Classified Federal Heritage Building, requiring strict adherence to preservation standards to avoid irreversible damage. Any accidental damage must be reported immediately to the Departmental Representative. The contract is subject to the Canadian Free Trade Agreement and does not involve limited tendering under any exceptions. The response deadline for submissions is August 13, 2026, and all interested parties must respond by this date to be considered. The primary point of contact for inquiries is Richard Parsons, Contracting Authority, reachable via email at richard.parsons@tpsgc-pwgsc.gc.ca. While businesses may express interest in partnering with others, such partnerships do not alter the competitive bidding process or guarantee inclusion in the prequalification list, and all participants remain subject to full competition based on established criteria. The project location and heritage status of the facility necessitate heightened attention to architectural integrity and compliance with federal heritage preservation protocols throughout execution.

Other Foundation, Structure, and Building Exterior Contractors

POSTED

about 21 hours ago

DEADLINE

Managed Web Service for Canada.caThe solicitation seeks a Managed Web Service solution to support Canada.ca under solicitation number WS5765538034, issued by the Department of Public Works and Government Services on behalf of the Government of Canada. All bid submissions and required supporting documentation must be received by 1400h EDT on August 7, 2026; any submissions received after this time will be deemed non-responsive, regardless of the originally posted deadline in the Ariba Discovery posting. The contract falls under NAICS code 518210 and is intended for performance within Canada’s National Capital Region. The primary point of contact for inquiries is Bronwyn Knight2, Contracting Authority, reachable via email at bronwyn.knight2@tpsgc-pwgsc.gc.ca. The solicitation was posted on July 28, 2026, and is classified as a federal procurement opportunity with no set-aside designation.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

about 21 hours ago

DEADLINE

W8472-225864 Dive Tender Replacement Project RFICanada, through the Department of National Defence and with support from Public Services and Procurement Canada, is seeking industry input on the Dive Tender Replacement project to modernize its fleet of underwater support vessels. The initiative aims to replace the aging Granby and Sechelt-class vessels currently used by the Royal Canadian Navy to enable critical diving operations for naval missions and public safety. The new vessels are expected to be traditional 24-crew diving support ships, designed to fully replicate and enhance the current fleet’s capabilities. This request for information falls under Pillar 2 of the National Shipbuilding Strategy, which focuses on small vessel construction, and may be subject to bidding restrictions that prioritize shipyards selected under Pillar 1. The solicitation, issued under reference WS5654653921, was posted on July 28, 2026, with responses due by August 11, 2026. Industry participants are directed to review Annex A for detailed operational requirements and must submit feedback through the designated portal. Point of contact for inquiries is Nina Caldwell of PSPC, available via email for guidance on submission protocols.

Ship Building and Repairing

POSTED

about 21 hours ago

DEADLINE

W0123-24CM01B Digital Television ServiceThe contract titled W0123-24CM01B Digital Television Service is a federal solicitation issued by the Department of Public Works and Government Services under the Government of Canada, targeting providers of digital television services. The solicitation number is WS5547843540, posted on July 28, 2026, with a response deadline of August 25, 2026, at 7:00 PM. The North American Industry Classification System code 516120 indicates the requirement falls under television broadcasting services. Performance of the contract is expected to take place in Newfoundland and Labrador, with no specific city or postal code designated. The primary point of contact for inquiries is Genevieve Petten, Contracting Authority, reachable via email at genevieve.petten@tpsgc-pwgsc.gc.ca. This is a federal procurement opportunity with no specified set-aside status for small businesses or other categories, open to all qualified respondents meeting the technical and contractual requirements outlined in the full solicitation document.

Television Broadcasting Stations

POSTED

about 21 hours ago

DEADLINE

EC015-270056 - (Indigenous Set-Aside ) Snow Removal and Winter maintenance - JC Van Horne BridgeThe contract under solicitation number WS5810721272 is an Indigenous set-aside tender for snow removal and winter maintenance services on the JC Van Horne Bridge in New Brunswick, exclusively open to Indigenous suppliers and eligible trading partner nations under Canada’s Procurement Strategy for Indigenous Business. The scope of work includes sidewalk snow and ice removal, related winter maintenance activities, and traffic control measures required by provincial legislation or regulations to ensure public safety during winter conditions. Bids must be submitted by the deadline of August 20, 2026, at 7:00 PM, with the opportunity posted on July 28, 2026. The contracting authority is Chantal Blanchard of Public Works and Procurement Canada, who can be contacted at chantal.blanchard@tpsgc-pwgsc.gc.ca for inquiries or debriefing requests. Successful bidders will be obligated to perform services in accordance with federal and provincial standards, and unsuccessful bidders may request a debriefing within 15 working days of being notified of their bid outcome.

Highway, Street, and Bridge Construction

POSTED

about 21 hours ago

DEADLINE