Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Ball Bearing Manufacturing and Supply

Active

Federal

Response Deadline07/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the manufacture and supply of 66 precision Ball Annular Bearings with Part Number 335544, strictly adhering to military-grade specifications and quality standards required by DLA Aviation. These components are critical to aerospace systems and must meet rigorous performance, durability, and reliability benchmarks defined by Department of Defense requirements. The work is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with zip code 17070-5002, ensuring compliance with all logistical and operational constraints tied to defense applications. This subcontract, posted on July 16, 2026, requires proposals to be submitted by July 24, 2026, under the NAICS code 332998 for other fabricated metal product manufacturing. The contracting activity falls under the ASC Commodities Division of the Department of Defense, indicating the bearings are intended for direct integration into military aviation platforms. All submitted offerings must demonstrate proven capability in high-precision bearing production, full traceability of materials, alignment with relevant military specifications, and readiness to support sustained defense operations without deviation from established technical and quality protocols.

General Info

Supply 66 military-grade ball annular bearings to DLA Aviation in Pennsylvania by July 24, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332998 - Enameled Iron and Metal Sanitary Ware ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Response DeadlineJul 24

Submission deadline

Response Deadline

07/24/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of 66 units of Ball Annular Bearings, Part Number 335544, meeting military-grade specifications and quality standards for DLA Aviation.

Similar Contracts

Same NAICS industry code

Supply of Industrial Gasket per Military SpecificationThe contract calls for the supply of one specific industrial gasket identified by NSN 5330-01-548-5896, with a total quantity requirement of eight units. All items must comply with military packaging and labeling standards to ensure proper handling, storage, and deployment within defense logistics systems. The solicitation is structured as a subcontract under the NAICS code 332998, indicating it pertains to other fabricated metal product manufacturing. The offering entity is the Electrical Devices Division within the Department of Defense, and performance is required at the designated location in Chambersburg, Pennsylvania, with zip code 17201-4150. The opportunity was posted on July 16, 2026, with responses due by July 27, 2026, allowing potential vendors a defined window to submit proposals. All submissions must align with the technical and compliance requirements established by the military specification for this gasket type.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Precision Machining and Assembly of Rotor ComponentsThe contract entails the manufacturing, precision machining, and final assembly of defense rotor assemblies to stringent military specifications, requiring full compliance with quality control standards, rigorous testing protocols, and comprehensive documentation throughout the production lifecycle. The work involves high-precision components critical to defense systems, demanding advanced technical capabilities, certified processes, and adherence to defense industry benchmarks to ensure performance and reliability under operational conditions. Production is to be performed at the designated facility in New Cumberland, Pennsylvania, with the entire scope governed by strict regulatory and contractual obligations. This is a subcontract opportunity under NAICS code 332998, issued by the Department of Defense through LAND SUPPLIER OPNS ENGINES with a response deadline of July 27, 2026. All submissions must meet the technical, logistical, and compliance requirements outlined in the solicitation, with no set-aside classification specified. The contract emphasizes end-to-end accountability, from raw material processing through final assembly and acceptance testing, with quality assurance and traceability integral to every phase. The solicitation link provides access to full requirements, and proposers are expected to demonstrate proven experience in defense rotor component production along with the infrastructure to support secure, on-time delivery.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Precision Bearing SupplyThe contract pertains to the supply of thru-type washer bearings identified by NSN 3120015249571, with all items required to meet strict military specifications and quality standards. The solicitation, titled Precision Bearing Supply, is issued as a subcontract under the NAICS code 332998 and is managed by the ASC COMMODITIES DIVISION of the Department of Defense. The place of performance is designated as Tracy, California, with a zip code of 95304-5000, indicating where the delivered goods must be shipped and accepted. The opportunity was posted on July 16, 2026, and responses are due by July 24, 2026, leaving a narrow window for potential suppliers to submit proposals. The contract is accessible through the DIBBS portal, and while no specific point of contact or set-aside classification is provided, compliance with military-grade requirements and timely delivery are critical to meeting the obligations of this procurement.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

O-Ring Supply and DeliveryThe contract mandates the supply and delivery of a single NSN-compliant O-ring, identified by NSN 5331015786961 and part number 2385080, to a military destination no later than July 27, 2026. Delivery must be made FOB destination, meaning the seller assumes all responsibility and risk until the item reaches the specified military location. Inspection of the O-ring is to occur at the delivery point, ensuring compliance with specifications prior to acceptance. The contract is classified as a subcontract under NAICS code 332998 and is administered by the Defense Logistics Agency within the Department of Defense. The posting date is listed as July 16, 2026, indicating this requirement was issued shortly before the delivery deadline, requiring prompt action from the supplier. The contract does not include a solicitation number or set-aside designation, and no specific point of contact or office address details are provided beyond the agency's general oversight.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Retaining Clamp Block (NSN 5340015062723)The contract calls for the procurement and delivery of five units of a retaining clamp block identified by NSN 5340015062723, ensuring full compliance with federal and military specifications. All items must adhere to stringent requirements regarding hazardous materials labeling and shipment marking standards to meet Department of Defense regulatory criteria. The effort is classified as a subcontract under NAICS code 332998 and is managed by the Land Supply Chain within the Department of Defense. Performance of the work is designated for New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 16, 2026, and responses are due by July 27, 2026, with no set-aside provisions specified. The contract is accessible via the DIBBS platform for further details.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Clevis, Rod End Component SupplyThe contract requires the supply of five units of a Clevis, Rod End identified by NSN 5340013213779, manufactured to meet military specifications with full compliance in all aspects including packaging, labeling, and inspection criteria. The delivery is specified as FOB Origin, meaning the vendor is responsible for preparing and loading the items at their facility, with ownership and risk transferring to the buyer upon shipment. The final destination is New Cumberland, Pennsylvania, with the ZIP code 17070-5002 designated as the place of performance. The solicitation falls under the NAICS code 332998 for other fabricated metal product manufacturing and is classified as a subcontract within the Aviation Supply Chain division of the Department of Defense. The opportunity was posted on July 16, 2026, with responses due by July 24, 2026, and interested parties must submit through the DIBBS platform using the provided solicitation link.

AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Precision Bearing Collar Manufacturing and SupplyThe contract requires the manufacture and delivery of 205 precision bearing collars identified by NSN 3110017342811, part number HS700575, under Technical Data Package Revision A, ensuring full compliance with Department of Defense technical specifications and DLA packaging standard RP001. All units must be shipped FOB Origin, with the place of performance located in New Cumberland, Pennsylvania, under the oversight of the ASC Commodities Division within the Department of Defense. The solicitation is structured as a subcontract and is exclusively reserved for small businesses under a Total Small Business Set-Aside as defined by FAR 19.5, with the NAICS code 332998 designating it within the Other Miscellaneous Fabricated Metal Product Manufacturing category. The opportunity was posted on July 16, 2026, and responses are due by July 24, 2026, providing a limited window for qualified small business vendors to submit proposals. The contract is administered through the Defense Logistics Agency's procurement portal, with the official solicitation accessible via the provided DIBBS link. While specific point of contact details are not listed, all technical, packaging, and delivery requirements must be met without exception to satisfy the terms of the solicitation and achieve contract award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Retainer, Nut and Bolt (NSN 5340-01-131-7100)The contract entails the supply and delivery of ten units of Retainer, Nut and Bolt identified by part number 2552-02RET and national stock number 5340-01-131-7100, manufactured by a vendor with CAGE code 80539. All items must comply strictly with military packaging, labeling, and traceability requirements to ensure full adherence to Department of Defense standards. This subcontract falls under NAICS code 332998, indicating specialized manufacturing activities not elsewhere classified, and is managed by the Defense Logistics Agency under the broader purview of the Department of Defense. The solicitation was posted on July 16, 2026, with performance logistics and delivery governed by defense supply protocols, though specific delivery locations and point of contact details are not provided in the available data. The contract is accessible through the DIBBS system via the reference number SPE7L126P9123.

Defense Logistics Agency

POSTED

DEADLINE

Cotter Pin Supply and DeliveryA cotter pin with NSN 5315013203517 and part number 1J2919 is to be supplied and delivered to Fort Hood, Texas, no later than July 22, 2026, under a DPAS-rated order that ensures priority handling in accordance with defense logistics requirements. The item must fully comply with all applicable federal and defense logistics standards to ensure operational readiness and compatibility with military equipment. The contract is classified as a subcontract issued by the Defense Logistics Agency under the Department of Defense, with a NAICS code of 332998 indicating it falls under miscellaneous fabricated metal product manufacturing. Delivery is mandated to meet strict defense supply chain protocols, and the order remains active until fulfillment, with performance tracked through the Defense Logistics Agency’s procurement system.

Defense Logistics Agency

POSTED

DEADLINE

Chute Assembly Manufacturing – Ammunition Handling SystemThe contract calls for the manufacture and delivery of two specialized chute assemblies designed for use in ammunition handling systems, encompassing full lifecycle support from engineering and fabrication through quality control, packaging, and final delivery. All work must adhere strictly to military standards to ensure compatibility, durability, and safety in operational environments. The deliverables include not only the physical units but also the associated documentation and processes required to meet defense-grade specifications. The place of performance is established at NEW CUMBERLAND with a ZIP code of 17070-5002, and the assemblies must be shipped to a DLA freight location as specified in the requirements. The solicitation is categorized as a subcontract under NAICS code 332998, which pertains to other fabricated metal product manufacturing, and is issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. The response deadline is set for July 27, 2026, with the solicitation posted on July 16, 2026, providing a minimum eleven-day window for Interested parties to prepare and submit proposals. The contract does not specify a set-aside designation, meaning it is open to all eligible subcontractors regardless of business size or category. Participation requires full compliance with defense logistics standards and successful navigation of the DIBBS platform using the provided RFQ link.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Cotter Pin Supply (PIN, COTTER)The contract seeks the supply of one hundred units of a PIN, COTTER with the National Stock Number 5315015172310, requiring full compliance with military specifications for quality, performance, and durability. The items must be properly packaged and labeled according to military standards to ensure suitability for defense use and logistics handling. Delivery is mandated to be completed at Fort Riley, Kansas, with the designated zip code 66442-5936 serving as the definitive point of performance. The solicitation is classified as a subcontract under the NAICS code 332998, indicating it falls under other miscellaneous manufacturing. The opportunity was posted on July 16, 2026, with a response deadline of July 24, 2026, and is managed by the Aviation Supply Chain ESOC Buys office within the Department of Defense. All submissions must adhere to the requirements outlined in the solicitation and be submitted via the provided DIBBS portal link to be considered.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Ball Socket Seat SupplyThe contract calls for the supply of two ball socket seats identified by NATO Stock Number 1290005132037, with all units required to comply with military specifications to ensure compatibility and performance in defense applications. The procurement is classified as a subcontract under the NAICS code 332998, indicating it falls within other fabricated metal product manufacturing, and is being managed by the Maritime Supply Chain under the Department of Defense. The solicitation was posted on July 16, 2026, with responses due by July 27, 2026, providing a ten-day window for qualified vendors to submit proposals. No specific set-aside designation or location details for performance or agency office are provided, but the official reference link directs to the DIBBS platform where full solicitation documents can be accessed.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Government First Article Inspection and TestingThe contract requires the performance of a first article inspection and testing on an aircraft structural fitting to ensure full compliance with drawing 7574876. This includes detailed dimensional measurements, verification of material specifications, non-destructive testing, and the preparation of a formal inspection report. All work must demonstrate adherence to the technical requirements outlined in the drawing and meet applicable quality standards for aerospace components. The effort is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses can bid, and it is classified under NAICS code 541330, which pertains to engineering services. The solicitation was posted by the ASC Commodities Division of the Department of Defense and is open for response until July 27, 2026, with no specific location provided for performance.

Engineering Services

POSTED

about 15 hours ago

DEADLINE

Precision Manufacturing of Aircraft Structural FittingThe contract involves the precision manufacture of a critical safety aircraft structural fitting identified by Part Number S03-02-R-100, following the specifications outlined in drawing 7574876. The scope encompasses full production lifecycle activities including material sourcing, machining, heat treatment, and surface finishing, all required to meet stringent aerospace industry standards for structural integrity, durability, and safety compliance. All work must be performed in accordance with applicable aerospace quality and inspection protocols to ensure the component meets mission-critical performance requirements. This is a total small business set-aside under the SBA program as defined by FAR 19.5, with the NAICS code 332312 classifying it under forge and stamping manufacturing. The contract is issued under the Department of Defense’s ASC Commodities Division and is structured as a subcontract. Proposals must be submitted by the deadline of July 27, 2026, with the solicitation published on July 17, 2026. All manufacturing activities are expected to adhere to defense supply chain requirements, and the place of performance is not specified, implying flexibility as long as compliance and delivery obligations are met.

Fabricated Structural Metal Manufacturing

POSTED

about 15 hours ago

DEADLINE

Quality Assurance and Inspection at OriginThe contract titled Quality Assurance and Inspection at Origin requires the contractor to perform inspection and acceptance of supplies at the point of production or packaging, in strict adherence to contract clause 52.246-9008. This work is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to participate as defined by the SBA and FAR 19.5. The NAICS code 541330 identifies the scope as ranging within architectural, engineering, and related services, indicating the nature of the quality assurance activities involves technical oversight and compliance evaluation rather than direct manufacturing. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026, and is managed by the ASC Commodities Division within the Department of Defense, though specific point of contact and place of performance details are not provided. The contract emphasizes the importance of ensuring supplies meet required standards prior to shipment, with inspections conducted directly at the origin, which may include facilities across various locations. Compliance with the referenced clause mandates adherence to federal procurement quality assurance procedures, requiring detailed documentation, evaluation criteria, and acceptance protocols to be followed during inspection. The absence of explicit location or contact information suggests the contractor must be prepared to perform at any production or packaging site tied to the supply chain, and the lack of defined city or state for performance implies a potentially nationwide scope requiring logistical flexibility and readiness to deploy inspection personnel as needed. The contract is accessible through the DIBBS portal for further procedural details.

Engineering Services

POSTED

about 15 hours ago

DEADLINE

ITAR/EAR Compliance and Export-Controlled Data HandlingThe contract mandates strict compliance with ITAR and EAR regulations for all suppliers and subcontractors handling export-controlled technical data, ensuring that only authorized entities with proper registration and documentation are engaged in work involving sensitive information. All parties must demonstrate adherence to U.S. export control laws as a condition of participation, with failure to comply potentially resulting in termination or penalties. The solicitation is designated as a Total Small Business Set-Aside under the SBA program, restricting eligibility to small businesses as defined by the NAICS code 541611, which pertains to management consulting services. The award is issued by the ASC Commodities Division under the Department of Defense, with responses due by July 27, 2026, and performance expected to occur under the terms of a subcontract agreement. Participation requires proactive verification of regulatory standing and ongoing compliance monitoring for the duration of the contract.

Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

Subcontracting Plan Compliance and Small Business OutreachThe contract requires the development and execution of a federal subcontracting plan designed to ensure compliance with Department of Defense regulations and Small Business Administration guidelines for maximizing participation by disadvantaged, minority, and women-owned businesses. The goal is to meet specific targets for DBE, MBE, and WBE subcontracting as mandated by the Federal Acquisition Regulation and SBA rules, with all activities aligned to a total small business set-aside under FAR 19.5. The work focuses on strategic outreach, monitoring, documentation, and reporting to demonstrate consistent adherence to small business utilization standards throughout the contract performance period. The solicitation, issued under NAICS code 541611 for management consulting services, is administered by the ASC Commodities Division within the Department of Defense and is open for response through July 27, 2026. All subcontracting efforts must be structured to promote equitable access and measurable outcomes for certified small, minority, and women-owned businesses, with full transparency and accountability required in tracking participation. The successful contractor will be responsible for designing, implementing, and sustaining a comprehensive subcontracting strategy that aligns with federal obligations and supports the agency's commitment to small business procurement goals.

Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

Critical Safety Item (CSI) Manufacturing and SupplyThe contract involves the manufacture and delivery of Critical Safety Items specified by the U.S. Navy, with stringent requirements for sourcing controls, component traceability, and full compliance with defense-specific technical and quality standards. These items are essential to mission-critical systems and must be produced under strict regulatory oversight to ensure reliability and safety throughout their lifecycle. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, and the NAICS code 332999 indicates the work falls under other fabricated metal product manufacturing. All production and delivery activities must adhere to military specifications, and suppliers are expected to implement robust documentation and audit-ready tracking systems for every component and process step. The solicitation was posted on July 17, 2026, with a deadline for responses on July 27, 2026, and is managed by the ASC Commodities Division under the Department of Defense. There is no specified place of performance, suggesting flexibility in manufacturing locations provided all requirements are met, and no point of contact is listed, implying inquiries must be directed through the official DIBBS portal referenced in the link. The nature of the work demands a high level of precision and accountability, with failure to meet traceability or compliance standards likely resulting in disqualification or contract termination. Suppliers must be prepared to demonstrate proven capability in handling sensitive defense components and maintaining data integrity across the supply chain.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

Quality Inspection and Product Verification TestingThe contract requires the performance of in-process and final inspections on bushing assemblies in accordance with MIL-STD-1916 or ASQ H1331 standards, ensuring compliance with rigorous quality and verification protocols. The contractor is responsible for generating accurate test reports and providing full support to Government acceptance activities, demonstrating consistent adherence to defense-grade quality requirements throughout the production lifecycle. This work is critical to validating the integrity and functionality of components used in defense systems. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 541330, and issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026. While specific location details are not provided, the place of performance is tied to defense operations under the DLA umbrella, and all submissions must be made through the designated DIBBS portal. The contract emphasizes the need for qualified small business entities capable of delivering precise inspection services under strict military specifications.

Engineering Services

POSTED

about 15 hours ago

DEADLINE

Domestic and International Freight Logistics (U.S.-Flag Vessel Compliance)The contract requires the arrangement of domestic and international freight logistics for the shipment of bushing assemblies to locations within the continental United States, with strict adherence to U.S.-flag vessel requirements mandated by the Cargo Preference Act for all ocean freight portions. This ensures compliance with federal regulations that prioritize the use of American-owned and flagged vessels for the transportation of government cargo. The solicitation is structured as a subcontract under a Total Small Business Set-Aside designation, exclusively available to small businesses certified by the Small Business Administration, and is classified under NAICS code 483112, which pertains to foreign ocean transportation. The opportunity was posted on July 17, 2026, with a response deadline of July 27, 2026, and is overseen by the ASC Commodities Division of the Department of Defense, with performance tied to U.S. domestic destinations. The requirement emphasizes logistical precision, regulatory compliance, and small business participation in fulfilling defense-related supply chain needs.

Deep Sea Passenger Transportation

POSTED

about 15 hours ago

DEADLINE

Supply Chain Traceability and Documentation ManagementThe contract requires the maintenance of fully auditable records to ensure complete traceability of material origin, certifications, inspections, and adherence to all Government traceability mandates, specifically in compliance with DFARS requirements. All documentation must support transparency and accountability throughout the supply chain, enabling verification of source materials and compliance with defense contracting standards. The contractor must implement systems and procedures capable of sustaining rigorous audit readiness and meeting every contractual obligation related to documentation integrity and regulatory compliance. This is a small business total set-aside subcontract under NAICS code 541611, issued by the Department of Defense’s ASC Commodities Division. Responses are due by July 27, 2026, and performance is expected to align with federal defense supply chain protocols. The contract emphasizes strict adherence to traceability standards and requires proven capability in managing complex documentation systems under federal oversight. While specific location details are not provided, all work must satisfy DoD requirements for origin verification and material accountability.

Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

Packaging, Marking, and Labeling ServicesThe contract seeks qualified small businesses to provide military-compliant packaging, preservation, and labeling services for bushing assemblies, adhering strictly to DLA and MIL-STD-129 standards. Essential requirements include accurate barcode application, application of special handling labels, and full compliance with defense logistics protocols to ensure traceability, durability, and readiness for military distribution. The work must be performed in accordance with federal regulations governing packaging integrity and labeling accuracy to support the Department of Defense’s supply chain standards. This is a total small business set-aside under NAICS code 493190, restricted exclusively to small businesses as defined by the SBA, and is issued as a subcontract by the ASC Commodities Division within the Department of Defense. Responses are due by July 27, 2026, with the solicitation posted on July 17, 2026, and all work expected to align with DLA’s logistical demands for defense components. The place of performance and point of contact details are not specified, but all proposals must demonstrate readiness to meet stringent military packaging and documentation requirements without deviation.

Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

Precision Machining of Bushing Assembly (NSN 5365-01-541-2220)The contract pertains to the manufacture and delivery of precision bushing assemblies identified by NSN 5365-01-541-2220, requiring strict adherence to military specifications throughout production. Work includes CNC machining to exact tolerances, comprehensive inspection processes, and full compliance with traceability and packaging standards mandated for defense applications. The contract is structured as a subcontract under a total small business set-aside, reserved exclusively for small businesses as defined by the SBA under FAR 19.5, with the NAICS code 332710 applicable to forged and stamped metal product manufacturing. The opportunity was posted on July 17, 2026, with responses due by July 27, 2026, and is issued by the ASC Commodities Division under the Department of Defense. Performance is expected to occur at an undefined location, and all deliverables must meet federal defense supply chain requirements, ensuring readiness for military use.

POSTED

about 15 hours ago

DEADLINE

Small Business and DBE/MBE/WBE Subcontracting ParticipationThis contract opportunity is designed to facilitate participation by small, disadvantaged, minority-owned, and women-owned businesses in supply or compliance roles under a prime contract managed by the ASC Commodities Division within the Department of Defense. The solicitation, identified by the NAICS code 335931, focuses on subcontracting engagement and does not specify a set-aside type, meaning it is open to qualified entities meeting ownership and size criteria without formal classification under a specific program. Interested businesses must respond by the deadline of August 16, 2026, to be considered for inclusion in the workforce supporting the prime contract's delivery and compliance requirements. The work will be performed without a specified geographic location, indicating potential flexibility in performance sites. Participation is facilitated through the DIBBS platform, where full details and submission protocols can be accessed.

Current-Carrying Wiring Device Manufacturing

POSTED

about 15 hours ago

DEADLINE