Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Bearing and Mechanical Component Supply

Active

Federal

Response Deadline08/18/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Precision Bearing and Mechanical Component Supply, is issued by the Department of Homeland Security through the Sflc Procurement Branch 1. The contract focuses on the procurement of high-precision individual components, including radial ball bearings, spherical roller bearings, taper roller bearings, oil seals, grease fittings, and shim kits, which are intended for use in overhaul kits. The opportunity is designated as an 8(a) Sole Source set-aside under FAR 19.8, with the associated NAICS code 332996. Performance of the contract will take place in Curtis Bay, Maryland. The solicitation was posted on August 13, 2026, with a response deadline of August 18, 2026.

General Info

DHS 8(a) sole source contract for precision bearings and components in Curtis Bay.

Agency

Department Of Homeland Security → Sflc Procurement Branch 1(00080)View Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

Curtis Bay, MD, 21226, USA

Set-Aside

8A

Documents

This scope was carved out of 70Z08026Q20902B00.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PARTS KIT, HOIST

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 13

subcontract

Response DeadlineAug 18

Submission deadline

Response Deadline

08/18/2026, 02:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → Sflc Procurement Branch 1(00080)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Homeland Security → Sflc Procurement Branch 1(00080)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of high-precision individual components including spherical roller bearings, radial ball bearings, taper roller bearings, oil seals, shim kits, and grease fittings for inclusion in overhaul kits.

Similar Contracts

Same NAICS industry code

LH STA 379 REPAIR FITT

Solicitation # SPEFA3-26-Q-0056

This contract is a firm fixed price solicitation for the procurement of seven LH STA 379 Repair Fittings, identified by NSN 1560-LN0035450 and Sikorsky Aircraft Corporation part number 22E2981-1. The items are designated as critical application items and do not have a shelf life requirement. Delivery is required within 30 days after order receipt, with both inspection and acceptance occurring at the destination. The agreement adheres to DLA master technical and quality requirements, specifically referencing packaging standards RP001 and ASTM D3951, and marking standards MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331. Item Unique Identification is not required for this order. Shipping is directed to the Fleet Readiness Center Southeast in Jacksonville, Florida.

DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE7M3-26-T-8244

This contract is for the procurement of 28 aluminum alloy hose clamps with a 3.563 inch inner diameter, identified by NSN 4730-01-070-7965 and part numbers DEA-02287 and C9557-1. The items are designated as critical application items and must adhere to specific technical drawings and quality standards, with a strict prohibition on porosity and surface defects around bolt holes. Delivery is required within 256 days, with a need ship date of May 8, 2027, to the DLA Distribution facility in New Cumberland, Pennsylvania. Quality assurance is stringent, requiring DCMA inspection and acceptance at the origin. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, and the use of Class I ozone-depleting chemicals is strictly prohibited. The contract incorporates the DLA Master List of Technical and Quality Requirements and specifies a zero percent quantity variance.

FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE7M3-26-T-8240

This contract is for the procurement of 42 units of CRES material pipe nipples, measuring 1.00 inch at all ends, conforming to SAE J514-3 standards for hydraulic tube fittings. The order is identified by NSN 4730-01-540-5369 and part number 16-16 140137SA. Delivery is required within 218 days, with a final need date of March 31, 2027, shipped FOB Origin to DLA Distribution Anniston in Alabama. The supplier must adhere to strict quality and technical requirements, including DLA packaging standards, MIL-STD-129 labeling, and ASTM D3951 packaging. Sampling and inspection will be conducted at the destination according to MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the use of Class I ozone depleting chemicals in the production or delivery of the items.

FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

COUPLING HALF, QUICK

Solicitation # SPE7M1-26-T-282B

This solicitation is for the procurement of 32 units of Quick Half Couplings (NSN 4730-01-292-2165) for the Maritime Supply Chain under the Department of Defense. The delivery requirement is 56 days after the order is placed. Offerors are encouraged to provide quantity ranges in their quotes to allow for flexibility in requirements and are advised to submit a No Bid quote if they intend to bid after the closing date to keep the buyer informed. Compliance requirements include adhering to domestic material restrictions such as the Berry Amendment and the Buy American Act, and certifying that no covered telecommunications equipment or services will be provided. Additionally, contractors must register via the Account Management and Provisioning System to maintain access to the Vendor Shipment Module. Additive manufacturing is prohibited unless specifically authorized, and small business joint ventures must provide specific representations and certifications.

MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

ELBOW, TUBE TO HOSE

Solicitation # SPE7M1-26-T-281Y

This contract is for the procurement of 19 units of a tube to hose elbow, identified by NSN 4730-00-064-2657 and part number MS28781-10. The item is a critical application commercial steel fitting featuring a 90 degree angle, a 5/8 inch tube size female swivel nut with a 37 degree flare seat, and a 9/16 inch ID hose socket for aircraft applications. Production must adhere to Class 3 threads and specifications MS28781E and MIL-DTL-8789G, and the supplier must be listed on the applicable Qualified Products List or Qualified Manufacturers List. The agreement mandates strict compliance with DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, and prohibits the use of Class I ozone depleting chemicals. Delivery is required within 56 days, with a need ship date of October 20, 2026, and a final required delivery date of February 24, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania.

MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

TUBE ASSEMBLY, METAL

Solicitation # SPE7M4-26-T-336X

This solicitation from the Department of Defense Fluid Handling Division is for the procurement of one metal tube assembly with a 0.375 inch outer diameter and 0.035 inch wall thickness. Identified by NSN 4710-01-190-3879, the item must be delivered within 20 days after receipt of the order. The solicitation, numbered SPE7M4-26-T-336X, was posted on August 13, 2026, with a response deadline of August 24, 2026. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with this assembly is subject to ITAR or EAR restrictions and cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Department of Commerce. To access this data, contractors must possess an approved US/Canada Joint Certification Program certification and complete the required Department of Defense training and questionnaires.

FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE7M3-26-T-8245

This contract, identified as solicitation SPE7M3-26-T-8245, is for the procurement of six 90-degree pipe elbows with a 1-1/2 inch nominal pipe size and socket-weld ends. The components must be manufactured from 70/30 copper-nickel material. The delivery requirement is set for 428 days after the order is placed, and the items do not have a shelf life requirement. The supplier is required to adhere to DLA packaging and technical quality standards, including the removal of government identification from non-accepted supplies and specific configuration change management protocols. A critical requirement is the provision of a Certificate of Quality Compliance for each manufacturing lot, which must be uploaded to the iRAPT system. The contract is managed by the Department of Defense Fluid Handling Division with performance located in Tracy, California.

FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE7M3-26-T-8243

This contract is for the procurement of eight straight pipe tees made from 70/30 cupronickel material with a 1/2 inch nominal pipe size and socket weld ends. The items are to be manufactured using a metal casting process, which requires specific tooling. Quality assurance involves radiography and pressure testing to a minimum of 1600 PSI for 15 seconds, with sampling conducted according to MIL-STD-1916 or ASQ H1331. The contract strictly prohibits the use of Class I ozone depleting chemicals. The delivery is set for DLA Distribution Norfolk, Virginia, with a required delivery date of January 23, 2027, and a delivery window of 151 days. Inspection and acceptance will occur at the origin. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. The procurement is governed by the DLA Master List of Technical and Quality Requirements and follows a full and open competition process.

FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

PRODUCTION LOT TESTING

Solicitation # SPE7M1-26-T-282C

This contract is for the procurement of 17 units of 2 inch nominal pipe size socket-weld flanges manufactured from 90/10 Cuni copper alloy. Designed for a maximum operating pressure of 150 PSI for gas, water, and oil, the components must adhere to MIL-PRF-20042 and MSS SP-9 for spot facing and back facing requirements. Key physical specifications include a nominal flange diameter of 5.563 inches, a bolt circle diameter of 4.438 inches, and a thickness of 0.438 inches. The items are produced via a metal casting process requiring specific tooling and must undergo production lot testing according to SQAP00-471-5319. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with DCMA inspection required for specific characteristic tolerances. The contract mandates strict compliance with CMMC Level 2 certification and the protection of covered defense information. Additionally, the technical data is subject to ITAR or EAR export controls, restricting distribution to approved contractors with US/Canada Joint Certification Program certification. Delivery is required within 259 days after receipt of the order.

MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

TUBE ASSEMBLY, METAL

Solicitation # SPE7M4-26-T-337X

This contract is for the procurement of 12 metal tube assemblies, identified by NSN 4710007150228, intended for use in B-52 aircraft. The solicitation, SPE7M4-26-T-337X, is a total small business set-aside issued by the Department of Defense Fluid Handling Division. The items must be delivered to the DLA Distribution Depot at Tinker AFB, Oklahoma, with a delivery window of 36 days and a required delivery date of June 25, 2026. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, and requires compliance with the DLA Master List of Technical and Quality Requirements. Quality assurance will be managed through sampling methods according to MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The contract identifies Globe Engineering Co. and American Metal Fabrication Inc. as associated entities for part number 35-8245-523.

FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

RESTRICTOR UNIT, FLU

Solicitation # SPE4A5-26-T-353A

This solicitation is for the procurement of 17 Restrictor Units, FLU, under NSN 4730-01-515-7541. The contract requires adherence to DLA packaging requirements, MIL-STD-129 marking standards, and specific sampling methods such as MIL-STD-1916 or ASQ H1331. Delivery is expected within 256 days after order, with inspection and acceptance occurring at the destination. The agreement includes strict mandates regarding the prohibition of intentionally added mercury, except in specific functional cases. It also requires a CMMC Level 2 self-assessment and compliance with covered defense information regulations. Because the manufacturing of these units may involve casting or forging, the government notes that special tooling may be required and provides resources for assistance requests.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE7M3-26-T-8238

This contract is a solicitation for one titanium alloy tube reducer with dimensions of 5/8 inch by 1/4 inch, identified by NSN 4730-01-024-2549. The procurement is managed by the Department of Defense Fluid Handling Division and requires delivery within 20 days after receipt of the order. This is a restricted source item that must be manufactured according to OEM drawings, and any offers using alternative manufacturers must provide sufficient technical data for evaluation. The agreement incorporates several technical and quality requirements, including specific DLA master list standards for packaging, measuring and test equipment, and configuration change management. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, and the item must utilize Class 3 threads. Additionally, the contract strictly prohibits the use of Class I ozone depleting chemicals in the production or delivery of the item.

FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 1(00080)

Same awarding agency

Military-Compliant Packaging and Marking ServicesThe Department of Homeland Security, through the Sflc Procurement Branch 1, is seeking a subcontractor to provide specialized packaging, preservation, and labeling services. The primary objective is to ensure all deliverables are fully compliant with MIL-STD-129R and MIL-STD-2073-1E standards, which includes the application of Code 39 barcodes to facilitate military logistics tracking. This opportunity is designated as an 8(a) Sole Source set-aside under NAICS code 493190. The work will be performed in Curtis Bay, Maryland. Interested parties must note the response deadline of August 18, 2026, following the posting date of August 13, 2026.

Other Warehousing and Storage

POSTED

about 10 hours ago

DEADLINE

Anchor Windlass Overhaul Kit Assembly and SupplyThis subcontract involves the supply and assembly of 10 anchor windlass overhaul kits for the Department of Homeland Security, specifically through the Sflc Procurement Branch 1. The project requires the delivery of ready-to-install units featuring precision mechanical components such as bearings, seals, and shims, all of which must comply with established military standards. The contract is designated as an 8(a) Sole Source set-aside under NAICS code 333994, with the place of performance located in Curtis Bay, Maryland. The solicitation was posted on August 13, 2026, and requires a response by August 18, 2026.

Industrial Process Furnace and Oven Manufacturing

POSTED

about 10 hours ago

DEADLINE

Authorized Distribution or Sourcing of Fairbanks Morse OEM PartsThis subcontract opportunity with the Department of Homeland Security, specifically the Sflc Procurement Branch 1, seeks an authorized distributor or sourcing agent for Fairbanks Morse OEM parts. The selected provider must supply certified and traceable components accompanied by comprehensive documentation to meet federal delivery requirements. The procurement falls under NAICS code 423830 and was posted on August 13, 2026. Interested parties must submit their responses by the deadline of August 19, 2026, at 13:00:00 UTC.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

Specialized Packaging and Military Logistics LabelingThis subcontract opportunity with the Department of Homeland Security, managed by the Sflc Procurement Branch 1, requires the provision of specialized packaging, preservation, and labeling services for critical engine components. The selected provider must ensure all services are DLA-compliant, specifically focusing on individual NSN marking and strict adherence to MIL-STD-129 standards. The project falls under NAICS code 493190 and was posted on August 13, 2026. Interested parties must submit their responses by the deadline of August 19, 2026, at 13:00:00.000Z.

Other Warehousing and Storage

POSTED

about 10 hours ago

DEADLINE

Precision Machined Seal Component ManufacturingThe Precision Machined Seal Component Manufacturing subcontract, issued by the Department of Homeland Security through the Sflc Procurement Branch 1, involves the production of high-tolerance retaining plate seals. These components are designed for marine diesel engine cooling systems and must be manufactured strictly according to OEM specifications. The scope of work encompasses CNC machining, rigorous inspection processes, and the provision of traceable material certification to ensure quality and compliance. This opportunity was posted on August 13, 2026, with a response deadline of August 19, 2026. Classified under NAICS code 332721, the contract focuses on specialized precision machining services to support critical marine engine infrastructure.

Precision Turned Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

PARTS KIT, HOIST

Solicitation # 70Z08026Q20902B00

The United States Coast Guard Surface Forces Logistics Center is seeking quotations for ten anchor windlass overhaul kits, identified as NSN 3950-01-F24-6974 and OEM part number X-1836. These kits, manufactured by Norfolk Bearings and Supply Co. Inc., consist of various specialized components including spherical roller bearings, radial ball bearings, taper roller bearings, oil seals, and shim kits. Each kit must be individually packaged and marked according to MIL-STD-129R and MIL-STD-2073-1E standards. This is a firm fixed price contract to be awarded on an all-or-none basis to the lowest price technically acceptable offeror. The government anticipates a non-competitive sole source award to Norfolk Bearings and Supply Co. Inc. or their authorized distributors, and substitute parts are not acceptable. Interested parties must be registered in SAM, provide a valid Tax Identification Number, and submit their quotes by August 18, 2026, at 10:00 am EST. Shipping is FOB Destination to the USCG SFLC facility in Baltimore, Maryland.

Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 10 hours ago

DEADLINE

Dockside USCGC BEAR FY26 UPDS

Solicitation # 70Z08026SCGCBEARUPDS

The Department of Homeland Security, through the Sflc Procurement Branch 1, is seeking sources for the USCGC BEAR FY26 UPDS project. This sources-sought opportunity is categorized under NAICS code 336611 and is managed by the office located in Norfolk, Virginia. The primary point of contact for this requirement is Chelsea Clark. The performance of this contract will take place in Portsmouth, Virginia. Interested parties must note the solicitation number 70Z08026SCGCBEARUPDS and adhere to the response deadline of August 17, 2026.

Ship Building and Repairing

POSTED

about 10 hours ago

DEADLINE

PLATE RETAINING SEAL

Solicitation # 70z08026QAF133

The United States Coast Guard Surface Forces Logistics Center is seeking quotations for eight Plate Retaining Seals, part number 2251526, under NSN 5340-01-665-3439. These components are required for raw water and jacket water pumps on WMEC 210 and 210A/B class vessels. The government intends to award a firm fixed price contract on an all-or-none basis to the lowest price technically acceptable offeror. Due to the specific nature of the parts, the Coast Guard believes only Fairbanks Morse or their authorized distributors can provide the units, and substitute parts are not acceptable. This procurement is conducted as a combined synopsis and solicitation for a commercial item under FAR Subpart 12.6, using simplified acquisition procedures in accordance with FAR 13. The NAICS code is 333618. Offerors must be registered in SAM, provide a valid DUNS number and Tax Identification Number, and submit a completed FAR 52.212-3 representation. Strict packaging and marking requirements are in effect; each item must be individually packaged and marked with the description and NSN, as standard commercial packaging is unacceptable. Quotations must be submitted via email to Eric Goldstein by August 18, 2026, at 9:00 AM Eastern Standard Time.

Other Engine Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

No subcontract opportunities identifiable

POSTED

DEADLINE

Ship Repair Insurance and Risk Management Services

Direct Property and Casualty Insurance Carriers

POSTED

DEADLINE

Hazardous Materials Handling and Abatement

Remediation Services

POSTED

DEADLINE

Technical Inspection and Quality Assurance (QA) Services

Engineering Services

POSTED

DEADLINE