Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Electrical Component Manufacturing

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the manufacture and supply of a military-specification push button with NSN 5930-01-482-1775, engineered to meet all technical and quality standards prescribed by the Defense Logistics Agency. The component must be produced under stringent military specifications to ensure reliability, durability, and performance under extreme operational conditions, and the manufacturer is expected to adhere to approved quality assurance protocols throughout the production lifecycle. The item is intended for use within U.S. Department of Defense systems, with delivery required at the designated performance location identified as FPO Zip 96616. The contract is issued as a subcontract under the NAICS code 334419 for Other Electrical Equipment and Component Manufacturing, with a solicitation posted on July 23, 2026, and a firm response deadline of August 3, 2026. The contracting activity is managed by the Electrical Devices Division of the Department of Defense, which retains oversight for compliance, acceptance, and verification of delivered units. All parties must comply with federal acquisition regulations and defense-specific quality controls, with no set-aside preferences indicated. Interested suppliers must submit proposals through the official DIBBS portal before the deadline to be considered for award.

General Info

Manufacture and supply military-spec push button NSN 5930-01-482-1775 for DoD, delivery to FPO Zip 96616, compliance mandatory.

Agency

Department Of Defense → ELECTRICAL DEVICES DIVView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

FPO, AP, 96616, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ELECTRICAL DEVICES DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ELECTRICAL DEVICES DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of a military-spec push button (NSN: 5930-01-482-1775) compliant with DLA technical standards and quality requirements.

Similar Contracts

Same NAICS industry code

CABLE ASSEMBLY, PRINThe contract pertains to the procurement of two cable assemblies with part number 3575829 and NSN 5995-01-117-7017, issued under solicitation SPE7M8-26-T-5211 by the Department of Defense’s Electrical Devices Division. Delivery is required within 378 days from award, with performance to be conducted at Tracy, California. Strict prohibitions against the use of Class I ozone-depleting chemicals are enforced, overriding any conflicting specification requirements; any substitute chemicals must be submitted for approval unless explicitly authorized by the technical specifications. The contract incorporates technical and quality requirements from the DLA Master List, and includes mandated compliance with DLA packaging standards, removal of government identification from non-accepted items, and physical marking of bare items. Cybersecurity compliance requires CMMC Level 2 certification through an authorized third-party assessment organization. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DOD training and the DLA export-controlled data questionnaire. The solicitation was posted on July 24, 2026, with responses due by July 29, 2026.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

CABLE ASSEMBLY, RADIThe contract pertains to the procurement of seven radio frequency cable assemblies, identified by NSN 5995-01-259-2703, with delivery required 181 days after award, targeting a need ship date of January 22, 2027. Performance is to occur at the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with FOB Origin terms applying. The item involves technical data subject to export control under either ITAR or EAR, necessitating strict compliance with DFARS 252.225-7048, including controlled access limited to DLA contractors who hold JCP certification, have completed mandatory training, and received formal approval. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with preservation methods restricted to clean and dry conditions, no preservatives, and prohibitions against mercury-containing substances unless specifically exempted. Items must be physically marked per RQ017 and include appropriate export control labels and barcoding as required by MIL-STD-129, including 2D Data Matrix codes. The contractor must comply with cybersecurity requirements under NIST SP 800-171 and hold CMMC Level 2 certification. Quality assurance mandates manufacturing inspection systems conforming to SAE AS9003 or ISO 9001 tailored to AS9003, with government inspection at destination using AQL levels of 0.1 for critical, 1.0 for major, and 4.0 for minor attributes. Hazardous materials must be labeled per 29 CFR 1910.1200, with pre-award submission of hazard warning labels required. All contractors must be registered with a UEI and CAGE code, and small business status representations must be accurately declared. Payment processing is exclusively via WAWF, and invoicing must follow the prescribed document types. The contract type is unspecified and will be determined by the contracting officer, with no pricing data currently provided in the solicitation.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

SERVO,ELEVATIONThis contract pertains to the procurement of a SERVO, ELEVATION under solicitation N0010426QXA90, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The requirement is for a Firm-Fixed Price delivery, with all submissions required to be made electronically to CHARLES.T.MILLER7.CIV@US.NAVY.MIL by the deadline of October 30, 2026, though the offer deadline was extended to May 29, 2026. Contractors must be authorized suppliers or distributors of the original equipment manufacturer, with official documentation proving authorization required for non-manufacturers. The item must comply with MIL-STD-130 marking standards and be produced to the exact CAGE code and reference number specified, with any design or part number changes subject to prior written approval. FOB Origin terms apply, and all packaging must adhere to MIL-STD-2073. Government source inspection is mandatory, and the contractor remains fully responsible for quality control, inspection records, and compliance—even in the absence of explicit inspection clauses. Evaluation will prioritize price first, followed by past performance and supplier performance risk under DFARS 252.204-7024. Quotes must include unit and total pricing, delivery lead time, CAGE codes for both award and inspection, a cost breakdown with profit rate if feasible, and a minimum 90-day expiration date. The contract enforces Buy American and Free Trade Agreements requirements, and incorporates security prohibitions, annual representations, and national defense priority rating provisions. All technical documents referenced are to be obtained through authorized DOD sources, with strict distribution controls applied to marked materials, including NOFORN and limited distribution designations. The NAICS code is 334419, and the solicitation emphasizes adherence to all referenced military standards, with no substitutions permitted without formal approval from the contracting officer. Awards will be made only to qualified, authorized sources, and no delay will be accommodated for entities seeking authorization post-submission.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Push Button Switch Supply (NSN 5930015366291)The contract involves the supply and delivery of 11 units of a push-button switch identified by the National Stock Number 5930015366291, which must fully comply with applicable military specifications. The requirement includes all necessary packaging, labeling, and accompanying documentation to ensure proper handling, identification, and traceability in accordance with defense standards. The items are to be delivered to Hill Air Force Base, Utah, with the ZIP code 84056-5734 designated as the place of performance. The solicitation is issued as a subcontract under NAICS code 334419, which pertains to other electrical equipment and component manufacturing. The posting date is July 23, 2026, and responses are due by August 3, 2026, indicating a narrow window for submission. The contract is managed by the Electrical Devices Division under the Department of Defense, and the official reference can be accessed via the provided DIBBS link.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Cable Assembly Manufacturing and DeliveryThe contract entails the manufacture, packaging, marking, and delivery of 215 units of a cable assembly according to specification RA001, with full compliance to military standards governing packaging, labeling, and traceability requirements. All work must adhere to rigorous defense-sector protocols to ensure product integrity, accountability, and readiness for military use. The scope covers every stage from production through final delivery, emphasizing strict adherence to technical and regulatory specifications. Issued as a subcontract under the Department of Defense with the Defense Logistics Agency as the overseeing organization, this effort falls under NAICS code 334419, which pertains to other electronic component manufacturing. The solicitation was posted on July 23, 2026, and the place of performance and point of contact details are not specified in the provided data. The contract is accessible via the DIBBS system under award number SPE4A626PY639, indicating it is part of the broader defense supply chain procurement infrastructure.

Defense Logistics Agency

POSTED

DEADLINE

Rotary Switch Supply and DeliveryThe contract involves the procurement, packaging, marking, and timely delivery of a rotary switch identified by NSN 5930015135425, adhering strictly to Department of Defense standards for quality, reliability, and military specifications. The work must be performed in alignment with applicable DoD procurement guidelines, ensuring all materials meet stringent technical and documentation requirements for use in defense systems. The item is to be delivered to a military mail facility with a zip code of 96616, indicating performance occurs at a forward-operating or overseas location under FPO designation. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, allowing potential contractors a three-week window to submit proposals. This is classified as a subcontract under the NAICS code 334419, which corresponds to other electronic component manufacturing, confirming the specialized nature of the component being sourced. The contracting office is the Electrical Devices Division within the Department of Defense, emphasizing the technical oversight required for this procurement. All packaging and labeling must comply with military marking standards, and delivery timelines are critical to maintaining operational readiness.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Manufacture and Supply of Push Switch (NSN 5930015123153)The contract awards the manufacture and supply of a military-specification push switch identified by NSN 5930015123153, requiring full compliance with all applicable hazardous materials regulations, packaging directives, and labeling standards. The product must meet exacting defense performance criteria and be produced or sourced in accordance with military specifications, ensuring reliability and safety in operational environments. All submissions must adhere to strict quality control protocols and documentation requirements to validate conformance with federal defense standards. The solicitation, issued by the Electrical Devices Division under the Department of Defense, is structured as a subcontract opportunity with a response deadline of August 3, 2026. Performance is required to be localized in San Diego, California, with the zip code 92136-3581 serving as the designated place of performance. The North American Industry Classification System code 334419 applies, categorizing the work within the broader scope of other electronic component manufacturing. Interested parties must submit proposals through the official DIBBS portal prior to the stated deadline to be considered for award.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Precision Electrical Switch ManufacturingThe contract calls for the manufacture of a military-specification push switch identified by NSN 5930012125377, with stringent requirements for electrical performance, mechanical durability, and environmental resilience to meet defense standards. The product must withstand extreme conditions including temperature variations, moisture, vibration, and shock without degradation in function, ensuring reliability in operational environments. All components and processes must comply with military specifications and quality control protocols to guarantee consistent performance under demanding scenarios. This is a total small business set-aside under the SBA program, with the NAICS code 334419 indicating the focus on other electrical equipment and component manufacturing. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, and is issued as a subcontract under the Department of Defense’s Electrical Devices Division. The work will be performed in accordance with federal acquisition regulations, and the contractor must be a certified small business eligible for the set-aside. All production and testing must be completed in full compliance with the technical and regulatory requirements without deviation.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Supply of COTS Push Button Switch with LEDThe contract seeks the supply of a commercial off-the-shelf push button switch with integrated LED, identified by part number 33989-010 and national stock number 5930015629977, for use in defense logistics applications. This item is intended for procurement under a subcontract arrangement, with the Department of Defense through its Electrical Devices Division as the contracting entity. The product must meet military-grade specifications despite being commercially available, ensuring durability, reliability, and compatibility with existing defense systems. The place of performance is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, indicating where delivery and acceptance will occur. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026, providing a two-week window for submissions. The North American Industry Classification System code 334419 identifies the relevant industry sector for electronic component manufacturing. Although no set-aside type is specified, the contract remains open to qualified commercial suppliers capable of fulfilling defense requirements without special certification or small business exclusivity. The procurement is managed through the DIBBS platform, and all interested parties must submit proposals via the provided online portal. Timing, technical compliance, and delivery to the specified location are critical factors for successful bid consideration.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Commercial-Off-The-Shelf (COTS) Electrical Switch SupplyThe contract is for the supply of 38 commercial-off-the-shelf electrical push switches identified by NSN 5930-01-231-3697 and part number 11441728-6, with all units required to meet strict military packaging, marking, and delivery standards. The procurement is structured as a subcontract under a Women-Owned Small Business Set-Aside, targeting qualified WOSB vendors to fulfill the requirement. The item falls under NAICS code 334419, indicating classification within other electronic component manufacturing. Delivery must be completed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026. The contracting office is the Electrical Devices Division within the Department of Defense, and the process is administered through the DIBBS platform.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

LEAD, ELECTRICALThe contract pertains to the procurement of LEAD, ELECTRICAL with NSN 6150-01-458-5881 and part number 12448194-2, requiring a quantity of 18 units delivered FOB origin within 168 days. The unit price is $18.00 per EA, totaling $324.00, with no variance allowed in quantity. Delivery must be made to the DLA Distribution facility at New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and cushioning, with ZZ cushioning excluded around connectors wider than one inch. Marking requirements follow MIL-STD-129 with no special marking codes applied, and palletization must adhere to DLA packaging standards. Technical and quality requirements are governed by the DLA Master List referenced in RP001 and RA001, with applicable revisions determined by solicitation or award dates. The contract was issued under solicitation SPE7L4-26-T-5775, with a response deadline of August 3, 2026, and an original required delivery date of December 24, 2026, though the needed ship date is set for January 19, 2027. The NAICS code is 334419, and the contracting agency is the Department of Defense under LSO Combat Vehicles and Armament. Point of contact is Anna-Rachelle Betts, reachable via email and phone provided.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

SWITCH, ROTARYThe contract solicits 50 rotary switches with NSN 5930-12-129-3370 under solicitation number SPE7M8-26-T-5578, with a delivery requirement of 168 days after order. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The alternate offeror must submit a complete data package containing full documentation for both the primary and alternate parts. The contract is issued by the Electrical Devices Division of the Department of Defense, with performance required at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026. Any supplies not accepted by the government must have all government identification removed prior to return. Primary point of contact is Dondiego Boler, reachable via email and phone provided.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → ELECTRICAL DEVICES DIV

Same awarding agency

SWITCH, THERMOSTATICThe contract solicitation SPE7M8-26-T-5291 seeks the procurement of two thermostatic switches, identified by part number 222-10NL-2222495 and NSN 5930010649947, from Detroit Switch Inc. Delivery is required FOB Origin with a 168-day allowable receipt offset, with an original required delivery date of November 9, 2026, and a need ship date of January 5, 2027. The items must be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E and MIL-DTL-28786 for switches, including dry preservation methods and unspecified materials, while labeling and barcoding must conform to MIL-STD-129 with no special marking required. A mercury prohibition applies to all hardware and supplies, except for functional uses in batteries, fluorescent lamps, specified instruments, weapon systems, and reagents approved by NAVSEA, with portable mercury-containing devices requiring shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. The contract incorporates DLA’s Master List of Technical and Quality Requirements, and all packaging and hazardous material handling must satisfy IP025 standards. The solicitation emphasizes full and open competition under simplified acquisition procedures and mandates compliance with numerous FAR and DFARS clauses, including cybersecurity safeguards, trafficking and employment eligibility requirements, sustainable products, hazardous materials identification, and safeguarding covered defense information. Contractors must hold a valid Unique Entity ID and represent their size and socioeconomic status, including potential small business or HUBZone certifications, and submit hazard warning labels and MSDS prior to award. Invoicing is required through WAWF, and all technical and quality documentation aligns with DLA’s electronic procurement systems. The contract type is not explicitly stated, but the FOB Origin pricing structure and emphasis on compliance suggest a potential Lowest Price Technically Acceptable evaluation approach.

Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

DEADLINE

SWITCH, PRESSUREThis contract is for the procurement of pressure switches under solicitation SPE7M8-26-T-5263, issued by the Department of Defense’s Defense Logistics Agency through its Electrical Devices Division. The item is sourced from Detroit Switch Inc with part number 444-10-XA1-444084XA-1 and is controlled by a source-limited drawing and limited rights data, meaning only vendors with direct access to the approved technical data or traceability to the approved source may submit quotes. The requirement is for 29 units with a unit price of $29.000, totaling $841.00, to be delivered FOB destination to the DLA New Cumberland Facility in Pennsylvania within 126 days of order. The NSN is 5930-01-451-2236, and delivery must strictly adhere to MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including D3 unit containers and U pack code, with no special markings indicated. All items must comply with the DLA Master List of Technical and Quality Requirements, and the contract explicitly prohibits the use of Class I ozone depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except for specific functional applications like batteries and instruments that meet NAVSEA 5100-003D secondary containment requirements. Hazard communication must follow DFARS 252.223-7001, and ocean transportation must use U.S.-flag vessels unless a waiver is obtained. The contract is subject to fixed-price terms under FAR clauses including inspection at destination, default provisions, changes, and small business representation requirements, with electronic invoicing mandated via WAWF. Offerors must hold a valid UEI and CAGE code, represent their small business status accurately, and be registered in SAM. The solicitation closed on July 29, 2026, with proposals submitted exclusively through the DIBBS portal.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

SWITCH, PRESSUREThe contract pertains to the procurement of 35 pressure switches, identified by NSN 5930010129007 and part number P/N 222-10NB4-2222534, supplied by DETROIT SWITCH INC, under solicitation SPE7M8-26-T-5289. Deliveries are required to be shipped FOB Origin with a 131-day delivery timeline, and the item must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania by the original required delivery date of January 21, 2027, with a need ship date of November 29, 2026. Zero variance is permitted in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E using Method 31 (Clean/Dry), enclosed in a D3 corrugated fiberboard box with no preservation materials or cushioning. Marking must adhere to MIL-STD-129 with no special markings applied. Mercury and mercury-containing compounds are strictly prohibited unless functionally necessary in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents as specified by NAVSEA, in which case portable devices must include a secondary containment and be shock-proof per NAVSEA 5100-003D. The item is subject to CMMC Level 2 self-assessment and must comply with DFARS 252.204-7012 for safeguarding covered defense information. Hazardous materials, if present, must be labeled per 29 CFR 1910.1200, with Safety Data Sheets submitted for review prior to award, and all labeling must conform to MIL-STD-129. The contractor must use Wide Area WorkFlow for invoicing and receiving reports. The contract contains multiple FAR and DFARS clauses including employment eligibility verification, combating trafficking in persons, sustainable products, cybersecurity safeguarding, accelerated payments to small business subcontractors, and notification of potential safety issues. Small business representation is required through FAR 52.219-28, and the NAICS code is 335313. The contract does not specify a unit price or total value, but the offer must be submitted electronically via the DIBBS portal by the July 29, 2026 deadline,

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Small Business Subcontracting ParticipationSmall businesses including small businesses, women-owned small businesses, service-disabled veteran-owned small businesses, and HUBZone concerns are invited to participate in subcontracting opportunities under this solicitation, which supports socioeconomic programs designed to foster inclusive contract participation. The opportunity is tied to a procurement under NAICS code 334332, relating to the manufacture of electronic components and parts, with performance expected to be centered in New Cumberland, Pennsylvania, zip code 17070-5002. This subcontracting opportunity is managed by the Electrical Devices Division within the Department of Defense and is open for response until August 3, 2026, with the solicitation posted on July 23, 2026. Participation is intended to promote small business involvement in defense-related supply chains, and entities interested in joining as subcontractors should note the specific socioeconomic criteria and program guidelines referenced in Section K of the solicitation.

POSTED

DEADLINE

Maritime Repair or Reflagging ServicesThe contract pertains to maritime repair or reflagging services under U.S. maritime compliance requirements, with potential alignment to DFARS 252.247-7025, indicating adherence to defense federal acquisition regulations concerning vessel nationality and operational standards. This is a subcontract opportunity issued by the Electrical Devices Division under the Department of Defense, targeting vendors capable of performing necessary vessel modifications to meet federal maritime obligations, including potential reflagging to ensure compliance with U.S. registry and operational rules. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the physical location where services must be delivered. The solicitation is posted for response by August 3, 2026, and falls under NAICS code 811411, which classifies it within the marine repair and maintenance industry. There is no set-aside designation provided, meaning the subcontract is open to all eligible contractors without preference based on business size or owner demographics. The absence of a solicitation number or point of contact suggests the primary engagement mechanism is through the DIBBS portal, where full details and requirements are accessible via the provided UI link. Interested parties must ensure their proposals address compliance with U.S. maritime laws and defense supply chain standards, with emphasis on technical capability, regulatory adherence, and timely execution within the specified performance location.

Home and Garden Equipment Repair and Maintenance

POSTED

DEADLINE

Hazard Warning Labeling and Compliance ServicesThe contract requires the provision of hazard warning labels and Material Safety Data Sheets compliant with DFARS 252.223-7001 and OSHA’s Globally Harmonized System standards, ensuring proper identification and communication of chemical hazards for Department of Defense use. All deliverables must align with federal regulatory requirements for workplace safety and defense supply chain accountability, with performance focused on accuracy, timeliness, and adherence to updated GHS labeling elements and SDS formatting. The subcontract is issued by the Electrical Devices Division under the Department of Defense and is performance-based at New Cumberland, Pennsylvania, with a response deadline of August 3, 2026. The NAICS code 541690 indicates this involves other scientific and technical consulting services, emphasizing the specialized nature of compliance documentation and labeling services. The solicitation does not specify a set-aside type, and potential offerors must ensure full alignment with defense procurement regulations and the technical specifications governing hazardous material communication under federal mandates.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Rotary Switch Supply (NSN 5930121293370)The contract calls for the supply of 50 units of rotary switches identified by NSN 5930121293370, a commercial off-the-shelf electrical component intended for use by the Department of Defense. The item is classified under NAICS code 334332, indicating it falls within the category of other electronic component manufacturing, and is being procured as a subcontract under the Electrical Devices Division. Delivery is required to be performed at New Cumberland, Pennsylvania, with a zip code of 17070-5002, and all units must fully comply with the specified technical requirements for military applications. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, providing potential vendors a two-week window to submit proposals. The procurement is not set aside for small businesses or any specific socioeconomic category, and the point of contact details are not listed within the provided data. The contract opportunity is accessible via the DIBBS portal using the provided reference link.

POSTED

DEADLINE

Hazard Communication and Safety Labeling (if applicable)The contract requires the assessment and application of hazard warning labels in compliance with DFARS 252.223-7001 and OSHA 29 CFR 1910.1200 for any hazardous materials present in the product or its packaging. This includes ensuring that all labeling meets federal regulatory standards for chemical hazard communication, covering elements such as signal words, pictograms, hazard statements, and precautionary measures. The work is tied to a subcontract under the NAICS code 541620 for scientific and technical consulting services and must be performed with precise adherence to Department of Defense requirements. Performance is expected to be completed at or in support of the specified location in New Cumberland, Pennsylvania, with a response deadline of August 3, 2026. Although no specific point of contact is listed, the solicitation is administered by the Electrical Devices Division within the Department of Defense, indicating that the contractor will be providing support services related to military equipment or components that require strict hazard communication controls. The contract does not specify a set-aside type, and the posting date indicates a future solicitation window, allowing potential respondents time to prepare submissions through the DIBBS platform.

Environmental Consulting Services

POSTED

DEADLINE

Military Shipment Marking and Labeling ServicesThis contract requires full compliance with MIL-STD-129 standards for marking and labeling all military shipments, including the application of barcodes, IUID identifiers, and shipping labels with the designated DoDAAC W1A8. All labels must be accurately placed and legible to ensure traceability and proper handling throughout the defense logistics chain. Hazard warnings must be included wherever applicable to meet safety and regulatory protocols for dangerous goods. The work is classified as a subcontract under NAICS code 541370 and is managed by the Electrical Devices Division of the Department of Defense, with performance required at the location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 23, 2026, and responses must be submitted by August 3, 2026. All parties must ensure adherence to DoD labeling requirements without exception, and failure to comply with marking standards may result in rejection of the shipment or contract penalties.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires the provision of comprehensive cleaning, drying, packaging, and preservation services for thermostatic switches in full compliance with MIL-STD-2073-1E and DLA RP001 standards. All work must include proper container labeling and palletization to ensure readiness for military logistics and storage. The services are intended to maintain the integrity and functionality of the switches throughout handling, transportation, and long-term storage under defense department requirements. The solicitation is classified as a subcontract under NAICS code 312230 and is issued by the Electrical Devices Division within the Department of Defense. The place of performance is designated as New Cumberland, Pennsylvania with a ZIP code of 17070-5002. Proposals must be submitted by the response deadline of August 3, 2026, and the opportunity was posted on July 23, 2026. Interested parties should access the full details through the provided DIBBS link to ensure adherence to all technical and procedural specifications.

Tobacco Manufacturing

POSTED

DEADLINE

Thermostatic Switch Manufacturing and SupplyThe contract seeks the manufacture and supply of twelve units of thermostatic switches identified by NSN 5930017158026 and part number AT0E-3880-2, meeting military specifications. The work is to be performed under a subcontract and is governed by NAICS code 335313, which classifies it under Electrical Equipment and Appliance Manufacturing. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, indicating a limited window for proposals. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contracting entity is the Electrical Devices Division under the Department of Defense. This procurement is strictly for delivery of components that adhere to precise military standards, ensuring reliability and performance in defense-related applications.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE