Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Electrical Component Manufacturing

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the precise manufacturing of a military-spec electrical connector receptacle, part number ST5M1426A001, in full compliance with a detailed technical data package. This encompasses every stage of production including material sourcing, precision machining, assembly, and final inspection to meet stringent defense standards. All work must adhere to exacting quality controls and military specifications to ensure reliability and performance in operational environments. The solicitation is classified as a subcontract under NAICS code 334417 and is managed by the Active Devices Division within the Department of Defense. Proposals must be submitted by August 3, 2026, following the July 19, 2026 posting date. While no set-aside provisions or specific address details are provided, the performance location and point of contact remain unspecified, and all relevant information is accessible through the official DIBBS portal linked in the solicitation.

General Info

Manufacture military-spec electrical connector ST5M1426A001 per defense standards, submit proposal by August 3, 2026.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334417 - Electronic Connector ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 19

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of a military-spec electrical connector receptacle (P/N ST5M1426A001) per technical data package, including material sourcing, machining, assembly, and final inspection.

Similar Contracts

Same NAICS industry code

Precision Manufacturing of Connector Adapter (NSN 5935-01-574-0494)The contract pertains to the precision manufacture of 14 military-specification connector adapters designated by NSN 5935-01-574-0494, encompassing full lifecycle production from design validation through final testing. Each unit must meet stringent defense standards set by the Department of Defense and the Defense Logistics Agency, requiring exacting machining, assembly, and quality control protocols to ensure operational reliability in demanding military environments. The work includes comprehensive compliance verification to guarantee alignment with all technical, material, and documentation requirements mandated by federal defense specifications. This subcontract was posted on July 20, 2026, under the NAICS code 334417 for other electronic component manufacturing, with performance tied to the broader objectives of the Department of Defense. The contract is administered by the Defense Logistics Agency and is linked to a specific award record via the DIBBS system, indicating its formal integration into the DoD procurement framework. While no specific location or point of contact is provided, the scope demands end-to-end accountability for fabrication, inspection, and certification to support military logistics and readiness initiatives.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

CONNECTOR, PLUG, ELECTRIThe contract solicitation SPE7M126U4482 seeks the procurement of 265 electrical plug connectors with NSN 5935011143439 under an indefinite delivery contract structure, with delivery required within 102 days after order placement and FOB origin terms. The item is a qualified product listed under Federal Stock Class 5935, requiring compliance with qualification standards outlined in procurement note H01 and technical specifications MIL-DTL-83723/69B(2) and MIL-DTL-83723H(4). The connector is designated as a critical application item and is subject to strict prohibitions against the use of any Class I ozone-depleting substances in its design, manufacturing, or testing unless prior written consent is obtained from the contracting officer; this prohibition overrides all other specification requirements but does not waive performance obligations. The contract mandates that packaging and marking strictly adhere to MIL-STD-129 for labeling and barcoding, with hazardous materials compliant with FED-STD-313 and TQ requirement IP025, while non-hazardous items must follow ASTM D3951 — though all DLA Master List technical and quality requirements take precedence. Palletization must conform to RP001, and bare item marking must satisfy RQ017. Inspection and acceptance occur at the destination, with the government assuming responsibility for both functions. The contract incorporates a comprehensive suite of FAR and DFARS clauses covering equal opportunity, human trafficking, employment eligibility, sustainable products, hazardous material safety, cybersecurity (including NIST SP 800-171 and safeguarding covered defense information), subcontracting, payment processing, export control, and prohibitions on hexavalent chromium and defense telecommunications from sanctioned entities. Payment is processed exclusively through Wide Area WorkFlow, and all offers must be submitted electronically via DIBBS by the August 4, 2026 deadline. The contract is competitively awarded under full and open competition, with no set-aside, and the estimated contract value per order is capped at $350,000, though no unit price is specified, leaving the actual financial obligation contingent upon future order quantities and pricing. The contractor must also comply with all representations required under Section K, including disclosure of unique entity identifiers, CAGE codes, and socioeconomic status if applicable, and must verify eligibility for federal contracts through Employment Eligibility Verification and

MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

PLATE, RETAINING, ELECTRThe contract governs the procurement of a retaining plate for electrical connectors, identified by NSN 5935013637382, under solicitation SPE7M1-26-U-4485, issued by the Department of Defense’s Maritime Supply Chain. The item is classified as a qualified product requiring compliance with the Qualified Products List (QPL) for Federal Stock Class 5935 connector assemblies and contacts, as defined in procurement note H01, and must conform to the non-government standard SAE AS85049F Revision F dated April 1, 2021, with part number M85049/95-24A-A. The contract specifies an estimated quantity of 120 units with a guaranteed minimum of 18 units and a maximum contract value of $350,000, structured as an indefinite-delivery contract where orders will be issued periodically under a bilateral framework. All deliveries are FOB origin, with a performance timeline of 131 days after award, and inspection and acceptance occur at the destination under FAR 52.246-2. Packaging and marking must adhere to MIL-STD-129, with hazardous materials handled per FED-STD-313 and TQ Requirement IP025, while non-hazardous materials follow ASTM D3951, though DLA’s Master List of Technical and Quality Requirements supersedes all others. Palletization must comply with RP001, and bare item marking is required per RQ017. The use of any Class I ozone-depleting substances is strictly prohibited without written consent from the contracting officer, a restriction that overrides other specifications but does not excuse product performance requirements. The contract imposes extensive cybersecurity, compliance, and procedural obligations. Contractors must adhere to NIST SP 800-171 controls, safeguard covered defense information per 252.204-7012, and report cyber incidents in accordance with DoD mandates, while also complying with restrictions on covered telecommunications equipment under 252.204-7018. Labor and ethics requirements include whistleblower protections, prohibitions on trafficking in persons, and employment eligibility verification. Invoicing must be submitted exclusively via Wide Area WorkFlow using permitted document types, and contractors are required to maintain active registration in the System for Award Management. All representations and certifications must

MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

CONNECTOR BODY, RECEThe contract pertains to the procurement of a commercial off-the-shelf connector body, part number 5-582151-2, with NSN 5935-01-320-1623, sourced from TE Connectivity Corporation. Two line items are specified: three units at $3.00 each and four units at $4.00 each, totaling seven units with a combined value of $25.00. Delivery is required within five days from the origin, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951. If the item is non-hazardous under FED-STD-313, it must be packaged in accordance with ASTM D3951; if hazardous, it must follow TQ requirement IP025. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 DLA packaging standards. The unit of issue is each, and quantity per unit pack is one. Shipping must be via the fastest traceable means; parcel post is prohibited. Delivery must reach the Puget Sound Naval Shipyard in Bremerton, WA, with designated freight and parcel post addresses provided. The original required delivery date is July 17, 2026, under contract SPE7M0-26-T-013M, and the solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026. Government-specific codes and contacts, including the point of contact Rocio Mino, are included for administrative and logistics purposes.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

CONNECTOR, RECEPTACLThe contract is for a single unit of a connector, receptacle, identified by NSN 5935-01-376-1977, under purchase request 7017539670, with delivery required within 20 days after award. It is issued under solicitation number SPE7M5-26-T-336K, posted on July 20, 2026, with responses due by July 31, 2026. The procurement falls under NAICS code 334417 and is managed by the Active Devices Division of the Department of Defense, with performance located in Martinsburg, West Virginia, zip code 25405-7704. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. The contractor must comply with DLA packaging requirements and adhere to physical identification and bare item marking standards. Government identification must be removed from non-accepted supplies. The offeror is required to provide a complete data package for both the approved and alternate part, as no data is currently available. Primary point of contact is Margaret Smith, reachable via email and phone provided.

ACTIVE DEVICES DIVISION

POSTED

about 5 hours ago

DEADLINE

ADAPTER, CONNECTORThe contract pertains to the procurement of an adapter connector with NSN 5935-01-544-9573 and part number 941-005NFF35SN-98, issued under solicitation SPE7M1-26-U-4487 by the Department of Defense through the Maritime Supply Chain. The requirement is for 16 units at $16.00 each, delivered FOB origin within 53 days, with no variance allowed in quantity. Inspection and acceptance occur at the destination. Technical and quality requirements are governed entirely by the DLA Master List of Technical and Quality Requirements, with specific references to MIL-STD-1916 or ASQ H1331 for sampling, mandating zero non-conformances unless otherwise stated. Attributes are classified with verification levels or AQLs of VII IV II or 0.1 1.0 4.0 respectively, and unspecified attributes default to major. Packaging must conform to MIL-STD-129 and RP001 DLA packaging standards, with hazardous materials following FED-STD-313 and IP025, while nonhazardous items adhere to ASTM D3951 unless superseded by DLA requirements. Bare item marking and government identification removal are required under RQ017 and RQ011 respectively. Palletization must comply with DLA guidelines, and the unit of issue is EA. The contract is managed by Bryan Fair at DLA with a response deadline of August 4, 2026.

MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

JACK BOXThe contract solicitation for the JACK BOX under NSN 5935-01-572-5631 with a quantity of 77 units is issued by the Department of Defense’s Maritime Supply Chain under solicitation number SPE7M1-26-U-4489, with a response deadline of August 4, 2026. The procurement is structured as a simplified acquisition with an indefinite delivery contract framework and a maximum contract value of $350,000. Delivery is required within 73 days after order placement under FOB Origin terms, with inspection and acceptance occurring at the destination. All supplies must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including the use of 2D Data Matrix barcodes. Packaging must be clean and dry using preservation method 31 with no additional preservation materials, and must be unit packed in E5 containers with sixteen intermediate containers. Physical identification of bare items per RQ017 is mandatory, and government identification must be removed from non-accepted supplies. The use of mercury or mercury-containing compounds is strictly prohibited unless exempted for specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified chemical reagents, with portable fluorescent lamps and instruments requiring shockproof construction and a second containment boundary as per NAVSEA 5100-003D. Class I ozone-depleting substances are forbidden in all phases of production and cleaning unless written approval is obtained from the Contracting Officer, with this restriction overriding but not relaxing any performance requirements. The contractor must comply fully with the DLA Master List of Technical and Quality Requirements, referencing all applicable R and I numbers. Hazard communication requirements under 29 CFR 1910.1200 must be met with proper labeling and submission of Material Safety Data Sheets before award, and labels must conform to DFARS 252.223-7001 and MIL-STD-129. Radioactive materials exceeding 0.002 microcuries per gram or 0.01 microcuries total activity must be clearly identified per MIL-STD-129. The contract incorporates multiple FAR and DFARS clauses including equal opportunity, combating trafficking, employment eligibility verification, sustainable products, safeguarding of contractor information systems, NIST SP 800-171 DOD assessment

MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

C0NNECTOR, PLUG ELECThe contract is for the procurement of 40 units of the electrical plug connector, NSN 1680-01-501-4748, with a firm fixed price and zero variance in quantity, meaning exactly 40 units must be delivered without adjustment. The delivery timeline is set at 430 days after receipt of order, and FOB terms designate destination as the point of title transfer, placing all transportation costs and risks on the contractor until the item reaches the designated delivery point. Inspection and acceptance are mandated at origin, requiring the contractor to ensure full compliance with all technical, quality, and packaging specifications prior to shipment. The item is designated as a critical application component, and the contract mandates adherence to stringent quality assurance provisions including MIL-STD-1916 or ASQ H1331 Table 1 for zero-based sampling, with critical attributes requiring an AQL of 0.1, major attributes at 1.0, and minor at 4.0. The contractor must comply with all technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced via R numbers, and must implement configuration change management through formal engineering change proposals for any deviation or waiver. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, wrapping materials, unit container types, and intermediate packaging configurations, with palletization governed by DLA’s RP001 packaging requirements. All items must bear physical identification per RQ017 and be labeled with data matrix barcodes and human-readable text as required by MIL-STD-129, with no special marking codes needed. The contractor is required to upload shipment documentation into the DLA Automated Records Traceability (DART) system due to the airworthiness nature of the part and must prioritize this order under the Defense Priorities and Allocations System (DPAS). The contract includes a comprehensive set of FAR clauses covering equal opportunity, fraud prevention, trafficking in persons, cybersecurity compliance with NIST SP 800-171, contract administration via WAWF invoicing, and performance-based clauses for termination and disputes. Payment processing is tied to DoDAACs, and the procurement is structured as an indefinite-delivery/indefinite-quantity contract with a five-year base period and no options, capped at $899,999.99 in total value. All proposals

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in about 1 month

CONNECTOR, RECEPTACLE, EThis contract solicitation, identified as SPE7M1-26-U-4481, seeks the supply of an electrical receptacle connector with NSN 5935004624724, conforming to the specifications of Amphenol Corp part number 348-33E18-85S1. The requirement is for an estimated quantity of 39 units under an indefinite-delivery contract mechanism with a total contract ceiling of $350,000, though no guaranteed purchase volume is specified. Delivery must be completed within 113 days after order issuance, with FOB Origin terms placing transportation risk on the contractor until the item reaches the designated destination within the continental United States. Inspection and acceptance occur at the destination point, governed by FAR 52.246-2. Packaging and preservation must comply with MIL-STD-2073-1E using QUP 001, preservation method 31, and climate control level 1, while marking must adhere to MIL-STD-129 with no special markings required. The item must be physically identified and labeled according to DLA requirements RQ017 and must not contain any intentional mercury except for exempted functional uses such as batteries, fluorescent lamps, sensors, or specified reagents, with portable mercury-containing devices requiring shockproof design and a secondary containment boundary per NAVSEA 5100-003D. The use of Class I ozone-depleting substances is strictly prohibited unless prior written approval is obtained from the Contracting Officer. Compliance with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers is mandatory, and the contractor must affirm representations regarding small business status, unique entity identifier, CAGE code, and compliance with prohibitions on covered telecommunications equipment and human trafficking. All invoicing and payment processing must be conducted through the Wide Area WorkFlow system in accordance with DFARS clauses, and the contractor is bound by multiple safeguarding and cybersecurity clauses including 252.204-7012 for protected defense information. The evaluation will be price-driven, with preference potentially given to HUBZone small businesses, though no non-price factors are formally stated, implying a Low Price Technically Acceptable approach.

MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

SWITCH, PUSHThe contract pertains to the procurement of 14 units of a PUSH SWITCH with NSN 5930-01-148-6254 under solicitation SPE7M2-26-Q-0645, issued by the Department of Defense’s Nuclear Reactor Program. Delivery is required within 133 days after order, and responses must be submitted by July 26, 2026, with the solicitation posted on July 20, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions. The item includes technical data subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure or export to foreign persons, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Only contractors with approved US/Canada Joint Certification Program certification, completed DLA export control training, and approved access via the DLA questionnaire may handle this controlled data. The place of performance is Tracy, California 95304-5000, and primary point of contact is Victoria Payne at victoria.payne@dla.mil or 614-693-9911.

NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

CONNECTOR, RECEPTACLE, EThe contract is for a single electrical receptacle connector, part number 016152-BB35YN01 manufactured by AMPHENOL CORP, with NSN 5935014121787, issued under solicitation SPE7M0-26-T-013F. The item must comply with strict technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications, including ASTM D3951. The use of ozone-depleting substances in any phase of design, manufacturing, or cleaning is strictly prohibited unless prior written approval is obtained from the Contracting Officer, though this restriction does not apply to commercial items as defined by FAR 11.001 or to part-numbered-only items. The connector must be manufactured in accordance with basic drawing NR 2J622 Revision D dated 04/16/1993 and subject to configuration change management and variance request protocols. Packaging must adhere to DLA Packaging Requirements, MIL-STD-129 labeling, and if non-hazardous, commercial packaging under ASTM D3951, with all packaging and labeling explicitly marked per government directives. The item is to be delivered in one unit to Robins AFB, Georgia within five days of contract award, FOB origin, with no quantity variance allowed. Inspection and acceptance occur at destination. Shipping must be by the fastest traceable means, excluding parcel post. The required delivery date is July 17, 2026, with the contract solicitation open for response until July 31, 2026, and managed by the Department of Defense's Maritime Supply Chain ESOC Buys office, with Gerard Quinn as the point of contact.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

PLUG, END SEAL, ELECTThe contract is for a plug end seal electrical connector with NSN 5935-01-665-4187 and part number A114017, supplied by BIRDON AMERICA INC, with a quantity of one unit to be delivered within five days from the required delivery date of July 17, 2026. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including preservation method 31, dry climate control, and unit packaging code U, with marking conforming to MIL-STD-129 and palletization per DLA packaging requirements. The item is to be shipped by the fastest traceable means, excluding parcel post, to the specified military delivery address in Birmingham, Alabama, with the same markfor location and TCN W587JS61950016. The contract reference is SPE7M0-26-T-013K, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with simplified acquisition rules applying. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, under NAICS code 334417, and is managed by the Department of Defense’s Maritime Supply Chain ESO Buys office, with Gerard Quinn as the primary point of contact.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

SWITCH, RADIO FREQUEThis contract solicits two units of a radio frequency switch with part number 5985-01-463-5144, under solicitation SPE7M5-26-T-336M, for delivery to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and must meet or exceed the specifications of the cited technical data even if incomplete. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with designated verification levels or AQLs. The supplier must ensure all packaging complies with MIL-STD-2073-1E and MIL-STD-129, with special emphasis on ESD and EMI protection as mandated by MIL-PRF-81705, using only materials from qualified manufacturers listed on QPL-81705. ESD protection requires Type I barrier material and Type III wrap unless specified otherwise, and EMI protection requires Type I barrier material. Components with pins or leads must have adequate cushioning to prevent physical damage during handling and transport, and all packaging must be executed at approved ESD/EMI protective workstations. The item is subject to DOD Cybersecurity Maturity Model Certification Level 2 Self-Assessment, and the supplier is responsible for adherence to DLA packaging requirements, including proper marking with special code 39 indicating ESD-sensitive electronic device status. Delivery is due in 157 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at destination. The contract includes specific transportation instructions per DLAD Proc Note C19 and C20, with a required delivery date of November 26, 2027, and a need ship date of January 5, 2027.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

COVER, ELECTRICAL COThe contract pertains to the procurement of 10 units of a COVER, ELECTRICAL CONNECTOR identified by NSN 5935-01-589-5332 and part number 923371, manufactured by ERNI COMPONENTS INC DBA 6V439. The item must be delivered within 20 days of contract award FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. All packaging and marking must comply with DLA’s Master List of Technical and Quality Requirements, specifically referencing IP025, MIL-STD-129, and Fed-Std-313, with non-hazardous items requiring commercial packaging per ASTM D3951 unless superseded by a更高 priority DLA requirement. Palletization must adhere to RP001, and each unit pack must reflect the specified QUP of 001. The delivery is directed to the Royal Jordanian Air Force at Muwaffaq Salti AB in Jordan, with transportation governed by DLAD Proc Notes C19 and C20. The item is marked for government use under the reference W81NMJ61920043, with an original required delivery date of July 16, 2026, and is issued under solicitation SPE7M5-26-T-336L. The unit of issue is each, priced at $10.00 per unit, totaling $100.00, and the contract is assigned NAICS code 335931 with primary point of contact Margaret Smith from the Department of Defense’s Active Devices Division.

Current-Carrying Wiring Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

MICROCIRCUIT, DIGITAThe contract pertains to the procurement of three digital microcircuits with NSN 5962-01-233-4079 under solicitation SPE7M5-26-T-336N, with a delivery schedule of 222 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The item is classified as qualified under FSC 5962 and must comply with the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List as outlined in Procurement Note M01. Physical identification and marking of the bare item are required per RQ017, and packaging must adhere to DLA packaging standards. The contractor is obligated to retain complete supply chain traceability documentation in accordance with DLA Directive Procurement Note C03 from August 2016, ensuring end-to-end provenance throughout the supply chain. Government identification must be removed from any non-accepted supplies. The solicitation is open for responses until July 31, 2026, with the point of contact being Margaret Smith of the Department of Defense's Active Devices Division, based in Columbus, Ohio. The NAICS code 334413 indicates the procurement falls under semiconductor and related device manufacturing. An alternate offeror must submit a complete data package covering both the primary and alternate part specifications.

Semiconductor and Related Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

MICROCIRCUIT, LINEARThis contract is for the procurement of 26 units of a linear microcircuit, identified by NSN 5962-01-051-2101, under solicitation SPE7M5-26-T-336S, which is a total small business set-aside with a NAICS code of 334413. The item falls under Federal Supply Class 5962 for electronic microcircuits and is subject to stringent quality, traceability, and packaging requirements mandated by the Defense Logistics Agency. All suppliers must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and must be qualified under the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List for FSC 5961 and 5962. Traceability documentation must be meticulously maintained in accordance with DLA Directive Procurement Note C03 and submitted via the DLA Land and Maritime Form 918, which must be emailed to the contract administrator at least 15 days prior to delivery with all attachments compressed to under 15 MB and properly labeled. Shipment is prohibited until explicit written authorization is received, and failure to comply with documentation accuracy or timing voids payment eligibility. The contractor must also adhere to physical marking requirements per IPC/JEDEC J-STD-609 for lead finish identification on each unit pack, and conform to DLA packaging standards and bare item marking specifications. Technical data associated with this item is subject to export controls under ITAR or EAR, and access is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal authorization from DLA. Any disclosure to foreign nationals, regardless of location, is prohibited without authorization. The government will not accept surplus material, and all deliveries must be made to Columbus, Ohio within 221 days of award. Primary point of contact for inquiries is Cindy McAninch of the Department of Defense’s Active Devices Division, with all submissions and communications routed through the designated DLA systems and protocols.

Semiconductor and Related Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

FILTER, RADIO FREQUEThis contract specifies the procurement of a radio frequency interference filter with NSN 5915-00-726-7326 and part number 46438-1, supplied by ONTIC ENGINEERING & MANUFACTURING, INC., HONEYWELL INTERNATIONAL INC., and EMS DEVELOPMENT CORPORATION. The requirement is for 16 units to be delivered FOB origin within 50 days, with no tolerance for quantity variance, and inspection and acceptance occurring at the destination. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, which supersede commercial standards such as ASTM D3951. Packaging must comply with DLA’s RP001 requirements and MIL-STD-129 labeling; non-hazardous items must be commercially packaged per DLA guidance, while hazardous items must adhere to TQ requirement IP025. The delivery destination is the DLA Distribution Depot in Tinker AFB, Oklahoma, and the unit of issue is each. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment, and the supplier must remove government identification from non-accepted items. The solicitation number is SPE7M5-26-T-336P, issued by the Department of Defense’s Active Devices Division, with a response deadline of July 31, 2026, and an original delivery due date of September 12, 2027. Shipments must follow DLAD Proc Notes C19 and C20, and all documentation must align with the approved unit of issue per the DLA reference link.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 5 hours ago

DEADLINE

LIGHT EMITTING DIODThis contract specifies the procurement of a light emitting diode item identified by part number 81000-44019 from KOITO MFG CO. LTD, with the NSN 5980-01-652-7500, under solicitation SPE7M5-26-T-336Q. The item is classified as a critical application item and must comply with stringent military and federal standards including MIL-STD-130 for Item Unique Identification (IUID), MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging. Full supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03, and the item requires Federal Aviation Administration airworthiness approval. Packaging and preservation must follow DLA-specific requirements, including dry packaging methods and E5 unit containers, with no special marking applied. The delivery is FOB origin, to be inspected and accepted at destination, with a fixed quantity of 7 units and zero tolerance for variance. The required delivery date is January 3, 2027, with a 157-day allowable delivery window. All manufacturing and inspection must adhere to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required in sampling unless otherwise directed. Critical attributes are assigned verification level VII and an AQL of 0.1, major attributes level IV and AQL 1.0, and minor attributes level II and AQL 4.0. The item is subject to FAA bare item marking requirements and the contractor must remove any government identification from non-accepted supplies. The unit price is $7.00, with a total contract value of $49.00. Delivery instructions direct shipment to the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation compliance must follow DLAD Procurement Notes C19 and C20. The contract was posted on July 20, 2026, with a response deadline of July 31, 2026, and is managed by the Department of Defense’s Active Devices Division with primary point of contact Margaret Smith.

Metal Window and Door Manufacturing

POSTED

about 5 hours ago

DEADLINE

CONNECTOR BODY, RECEPTAThe contract pertains to the procurement of 18 electrical connector bodies, receptacles, identified by NSN 5935-01-323-6812, under solicitation SPE7M5-26-Q-0741, with a firm fixed price and no allowable variance in quantity. Delivery is required within 90 days after award, with FOB origin and inspection and acceptance occurring at the destination. The item must comply with specification A-A-55463A Revision A, Gen 4, and all packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The use of ozone-depleting substances in any phase of design, manufacturing, or testing is strictly prohibited unless explicitly approved in writing by the contracting officer, except for commercial items as defined in FAR 11.001 or part-numbered-only items. Packaging and handling instructions specify the use of preservative methods, materials, and unit containers as outlined in the documented standards. The item must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation procedures must follow DLAD Proc Note C19 and C20. All technical and quality requirements are incorporated by reference from the DLA Master List, with compliance based on the revision in effect at the solicitation issue date. The procurement is open to full and open competition, and the contract includes strict requirements for the removal of government identification from non-accepted supplies and physical identification of bare items.

Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

BACKSHELL, ELECTRICAThe contract specifies the procurement of 14 units of a backsHELL, ELECTRICA with NSN 5935-01-244-6487 under solicitation SPE7M5-26-Q-0742, requiring firm fixed pricing with no variance in quantity. The item is governed by strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including compliance with SAE-AS85049C and MIL-C-85049A specifications, and is subject to qualification under the Qualified Products List for connector assemblies. The use of ozone-depleting substances in any phase of manufacturing or processing is strictly prohibited without written approval from the contracting officer, and this restriction overrides all other specifications unless exempted for commercial items or part-numbered-only items. The item must be packaged in accordance with DLA Packaging Requirements, MIL-STD-129 labeling, and ASTM D3951 for non-hazardous materials, with all packaging and palletization adhering to RP001 guidelines. Delivery is required at the DLA Distribution facility in New Cumberland, Pennsylvania within 143 days after order date, with inspection and acceptance occurring at destination. The unit of issue is each, and transportation details follow DLAD procedural notes C19 and C20. The contract requires full and open competition, with no set-aside provisions, and the point of contact is Barbara Hoffmann of the Department of Defense’s Active Devices Division.

Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

ELECTRON TUBEThe contract specifies the procurement of 13 electron tubes, specifically cathode ray tubes, identified by part number A06A0788-12 and NSN 5960-00-553-5792, under solicitation SPE7M5-26-Q-0737. Delivery is required within 354 days of award, with performance taking place at Robins Air Force Base, Georgia. The item is designated as covered defense information, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue or award date. The procurement is subject to stringent configuration control through Engineering Change Proposal and variance request processes, and inspection and acceptance must occur at the origin of supply. Government identification must be removed from any non-accepted items, and the associated technical data is subject to U.S. export control regulations under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Access to this controlled data is restricted to contractors with approved JCP certification, completed DOD export control training, and explicit DLA authorization. The responsible office is the Department of Defense’s Active Devices Division, with Harold Campbell listed as the primary point of contact.

Other Electronic Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

CAPACITOR, FIXED, MICThis contract specifies the procurement of a fixed micro capacitor under NSN 5910-01-208-6473, with a requirement for 72 units to be delivered within 89 days from the contract award, FOB origin. The item must comply with stringent technical and quality requirements referenced from the DLA Master List, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. All packaging and preservation must conform to SPE7M5-26-T-336R, Section B, and MIL-DTL-39028 for capacitors. The contractor must apply specific lead finish markings per IPC/JEDEC J-STD-609 on each unit package, clearly identifying lead content, and must avoid all Class I ozone-depleting substances in manufacturing unless written approval is obtained from the contracting officer. Acceptance testing follows Army Drawing 18876-11436863, with waiver of paragraph 6 permitted only for previously accepted manufacturers, though DSCC retains the right to reinstate requirements at any time. Sampling procedures require zero non-conformances under MIL-STD-1916 or ASQ H1331 unless otherwise directed, with unspecified attributes considered major. The contract prohibits any variance without formal request and mandates removal of government identification from non-accepted items. Delivery is directed to DLA Distribution at New Cumberland, PA, with required ship date set for October 29, 2026. Unit price is $72.00 per unit, totaling $5,184.00, and all data aligns with the solicitation SPE7M5-26-T-336R issued by the Department of Defense’s Active Devices Division.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 5 hours ago

DEADLINE

Cybersecurity Compliance & CUI Safeguarding (NIST SP 800-171)The contract requires implementation and maintenance of NIST SP 800-171 controls to protect covered defense information in accordance with DFARS 252.204-7012, ensuring robust cybersecurity safeguards for Controlled Unclassified Information. This subcontract is under the Department of Defense’s Active Devices Division, with performance located in New Cumberland, Pennsylvania, and is subject to the NAICS code 541512, indicating it relates to computer systems design services. Compliance is mandatory and must be sustained throughout the contract lifecycle to meet federal cybersecurity standards for handling sensitive defense data. The solicitation was posted on July 19, 2026, with a response deadline of July 30, 2026, requiring timely submission of proposals demonstrating capability to meet all NIST SP 800-171 requirements. Contractors must be prepared to demonstrate full adherence to the 110 security controls across 14 families, including access control, audit, configuration management, and incident response, and must maintain continuous compliance through documentation, assessments, and reporting. Failure to meet these standards could result in contract termination or loss of eligibility for future DoD work.

Computer Systems Design Services

POSTED

DEADLINE