Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Electronic Assembly and Integration

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Precision Electronic Assembly and Integration requires the assembly of humidity-temperature transmitter units from a collection of subcomponents such as sensors, printed circuit boards, and housings. The work encompasses end-to-end manufacturing processes including precise component integration, calibration to ensure accuracy, functional testing under specified conditions, and a final inspection to verify that each unit meets strict form, fit, and function requirements. All units must be produced to consistent quality standards to ensure reliable performance in operational environments. This subcontract is issued under the NAICS code 334518 and is managed by the ASC COMMODITIES DIVISION within the Department of Defense. The solicitation was posted on July 15, 2026, with a response deadline of August 14, 2026. While details regarding the place of performance and point of contact are not provided, the work is expected to be performed in alignment with federal defense contracting protocols. Interested parties must submit proposals before the deadline to be considered for award, and all deliverables must comply fully with the technical and quality specifications outlined in the contract scope.

General Info

Assemble and test humidity-temperature transmitters to defense standards by August 14, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334518 - Watch, Clock, and Part ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 15

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 27 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Assemble humidity-temperature transmitter units from subcomponents including sensors, PCBs, and housings. Includes calibration, functional testing, and final inspection to meet form, fit, and function requirements.

Similar Contracts

Same NAICS industry code

Drone Sensor and Payload IntegrationThe contract seeks the integration of multispectral thermal and LiDAR sensors onto unmanned aerial vehicles to enhance capabilities in monitoring vegetation health detecting wildfires and mapping land use patterns. The work involves adapting sensor systems to operate effectively on UAV platforms ensuring precise data collection across varied environmental conditions and terrain types. The objective is to deliver actionable insights for forest management and environmental stewardship through high-resolution spatial data acquired from aerial platforms. The contract is classified as a subcontract under NAICS code 334518 and is solicited by the Government of Jamaica’s Forestry Department. Proposals must be submitted by July 27 2026 with the work expected to be performed within Jamaica. While specific performance locations and point of contact details are not provided the emphasis is on technical execution and system interoperability to support national priorities in environmental monitoring and disaster preparedness.

Forestry Department

POSTED

DEADLINE

Fixed Attenuator Supply (Electronic Component Manufacturing)The contract obligates the supplier to manufacture and deliver 14 units of a fixed attenuator identified by NSN 5985-01-106-8490, in strict adherence to approved technical drawings and quality requirements mandated by MIL-STD-1916 and ASQ Z1.4 standards. All components must meet the rigorous inspection and acceptance protocols prescribed by the Defense Logistics Agency, ensuring full compliance with Department of Defense logistics and supply chain directives. The work is classified as a subcontract under NAICS code 334518, indicating specialized electronic component manufacturing, and is managed under the DLA’s procurement framework despite the absence of a formal solicitation number or set-aside designation. Performance is governed by DLA’s overarching contractual and logistical procedures, with delivery and acceptance subject to verified conformance at the point of fulfillment.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Radio Frequency Filters (NSN: 5915002407717)

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

EMI Filter Component SupplyThe contract involves the supply of five units of an EMI Output Filter identified by NSN 1680-01-475-8461, to be delivered to a designated government location under the auspices of the Defense Logistics Agency within the Department of Defense. Each unit must comply with strict military packaging and labeling standards, including MIL-STD-129 for labeling and ASTM D3951 for packaging, ensuring durability, identification, and handling requirements are met throughout the logistics chain. Full traceability of components is mandated, confirming that every unit can be tracked from manufacturing through final delivery to meet defense supply chain integrity criteria. The contract is classified as a subcontract with a NAICS code of 334518, indicating it pertains to other guided missile and space vehicle parts and auxiliary equipment manufacturing. The solicitation was posted on July 15, 2026, and the performance location does not specify a city, state, or zip, though delivery is directed to a federal government site under DLA oversight.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Radio Frequency Filter (NSN 5915223081155)The contract entails the procurement and delivery of three units of a radio frequency filter identified by NSN 5915223081155, designed to meet rigorous military specifications for performance and reliability. The supplier is required to comply with all applicable military standards for packaging, marking, and hazardous materials handling to ensure safe transportation, storage, and operational readiness. This subcontract falls under NAICS code 334518, indicating it pertains to the manufacturing of electronic components for defense applications, and is managed by the Defense Logistics Agency under the Department of Defense. The posting date of the opportunity is July 15, 2026, and the performance location and point of contact details are not specified, but the award will be processed through the DLA’s DIBBS system with the contract identifier SPE7M126V043W.

Defense Logistics Agency

POSTED

DEADLINE

Precision Manufacturing of Volumetric MetersThe contract entails the manufacture of 75 high-accuracy volumetric meters adhering strictly to military specifications, ensuring precision and reliability for critical applications. Each unit must undergo comprehensive calibration and rigorous testing to meet performance thresholds, with all processes governed by strict quality controls. The provider is required to implement robust counterfeit parts avoidance measures and maintain full traceability throughout the supply chain, from raw materials to final assembly, ensuring component integrity and compliance with defense-grade standards. This subcontract, issued under the Defense Logistics Agency within the Department of Defense, falls under NAICS code 334518 and is targeted for performance in accordance with federal defense procurement protocols. Although the specific delivery location and point of contact are not detailed, the contract is publicly accessible through the DIBBS system, indicating its formal status and oversight. All work must be completed to satisfy military readiness requirements, with emphasis on accountability, documentation, and adherence to technical and procedural guidelines established for sensitive defense hardware.

Defense Logistics Agency

POSTED

DEADLINE

Plug Assembly Manufacturing and DeliveryThe contract requires the manufacture and delivery of 58 plug assemblies with full traceability, adherence to military specifications, and compliance with AS9100 quality management standards. Each unit must meet rigorous aerospace and defense requirements, ensuring reliability and performance under demanding operational conditions. First Article Testing must be completed and approved prior to commencement of full-scale production to verify design, process, and material conformity. The work is being performed under a subcontract issued by the Defense Logistics Agency, a component of the Department of Defense, with the North American Industry Classification System code 334518 indicating specialization in other communications equipment manufacturing. The place of performance and point of contact details are unspecified, but the contract is publicly accessible via the DIBBS system under the award number SPE4A726PC986, with a posted date of July 15, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Pressure-Thermostatic Switch (NSN: 5930-01-625-3783)The contract involves the supply and delivery of ten units of a military-specification pressure-thermostatic switch identified by NSN 5930-01-625-3783, intended for use within Department of Defense systems. The supplier must adhere to stringent defense standards including DFARS requirements for counterfeit part prevention, MIL-STD-129 packaging specifications, and full traceability throughout the supply chain to ensure authenticity and reliability. Compliance with these directives is mandatory to meet operational and security needs. The contract is structured as a subcontract under the Defense Logistics Agency, with the North American Industry Classification System code 334518 reflecting its classification within electronic component manufacturing. The award was posted on July 15, 2026, and performance is likely tied to critical defense logistics timelines, though specific delivery locations and point of contact details are not provided in the data.

Defense Logistics Agency

POSTED

DEADLINE

Electronic Filter Assembly Manufacturing and SupplyThe contract involves the manufacturing and delivery of an electronic filter assembly identified by NSN 5915016098557, specifically for use in military avionics systems. The work encompasses the full lifecycle of the component including design validation, sourcing of qualified components, precise assembly, rigorous testing to meet military performance and environmental standards, and secure packaging for military logistics. All activities must comply with applicable defense specifications and quality controls to ensure functionality and reliability under operational conditions. The subcontract is issued under the NAICS code 334518, indicating classification within electronic component manufacturing, and is administered by the Defense Logistics Agency on behalf of the Department of Defense. Performance is expected to adhere to strict defense supply chain protocols, with no specific location designated for performance, implying flexibility in manufacturing facilities as long as contractual requirements are met. The contract was posted on July 15, 2026, and is structured as a subcontract under the broader procurement framework managed by the Defense Logistics Agency. Although no set-aside type is specified, the contract is intended to support critical military hardware and must be executed with full adherence to defense acquisition regulations, including traceability of components and documentation of testing outcomes. Delivery timelines and acceptance criteria are governed by military standards, ensuring seamless integration into existing avionics platforms.

Defense Logistics Agency

POSTED

DEADLINE

Electronic Shield Supply (COTS)The contract entails the supply of 17 units of a commercial off-the-shelf electronic shielding component identified by NSN 5999-01-628-3461, which must be fully tested and fully compliant with all applicable military specifications. The components must be properly packaged and labeled according to federal and military standards to ensure traceability and readiness for deployment. Delivery is required to New Cumberland, Pennsylvania, with all terms aligned to support Department of Defense operational needs. The contract is classified as a subcontract under the NAICS code 334518 and is issued by the Defense Logistics Agency, reflecting its role in sustaining defense supply chains. The posting date indicates the solicitation was made in July 2026, with the award managed through the DLA’s procurement platform.

Defense Logistics Agency

POSTED

DEADLINE

Supply of DUPLEXER-MIXER Military Electronic ComponentsThe contract entails the manufacture or sourcing of 26 units of DUPLEXER-MIXER, identified by NSN 1285-01-611-7192, in full compliance with military specifications. Each unit must be properly packaged and delivered according to defense standards to ensure operational readiness and logistical compatibility. The work falls under NAICS code 334518, indicating it involves the production of electronic components for military applications, and is structured as a subcontract under the oversight of the Defense Logistics Agency within the Department of Defense. All deliverables are expected to meet the rigorous quality and performance requirements mandated for military electronic systems, with no specific set-aside provisions indicated. The contract was posted on July 14, 2026, and the place of performance and point of contact details are not specified in the provided information.

Defense Logistics Agency

POSTED

DEADLINE

Supply of NSN 5985-01-682-0443 (Electronic Component)The contract calls for the procurement and delivery of two units of an electronic component identified by NSN 5985-01-682-0443, which must fully comply with military specifications and federal logistics standards. The component is required to meet stringent quality and performance benchmarks applicable to defense-related applications, ensuring interoperability and reliability within military systems. This is a subcontract under the Department of Defense, managed by the MARITIME SUPPLY CHAIN, with performance expected at the designated location in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on July 14, 2026, with a firm response deadline of July 27, 2026, allowing potential vendors a two-week window to submit bids. The NAICS code 334518 indicates the industry classification for other electronic component manufacturing, underscoring the specialized nature of the component. There is no set-aside designation specified, meaning all eligible contractors may compete, and the submission must be made through the DIBBS portal using the provided RFQ link. All deliverables must adhere to federal supply chain protocols and be traceable through the DOD logistics infrastructure.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Government First Article Inspection and TestingThe contract requires the performance of a first article inspection and testing on an aircraft structural fitting to ensure full compliance with drawing 7574876. This includes detailed dimensional measurements, verification of material specifications, non-destructive testing, and the preparation of a formal inspection report. All work must demonstrate adherence to the technical requirements outlined in the drawing and meet applicable quality standards for aerospace components. The effort is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses can bid, and it is classified under NAICS code 541330, which pertains to engineering services. The solicitation was posted by the ASC Commodities Division of the Department of Defense and is open for response until July 27, 2026, with no specific location provided for performance.

Engineering Services

POSTED

about 15 hours ago

DEADLINE

Precision Manufacturing of Aircraft Structural FittingThe contract involves the precision manufacture of a critical safety aircraft structural fitting identified by Part Number S03-02-R-100, following the specifications outlined in drawing 7574876. The scope encompasses full production lifecycle activities including material sourcing, machining, heat treatment, and surface finishing, all required to meet stringent aerospace industry standards for structural integrity, durability, and safety compliance. All work must be performed in accordance with applicable aerospace quality and inspection protocols to ensure the component meets mission-critical performance requirements. This is a total small business set-aside under the SBA program as defined by FAR 19.5, with the NAICS code 332312 classifying it under forge and stamping manufacturing. The contract is issued under the Department of Defense’s ASC Commodities Division and is structured as a subcontract. Proposals must be submitted by the deadline of July 27, 2026, with the solicitation published on July 17, 2026. All manufacturing activities are expected to adhere to defense supply chain requirements, and the place of performance is not specified, implying flexibility as long as compliance and delivery obligations are met.

Fabricated Structural Metal Manufacturing

POSTED

about 15 hours ago

DEADLINE

Quality Assurance and Inspection at OriginThe contract titled Quality Assurance and Inspection at Origin requires the contractor to perform inspection and acceptance of supplies at the point of production or packaging, in strict adherence to contract clause 52.246-9008. This work is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to participate as defined by the SBA and FAR 19.5. The NAICS code 541330 identifies the scope as ranging within architectural, engineering, and related services, indicating the nature of the quality assurance activities involves technical oversight and compliance evaluation rather than direct manufacturing. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026, and is managed by the ASC Commodities Division within the Department of Defense, though specific point of contact and place of performance details are not provided. The contract emphasizes the importance of ensuring supplies meet required standards prior to shipment, with inspections conducted directly at the origin, which may include facilities across various locations. Compliance with the referenced clause mandates adherence to federal procurement quality assurance procedures, requiring detailed documentation, evaluation criteria, and acceptance protocols to be followed during inspection. The absence of explicit location or contact information suggests the contractor must be prepared to perform at any production or packaging site tied to the supply chain, and the lack of defined city or state for performance implies a potentially nationwide scope requiring logistical flexibility and readiness to deploy inspection personnel as needed. The contract is accessible through the DIBBS portal for further procedural details.

Engineering Services

POSTED

about 15 hours ago

DEADLINE

ITAR/EAR Compliance and Export-Controlled Data HandlingThe contract mandates strict compliance with ITAR and EAR regulations for all suppliers and subcontractors handling export-controlled technical data, ensuring that only authorized entities with proper registration and documentation are engaged in work involving sensitive information. All parties must demonstrate adherence to U.S. export control laws as a condition of participation, with failure to comply potentially resulting in termination or penalties. The solicitation is designated as a Total Small Business Set-Aside under the SBA program, restricting eligibility to small businesses as defined by the NAICS code 541611, which pertains to management consulting services. The award is issued by the ASC Commodities Division under the Department of Defense, with responses due by July 27, 2026, and performance expected to occur under the terms of a subcontract agreement. Participation requires proactive verification of regulatory standing and ongoing compliance monitoring for the duration of the contract.

Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

Subcontracting Plan Compliance and Small Business OutreachThe contract requires the development and execution of a federal subcontracting plan designed to ensure compliance with Department of Defense regulations and Small Business Administration guidelines for maximizing participation by disadvantaged, minority, and women-owned businesses. The goal is to meet specific targets for DBE, MBE, and WBE subcontracting as mandated by the Federal Acquisition Regulation and SBA rules, with all activities aligned to a total small business set-aside under FAR 19.5. The work focuses on strategic outreach, monitoring, documentation, and reporting to demonstrate consistent adherence to small business utilization standards throughout the contract performance period. The solicitation, issued under NAICS code 541611 for management consulting services, is administered by the ASC Commodities Division within the Department of Defense and is open for response through July 27, 2026. All subcontracting efforts must be structured to promote equitable access and measurable outcomes for certified small, minority, and women-owned businesses, with full transparency and accountability required in tracking participation. The successful contractor will be responsible for designing, implementing, and sustaining a comprehensive subcontracting strategy that aligns with federal obligations and supports the agency's commitment to small business procurement goals.

Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

Critical Safety Item (CSI) Manufacturing and SupplyThe contract involves the manufacture and delivery of Critical Safety Items specified by the U.S. Navy, with stringent requirements for sourcing controls, component traceability, and full compliance with defense-specific technical and quality standards. These items are essential to mission-critical systems and must be produced under strict regulatory oversight to ensure reliability and safety throughout their lifecycle. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, and the NAICS code 332999 indicates the work falls under other fabricated metal product manufacturing. All production and delivery activities must adhere to military specifications, and suppliers are expected to implement robust documentation and audit-ready tracking systems for every component and process step. The solicitation was posted on July 17, 2026, with a deadline for responses on July 27, 2026, and is managed by the ASC Commodities Division under the Department of Defense. There is no specified place of performance, suggesting flexibility in manufacturing locations provided all requirements are met, and no point of contact is listed, implying inquiries must be directed through the official DIBBS portal referenced in the link. The nature of the work demands a high level of precision and accountability, with failure to meet traceability or compliance standards likely resulting in disqualification or contract termination. Suppliers must be prepared to demonstrate proven capability in handling sensitive defense components and maintaining data integrity across the supply chain.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

Quality Inspection and Product Verification TestingThe contract requires the performance of in-process and final inspections on bushing assemblies in accordance with MIL-STD-1916 or ASQ H1331 standards, ensuring compliance with rigorous quality and verification protocols. The contractor is responsible for generating accurate test reports and providing full support to Government acceptance activities, demonstrating consistent adherence to defense-grade quality requirements throughout the production lifecycle. This work is critical to validating the integrity and functionality of components used in defense systems. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 541330, and issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026. While specific location details are not provided, the place of performance is tied to defense operations under the DLA umbrella, and all submissions must be made through the designated DIBBS portal. The contract emphasizes the need for qualified small business entities capable of delivering precise inspection services under strict military specifications.

Engineering Services

POSTED

about 15 hours ago

DEADLINE

Domestic and International Freight Logistics (U.S.-Flag Vessel Compliance)The contract requires the arrangement of domestic and international freight logistics for the shipment of bushing assemblies to locations within the continental United States, with strict adherence to U.S.-flag vessel requirements mandated by the Cargo Preference Act for all ocean freight portions. This ensures compliance with federal regulations that prioritize the use of American-owned and flagged vessels for the transportation of government cargo. The solicitation is structured as a subcontract under a Total Small Business Set-Aside designation, exclusively available to small businesses certified by the Small Business Administration, and is classified under NAICS code 483112, which pertains to foreign ocean transportation. The opportunity was posted on July 17, 2026, with a response deadline of July 27, 2026, and is overseen by the ASC Commodities Division of the Department of Defense, with performance tied to U.S. domestic destinations. The requirement emphasizes logistical precision, regulatory compliance, and small business participation in fulfilling defense-related supply chain needs.

Deep Sea Passenger Transportation

POSTED

about 15 hours ago

DEADLINE

Supply Chain Traceability and Documentation ManagementThe contract requires the maintenance of fully auditable records to ensure complete traceability of material origin, certifications, inspections, and adherence to all Government traceability mandates, specifically in compliance with DFARS requirements. All documentation must support transparency and accountability throughout the supply chain, enabling verification of source materials and compliance with defense contracting standards. The contractor must implement systems and procedures capable of sustaining rigorous audit readiness and meeting every contractual obligation related to documentation integrity and regulatory compliance. This is a small business total set-aside subcontract under NAICS code 541611, issued by the Department of Defense’s ASC Commodities Division. Responses are due by July 27, 2026, and performance is expected to align with federal defense supply chain protocols. The contract emphasizes strict adherence to traceability standards and requires proven capability in managing complex documentation systems under federal oversight. While specific location details are not provided, all work must satisfy DoD requirements for origin verification and material accountability.

Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

Packaging, Marking, and Labeling ServicesThe contract seeks qualified small businesses to provide military-compliant packaging, preservation, and labeling services for bushing assemblies, adhering strictly to DLA and MIL-STD-129 standards. Essential requirements include accurate barcode application, application of special handling labels, and full compliance with defense logistics protocols to ensure traceability, durability, and readiness for military distribution. The work must be performed in accordance with federal regulations governing packaging integrity and labeling accuracy to support the Department of Defense’s supply chain standards. This is a total small business set-aside under NAICS code 493190, restricted exclusively to small businesses as defined by the SBA, and is issued as a subcontract by the ASC Commodities Division within the Department of Defense. Responses are due by July 27, 2026, with the solicitation posted on July 17, 2026, and all work expected to align with DLA’s logistical demands for defense components. The place of performance and point of contact details are not specified, but all proposals must demonstrate readiness to meet stringent military packaging and documentation requirements without deviation.

Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

Precision Machining of Bushing Assembly (NSN 5365-01-541-2220)The contract pertains to the manufacture and delivery of precision bushing assemblies identified by NSN 5365-01-541-2220, requiring strict adherence to military specifications throughout production. Work includes CNC machining to exact tolerances, comprehensive inspection processes, and full compliance with traceability and packaging standards mandated for defense applications. The contract is structured as a subcontract under a total small business set-aside, reserved exclusively for small businesses as defined by the SBA under FAR 19.5, with the NAICS code 332710 applicable to forged and stamped metal product manufacturing. The opportunity was posted on July 17, 2026, with responses due by July 27, 2026, and is issued by the ASC Commodities Division under the Department of Defense. Performance is expected to occur at an undefined location, and all deliverables must meet federal defense supply chain requirements, ensuring readiness for military use.

POSTED

about 15 hours ago

DEADLINE

Small Business and DBE/MBE/WBE Subcontracting ParticipationThis contract opportunity is designed to facilitate participation by small, disadvantaged, minority-owned, and women-owned businesses in supply or compliance roles under a prime contract managed by the ASC Commodities Division within the Department of Defense. The solicitation, identified by the NAICS code 335931, focuses on subcontracting engagement and does not specify a set-aside type, meaning it is open to qualified entities meeting ownership and size criteria without formal classification under a specific program. Interested businesses must respond by the deadline of August 16, 2026, to be considered for inclusion in the workforce supporting the prime contract's delivery and compliance requirements. The work will be performed without a specified geographic location, indicating potential flexibility in performance sites. Participation is facilitated through the DIBBS platform, where full details and submission protocols can be accessed.

Current-Carrying Wiring Device Manufacturing

POSTED

about 15 hours ago

DEADLINE