Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Fabrication of Moderator, CIC Top

Active

Federal

Response Deadline11/23/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the precision fabrication of 15 units of Moderator, CIC Top components (NIIN 013386238) for prime contractors supporting Navsup Weapon Systems Support Mech projects. The manufacturer must utilize precision machining to produce parts in strict accordance with TDP Version 002 and DD Form 1423. To meet Reactor Plant Clean standards, the contractor is required to implement rigorous cleanliness controls as specified by MIL-STD-767 and MIL-STD-2041. Compliance with strict regulatory and security frameworks is mandatory, including ITAR and EAR regulations for the handling of export-controlled data and CMMC cybersecurity certification. The project falls under NAICS code 332710 and is managed under the Department of Defense. Interested parties must adhere to the response deadline of November 23, 2026.

General Info

Fabricate 15 Moderator CIC Top components per TDP 002 by November 23, 2026.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

332710 - Machine Shops

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010425QBT83.

The full solicitation package (9 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

MODERATOR,CIC TOP

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 21

subcontract

Response DeadlineNov 23

Submission deadline

Response Deadline

11/23/2026, 08:30:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures Moderator, CIC Top components for prime contractors on Navsup Weapon Systems Support Mech projects. Fabricates parts per TDP Version 002 and DD Form 1423 (Exhibit A) using precision machining. Implements cleanliness controls per MIL-STD-767 and MIL-STD-2041 for Reactor Plant Clean standards. Requires ITAR/EAR compliance for export-controlled data and CMMC cybersecurity certification. Delivers 15 units of NIIN 013386238.

Similar Contracts

Same NAICS industry code

Precision Machined Titanium Ball for 3" Ball ValveThis subcontract through the Department of Defense and Navsup Weapon Systems Support Mech involves the manufacture and supply of three high-precision titanium balls for 3 inch ball valves used in Naval Sea Systems Command shipboard projects. The contractor must utilize centrifugal casting for 6AL-4V titanium according to ASTM-B367 Grade C-5 standards and perform precision grinding based on drawing DN330635C5/C9. Quality assurance requires either dye penetrant inspection or hydrostatic testing at 150 percent pressure for 30 minutes, with final delivery including full analysis reports. To be eligible for this project, the provider must maintain ISO-9001 certification and hold a Confidential security clearance. The opportunity is categorized under NAICS code 332710, with a response deadline set for November 20, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Precision Manufacturing of Torlon Valve SeatsThis subcontract involves the precision machining and molding of valve seats, identified by NIIN 015404194, to support prime contractors on projects for the NAVSUP Weapon Systems Support under the Department of Defense. The selected provider will manufacture parts using Torlon Type 4503 compression molded material in strict accordance with Naval Sea Systems Command drawings DN330671C11, DN330671C12, DN330671C6, EB-4147, and 6408790. To ensure quality and technical standards, the contractor must maintain ISO 9001 certification and adhere to MIL-STD-792 F compliance. The final deliverables for this engagement include the finished valve seats along with a complete OQE package. The opportunity is categorized under NAICS code 332710, with a response deadline set for November 20, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Precision Ball Valve Component ManufacturingThis subcontract involves the precision manufacturing of the ball component for a 2.5-inch ball valve intended for prime contractors on Navsup Weapon Systems Support Mechanicsburg projects. The scope of work includes precision machining, grinding, and polishing in strict accordance with Naval Sea System Command Drawing 801-6408784. To ensure operational integrity, all materials must be certified to SAE-AMS-6931, and the manufacturer must maintain ISO 9001 or SAE AS9100 quality management systems. The project mandates compliance with Special Emphasis Level I quality assurance standards. The final deliverables consist of precision-machined valve balls accompanied by full material certifications. This Department of Defense effort falls under NAICS code 332710, with a response deadline set for November 20, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Precision Machining of Ball Valve Ball and SeatsThis subcontract involves the precision machining and fabrication of high-precision ball and matching seats for the Department of Defense, specifically supporting NAVSUP Weapon Systems Support projects. The contractor is responsible for delivering completed parts kits that adhere strictly to Naval Sea Systems Command drawings, utilizing Torlon 4503 and QQ-N-286 materials. To qualify, the provider must utilize high-precision CNC machining equipment and maintain ISO-9001 compliance. The work is subject to Critical Safety Item standards and must be performed under a DO-A3 rating. The solicitation was posted on October 21, 2026, with a response deadline of November 20, 2026, falling under NAICS code 332710.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Precision Machining and Testing of Titanium Valve BallsThis subcontract involves the precision fabrication, machining, and high-pressure testing of titanium valve balls for shipboard system projects under the Navsup Weapon Systems Support Mechanicsburg. The components must be manufactured using either SAE-AMS-6931 or 6AL-4V ASTM-B367 Grade C-5 titanium alloy. Quality assurance requirements include hydrostatic testing at 4500 PSI for 30 minutes or Dye Penetrant Inspection according to T9074 standards. To be eligible, contractors must hold ISO-9001 or MIL-I-45208 certification to ensure the delivery of finished, tested, and certified products. This opportunity falls under NAICS code 332710 and is managed by the Department of Defense. The response deadline for this requirement is November 20, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Precision Fabrication and Manufacturing of BI FRNT PANEL BARThis subcontract involves the precision fabrication and manufacturing of BI FRNT PANEL BARs for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The manufacturer is required to produce components in strict accordance with L3Harris Maritime Power specifications, specifically drawing 900-36766 and TDP Version No. 001, utilizing specialized metal fabrication equipment to ensure all strict tolerances are met. Key compliance requirements for this contract include mandatory CMMC cybersecurity standards and mercury-free certification. The successful contractor is responsible for the delivery of the finished hardware along with a formal Certificate of Compliance. The opportunity was posted on October 21, 2026, with a response deadline of November 20, 2026, falling under NAICS code 332710.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Precision Manufacture of Drop Bar AssemblyThis subcontract involves the precision manufacture of one Drop Bar Assembly for the USS MOMSEN (DDG 92) under DLA Mechanicsburg projects. The contractor is required to fabricate the part according to OEM design Cage Code 53711 and reference 6322384 per TDP Version 003, with marking performed in accordance with MIL-STD-130, REV N. The project necessitates the use of precision machining equipment and strict adherence to DFARS 252.204-7012 cybersecurity compliance. The final deliverable is one completed and marked Drop Bar Assembly. The response deadline for this opportunity is January 19, 2027.

SPRMM1 DLA Mechanicsburg

POSTED

about 5 hours ago

DEADLINE

Manufacture of Shoe Set, Counter CLThis subcontract involves the manufacture of precision Shoe Set, Counter CL components for prime contractors supporting DLA Mechanicsburg aircraft projects. The contractor is responsible for fabricating parts according to Cage Code 75333, reference number 469118-PC 37X39, and TDP Version No. 004. All deliverables must be produced using precision machining equipment and materials that comply with Buy American requirements. The scope of work includes performing marking in accordance with MIL-STD-130 and conducting plant-of-origin quality inspections. The final delivery consists of the finished Shoe Set, Counter CL under NSN 7HH 2010-01-267-4906. This project falls under NAICS code 332710 and is managed by the Department of Defense through the SPRMM1 DLA Mechanicsburg agency.

SPRMM1 DLA Mechanicsburg

POSTED

about 5 hours ago

DEADLINE

in about 1 month

TAHEF 542 System Components

Solicitation # N6660426Q0430

The Naval Undersea Warfare Center Division, Newport is soliciting quotes for the manufacture and delivery of custom build-to-print support materials for government infrastructure upgrades under solicitation N6660426Q0430. The requirement consists of a Capstan Drive Assembly and a Stowage Drum/Level Wind Assembly, comprising various components including drive drums, hub bodies, outlet guides, and sensor mounts. This is an unrestricted procurement under NAICS code 332710, and the government intends to award a single Firm Fixed Price purchase order based on the lowest price technically acceptable evaluation method. Delivery is required F.O.B. Destination to Naval Station Newport, Rhode Island. Technical acceptability requires the submission of a Welding Certification Letter or a detailed plan to achieve qualification during performance. Contractors must adhere to strict quality and marking standards, including MIL-STD-130 for identification and specific priming and painting requirements. All items with a unit acquisition cost of 5,000 dollars or more require a unique item identifier. Security compliance is critical, as offerors must provide CMMC unique identifiers and have a NIST SP 800-171 DoD Assessment score posted in the Supplier Performance Risk System to receive drawings. Payment will be processed electronically via Wide Area Workflow within the Procurement Integrated Enterprise Environment.

Nuwc Division Newport

POSTED

about 5 hours ago

DEADLINE

Flywheel Resurfacing ServicesThis subcontract for Flywheel Resurfacing Services supports prime contractors on projects for the Earle C. Clements Job Corps Center. The scope of work involves precision machining to resurface tractor flywheels using a lathe or specialized resurfacing machine. The primary objective is to create a flat contact surface for new clutch components while strictly adhering to manufacturer surface tolerances to ensure the flywheel is ready for re-installation. The opportunity is designated as an SBA set-aside, making it available to Small Businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. The project falls under NAICS code 332710. Interested parties must respond by the deadline of November 3, 2026.

Earle C. Clements Job Corps Center

POSTED

about 11 hours ago

DEADLINE

Custom Component Fabrication for BAM Range Phase IIThis subcontract involves the fabrication of specialized components for prime contractors working on the Ballistic Aero-Optics and Materials (BAM) Range Phase II expansion for the Texas A&M University System. The scope of work requires the use of precision machining and metal fabrication to ensure all components meet strict ballistic aero-optics range standards. The completed fabricated components are to be delivered to the Texas A&M RELLIS Campus located in Bryan, Texas. This opportunity falls under NAICS code 332710, with a response deadline set for November 3, 2026.

Texas A&M University System

POSTED

about 17 hours ago

DEADLINE

Fabrication of Test Section AssembliesThis subcontract involves the precision fabrication of test section assemblies for prime contractors supporting the Texas A&M University BAM Range Phase II projects. The scope of work requires the use of CNC machining and precision assembly jigs to produce components specifically designed for materials testing and aero-optics, ensuring all deliverables adhere to Specialized Vessel Fabrication Specifications. The opportunity is categorized under NAICS code 332710 and is managed by Texas A&M University. Interested parties must note the response deadline of November 3, 2026, with the project focusing on the delivery of completed high-precision assemblies.

Texas A&M University

POSTED

about 24 hours ago

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Navsup Weapon Systems Support Mech projects within the Department of Defense. The scope of work involves providing specialized packaging and physical identification, ensuring all assets are marked according to MIL-STD-130 and packaged in compliance with MIL-STD-2073 and MIL-DTL-197. The contractor must utilize industrial marking equipment and adhere to POP-certified hazardous materials packaging standards as mandated by 49 CFR and FED-STD 313. The ultimate objective is to deliver packaged assets that are fully prepared for FOB Origin shipment through the Navy's CAV system. This opportunity falls under NAICS code 561990, with a response deadline set for November 4, 2026.

All Other Support Services

POSTED

about 5 hours ago

DEADLINE

Supply of Replacement Parts for Thrust Shoe w/InstrThis subcontract involves the supply of OEM or approved replacement parts, seals, and hardware for the Department of Defense under the Navsup Weapon Systems Support Mech agency. The scope specifically focuses on providing components for Thrust Shoe w/Instr that meet Reference Number 482480-008 and NSN 016233028 specifications. To ensure quality and authenticity, the provider must submit proof of authorized distributor status from the original manufacturer. The contract mandates a strict delivery schedule with a certified replacement component Repair Turnaround Time of 23 days. Interested parties must respond by November 4, 2026, under NAICS code 423840.

Industrial Supplies Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Repair and Modification of Thrust Shoe w/InstrThis subcontract involves the teardown, evaluation, repair, and modification of Thrust Shoe w/Instr (NSN 016233028) for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The selected provider must be an authorized distributor of the original manufacturer and is required to disassemble and assess assets using precision tooling and technical orders in accordance with CAGE 75333 and Ref No. 482480-008. The primary objective is the delivery of a fully repaired and modified asset that meets all specified functional requirements. This opportunity falls under NAICS code 811210, with a response deadline set for November 4, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 5 hours ago

DEADLINE

Non-Destructive Testing (NDT) and Hydrostatic CertificationThis subcontract, issued by the Department of Defense under the Navsup Weapon Systems Support Mech, involves providing specialized non-destructive testing and hydrostatic certification for critical safety items on Naval Sea Systems Command projects. The scope of work includes performing hydrostatic testing at 150 percent pressure, dye penetrant inspections, and quantitative chemical and mechanical analysis of titanium alloys to ensure structural integrity and safety compliance. Qualified contractors must hold a Confidential security clearance and possess ASNT Level II or III certifications to perform these technical evaluations. The primary deliverables for this engagement are certified test reports and detailed analysis data. Interested parties should note the response deadline of November 20, 2026, for this opportunity categorized under NAICS code 541380.

Testing Laboratories and Services

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Torlon 4503 Valve SeatsThis subcontract involves the fabrication and supply of six high-performance polymer mating seats for prime contractors supporting Naval Sea Systems Command shipboard projects. The components must be manufactured from Torlon 4503 polymer in strict accordance with Electric Boat Specification 4147 and drawing specifications DN330635C5 and DN330635C9. To qualify for this engagement, the provider must maintain Confidential clearance and provide Mercury-Free certification. Final delivery of the mating seats requires the inclusion of Certificates of Compliance to ensure all technical and quality standards are met.

All Other Plastics Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports prime contractors on Navsup Weapon Systems Support Mech projects for the Department of Defense. The scope of work involves the specialized packaging of repaired electronic assemblies, specifically requiring the use of anti-static shielding and cushioning in strict accordance with MIL-STD-2073 standards. The service provider is responsible for the secure delivery of Circuit Card Assemblies to Ship To W25G1U and the shipment of items to the DLA Distribution DDSD New Cumberland Facility. This requirement falls under NAICS code 488510, with a response deadline set for November 30, 2026.

Freight Transportation Arrangement

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Electronic Component Supplier (Circuit Card Parts)This subcontract, titled Electronic Component Supplier (Circuit Card Parts), involves the procurement of capacitors, resistors, integrated circuits, and specialized hardware to support prime contractors on Navsup Weapon Systems Support Mech projects for the Department of Defense. The supplier is responsible for sourcing components that strictly adhere to original manufacturer specifications, specifically for NIIN 015547943, and must ensure all items are delivered directly to the designated repair facility. To maintain quality and security, the contractor must provide full traceability documentation and certifications of conformance to mitigate the risk of counterfeit parts. Additionally, all provided components must comply with the Buy American Act. This opportunity falls under NAICS code 423610, with a response deadline set for November 30, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Circuit Card Assembly Repair and ModificationThis subcontract for the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves the teardown, evaluation, repair, and modification of Circuit Card Assemblies. The primary objective is to restore these items to A condition in strict accordance with provided technical orders and drawings. To ensure quality and compliance, the contractor must maintain ISO 9001 certification and utilize ESD-safe workstations meeting MIL-STD-1686 standards. Additionally, all calibration equipment must be compliant with NCSL Z540 .3, and final products must adhere to MIL-STD-130 marking requirements. The response deadline for this opportunity is November 30, 2026.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 5 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and MarkingThis subcontract opportunity with the Department of Defense for Navsup Weapon Systems Support Mech involves providing specialized physical identification, marking, and packaging services for prime contractors. The selected provider must ensure all assets are identified according to MIL-STD-130, REV N and packaged in compliance with MIL-STD-2073, utilizing military-grade containers and anti-static bagging to deliver transport-ready assets. Qualified candidates must demonstrate proven experience in MIL-SPEC packaging. The solicitation was posted on October 21, 2026, with a response deadline of November 4, 2026, at 8:30 PM. The project falls under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

about 5 hours ago

DEADLINE

Computer Subassembly Replacement Parts SupplierThis subcontract opportunity with the Department of Defense, specifically for Navsup Weapon Systems Support Mech, seeks a supplier to provide electronic components, integrated circuits, and hardware necessary for the repair of Computer Subassembly NIIN 015451903. The selected provider must source parts from original equipment manufacturers or approved equivalents, ensuring all deliverables strictly adhere to original manufacturer specifications and are provided as certified replacement parts. To qualify, suppliers must provide proof of their status as an authorized distributor. This requirement falls under NAICS code 423610. Interested parties must submit their responses by the deadline of November 4, 2026, following the posting date of October 21, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Computer Subassembly Repair and OverhaulThis subcontract for the Department of Defense, specifically under Navsup Weapon Systems Support Mech, involves the technical repair, evaluation, and modification of Computer Subassembly NIIN 015451903. The selected contractor will be responsible for executing complete teardowns, failure analyses, and repairs in strict accordance with original manufacturer specifications, technical orders, and engineering drawings to deliver a fully functional unit. The project requires the use of specialized testing equipment and mandatory compliance with DFARS 252.204-7012 standards. This opportunity falls under NAICS code 811219, with a response deadline set for November 4, 2026.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 5 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS