Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Fabrication of Segment 7 Stern

Active

Federal

Response Deadline10/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the precision fabrication of one validated Segment 7 Stern for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The manufacturing process must strictly adhere to Drawing NR 53711 7401551 Rev D, TDP Rev A Gen 1, and NAVSEA PMS-377 Project Peculiar Documents. A critical requirement of the production is the absolute prohibition of mercury in all components. To be eligible, the contractor must be an approved source via NAVSEA PMS-377 or successfully complete a validation process through the Coastal Systems Station. The work is categorized under NAICS code 332721 and is to be performed in Virginia Beach. The solicitation was posted on October 8, 2026, with a response deadline of October 19, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

332721 - Precision Turned Product Manufacturing

Place of Performance

VIRGINIA BEACH, VA, 23459-3018, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-T-0543.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEGMENT 7 STERN

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 8

subcontract

Response DeadlineOct 19

Submission deadline

Response Deadline

10/19/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricates Segment 7 Sterns for prime contractors on DLA Weapons Support Fluid Handling Division projects. Manufactures components per Drawing NR 53711 7401551 Rev D and TDP Rev A Gen 1, adhering to NAVSEA PMS-377 Project Peculiar Documents. Requires precision machining and strict prohibition of mercury. Must be an approved source via NAVSEA PMS-377 or complete validation via Coastal Systems Station. Delivers one validated Segment 7 Stern.

Similar Contracts

Same NAICS industry code

Precision Machined Pin-Rivet FabricationThis subcontract for Precision Machined Pin-Rivet Fabrication involves the production of five specialized pin-rivets, identified by NSN 5320-01-147-5381, for the DLA Weapons Support ASC Commodities Division. The manufacturer must utilize traditional subtractive or formative manufacturing processes, as additive manufacturing is strictly prohibited. All materials used must be free of hexavalent chromium and fully compliant with the Buy American Act and the Berry Amendment. To ensure quality and compliance, the contractor is required to maintain either SAE AS9003 or ISO 9001 quality systems. The project is categorized under NAICS code 332721, with performance taking place in New Cumberland. Interested parties must respond by October 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supplier of Loop Clamps (NSN 5340006854859)This subcontract involves the manufacture or procurement of 506 loop clamps to support prime contractors for the DLA Weapons Support Land Supply Chain. The required units must be compatible with part numbers from Umpco Inc, TA Aerospace Co, or Transdigm Inc, specifically adhering to NSN 5340006854859 and the DLA Master List RA001. The contractor is responsible for ensuring all items meet MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. Delivery of the 506 units is designated as FOB Origin to the DLA Distribution Depot Oklahoma located at Tinker AFB.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Flat Washer ManufacturingThis subcontract involves the manufacture of 195 precision flat washers for prime contractors supporting the DLA Weapons Support ASC Commodities Division. Production must strictly adhere to Basic Drawing 18876 13679774 Revision A and Reference Drawing 18876 13679774-2. The final products must be marked according to MIL-STD-129 and MIL-STD-130N standards and packaged in compliance with ASTM D3951. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 quality systems and meet CMMC Level 2 requirements. Additionally, compliance with the US/Canada Joint Certification Program for export control is mandatory. The place of performance is located in Tracy, California, and the response deadline for this opportunity is October 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Self-Locking Double Hexagon Nuts (NSN 5310-01-104-0526)This subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, requires the manufacture or procurement of 1,761 self-locking double hexagon nuts conforming to NSN 5310-01-104-0526 specifications. The project is designated as a Total Small Business Set-Aside under NAICS code 332721 and mandates strict adherence to the Buy American Act and the Berry Amendment. All units must be produced using precision machining equipment and delivered FOB Origin to DLA Distribution in Warner Robins, Georgia. Compliance standards include packaging according to ASTM D3951 and marking in accordance with MIL-STD-129. Interested parties must have submitted responses by the October 16, 2026, deadline to support prime contractors delivering on DLA supply contracts.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Flat Washers (NSN 5310014239039)This subcontract involves the supply of four specialized flat washers for the Department of Defense, specifically supporting DLA Weapons Support Aviation Supply Chain projects. The hardware must strictly match NSN 5310014239039 and Part Number 998-1168-1, with a critical requirement that no hexavalent chromium is used in the manufacturing process. Performance will take place at Hill AFB, with delivery terms set as FOB Destination. Compliance is mandatory regarding the Berry Amendment and specific quality sampling standards per MIL-STD-1916 or ASQ H1331. Additionally, the contractor must ensure that materials are packaged according to ASTM D3951 and RP001, with all marking adhering to MIL-STD-129. The solicitation was posted on October 8, 2026, with a response deadline of October 16, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Manufacture and Supply of Headless Shoulder PinsThis subcontract involves the manufacture and supply of precision-machined headless shoulder pins for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The contractor is required to produce parts according to NSN 5315014252422 specifications using CNC lathes or grinders to ensure exact tolerances. The scope of work includes the delivery of two units that must pass a destination inspection. All items must be packaged in accordance with MIL-STD-2073-1E standards. The opportunity falls under NAICS code 332721, with a response deadline set for October 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture and Supply of Straight Headle PinsThis subcontract involves the manufacture and supply of one Straight Headle Pin, identified by NSN 5315-01-677-0044, for the DLA Weapons Support ASC Commodities Division. The selected contractor must perform precision machining in accordance with NSN specifications and the DLA Master List of Technical and Quality Requirements. All items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards, with final delivery to Mechanicsburg, Pennsylvania. To be eligible, contractors must maintain JCP certification and CMMC Level 2 compliance, while ensuring all work adheres to the Buy American Act. This opportunity falls under NAICS code 332721 and requires responses by October 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Manufacture of Aluminum Tube ElbowsThis subcontract involves the precision manufacture and supply of 258 aluminum alloy tube elbows, identified by NSN 4730001735160, for the DLA Weapons Support Fluid Handling Division. The contractor is responsible for fabricating these components in accordance with SAE AS21908F and SAE AS18280H standards, with a strict prohibition on the use of mercury or Class I ozone-depleting chemicals. Performance will take place at Tinker AFB. To qualify, the manufacturer must be accredited on the PRI QML or QPL and possess the necessary precision tube bending and machining equipment. The solicitation was posted on October 8, 2026, with a response deadline of October 19, 2026. This project falls under NAICS code 332721 and supports prime contractors within the Department of Defense.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacturing of Flat Washer (PN: 42252D33 / NSN: 5310-01-465-1399)This subcontract involves the precision manufacturing of flat washers, specifically part number 42252D33, for prime contractors supporting DLA Weapons Support ASC projects. The fabrication process must adhere to the DLA Master List and Triumph Gear Systems Inc. specifications, requiring the use of specialized precision machining or stamping equipment to deliver finished and labeled components. The contract mandates strict adherence to quality and logistics standards, including quality sampling per MIL-STD-1916 or ASQ H1331, packaging according to ASTM D3951 and RP001, and marking per MIL-STD-129 and RQ017. This Department of Defense requirement falls under NAICS code 332721 and is managed by the DLA Weapons Support ASC Supplier OE and AF Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Manufacturing of Quick Release Pins (MS17987C306)This subcontract involves the precision manufacturing of 107 quick release pins for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The pins must be fabricated according to NASM17987 Revision 2 and NAS1332 Revision 9 specifications using subtractive methods such as precision CNC machining or Swiss-turning. Additive manufacturing is strictly prohibited for this project. To qualify, the manufacturer must maintain an ISO 9001 or SAE AS9003 quality system and ensure all materials are compliant with the Berry Amendment and the Buy American Act. The performance of this contract is centered in New Cumberland, Pennsylvania, with a response deadline set for October 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturer of Metal Seal Rings (NSN 5330-01-723-4613)This subcontract opportunity is for the manufacture of 48 precision metal seal rings under NSN 5330-01-723-4613 to support the DLA Weapons Support Land Supplier Opns Vehicle Spt. The selected provider will utilize precision machining and forming equipment to fabricate the rings, ensuring all products are asbestos-free and strictly compliant with the Buy American Act and the Berry Amendment. Additionally, all items must feature identification marking in accordance with MIL-STD-130N. The project is designated as a Total Small Business Set-Aside under NAICS code 332721 and will be performed in New Cumberland. Interested parties must submit their responses by October 19, 2026. This requirement is managed by the Department of Defense to ensure critical vehicle support components meet rigorous military specifications.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Orifice, 10B; 0.009This subcontract, issued by the Department of Defense for the DLA Fleet Readiness Center Southeast, requires the supply of 21 precision-manufactured critical application orifices, specifically Part Number 152B2031-3. The project is designated as a Total Small Business Set-Aside under NAICS code 332721. The contractor is responsible for either manufacturing or sourcing the components in accordance with MIL-STD-1916 or ASQ H1331 quality sampling standards. To ensure compliance, the provider must maintain ISO 9001 certification and adhere to strict packaging and labeling requirements per ASTM D3951, RP001, MIL-STD-129, and MIL-STD-130N(1). The solicitation was posted on October 8, 2026, with a response deadline of October 18, 2026.

DLA FLEET READINESS CENTER SOUTHEAST

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Supplier of Air Breathing Hoses (NSN 4720-01-688-4449)This subcontract involves the manufacture or procurement of 13 specialized air breathing hoses, identified by NSN 4720-01-688-4449, for the DLA Weapons Support Fluid Handling Division. The hoses must feature a 120-month shelf life and adhere to strict packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. Delivery is required FOB Origin to the DLA Distribution DDSP in New Cumberland, Pennsylvania. To be eligible, the supplier must maintain CMMC Level 2 certification and ensure full compliance with ITAR, EAR, and DFARS 252.204-7012 regulations. The project falls under NAICS code 326220, with a response deadline set for October 19, 2026.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

Aerospace Component Finishing and PlatingThis subcontract, titled Aerospace Component Finishing and Plating, is issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division. The project requires the application of aerospace-approved surface treatments and plating, specifically anodizing or passivating, for machined shafts according to P/N 257733 specifications. The selected contractor is responsible for delivering finished coated shaft components and must perform rigorous quality control, including surface roughness testing and coating thickness verification. A critical requirement for this contract is that the provider must hold NADCAP accreditation for special processes. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813. Interested parties must submit their responses by October 16, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Aerospace Grade Raw Material SupplyThis subcontract, issued by the Department of Defense for the DLA Weapons Support Fluid Handling Division, involves the supply of certified aerospace-grade raw metal stock or forged blanks. The scope of work requires the delivery of certified raw materials for 10 shaft units, with a strict emphasis on supply chain traceability. To meet these standards, the provider must furnish Material Test Reports and Certificates of Conformance in accordance with C03 requirements and ensure full compliance with DFARS Specialty Metals clauses. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 331210. Interested parties must have submitted their responses by the deadline of October 16, 2026. This procurement ensures that prime contractors receive high-specification materials that meet rigorous aerospace and defense industry certifications.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

DEADLINE

Precision Manufacturing of Shaft SubassemblyThis subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, involves the precision machining and assembly of 10 shaft subassemblies for Eaton Aerospace part number 257733. The scope of work requires the use of CNC turning, milling, and grinding on aerospace-grade alloys to meet strict OEM specifications, with quality validation performed via CMM. The opportunity is designated as a total small business set-aside under NAICS code 336413. To be eligible, contractors must comply with the DLA Master List of Technical and Quality Requirements and complete a CMMC Level 2 self-assessment. The response deadline for this requirement is October 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Precision Surface Coating and PlatingThis subcontract for Precision Surface Coating and Plating supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The selected provider will apply specialized surface coatings and plating for prime contractors, ensuring all components meet a 16 RMS surface finish and adhere to strict corrosion and wear specifications. To maintain environmental standards, all plating processes must be performed without the use of Class I Ozone Depleting Chemicals. Eligible contractors must hold US/Canada Joint Certification Program certification and maintain full compliance with ITAR and EAR regulations. This opportunity falls under NAICS code 332813, with a response deadline set for October 16, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

NDT Inspection and Material CertificationThis subcontract for the DLA Weapons Support Fluid Handling Division involves providing non-destructive testing and material validation services for prime contractors. The scope of work includes performing magnetic particle, liquid penetrant, radiographic, and pressure leakage testing to ensure material integrity. The selected provider is responsible for delivering detailed inspection reports and material certifications. To qualify, contractors must maintain US/Canada Joint Certification Program certification and ensure full compliance with ITAR and EAR regulations. Technical requirements specify the use of Level II or III NDT technicians. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense.

Testing Laboratories and Services

POSTED

DEADLINE

Heat Treating and Surface Hardness ServicesThis subcontract for Heat Treating and Surface Hardness Services supports prime contractors on projects for the Department of Defense DLA Weapons Support Fluid Handling Division. The scope of work involves providing specialized thermal processing for metal components, specifically focusing on heat treating, stress relieving, and shot peening, as well as performing Rockwell surface hardness testing. All delivered components must be accompanied by the appropriate process certifications to ensure quality and compliance. To be eligible for this contract, providers must maintain US/Canada Joint Certification Program certification and strictly adhere to ITAR and EAR compliance regulations. The opportunity is categorized under NAICS code 332813, with a response deadline set for October 16, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Precision Metal Tube Assembly FabricationThis subcontract involves the fabrication of seven high-precision metal tube assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The project requires extreme technical precision, with machining and forming specifications demanding tolerances of .001 inch or less and surface finishes of 16 RMS or less. To be eligible, contractors must maintain rigorous industry certifications and security clearances, including SAE AS9100, US/Canada Joint Certification Program certification, and CMMC Level 2. Additionally, the provider must hold ITAR/EAR authorization to handle the sensitive nature of these defense components.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

HOSE, AIR BREATHING

Solicitation # SPE7M4-27-T-0591

Solicitation SPE7M4-27-T-0591 is a fixed-price contract issued by the DLA Weapons Support Fluid Handling Division for the procurement of 13 air breathing hoses, identified by NSN 4720-01-688-4449. The required delivery date is January 22, 2026, with shipment to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Quotations are due by October 19, 2026. Invoicing and payment must be processed electronically through the Wide Area Workflow system. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, as well as specific packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129. Notably, the items have a non-extendable shelf life of 120 months. Compliance requirements include CMMC Level 2 certification, safeguarding of covered defense information per DFARS 252.204-7012, and strict export controls under ITAR and EAR. Additionally, offerors must comply with the Buy American Act and the Berry Amendment, providing full disclosure if non-domestic materials are utilized.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

TUBE ASSEMBLY, METAL

Solicitation # SPE7M4-27-Q-0039

Solicitation SPE7M4-27-Q-0039 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of seven metal tube assemblies, identified by NSN 4710-00-797-0040. These items are designated as Critical Safety Items, requiring 100 percent inspection of heat treating, stress relieving, and surface hardness. The required delivery timeline is 300 days after the date of order, with a material need ship date of October 31, 2027. Inspection and acceptance will occur at the origin, and the contract is issued under the First Destination Transportation program for delivery to the DLA Distribution New Cumberland facility in Pennsylvania. The procurement is subject to strict technical and quality requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA authorizations. Award will be based on the best value to the Government, evaluating past performance, offered delivery, and price. Contractors must utilize the Wide Area WorkFlow system for electronic invoicing and comply with various FAR and DFARS clauses, including those regarding the Buy American program and safeguarding covered defense information.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M4-27-Q-0040

Solicitation SPE7M4-27-Q-0040 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of 10 units of Shaft, Subassy (NSN 1420-00-961-5009), corresponding to Eaton Aerospace LLC part number 257733. This procurement is designated as a total small business set-aside under NAICS code 336413. The required delivery date is 300 days after order award, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Hill at Hill AFB, Utah. The contractor must adhere to strict technical and quality standards, including packaging per ASTM D3951 and palletization according to RP001, with all DLA Master List requirements taking precedence. Marking and labeling must comply with MIL-STD-129. Key compliance mandates include a CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and adherence to various DFARS and FAR clauses regarding cybersecurity, foreign entity restrictions, and small business subcontracting. Invoicing and receiving reports are to be processed electronically via the Wide Area Workflow system. Award will be based on the best value to the government, evaluating price, offered delivery, and past performance.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Military-Standard Packaging and Delivery ServicesThis subcontract for Military-Standard Packaging and Delivery Services supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized military packaging, marking, and shipping for prime contractors, ensuring all components adhere to MIL-STD-2073-1E and MIL-STD-129 standards. The scope of work includes the use of MIL-SPEC preservation and cushioning materials, as well as the application of hazardous materials labeling in compliance with 29 CFR 1910.1200. The contract is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 493110. All completed and packaged shipments are to be delivered to Tracy, California. The solicitation was posted on October 8, 2026, with a response deadline of October 19, 2026.

General Warehousing and Storage

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS