Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Fastener Manufacturing and Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the manufacture and supply of 4,783 close-tolerance screws designated by NSN 5305-01-462-2675, built to meet rigorous military specifications ensuring dimensional precision, material integrity, and performance under demanding operational conditions. Full traceability of materials and production processes is required, along with adherence to established quality assurance protocols to guarantee consistency and reliability across the entire lot. The work is classified as a subcontract under NAICS code 332721, indicating involvement in screw and bolt manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. The contract was posted on July 16, 2026, and performance is expected to comply with all applicable defense supply chain requirements, although specific delivery locations and point of contact details are not provided in the available data.

General Info

Manufacture and supply of 4,783 military-grade screws with full traceability and quality compliance under DLA oversight.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332721 - Precision Turned Product ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-28K1.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SCREW, CLOSE TOLERAN

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of 4,783 units of close-tolerance screws (NSN 5305-01-462-2675) compliant with military specifications, traceability, and quality assurance standards.

Similar Contracts

Same NAICS industry code

Manufacture of Retainer Sleeve, Sea

LAND SUPPLY CHAIN

POSTED

DEADLINE

Valve Precision Machining and Final Assembly

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE4A6-26-U-4033

This solicitation, identified as SPE4A6-26-U-4033, is issued by the Department of Defense ASC Commodities Division for the procurement of 1,136 machine bolts under NSN 5306-01-024-7525. The requirement is a total small business set-aside under NAICS code 332721, with a delivery window of 60 days after order. This procurement may result in a unilateral indefinite delivery contract for a one-year period and is conducted as a fully competitive acquisition based on military or federal specifications. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards and quality conformance inspections. Sampling must follow MIL-STD-1916 or ASQ H1331, with specific verification levels assigned to critical, major, and minor attributes. While item unique identification is not required by the service customer, identification marking must comply with MIL-STD-130N. Additionally, the supplier must provide a Certificate of Quality Compliance and adhere to requirements regarding the removal of government identification from non-accepted supplies.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-U-4037

This solicitation, number SPE4A6-26-U-4037, is issued by the Department of Defense ASC Commodities Division for the procurement of machine bolts under NSN 5306-01-197-1599. The requirement is a total small business set-aside under NAICS code 332721. The estimated quantity is 756 units with a delivery timeframe of 71 days after order. This is a critical application item that must be manufactured according to the current revision of the applicable part standard, specifically ASME B18.2.1. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per ASTM D3951 and MIL-STD-129, and palletization according to RP001. Quality conformance is managed through a Certificate of Quality Compliance and sampling methods based on MIL-STD-1916 or ASQ H1331. Inspection and acceptance will occur at the origin. The procurement includes specific marking requirements per MIL-STD-130N and requires compliance with the Technical Data Package and associated CDRLs.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-U-4036

This solicitation, identified as SPE4A6-26-U-4036, is issued by the Department of Defense ASC Commodities Division for the procurement of machine bolts under NSN 5306008892885. The requirement is for an estimated quantity of 848 units, defined as a critical application item. The hardware must be manufactured in accordance with the current revision of the applicable part standards, specifically referencing NASM35308 Revision 2 and FF-S-85F(3) Revision F. This is a total small business set-aside under NAICS code 332721. The contract specifies a delivery timeframe of 159 days with FOB and inspection/acceptance points set at the origin. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a requirement for zero non-conformances in sample lots. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements. Identification marking is required per MIL-STD-130N. The solicitation was posted on September 3, 2026, with a response deadline of September 18, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-U-4030

This solicitation, issued by the Defense Logistics Agency Aviation ASC Commodities Division under number SPE4A6-26-U-4030, is for the procurement of 665 pin-rivets identified by NSN 5320-00-489-4314. The contract is designated as a Total Small Business Set-Aside under NAICS code 332721, with a delivery requirement of 63 days after receipt of order. This is a source-controlled item that must be manufactured and tested according to limited rights data, which the government cannot provide. Consequently, only vendors with existing access to the data or traceability to approved sources should quote, and a Source Approval Request package is required for those seeking new approval. The contract mandates strict adherence to DLA packaging requirements, physical identification marking, and specific sampling methods per MIL-STD-1916 or ASQ H1331. Additionally, the item is subject to export control under ITAR or EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed Department of Defense export-controlled technical data training.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

BUSHING, SLEEVE

Solicitation # SPE4A6-26-T-26MX

This contract is for the procurement of 116 sleeve bushings, identified by NSN 3120011426349 and part number NAS537-16P048. The items are classified as commercial critical application items and must adhere to TDP Rev A Gen 2 and NAS537 standards. Inspection and acceptance will occur at the origin, with sampling conducted according to MIL-STD-1916 or ASQ H1331. The order requires delivery to the DLA Distribution New Cumberland facility in Pennsylvania within 141 days. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. The need ship date is January 31, 2027, with an original required delivery date of August 5, 2027.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

INSTALLATION AND RE

Solicitation # SPE4A5-26-T-368H

This contract, identified as SPE4A5-26-T-368H, is for the procurement of one installation and removal tool bushing, part number 3508-001 from Fatigue Technology, Inc. The item is identified by NSN 4920015506514 and is required for delivery to the Royal Jordanian Air Force at Prince Hassan Air Base in Safawi, Jordan. The delivery timeline is specified as 20 days after order, with an original required delivery date of July 24, 2026. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E, and incorporates technical and quality standards via the DLA Master List. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. The contract specifies that the material has no shelf life requirement and that item unique identification is not required by the service customer.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacture of Shoulder Pins (Headless)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture and Supply of Access Cover (NSN 5340012283513)This subcontract with the Department of Defense Land Supply Chain involves the manufacture and supply of one Access Cover, identified as part A232346–101A under NSN 5340012283513. The part must be fabricated according to Basic Drawing NR 98897 A232346, Revision C and TDP Rev G Gen 3 specifications, utilizing either additive manufacturing or precision machining. Due to its status as a Critical Application Item, the component requires rigorous inspection and full material certification to meet strict quality standards. The project is categorized under NAICS code 332721 and will be performed at Robins Air Force Base. The solicitation was posted on September 2, 2026, with a response deadline of September 14, 2026. The final deliverable is a single finished Access Cover produced for prime contractors on DLA supply contracts.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Sleeve Bushings (P/N 325759)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of High-Precision Hardware (TI-6NBS6-HC)

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

HAZMAT Packaging and International Freight Forwarding

Freight Transportation Arrangement

POSTED

DEADLINE

Supply of Corrosion Preventive Compound (NSN 8030-01-696-4654)

Adhesive Manufacturing

POSTED

DEADLINE

Paint Coating System Kit Supplier

Paint and Coating Manufacturing

POSTED

DEADLINE

Supply of Green Solvent Thinned Enamel (Aerosol)

Other Commercial Equipment Merchant Wholesalers

POSTED

DEADLINE

Supply of Lusterless Fast Dry Enamel (Olive Drab)

Paint and Coating Manufacturing

POSTED

DEADLINE

Metal Bar Manufacturer/Supplier

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Supply of Check Valve (NSN 4820015249679)

Industrial Valve Manufacturing

POSTED

DEADLINE

Supply of Fire Extinguisher Cylinder (NSN 4210014724683)

Marking Device Manufacturing

POSTED

DEADLINE

Supply of Adhesive Tape Seals

Adhesive Manufacturing

POSTED

DEADLINE

Aluminum Alloy Plate Supplier

Power Boiler and Heat Exchanger Manufacturing

POSTED

DEADLINE

Decontamination Station Route Marker Supply

Hazardous Waste Collection

POSTED

DEADLINE

Supply of Rubber Valve Seats (NSN 4820014446734)

All Other Plastics Product Manufacturing

POSTED

DEADLINE