Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Fastener Manufacturing – Flat Washers (MS27183-26)

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the manufacturing of 14,060 precision flat washers conforming to military specifications MS27183L and FF-W-92C, with strict adherence to zero-defect quality standards due to their critical application in high-stakes environments. These components must meet exacting dimensional, material, and surface finish requirements to ensure reliability under extreme operational conditions, with no tolerance for failure. The work is classified as a subcontract under NAICS code 332321, indicating fabrication of metal fasteners and related hardware, and is managed by the Nuclear Reactor Program within the Department of Defense. Performance of this contract is required to be completed at a facility located in San Diego, California, with a zip code of 92136-3581, and all deliverables must be ready for inspection and acceptance prior to the response deadline of August 10, 2026. The solicitation was posted on July 30, 2026, allowing potential vendors a limited window to prepare and submit proposals. While no set-aside status is designated, the urgency and technical specificity of the requirement suggest that only experienced manufacturers with proven capabilities in defense-grade precision machining will be competitive. All production must align with the defined military standards and be traceable to ensure compliance throughout the supply chain.

General Info

Manufacture 14,060 military-spec washers to zero-defect standards in San Diego by August 10, 2026.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

332321 - Metal Window and Door ManufacturingView NAICS

Place of Performance

SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → NUCLEAR REACTOR PROGRAM

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of 14,060 precision flat washers per military specifications MS27183L and FF-W-92C, meeting zero-defect quality standards for critical application use.

Similar Contracts

Same NAICS industry code

Locking Sleeve for Electrical Connector – Manufacturing and SupplyThe contract requires the manufacture and supply of six units of locking sleeves for electrical connectors identified by NSN 5935-01-666-8618, with strict adherence to military specification standards to ensure performance and reliability in operational environments. Each unit must be properly packaged and labeled according to federal and defense logistics requirements to facilitate seamless integration into existing supply chains. The delivery timeline is firm, with all items expected to be completed and shipped no later than 125 days after contract award, emphasizing the need for efficient production planning and quality control throughout the manufacturing process. This is a subcontract under the Department of Defense’s Active Devices Division, classified under NAICS code 332321 for other electrical equipment and component manufacturing. The solicitation was posted on July 31, 2026, with responses due by August 15, 2026, indicating a competitive procurement window of approximately two weeks. Although specific point of contact information and place of performance are not provided, the contract is managed through the DLA Dibbs platform, requiring potential suppliers to review all technical and logistical details via the official URL to ensure full compliance with procurement guidelines and contractual obligations.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of High-Impact Hurricane Roller Curtain DoorThe contract calls for the supply of one Alpine Redi Storm 60 PSF rolling hurricane door featuring a stainless steel finish, hand-chain operation, and a 20,000-cycle spring capacity, specifically designated for use at a naval facility in Japan. The product must meet stringent durability and performance standards to ensure protection against extreme weather events in a high-risk marine environment, with the hand-chain mechanism providing reliable manual operation in the event of power failure or system disruption. The 20,000-cycle spring rating indicates a long service life under repeated use, critical for a military installation requiring consistent operational readiness. This is a subcontract under a Small Business Set Aside classification, meaning only eligible small businesses may respond, and it is governed under NAICS code 332321 for metal door and window manufacturing. The solicitation was posted on July 31, 2026, with a response deadline set for August 7, 2026, allowing for a one-week window for potential vendors to submit proposals. The contracting activity is managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense, indicating the procurement is part of a larger defense infrastructure initiative. The place of performance is in Japan, requiring the vendor to account for international shipping, compliance with local and defense regulations, and potential customs or logistical challenges in delivering and installing the unit.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

2040 - ROLLER CURTAIN DOOR

Solicitation # N0040626Q0452

The solicitation titled 2040 - ROLLER CURTAIN DOOR, with solicitation number N0040626Q0452, is a Small Business Set Aside total opportunity issued by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense. Responsible sources may submit quotes, bids, or proposals by the deadline of August 7, 2026, at 8:00 PM Eastern Time, following the guidelines outlined in RFO 12.203. Evaluation will consider technical factors including delivery date, price, and past performance, with no single factor assigned relative importance; the government will select the most advantageous offer based on the combined merit of these criteria. The North American Industry Classification System code is 332321, and the solicitation is open exclusively to small businesses meeting the set-aside criteria. All submissions must be directed to the designated point of contact, Stacia DeBriae, via email at stacia.l.debriae.civ@us.navy.mil, and performance is expected to be fulfilled at the agency’s location in Bremerton, Washington, 98314-5100.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

Precision Fabrication of Weapon Access DoorThe contract calls for the precision fabrication of a single weapon access door meeting stringent military specifications, with strict requirements for dimensional accuracy, material compliance, and structural integrity to ensure performance under operational conditions. The work must be executed to exact technical standards, emphasizing quality control and adherence to defense-grade engineering protocols. Awarded under a subcontract category and identified by NAICS code 332321, the effort is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance required at Mechanicstown, Pennsylvania, zip code 17050-2411. The solicitation was posted on July 30, 2026, and responses are due by August 7, 2026, with all submissions expected to align with the unique capabilities and compliance expectations of a defense-related manufacturing environment.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Metal Fabrication of Mounting BracketsThe contract entails the precision metal fabrication of 628 or more mounting brackets to fulfill military specifications, requiring advanced manufacturing processes including CNC machining, welding, and surface finishing in strict compliance with DLA technical standards. Each component must adhere to exacting quality controls to ensure structural integrity and functionality under operational conditions, with all work performed to satisfy Department of Defense requirements. The production must be completed within the constraints of the subcontract’s performance window, with final delivery targeted to meet established military logistics timelines. The work is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and falls under NAICS code 332321 for metal forging and stamping. The solicitation was posted on July 30, 2026, with a firm response deadline of August 10, 2026, indicating a tight turnaround for qualified subcontractors to submit proposals. This opportunity is structured as a subcontract under the Land Supply Chain organization, and although no set-aside designation is specified, all bidders must demonstrate capability to meet stringent defense manufacturing criteria, including documentation, traceability, and inspection protocols required by DLA.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hex Cap Screw SupplyThe contract calls for the manufacture or supply of four units of hexagon head cap screws compliant with DLA RA001 specifications, encompassing all necessary packaging, labeling, and delivery requirements. The items must be delivered to Tobyhanna, Pennsylvania, with the ZIP code 18466-5050 designated as the place of performance. The solicitation is classified as a subcontract under the NAICS code 332321, which corresponds to screw, nut, and bolt manufacturing. The offering organization is the ASC Commodities Division within the Department of Defense, and the proposal must be submitted by the response deadline of August 7, 2026. The solicitation was posted on July 30, 2026, and interested parties can access further details via the provided DIBBS portal link.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

RAMP SKIN PANEL Manufacturing and SupplyThe contract requires the manufacture, inspection, packaging, marking, and delivery of five RAMP SKIN PANEL units designated by NSN 1560LLNCB1542, all of which must fully comply with military standards and Defense Logistics Agency requirements. The work is to be performed in San Diego, California, with a strict delivery timeline tied to the contract's response deadline of August 7, 2026, following a July 30, 2026 posting date. The contract falls under the NAICS code 332321, indicating it is a subcontract related to forgings and stampings, and is managed by the Department of Defense through DLA Fleet Readiness Southwest. All deliverables must meet rigorous quality and documentation standards expected by DLA, with no set-aside provisions specified, meaning any qualified bidder may respond, and performance must be completed at the designated place of performance in San Diego.

DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

DEADLINE

Flat Washer Supply (NSN: 5310015135434)The contract requires the manufacture or supply of 5,745 flat washers identified by NSN 5310015135434, adhering strictly to federal specifications for material, dimensions, and performance. All items must be properly packaged and labeled in accordance with government standards, ensuring traceability and compliance throughout the supply chain. Delivery is to be made FOB origin to the Defense Logistics Agency facility in New Cumberland, Pennsylvania, with the recipient being the ASC Commodities Division under the Department of Defense. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, and is classified as a subcontract under NAICS code 332321, which pertains to screw, nut, and bolt manufacturing. There is no set-aside designation specified, and the contract is open to qualified suppliers meeting all technical and logistical requirements.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture of Electric Light Globes (MIL-DTL-16377K Compliant)The contract awards the full manufacturing of 209 electric light globes compliant with MIL-DTL-16377K specifications, requiring strict adherence to military-grade standards including hermetic sealing to ensure durability and performance under demanding conditions. Full materials traceability is mandatory throughout the production process, and all units must be packaged according to military packaging requirements to guarantee integrity during transport and storage. The contract is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses are eligible to bid, as defined by the SBA and FAR 19.5. The North American Industry Classification System code 332321 confirms the scope aligns with electrical lighting equipment manufacturing. Performance is required at the designated facility in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, with the acquiring agency identified as the Nuclear Reactor Program within the Department of Defense.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Manufacture of Electrical Mounting Base (NSN 5975-01-598-1921)The contract pertains to the fabrication and delivery of four electrical mounting bases identified by NSN 5975-01-598-1921, requiring strict adherence to DLA technical requirements, MIL-STD-1916, and applicable military specifications. The work encompasses full manufacturing processes including inspection, proper marking, and compliant packaging to ensure readiness for military use. The subcontract is issued under NAICS code 332321 and is managed by the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. All deliverables must meet rigid quality and documentation standards to satisfy military procurement protocols. The solicitation was posted on July 30, 2026, with a firm response deadline of August 4, 2026, leaving a brief five-day window for potential vendors to submit proposals. The place of performance and point of contact details are not specified, indicating that the performance location may be flexible as long as contractual requirements are met. The contract is open to qualified subcontractors without a defined set-aside classification, allowing broad participation from eligible defense suppliers. All submissions must align with the technical and procedural demands outlined in the referenced military standards to qualify for award.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Machining and Fabrication of Mounting BracketThe contract calls for the precision manufacturing of a single military-spec mounting bracket, adhering strictly to government-issued drawings and material specifications with zero-defect quality requirements. This is a subcontract for advanced metal fabrication services that demands exacting tolerances, certified material sourcing, and compliance with defense industry standards to ensure operational readiness and durability under demanding field conditions. The work must be executed to meet all military specifications without deviation, and final acceptance hinges on documented quality assurance and inspection protocols. The solicitation is posted under the NAICS code 332321 for forging and stamping, with a response deadline of August 10, 2026, and was issued by the Department of Defense through the LAND SUPPLY CHAIN organization. While no set-aside designation or point of contact is provided, the place of performance and agency office details remain unspecified, indicating the contractor must be prepared to fulfill performance requirements wherever directed. The contract is accessible via the DIBBS platform, and all proposals must align with the military’s stringent technical and compliance expectations to be considered viable.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hex Cap Screw Manufacturing and SupplyThe contract requires the manufacture, packaging, labeling, and delivery of exactly 72 units of hex cap screws to meet stringent military specifications, including compliance with DLA standards and MIL-STD-129 for packaging. All work must adhere to the Buy American Act, ensuring that materials and production originate domestically. The product must fulfill the technical and quality requirements set forth by military standards without exception, encompassing dimensional accuracy, material composition, surface finish, and testing protocols. Packaging must conform to MIL-STD-129, which governs labeling, marking, and containerization for military logistics and traceability. This is a subcontract opportunity under the NAICS code 332321, issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 30, 2026, with a response deadline of August 7, 2026. The place of performance and specific delivery location are not detailed, but all units must be ready for military receipt and distribution through established defense supply channels. The contract is accessible via the DIBBS portal, and interested parties must submit proposals before the deadline to be considered. No set-aside preferences are indicated, meaning all eligible contractors may apply regardless of business size or status.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

Military-Compliant Packaging and MarkingThis contract requires strict adherence to military packaging and marking standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 along with RP001 for marking, ensuring all items are securely packaged in waterproof bags and equipped with properly attached brazing rings. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond. The North American Industry Classification System code 493190 applies, indicating the focus is on other transportation support activities. Performance of the contract is mandated to occur at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 31, 2026, and all responses must be submitted by August 7, 2026, with the procurement managed by the Nuclear Reactor Program under the Department of Defense.

Other Warehousing and Storage

POSTED

DEADLINE

Quality Assurance & COQC Documentation ServicesThe contract seeks specialized quality assurance services focused on the preparation and submission of Certificates of Quality Compliance for each production lot, requiring comprehensive inspection records, full traceability documentation, and timely upload to the iRAPT system. This subcontract is designated as a Total Small Business Set-Aside under SBA guidelines, ensuring eligibility is limited to small businesses as defined by the NAICS code 541330, which aligns with scientific and technical consulting services. The work is performance-based and must be completed in accordance with strict compliance standards, with the place of performance located at New Cumberland, Pennsylvania, zip code 17070-5002. The opportunity was posted on July 31, 2026, with responses due by August 7, 2026, and is managed under the Nuclear Reactor Program within the Department of Defense, targeting vendors capable of delivering rigorous, audit-ready quality documentation to support defense manufacturing integrity.

Engineering Services

POSTED

DEADLINE

Specialized Tooling Design and FabricationThe contract requires specialized design, engineering, and fabrication of molds, dies, and fixtures specifically for the casting and machining of copper alloy pipe tees, with full accountability for prototype validation and configuration control throughout the development lifecycle. The work demands precision engineering capabilities to ensure dimensional accuracy and material integrity, adhering to strict industry standards for nuclear reactor applications, as the tools will support critical components used in high-performance systems. All deliverables must be thoroughly documented and traceable to maintain configuration integrity from initial design through final production. This is a total small business set-aside subcontract under NAICS code 333514, issued by the Nuclear Reactor Program within the Department of Defense, and is open only to small businesses as defined by the SBA. The solicitation was posted on July 31, 2026, with a response deadline of August 7, 2026, and the performance location is fixed at New Cumberland, Pennsylvania, with a zip code of 17070-5002. While no point of contact is listed, interested parties must submit proposals through the official DIBBS portal by the stated deadline to be considered, with all work expected to meet the rigorous demands of defense and nuclear-grade component manufacturing.

Special Die and Tool, Die Set, Jig, and Fixture Manufacturing

POSTED

DEADLINE

Copper Alloy Socket-Type Pipe Tee ManufacturingThe contract requires the manufacture of 385 copper alloy socket-type pipe tees with a National Stock Number of 4730-00-542-5250, produced through casting and precision machining processes to meet stringent Defense Logistics Agency standards. All work must include the development and use of appropriate tooling, comprehensive testing protocols, and full compliance with technical and quality specifications defined by DLA. The project is designated as a Total Small Business Set-Aside under the Small Business Administration guidelines, restricting eligibility to small businesses as defined by FAR 19.5, with the North American Industry Classification System code 332111 applying to the work scope. Performance of this contract is designated to occur at a facility in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the work is being procured under the Nuclear Reactor Program within the Department of Defense. The solicitation was posted on July 31, 2026, with a firm response deadline of August 7, 2026. This is a subcontract opportunity, indicating it will be awarded to a prime contractor who may then engage subcontractors to fulfill obligations. All deliverables must adhere to federal procurement regulations and technical requirements to ensure suitability for critical nuclear reactor system applications.

Iron and Steel Forging

POSTED

DEADLINE

Unable to Decompose Subcontract OpportunitiesThe contract opportunity titled "Unable to Decompose Subcontract Opportunities" was posted on July 31, 2026, with a response deadline of August 6, 2026, and is categorized as a subcontract under the Nuclear Reactor Program managed by the Department of Defense. The place of performance is identified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, though no specific city, state, or country details beyond that are provided. No NAICS code, set-aside type, or organizational type is specified, and the point of contact information is missing. The solicitation number is not available, and the prime contract data could not be retrieved due to technical issues, which prevents the identification of any underlying prime contract or associated supplier opportunities. Despite the incomplete data, the opportunity remains accessible through the provided DIBBS link for further exploration.

POSTED

DEADLINE

Domestic Freight and Delivery Logistics to Hill AFB

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Military-Compliant Packaging, Marking, and Labeling Services

Other Warehousing and Storage

POSTED

DEADLINE

Precision Manufacturing of MIL-DTL-26518C Compliant Fixed Bushings

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Domestic and International Shipment Logistics (Ocean & Land)

All Other Support Activities for Transportation

POSTED

DEADLINE

Specialized Packaging and Preservation Services

Packaging and Labeling Services

POSTED

DEADLINE

Precision Gasket Manufacturing – UV-Resistant Sealing Components

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M2-26-Q-0706

This contract specifies the procurement of a copper alloy socket-type tee fitting with a nominal pipe size of 1 inch, manufactured via metal casting and requiring specialized tooling for production. The item is identified by NSN 4730-00-542-5250, with a quantity of 385 units to be delivered within 100 days of award. The solicitation is a total small business set-aside under FAR 19.5, with full and open competition restricted to qualified small businesses. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and configuration changes are governed by engineering change proposals and variance request procedures. Government identification must be removed from non-accepted supplies. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable mercury-containing devices must be shockproof with a secondary containment barrier per NAVSEA 5100-003D. Each delivery lot must be accompanied by a Certificate of Quality Compliance (COQC) prepared in accordance with the Supplemental Quality Assurance Provision, with one copy provided physically and an electronic copy uploaded to the iRAPT system. For government-inspected shipments, the COQC must be available for review at the time of acceptance. The contract data indicates the issuing agency is the Department of Defense’s Nuclear Reactor Program, with performance taking place in New Cumberland, PA, and primary point of contact is Alla Yakover.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE