Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quality Assurance & COQC Documentation Services

Active

Federal

Response Deadline08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks specialized quality assurance services focused on the preparation and submission of Certificates of Quality Compliance for each production lot, requiring comprehensive inspection records, full traceability documentation, and timely upload to the iRAPT system. This subcontract is designated as a Total Small Business Set-Aside under SBA guidelines, ensuring eligibility is limited to small businesses as defined by the NAICS code 541330, which aligns with scientific and technical consulting services. The work is performance-based and must be completed in accordance with strict compliance standards, with the place of performance located at New Cumberland, Pennsylvania, zip code 17070-5002. The opportunity was posted on July 31, 2026, with responses due by August 7, 2026, and is managed under the Nuclear Reactor Program within the Department of Defense, targeting vendors capable of delivering rigorous, audit-ready quality documentation to support defense manufacturing integrity.

General Info

Small business set-aside for quality compliance certification and traceability documentation in New Cumberland, PA, for DoD nuclear reactor program.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → NUCLEAR REACTOR PROGRAM

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Preparation and submission of Certificate of Quality Compliance (COQC) for each lot, including inspection records, traceability, and iRAPT upload.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.

Construction Management

POSTED

about 3 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, ensuring optimal performance in a continuous 24/7/365 operational environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, comfort, reliability, and lifespan while maintaining compliance with safety and regulatory standards. Services are delivered through Service Directives and require close collaboration with Aviation Facilities and Infrastructure to meet project deliverables. Work will be managed under an Indefinite-Delivery/Indefinite-Quantity contract, with the Port of Seattle’s Aviation Facilities and Infrastructure team as the primary point of contact. The procurement is classified under NAICS code 541330, reflecting professional, scientific, and technical services related to engineering. Key contacts include Jason Gates as the primary point of contact and Jim Farris as the project manager, both reachable through the Port of Seattle’s official communications. The solicitation was posted on July 31, 2026, with performance expected to occur at the airport location, though specific geographic details are not defined in the provided data.

Aviation Facilities & Infrastructure

POSTED

about 3 hours ago

DEADLINE

Engineering Change Proposals & ModificationsThe contract requires the development and submission of engineering change proposals for modifications to sterile storage cabinets, with a focus on conducting thorough impact analyses, accurate cost estimations, and comprehensive technical documentation. All submissions must align with established engineering standards and ensure that proposed changes maintain or enhance the integrity, functionality, and compliance of the cabinets in sterile environments. The work is scoped to deliver detailed proposals that clearly articulate the technical rationale, potential risks, and financial implications of each modification. This is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under the SDVOSB program, with NAICS code 541330 indicating engineering services. The opportunity was posted on August 1, 2026, with a response deadline of August 7, 2026, and performance is expected to take place in Los Angeles, California, with a ZIP code of 90073. The contracting office is the 262-NETWORK Contract Office 22 under the Department of Veterans Affairs, and bidders must be certified SDVOSBs to be eligible for award.

262-NETWORK Contract Office 22 (36C262)

POSTED

about 20 hours ago

DEADLINE

Program Management & Systems Engineering SupportThe contract requires comprehensive program and systems engineering support to oversee the maintenance program across Department of Veterans Affairs sites, focusing on service coordination, compliance reporting, and lifecycle planning. The work involves ensuring operational readiness and regulatory adherence through systematic engineering practices that align with VA standards and mission objectives, with all activities centered at the Los Angeles location with zip code 90073. This is a subcontract under a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside, designated under NAICS code 541330 for engineering services, and is intended to provide targeted opportunities to businesses owned and controlled by service-disabled veterans. All proposals must be submitted by the deadline of August 7, 2026, with the solicitation posted on August 1, 2026, and the award will be managed by the 262-NETWORK Contract Office 22 within the Department of Veterans Affairs.

262-NETWORK Contract Office 22 (36C262)

POSTED

about 20 hours ago

DEADLINE

Zoning & Land Use Planning SupportThe contract seeks advisory services focused on infill development, zoning alignment, and regulatory processes within designated commercial corridors, aiming to support strategic growth and land use efficiency. The work will involve guiding public and private stakeholders through complex planning frameworks to ensure development aligns with municipal goals, streamlines approvals, and enhances economic vitality in targeted areas. Expertise in local zoning codes, environmental regulations, and community engagement practices will be essential to delivering actionable recommendations and facilitating smoother project pathways. This is a subcontract under the Office of Economic Development for the state of California, classified under NAICS code 541330 for architectural, engineering, and related services. The opportunity was posted on July 31, 2026, with a firm response deadline of September 5, 2026. While specific location details for performance or contact are not provided, the scope implies work centered on urban corridors within California, requiring deep familiarity with state and local regulatory environments. The contract does not specify a set-aside type, indicating it is open to qualified subcontractors without reserved eligibility criteria.

Office of Economic Development

POSTED

DEADLINE

in about 1 month

Investment and Revitalization Strategy for Sacramento County Commercial Corridors

Solicitation # 2026-GEN-0073

Sacramento County is seeking to develop a comprehensive Investment and Revitalization Strategy for its 15 commercial corridors in the unincorporated areas, aiming to address longstanding challenges such as aging infrastructure, underutilized properties, fragmented ownership, and declining private investment. With a population of approximately 1.6 million and a diverse economy anchored by government, healthcare, logistics, education, and emerging sectors like clean technology and life sciences, the County has identified these commercial corridors as vital to economic vitality, community resilience, and long-term fiscal sustainability. Previous planning efforts—including market analyses and strategic reports from 2017 through 2024—have underscored the need for place-based, implementation-focused interventions that integrate housing, retail, public space improvements, and business support to attract private capital and revitalize underperforming districts. This initiative builds on those foundations to create an actionable roadmap that prioritizes opportunities, evaluates barriers, and aligns public resources to maximize impact across varied market conditions. The County is soliciting proposals through solicitation number 2026-GEN-0073, with responses due by September 5, 2026, and the work will be led by the Office of Economic Development based in Sacramento. The selected contractor will be tasked with delivering a practical, data-informed strategy that identifies realistic redevelopment opportunities, outlines prioritized actions for County intervention, and provides a clear framework for leveraging both public and private investment. Emphasis will be placed on strategies that enhance neighborhood-serving businesses, improve the physical environment, expand housing options, and foster equitable economic growth. The project will rely on existing background materials, including market studies and corridor maps, and is designed to ensure that revitalization efforts are tailored to the unique context of each corridor while contributing to broader regional goals. The final strategy must be executable, measurable, and designed to support sustainable fiscal outcomes for the County’s unincorporated communities.

Office of Economic Development

POSTED

DEADLINE

in about 1 month

Fire Alarm System Design & State Fire Marshal ApprovalThe contract involves the design modification or upgrade of existing fire alarm systems within facilities managed by the California Department of Corrections & Rehabilitation, with a primary requirement to secure formal approval from the California State Fire Marshal. This includes preparing and submitting comprehensive technical packages that demonstrate full compliance with applicable state fire codes and safety standards, ensuring all documentation is accurate, complete, and submitted in accordance with regulatory protocols. The work must be executed with precision to meet official approval timelines and technical specifications set forth by the State Fire Marshal’s office. Subcontractors are expected to manage the entire process from initial design adjustments through final certification, with responsibility for all code compliance documentation, submittals, and communications with state authorities. The solicitation is open for responses until September 4, 2026, and is categorized under NAICS code 541330 for engineering services. Performance of the work is expected to occur across various state correctional facilities under the jurisdiction of the California Department of Corrections & Rehabilitation, though specific locations are not detailed in the posting. All contractors must be prepared to demonstrate expertise in fire protection system design and state regulatory processes to qualify.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

in about 1 month

Fire Alarm Preventative Maintenance & Safety InspectionsThe contract requires the provision of scheduled preventative maintenance and safety inspections for fire alarm systems across all California Department of Corrections & Rehabilitation facilities. Work includes comprehensive testing, diagnostic evaluations, and thorough documentation to ensure system compliance and operational readiness. All services must be completed within 48 hours of receiving notification and are to be performed during normal business hours to minimize disruption to facility operations. The work is governed under NAICS code 541330 and is structured as a subcontract opportunity with a response deadline of September 4, 2026. The contract is administered by the State of California and applies to locations statewide under the jurisdiction of CDCR.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

in about 1 month

System Start-Up, Commissioning & TestingThe contract pertains to the post-installation commissioning, startup, performance testing, and calibration of the HVAC system to ensure full operational readiness. This work is critical to verifying that all components function as designed, meet specified performance criteria, and are properly calibrated for efficient and reliable operation. The scope requires detailed testing protocols, documentation of results, and adjustments to bring the system into compliance with operational and safety standards prior to handover. This subcontract is issued by the Texas Department of Criminal Justice under NAICS code 541330, which classifies it as architectural and engineering services. The solicitation was posted on July 31, 2026, with a response deadline of August 21, 2026. The place of performance is within Texas, though specific locations are not detailed. The contract is not subject to a set-aside designation, and while no point of contact is listed, the procurement is managed through the Texas SmartBuy portal with the solicitation available via the provided link.

Texas Department of Criminal Justice

POSTED

DEADLINE

Traffic Signal Timing Support and OptimizationThe City of Villa Rica is seeking a subcontractor to provide comprehensive support for traffic signal timing studies aimed at optimizing signal phasing and reducing congestion. This effort involves full-cycle services including field data collection, advanced analysis of traffic patterns, and close coordination with engineering consultants to implement effective timing adjustments. The work is focused on improving traffic flow efficiency through evidence-based modifications to existing signal systems, with an emphasis on real-world performance metrics and regional connectivity. The opportunity is open for submission until August 20, 2026, and falls under NAICS code 541330, indicating it is a professional service engagement in engineering services. The contract type is classified as a subcontract, suggesting the selected vendor will operate under a prime contractor or larger project framework. While specific performance location details are not provided, the work is tied to the City of Villa Rica in Georgia, and all deliverables must align with local transportation goals. The solicitation is accessible via the Georgia Department of Administrative Services portal, and proposers are expected to demonstrate expertise in traffic signal optimization, data-driven analysis, and municipal collaboration.

City of Villa Rica

POSTED

DEADLINE

Project Execution, Phasing, and Coordination Plan DevelopmentThe contract calls for the development and implementation of a detailed plan to phase construction activities in a way that ensures the uninterrupted operation of occupied Department of Public Safety facilities. This requires meticulous scheduling of work to minimize disruption to ongoing critical services, with a strong emphasis on risk management strategies to anticipate and mitigate potential impacts on safety, accessibility, and functionality of secured or high-traffic areas. The contractor must coordinate closely with multiple stakeholders including agency personnel, emergency responders, maintenance staff, and possibly the public to align construction timelines with operational needs and safety protocols. The plan must include comprehensive documentation of work sequencing, buffer zones, temporary relocations, noise and dust controls, emergency access routes, and contingency measures for unexpected delays or hazards. All activities must comply with state and federal regulations governing public facility operations and construction in sensitive environments. The solicitation is classified as a subcontract under NAICS code 541330, indicating specialized professional services in architectural or engineering activities, and responses are due by August 14, 2026, with the opportunity posted on the Texas SmartBuy portal. The work will take place across various DPS facilities within Texas, requiring localized planning and adaptability to site-specific constraints and operational demands.

Department of Public Safety

POSTED

DEADLINE

Small and Disadvantaged Business (CBE/SBE/DBE) Subcontracting OpportunitiesBroward County is offering subcontracting opportunities exclusively for certified Community Business Enterprise, Small Business Enterprise, and Disadvantaged Business Enterprise firms across all trades, as part of its commitment to meeting participation goals for underrepresented businesses. These opportunities are open to firms certified under the county’s programs, ensuring equitable access to contracts tied to county-funded projects. The solicitation is categorized under NAICS code 541330, indicating a focus on architectural and engineering services, although the scope extends to all trades relevant to county work. Participation is not limited to a specific project but aligns with broader county initiatives that prioritize diverse vendor engagement. The posting went live on July 31, 2026, with a response deadline of August 7, 2026, giving interested firms one week to submit their interest or proposals. All interactions and submissions must occur through the designated platform at the provided web link, and firms are expected to meet certification requirements in good standing to qualify. There are no additional set-aside designations beyond the CBE, SBE, and DBE certifications, and the county seeks active participation from certified businesses to fulfill its diversity and inclusion objectives.

POSTED

DEADLINE

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

Military-Compliant Packaging and MarkingThis contract requires strict adherence to military packaging and marking standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 along with RP001 for marking, ensuring all items are securely packaged in waterproof bags and equipped with properly attached brazing rings. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond. The North American Industry Classification System code 493190 applies, indicating the focus is on other transportation support activities. Performance of the contract is mandated to occur at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 31, 2026, and all responses must be submitted by August 7, 2026, with the procurement managed by the Nuclear Reactor Program under the Department of Defense.

Other Warehousing and Storage

POSTED

DEADLINE

Specialized Tooling Design and FabricationThe contract requires specialized design, engineering, and fabrication of molds, dies, and fixtures specifically for the casting and machining of copper alloy pipe tees, with full accountability for prototype validation and configuration control throughout the development lifecycle. The work demands precision engineering capabilities to ensure dimensional accuracy and material integrity, adhering to strict industry standards for nuclear reactor applications, as the tools will support critical components used in high-performance systems. All deliverables must be thoroughly documented and traceable to maintain configuration integrity from initial design through final production. This is a total small business set-aside subcontract under NAICS code 333514, issued by the Nuclear Reactor Program within the Department of Defense, and is open only to small businesses as defined by the SBA. The solicitation was posted on July 31, 2026, with a response deadline of August 7, 2026, and the performance location is fixed at New Cumberland, Pennsylvania, with a zip code of 17070-5002. While no point of contact is listed, interested parties must submit proposals through the official DIBBS portal by the stated deadline to be considered, with all work expected to meet the rigorous demands of defense and nuclear-grade component manufacturing.

Special Die and Tool, Die Set, Jig, and Fixture Manufacturing

POSTED

DEADLINE

Copper Alloy Socket-Type Pipe Tee ManufacturingThe contract requires the manufacture of 385 copper alloy socket-type pipe tees with a National Stock Number of 4730-00-542-5250, produced through casting and precision machining processes to meet stringent Defense Logistics Agency standards. All work must include the development and use of appropriate tooling, comprehensive testing protocols, and full compliance with technical and quality specifications defined by DLA. The project is designated as a Total Small Business Set-Aside under the Small Business Administration guidelines, restricting eligibility to small businesses as defined by FAR 19.5, with the North American Industry Classification System code 332111 applying to the work scope. Performance of this contract is designated to occur at a facility in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the work is being procured under the Nuclear Reactor Program within the Department of Defense. The solicitation was posted on July 31, 2026, with a firm response deadline of August 7, 2026. This is a subcontract opportunity, indicating it will be awarded to a prime contractor who may then engage subcontractors to fulfill obligations. All deliverables must adhere to federal procurement regulations and technical requirements to ensure suitability for critical nuclear reactor system applications.

Iron and Steel Forging

POSTED

DEADLINE

Unable to Decompose Subcontract OpportunitiesThe contract opportunity titled "Unable to Decompose Subcontract Opportunities" was posted on July 31, 2026, with a response deadline of August 6, 2026, and is categorized as a subcontract under the Nuclear Reactor Program managed by the Department of Defense. The place of performance is identified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, though no specific city, state, or country details beyond that are provided. No NAICS code, set-aside type, or organizational type is specified, and the point of contact information is missing. The solicitation number is not available, and the prime contract data could not be retrieved due to technical issues, which prevents the identification of any underlying prime contract or associated supplier opportunities. Despite the incomplete data, the opportunity remains accessible through the provided DIBBS link for further exploration.

POSTED

DEADLINE

Domestic Freight and Delivery Logistics to Hill AFB

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Military-Compliant Packaging, Marking, and Labeling Services

Other Warehousing and Storage

POSTED

DEADLINE

Precision Manufacturing of MIL-DTL-26518C Compliant Fixed Bushings

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Domestic and International Shipment Logistics (Ocean & Land)

All Other Support Activities for Transportation

POSTED

DEADLINE

Specialized Packaging and Preservation Services

Packaging and Labeling Services

POSTED

DEADLINE

Precision Gasket Manufacturing – UV-Resistant Sealing Components

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M2-26-Q-0706

This contract specifies the procurement of a copper alloy socket-type tee fitting with a nominal pipe size of 1 inch, manufactured via metal casting and requiring specialized tooling for production. The item is identified by NSN 4730-00-542-5250, with a quantity of 385 units to be delivered within 100 days of award. The solicitation is a total small business set-aside under FAR 19.5, with full and open competition restricted to qualified small businesses. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and configuration changes are governed by engineering change proposals and variance request procedures. Government identification must be removed from non-accepted supplies. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable mercury-containing devices must be shockproof with a secondary containment barrier per NAVSEA 5100-003D. Each delivery lot must be accompanied by a Certificate of Quality Compliance (COQC) prepared in accordance with the Supplemental Quality Assurance Provision, with one copy provided physically and an electronic copy uploaded to the iRAPT system. For government-inspected shipments, the COQC must be available for review at the time of acceptance. The contract data indicates the issuing agency is the Department of Defense’s Nuclear Reactor Program, with performance taking place in New Cumberland, PA, and primary point of contact is Alla Yakover.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M2-26-T-5487

A gasket with NSN 5330-99-570-6558 is being solicited under contract number SPE7M2-26-T-5487 by the Defense Logistics Agency, a component of the Department of Defense. The request specifies a quantity of two units and was posted on July 7, 2026, with a response deadline of July 20, 2026. The solicitation is open to federal contractors and does not designate a specific set-aside or NAICS code, indicating it is broadly available. The place of performance and point of contact details are not provided, and the procurement is managed through the DIBBS system with the official link for submission and information access.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE