Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Fastener Manufacturing – Flat Washers (NSN 5310001861380)

Active

Federal

Response Deadline07/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Precision flat washers meeting military specifications MIL-DTL-5521C and MS28777D are being procured under a subcontract for critical defense applications requiring full material traceability and rigorous quality control. The contract, issued by the ASC Commodities Division of the Department of Defense, mandates adherence to exacting dimensional, material, and performance standards to ensure reliability in high-stakes environments. Production must include documented lot traceability from raw material to finished component, with all manufacturing processes subject to stringent inspection and certification requirements. The place of performance is designated as Albany, Georgia, with a response deadline of July 30, 2026, and the NAICS code 332722 confirms this is a forgings and stamped metal products manufacturing effort. Suppliers must demonstrate proven capability in producing defense-grade fasteners with zero tolerance for deviation from military specs.

General Info

Procure military-spec flat washers with full traceability, made in Albany, Georgia, by July 30, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

ALBANY, GA, 31704-1128, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of flat washers per military specifications MIL-DTL-5521C and MS28777D with full traceability and quality control for critical applications.

Similar Contracts

Same NAICS industry code

Precision Fastener Manufacturing – Bevel Washer (NSN 5310011356076)The contract calls for the manufacture and delivery of a bevel washer identified by the military NSN 5310011356076, adhering strictly to all Department of Defense technical, quality, packaging, marking, preservation, and destination inspection standards set by the Defense Logistics Agency. The product must meet exacting military specifications to ensure compatibility and performance in operational environments, with compliance verified through rigorous inspection protocols at the delivery point. The solicitation, issued under the NAICS code 332722 for fastener manufacturing, is classified as a subcontract with a response deadline of July 30, 2026, and a posting date of July 22, 2026. The performance location is designated as APO 96278-2069, indicating delivery to a U.S. military overseas address. The contracting entity is the ASC Commodities Division within the Department of Defense, and all work must be executed in alignment with DLA’s requirements without deviation. The full details and submission instructions are accessible via the provided DIBBS portal link.

ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

Precision Machining of Drill Chucks with ArborThe contract requires the manufacture, marking, packaging, and delivery of 13 precision drill chucks with arbor, identified by NSN 3460-00-540-1084, fully compliant with military specifications for traceability, packaging, and labeling. This is a subcontract under the NAICS code 332722, issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, with performance required at NEW CUMBERLAND, PA, zip code 17070-5002. All units must meet stringent defense standards to ensure operational reliability and full documentation throughout production and shipment. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, indicating a narrow window for qualified vendors to submit proposals. While the specific pricing, payment terms, and technical drawings are not detailed here, compliance with military-grade requirements for traceability and labeling is mandatory. The contract is accessible via the DIBBS portal at the provided link, and interested parties must ensure full adherence to the defense supply chain protocols, including proper documentation of materials, processes, and inspection records to support final delivery and acceptance.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

Precision Fastener Manufacturing – PIN-RIVETThe contract calls for the manufacture and supply of 100 units of PIN-RIVET designated by NSN 5320-01-274-5732, must be produced in strict compliance with technical drawing NR 26512 GR501BB Rev F, as the component is intended for critical defense applications requiring exacting standards of precision and reliability. The work is to be performed at a specified location in San Diego, California, with the deliverables expected to meet rigorous military-grade specifications to ensure operational integrity in high-stakes environments. Subcontractors must adhere to all applicable quality and compliance requirements associated with defense manufacturing, and all production must be completed within the timeframe defined by the contract's response deadline. The solicitation, posted by the ASC Commodities Division under the Department of Defense, is classified as a subcontract opportunity with a NAICS code of 332722, indicating it pertains to screw, nut, and bolt manufacturing. Although no set-aside designation is specified, participation is open to qualified vendors capable of meeting the technical and logistical demands of the project. The contract’s official reference is accessible via the DIBBS platform, and all submissions must be finalized by the deadline of July 30, 2026. Delivery is expected to support immediate defense readiness needs, emphasizing timing, accuracy, and traceability throughout the production and quality assurance process.

ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

Threaded Rod Manufacturing – ROD, THREADED END (NSN 5306-01-134-1944)The contract seeks the manufacture and supply of threaded end rods complying with military specifications, specifically under NSN 5306-01-134-1944, with strict requirements for proper marking and preservation using Method Code 10 to ensure longevity and performance under operational conditions. Delivery is specified as F.O.B. Origin, meaning the supplier assumes responsibility for all costs and risks until the goods are loaded at the point of origin. This is a subcontract awarded under a Total Small Business Set-Aside, designated by the SBA, ensuring exclusive eligibility for small businesses as defined by FAR 19.5, with the NAICS code 332722 indicating classification within the forging and stamping industry. The solicitation, issued by the ASC Commodities Division under the Department of Defense, was posted on July 22, 2026, and responses must be submitted by August 5, 2026. Performance is not tied to a specific geographic location beyond the origin point of shipment, and the procurement is facilitated through the DIBBS platform for federal contracting.

ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

Threaded Insert Manufacturing – INSERT, SCREW THREAD (NSN 5325-00-253-2812)The contract calls for the manufacture of screw thread inserts meeting military specifications under the National Stock Number 5325-00-253-2812, with strict adherence to quality control, preservation, and bar-coded labeling requirements. All products must comply with applicable defense standards, ensuring traceability, durability, and consistency for military use. The work is subject to comprehensive inspection protocols to validate compliance with technical and logistical demands established by the Department of Defense. This is a small business set-aside subcontract under NAICS code 332722, exclusively available to small businesses as defined by the Small Business Administration. The solicitation was posted on July 22, 2026, with a response deadline of August 5, 2026. The procurement is managed by the ASC Commodities Division of the Department of Defense, though specific performance location and point of contact details are not provided. Bidders must ensure full alignment with federal acquisition requirements and be prepared to meet all labeling, packaging, and documentation standards outlined in military procurement guidelines.

ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

Precision Fastener Manufacturing – BOLT, MACHINE (NSN 5306-01-292-7479)The contract calls for the manufacture and supply of military-specification machine bolts identified by NSN 5306-01-292-7479, with stringent requirements for full traceability and quality conformance throughout production. All items must be packaged in full compliance with MIL-STD-129 standards to ensure proper identification, handling, and logistics readiness for military issuance. The requirement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, reinforcing the Department of Defense’s commitment to small business participation in defense supply chains. The North American Industry Classification System code 332722 identifies this as a fastener manufacturing activity, aligning the work with specialized industrial expertise. The solicitation was posted on July 22, 2026, with responses due by August 5, 2026, and is managed by the ASC Commodities Division under the Department of Defense. The place of performance and point of contact details are not specified, but the contract will be administered through the DLA’s DIBBS system.

ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

Manufacture of Blind Rivets (NSN 5320-01-613-3079)The contract requires the precise manufacturing of 46 blind rivets to meet military specifications for use in aerospace or defense applications, ensuring strict adherence to material compliance, dimensional accuracy, and performance standards. These rivets are identified by NSN 5320-01-613-3079 and must conform to the rigorous quality and reliability benchmarks mandated by the Department of Defense. The work is to be performed at Tracy, California, with a zip code of 95304-5000, and falls under the NAICS code 332722 for screw, nut, and bolt manufacturing. Submission of proposals is due by July 30, 2026, with the solicitation posted on July 22, 2026, indicating a tight eight-day response window. This is designated as a subcontract opportunity under the ASC Commodities Division, and all bidders must ensure their capabilities align with defense-grade requirements and deliverables.

ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

Precision Machine Screw ManufacturingThe contract involves the manufacture and delivery of 541 precision machine screws adhering to strict military specifications, requiring full compliance with traceability, marking, packaging, and preservation standards to ensure quality and readiness for defense applications. Each component must meet exacting performance and documentation requirements to support operational reliability and supply chain integrity under military oversight. The solicitation is classified as a subcontract under NAICS code 332722, issued by the ASC Commodities Division of the Department of Defense, with a response deadline of July 29, 2026. The work is intended for performance under the agency’s procurement framework, though specific delivery location details are not provided. All bids must align with federal defense procurement protocols and be submitted through the designated DIBBS platform prior to the deadline to be considered.

ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

PLUG, PROTECTIVE, DUSThe item is a protective plug designated as DUS with NSN 5340-01-661-2051, procured in a single unit under purchase request 1000237704, with delivery expected 146 days after order. The technical data associated with this item is subject to federal export control regulations under either ITAR or EAR, meaning any disclosure or transfer to foreign persons—regardless of location—is strictly prohibited without prior authorization from the Department of State or Department of Commerce. Access to this controlled data is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by the DLA controlling authority. The procurement is conducted under solicitation SPE7LX-26-U-8929, issued as a Total Small Business Set-Aside under NAICS code 332722, with responses due by August 6, 2026. The solicitation was posted on July 22, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek designated as the primary point of contact.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

SCREW, MACHINEThe contract specifies the procurement of machine screws identified by NSN 5305-00-912-7308 and part number MS27039-1-14, governed by the non-government standard NASM27039 Revision 6 dated January 30, 2026, and referenced under NASM7839 Revision 1. The item is classified as a commercial item and must conform strictly to the current revision of the applicable part standard, with past manufacturing revisions deemed acceptable only if they were current at the time of production. All threads must be inspected per System 22 of FED-STD-H28/20, with exceptions for self-locking nuts and threads below specified diameters. Sampling procedures must follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in sample lots unless otherwise stipulated. Manufacturing and identification must adhere to MIL-STD-130N for marking, in addition to manufacturer logs and material codes. Packaging complies with MIL-STD-2073-1E, with unit containers requiring Type BV, OPI M, intermediate containers of Type E5 holding ten units, and packaging codes marked as U. Marking follows MIL-STD-129, with no special handling codes applied. Palletization must comply with DLA’s packaging requirements. The screws are designated as a critical application item, requiring stringent quality control. Delivery is FOB origin with zero quantity variance, inspection and acceptance occurring at destination. Four contract line item numbers totaling 793 units are scheduled for delivery to four DLA distribution centers across North Carolina, Texas, Oklahoma, and California, with need-by dates ranging from February to July 2026 and a required delivery deadline of January 30, 2027. All shipments must adhere to DLA transportation procedures C19 and C20.

ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

NUT, SELF-LOCKING, ASSEMThe contract pertains to the procurement of self-locking nuts with assembled washers, identified by National Stock Number 5310000045119 and part number MS21224-8, manufactured to Military Specification MS21224 with Thread Class 3B and compliant with the current revision of the non-government standard NASM21224 Revision 3 dated November 29, 2019, as well as NASM25027 Revision 1 dated December 21, 2012. The item is classified as a commercial item of a type and designated as a critical application item, requiring strict adherence to specified technical and quality standards. All units must be manufactured to the latest revision of the governing standard at the time of production, and previously manufactured items meeting earlier but当时有效的 standards remain acceptable. The contract mandates full compliance with DLA’s packaging requirements (RP001), including packaging per MIL-STD-2073-1E with specific preservation methods, unit containers, and intermediate packaging codes, and marking conforming to MIL-STD-129 and MIL-STD-130N, including a Data Matrix barcode for Unique Item Identification, manufacturer’s logo, lot number, and material identification. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required in the sample lot unless otherwise specified, and all attributes not otherwise classified are treated as major. Inspection and acceptance occur at the destination, with the government retaining authority for final acceptance. Delivery is required to be completed within 102 days after award, with multiple delivery locations specified across Cherry Point North Carolina, Tinker Air Force Base in Oklahoma, and New Cumberland, Pennsylvania, each with distinct parcel post and freight addresses. The contract has three line items with quantities of 45, 1,802, and 2,374 units respectively, each priced at $45.000, $1,802.000, and $2,374.000 per unit, yielding a total estimated contract value of approximately $8.9 million. All deliveries are FOB origin, with no variance allowed in quantity. Packaging must be palletized according to DLA requirements, and transportation is subject to DLA Procurement Notes C19 and C20, including potential

ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

SCREW, CAP, SOCKET HEThe contract solicits 58 socket head cap screws designated by NSN 5305-00-514-0383 under solicitation number SPE4A6-26-Q-1183, with responses due by July 29, 2026. The requirement is open to full and open competition and falls under the Defense Logistics Agency’s procurement umbrella, with the Department of Defense’s ASC Commodities Division as the contracting office. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, and compliance with MIL-STD-130N for identification marking of U.S. military property is mandatory. The product is subject to strict export control provisions under ITAR or EAR, prohibiting unauthorized disclosure or transfer of associated technical data to foreign persons, including foreign nationals in the U.S., and DFARS 252.225-7048 applies directly. Only contractors with valid U.S./Canada Joint Certification Program status, completion of mandatory DLA export control training, and approved access authorization may obtain the controlled technical data. Cybersecurity requirements mandate adherence to CMMC Level 2 standards, necessitating either a self-assessment or certification by an approved third-party assessment organization. Packaging must meet DLA’s official procurement packaging specifications, and all non-accepted supplies must have government identification removed. Items require physical identification marking directly on the bare part per RQ017. Drawings are accessible exclusively through the DLA DIBBS portal during the open solicitation period, and all contractual obligations are enforceable from the solicitation issuance date. The primary point of contact for inquiries is Vincent Price, reachable via email and phone provided. All participants must ensure full compliance with these conditions to qualify for award consideration.

ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Hazardous Materials Compliance and SDS ManagementThis contract requires strict adherence to hazardous material restrictions, prohibiting the use of substances such as hexavalent chromium and mercury in all materials or components supplied under the agreement. Compliance with the Occupational Safety and Health Administration’s Hazard Communication Standard OSHA 29 CFR 1910.1200 is mandatory, meaning that Safety Data Sheets must be provided accurately and promptly for all chemical substances. The contractor must also fully comply with the Federal Acquisition Regulation clause FAR 52.223-21 and the Defense Federal Acquisition Regulation Supplement environmental clauses, ensuring that all operations and deliveries align with federal environmental protections and sustainability requirements. The work is classified under NAICS code 541620 and is structured as a subcontract issued by the ASC Commodities Division of the Department of Defense, with performance required at a designated location in New Cumberland, Pennsylvania, zip code 17070-5002. Responses must be submitted no later than July 30, 2026, following the solicitation posted on July 22, 2026, via the DIBBS portal.

Environmental Consulting Services

POSTED

about 16 hours ago

DEADLINE

Quality Inspection and Test Equipment CalibrationThe contract requires the performance of final inspections in accordance with FAR 52.246-2 to verify compliance with specified quality standards. All test and measuring equipment used in the inspection process must be calibrated to the RT001 standard and traceable to NIST-certified benchmarks to ensure accuracy and reliability in quality assurance outcomes. The work is to be conducted at the place of performance in New Cumberland, Pennsylvania, with the ZIP code 17070-5002, and the contracting entity is the ASC Commodities Division under the Department of Defense. This is a subcontract classified under NAICS code 541330 for scientific and technical consulting services, and responses must be submitted by the deadline of July 30, 2026. The solicitation is accessible via the DIBBS platform, and no set-aside provisions or small business designations are specified.

Engineering Services

POSTED

about 16 hours ago

DEADLINE

Military Item Marking and LabelingThe contract requires the application of permanent bare item markings in strict compliance with RQ017 and MIL-STD-129 standards, encompassing the placement of barcode labels, hazardous material warnings, and proper handling procedures for rejected items, including complete removal of all prior identifiers. All marking and labeling activities must adhere to military specifications to ensure traceability, safety, and regulatory compliance throughout the supply chain. The work is to be performed at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation falls under the NAICS code 561910 and is structured as a subcontract, with responses due by July 30, 2026. The contracting entity is the ASC Commodities Division under the Department of Defense. The contract is accessible via the DIBBS platform and requires fulfillment of all technical and procedural requirements without exception, ensuring that each marked item meets the stringent documentation and labeling standards mandated for military logistics and inventory management.

Packaging and Labeling Services

POSTED

about 16 hours ago

DEADLINE

Military-Compliant Packaging and PalletizationThe contract requires the provision of packaging and palletization services that strictly adhere to MIL-STD-2073-1E and RP001 standards, ensuring all materials and methods meet military-grade requirements for protection, durability, and environmental compliance. This includes complete unit containment, intermediate wrapping techniques, appropriate selection of exterior containers, and DLA-standard palletization procedures using mercury-free materials exclusively. All work must be performed to sustain the integrity of defense-grade equipment during storage and transport under varying environmental conditions. The solicitation is issued as a subcontract under the NAICS code 561910 by the ASC Commodities Division within the Department of Defense, with performance required at the facility in New Cumberland, Pennsylvania, zip code 17070-5002. The opportunity is open for response until July 30, 2026, with proposals due no later than 5:00 PM Eastern Time. Interested parties must ensure full alignment with all technical specifications and regulatory mandates to qualify, as noncompliance may result in disqualification or contract cancellation. The listing can be accessed online via the DIBBS platform for full submission instructions and requirements.

Packaging and Labeling Services

POSTED

about 16 hours ago

DEADLINE

Precision Sleeve Bearing Manufacturing and SupplyThe contract calls for the manufacture and supply of six precision sleeve bushings identified by NSN 3120012669315, aligned with strict military specifications covering material composition, dimensional tolerances, and quality assurance standards. Compliance with these specifications is mandatory to ensure functional integrity and interoperability in defense applications, with all items required to meet or exceed the required performance benchmarks under operational conditions. The work must be completed in accordance with established defense manufacturing protocols, ensuring traceability, inspection, and documentation at every stage of production. This is a subcontract under the Department of Defense, managed by the ASC Commodities Division, with performance due at the facility located in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 22, 2026, and responses are due by July 30, 2026, leaving a narrow window for qualified suppliers to submit proposals. The NAICS code 332994 indicates this falls under Other Miscellaneous Fabricated Metal Product Manufacturing, signaling a specialized niche production requirement. No set-aside status is designated, and the contract is open to any eligible subcontractor capable of fulfilling the technical and logistical demands of the order.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 16 hours ago

DEADLINE

Sustainable Products & Packaging Compliance SupportThe contract seeks support for advising on or supplying sustainable packaging materials that meet Federal Sustainability Program requirements and comply with DFARS 252.223-23, emphasizing biobased, recycled, or energy-efficient solutions. Deliverables must align with Department of Defense environmental stewardship goals and ensure procurement practices prioritize reduced environmental impact throughout the packaging lifecycle. The effort is structured as a subcontract under NAICS code 541620, with performance directed to APO 96278-2069, indicating a focus on military logistics and overseas operational needs. All materials and guidance must demonstrate verifiable sustainability credentials and maintain full adherence to federal regulations governing defense procurement. Responses are due by July 30, 2026, following a posted solicitation date of July 22, 2026, through the DIBBS platform. While no specific set-aside designation is provided, the requirement is tied to the ASC Commodities Division under the Department of Defense, signaling its critical role in supporting defense supply chain resilience through environmentally responsible packaging. Suppliers must be prepared to validate compliance with federal sustainability mandates and deliver solutions scalable across military operations, with an emphasis on lifecycle sustainability, material sourcing transparency, and energy efficiency in production and transportation.

Environmental Consulting Services

POSTED

about 16 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract seeks qualified vendors to provide hazard communication support for hazardous materials, ensuring full compliance with OSHA’s 29 CFR 1910.1200 and MIL-STD-129 standards. This includes accurately identifying hazardous substances and applying properly formatted, compliant warning labels to meet federal and military requirements. The work is tied to the Department of Defense’s ASC Commodities Division and is to be performed at the APO location with ZIP code 96278-2069. The solicitation is structured as a subcontract under NAICS code 541690, with responses due by July 30, 2026, and was posted on July 22, 2026. Bidders must be prepared to deliver services that align precisely with regulatory stipulations for labeling and communication to support safe handling and transportation of hazardous materials within defense logistics operations.

Other Scientific and Technical Consulting Services

POSTED

about 16 hours ago

DEADLINE

Packaging and Preservation ServicesThe contract requires the provision of military-compliant packaging, preservation, and palletization services in strict adherence to MIL-STD-2073-1E and DLA RP001 standards. This includes thorough cleaning and drying procedures to ensure the integrity and longevity of defense materials during storage and transit, with all items properly secured and arranged on pallets to meet federal military logistics specifications. The work must be executed to sustain operational readiness and ensure compliance with Department of Defense preservation protocols. This is a subcontract opportunity issued by the ASC Commodities Division under the Department of Defense, with a performance location at Fort Leonard Wood, Missouri, zip code 65473-5000. The NAICS code 493190 indicates classification under Other Support Activities for Transportation, reflecting the logistical and handling nature of the services. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026, requiring interested parties to submit proposals within that window to be considered for award.

Other Warehousing and Storage

POSTED

about 16 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires the preparation and submission of Material Safety Data Sheets and hazard labels for components used in cable assembly production, ensuring full compliance with OSHA and Defense Logistics Agency standards. All documentation must accurately reflect the hazardous properties of materials and meet federal regulatory requirements for workplace safety and transportation. The work is performance-based and must be executed to support the ASC Commodities Division’s operations at Fort Leonard Wood, Missouri, with strict adherence to timelines and technical specifications outlined by the Department of Defense. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026, and is structured as a subcontract under NAICS code 541690, which covers other scientific and technical consulting services. There is no set-aside designation specified, and the contract does not indicate whether it is targeted toward a specific small business category. All deliverables must be submitted in a manner approved by the contracting entity, and failure to meet compliance standards could result in rejection of documentation, delays in procurement, or contractual penalties. Performance is expected to occur at Fort Leonard Wood, and while no point of contact is listed, all submissions must reference the solicitation number SPE4A626T09BZ via the DIBBS portal.

Other Scientific and Technical Consulting Services

POSTED

about 16 hours ago

DEADLINE

Cable Assembly Manufacturing and TestingThe contract calls for the manufacture, testing, and delivery of seven military-spec electrical cable assemblies, encompassing the full production lifecycle from raw material sourcing to final quality verification. Each unit must meet stringent military performance standards, with rigorous testing protocols ensuring reliability under operational conditions, and all work must adhere to approved quality control and packaging guidelines to guarantee integrity during transit and field use. The deliverables are intended for use at Fort Leonard Wood, Missouri, with all production and testing activities expected to comply with the specified technical and regulatory requirements. The solicitation, classified as a subcontract under NAICS code 335931, is managed by the ASC Commodities Division of the Department of Defense and was posted on July 22, 2026, with a response deadline of July 30, 2026. Interested parties must submit proposals through the DIBBS platform by the deadline, and all work must be performed in alignment with defense-grade standards, ensuring interoperability and durability. The contract does not specify set-aside provisions, and the place of performance is fixed at Fort Leonard Wood, where final acceptance and inspection will occur.

Current-Carrying Wiring Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

Packaging, Marking, and Shipping ServicesThe contract requires comprehensive packaging, marking, and shipping services for finished resilient mounts in full compliance with MIL-STD-129 standards, ensuring all items are properly labeled, documented, and prepared for government delivery. This is a total small business set-aside under SBA guidelines, exclusively available to small businesses as defined by the SBA, with the NAICS code 561910 indicating it falls under other support activities for transportation. The work must be performed to meet the U.S. Department of Defense’s requirements, specifically under the ASC Commodities Division, and all shipments must be directed to government-designated locations without exception. The solicitation is open with a response deadline of July 31, 2026, and is structured as a subcontract opportunity, meaning the winning entity will likely serve as a supplier or service provider to a prime contractor involved in the larger defense logistics chain. All operations must adhere strictly to military packaging and marking protocols to ensure accountability, traceability, and readiness upon receipt. While the exact place of performance and point of contact are not specified, the contract is administered through the DLA DIBBS system, and interested parties must submit their proposals through the official portal before the deadline to be considered.

Packaging and Labeling Services

POSTED

about 16 hours ago

DEADLINE