Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Fastener Manufacturing for Defense Applications

Active

Federal

Response Deadline08/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture and supply of 374 close tolerance bolts with NSN 5306011407990, classified as Critical Application Items for defense use, necessitating strict adherence to military specifications and full traceability throughout production and delivery. These components are essential for high-reliability systems and must meet exacting quality, material, and performance standards to ensure operational safety in critical defense platforms. The work is to be performed in Jacksonville, Florida, with a firm deadline for proposals on August 13, 2026, and was posted on August 5, 2026, under a subcontract solicitation designated as a HUBZone Set-Aside, targeting small businesses located in historically underutilized business zones. The North American Industry Classification System code 332722 confirms the focus on screw, bolt, and nut manufacturing, and the awarding activity is the ASC Commodities Division under the Department of Defense.

General Info

Manufacture and supply 374 critical defense bolts per military specs, HUBZone set-aside, Jacksonville, Florida, due August 13, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

JACKSONVILLE, FL, 32212-0103, US

Set-Aside

HZC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of 374 units of close tolerance bolts (NSN: 5306011407990) designated as Critical Application Items for defense use, requiring compliance with military specifications and traceability standards.

Similar Contracts

Same NAICS industry code

Manufacturing of Mounting Bracket (NSN: 5340015718473)Six precision-manufactured mounting brackets, identified by NSN 5340015718473, are to be produced in full compliance with military specifications, including adherence to DLA technical requirements, MIL-STD-129 for labeling, and ASTM D3951 for packaging to ensure uniformity and readiness for military logistics. The work must be executed to exacting standards to support defense operations, with all units slated for delivery to the designated place of performance in New Cumberland, Pennsylvania, zip code 17070-5002. This subcontract, posted by the Electrical Devices Division under the Department of Defense, is classified under NAICS code 332722 and requires proposals to be submitted by the deadline of August 17, 2026, with no set-aside provisions applied. The solicitation is accessible via the DIBBS platform, and the vendor must ensure all documentation, labeling, and packaging strictly follow federal military standards to meet contractual obligations.

ELECTRICAL DEVICES DIV

POSTED

about 8 hours ago

DEADLINE

Bumper Supply with Export-Controlled Technical Data ComplianceThe contract calls for the supply of 213 units of a bumper identified by NSN 5340015779616, with strict adherence to U.S. export control regulations including ITAR and EAR, requiring proper handling, storage, and dissemination of controlled technical data throughout the supply chain. All parties involved must implement compliant procedures for technical data management and ensure that any hazardous materials associated with the bumper are properly labeled and documented in accordance with applicable federal standards. The action is structured as a subcontract under NAICS code 332722 and is managed by the Department of Defense through the LAND SUPPLY CHAIN office, with performance required at New Cumberland, Pennsylvania, 17070-5002. Bidders must submit responses by August 17, 2026, and must be prepared to demonstrate full regulatory compliance and capability to handle sensitive defense-related components under stringent security protocols.

LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

NUT, PLAIN, HEXAGON

Solicitation # SPE4A6-26-R-XB62

The contract is for the procurement of 300 plain hexagon nuts, identified by NSN 5310-01-368-5549, under solicitation SPE4A6-26-R-XB62, with a firm fixed price and no tolerance for quantity variation. Delivery is required within 240 days after award, with inspection and acceptance occurring at the contractor’s origin facility. The item is classified as a Critical Safety Item and a Critical Application Item, necessitating strict adherence to quality, traceability, and documentation requirements. All suppliers must comply with SAE AS9100 higher-level quality standards, MIL-STD-1916 or equivalent zero-based sampling plans, and strict physical identification mandates per RQ017, including bare item marking with lot and serial numbers, contractor and manufacturer CAGE codes, and part number. Packaging must follow MIL-STD-2073-1E with preservation method 33, and marking of all unit packs must conform to MIL-STD-129, including 2D barcoding, and palletization must meet DLA’s RP001 requirements. No special marking is required beyond these standards. The contract includes a comprehensive set of FAR and DFARS clauses governing changes, subcontracting, labor practices, trafficking, termination, counterfeit part avoidance, electronic parts sourcing, transportation, and cybersecurity, with multiple deviations authorized under deviation 2026-00038. All waivers or deviations must be reviewed and approved by the DSC Contracting Officer. Pricing is not specified, but the total contract value is capped at $350,000 across the five-year indefinite delivery period. Payment is mandatory via WAWF, and offers must be submitted through DIBBS or by email, fax, or hard copy to the designated DLA point of contact by August 14, 2026. The award is based on a trade-off evaluation where past performance, particularly quality and delivery history captured through PPIRS-SR, is significantly more important than cost or other non-price factors. Offerors must be registered in SAM with valid UEI and CAGE codes, and while socioeconomic status is solicited, no affirmative responses are required to be completed within the solicitation itself. All technical and quality requirements are governed by the DLA Master List, and the contractor is responsible for ensuring full compliance from production through delivery, including flow-down of requirements to subcontractors

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

PLUG, MACHINE THREAD

Solicitation # SPE4A7-26-Q-0974

The contract pertains to the procurement of seven units of a machine thread plug with NSN 5365-00-854-2899, issued under solicitation number SPE4A7-26-Q-0974 by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 182 days after contract award, and responses must be submitted by August 15, 2026. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, meaning any disclosure to foreign persons—even within the United States—is prohibited without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled information, and only contractors certified under the US/Canada Joint Certification Program, with completed DLA training and approved access, are permitted to receive the technical data. The primary point of contact for the solicitation is Mykhara Robinson, reachable via email at mykhara.robinson@dla.mil.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

COLLAR, PIN-RIVET

Solicitation # SPE4A6-26-T-12TU

The contract pertains to the procurement of 822 units of COLLAR, PIN-RIVET with NSN 5320-01-596-1012 and part number HL379-6, sourced from approved manufacturers including HOWMET GLOBAL FASTENING SYSTEMS INC and HI-SHEAR CORPORATION. Delivery is required FOB origin within 121 days, with no variance allowed in quantity, and inspection and acceptance must occur at the manufacturing origin in compliance with stringent quality standards. All items must adhere to MIL-STD-2073-1E packaging requirements and MIL-STD-129 marking standards, with no special marking codes applied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated. Critical threads must be gaged per SAE AS8879 Category 1 or MIL-S-7742, excluding self-locking nuts and small-diameter threads. Documentation for source approval is mandated, and all supplies must meet tailored higher-level quality requirements. Item Unique Identification is not required per Service customer direction. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics follow DLA procedural notes C19 and C20. The contract was solicited under SPE4A6-26-T-12TU with a response deadline of August 13, 2026, and a required ship date of December 13, 2026.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

SCREW, CAP, SOCKET HE

Solicitation # SPE4A6-26-T-12TP

The contract specifies the procurement of 65 socket head cap screws identified by NSN 5305-01-660-8339 and part number NAS1352-8-LN-28, manufactured to the current revision of the non-government standard NAS1352 Revision 13 dated 05/31/2016. All hardware must comply with this standard, and previously approved revisions are acceptable only for items manufactured before the solicitation date. The item is classified as a critical application component, requiring strict adherence to physical identification and bare item marking requirements under RQ017, and must be marked in accordance with MIL-STD-129 without special marking codes. Packaging must conform to MIL-STD-2073-1E, including preservation method 33, dry conditions, and use of BV unit containers, with palletization following DLA's packaging requirements. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and marking except for specific exemptions like batteries or instruments as defined by NAVSEA, and any such exempt items must include a secondary containment. Sampling for quality verification follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; zero non-conformances are required unless otherwise stated. The item is delivered FOB origin with a 109-day delivery window, inspection and acceptance occurring at destination, and no variance is permitted in quantity. Delivery is directed to DLA Distribution at the New Cumberland, Pennsylvania facility.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE4A6-26-T-12TT

The contract solicitation SPE4A6-26-T-12TT calls for the procurement of 276 units of a BOLT, SHEAR designated as part number NAS1304-27, manufactured in accordance with the non-government standard NAS1303 through NAS1320 Revision 13 dated January 31, 2001, and referenced to drawing 13873 EI-013653161 Revision dated July 10, 2026. The item is classified as a critical application with no shelf life requirement. All hardware must conform to the current revision of the applicable part standard, and previously manufactured items under prior revisions are acceptable only if they were produced during the time those revisions were current. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards where conflicts exist. Thread inspection for Class 3A and 3B threads must follow System 22 of FED-STD-H28/20, excluding self-locking nuts and threads smaller than .190 inch internal or .138 inch external diameter. Item identification markings must comply with paragraph 4.1.b(2) of MIL-STD-130N, including manufacturer’s logo, lot number, and material identification, but Item Unique Identification (IUID) is waived under DFARS 252.211-7003(c)(1)(i). Packaging must adhere to ASTM D3951 unless overridden by DLA requirements, with palletization following RP001 and labeling per MIL-STD-129. All shipments are to be delivered FOB Origin to DLA Distribution Depot Oklahoma at Tinker AFB, with inspection and acceptance also occurring at origin. Solicitation requires adherence to MIL-STD-1916 or ASQ H1331 Table 1 for sampling, with zero non-conformances mandated unless otherwise specified; unspecified attributes are considered major with an AQL of 1.0. A First Article Test (FAT) is required for one unit, priced at $1.00, but no award will be made if the requirement is waived. The contractor must implement a quality system compliant with SAE AS9003 or ISO 9001 tailored to AS9003 and issue a Certificate of Conformance per FAR 52.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

NUT, SELF-LOCKING, AS

Solicitation # SPE4A6-26-T-12UT

The contract specifies the procurement of 28 self-locking nuts with assembled washers, identified by NSN 5310-00-163-7561, under solicitation SPE4A6-26-T-12UT, with a response deadline of August 13, 2026, and a delivery requirement of 256 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance tied to the revision in effect on the solicitation or award date depending on acquisition size. The item is subject to strict export controls under ITAR or EAR, prohibiting any unauthorized disclosure of technical data to foreign persons, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access the controlled data. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are classified with verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. Quality conformance inspections, measuring equipment standards, and DLA packaging requirements are mandated, and government identification must be removed from rejected items. Cybersecurity compliance requires CMMC Level 2 certification by a certified third-party assessment organization, and physical identification markings on the bare item are required. The point of contact for inquiries is Molitauoleava Langi, and performance is to occur in New Cumberland, Pennsylvania.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

GOVERNMENT FIRST ARTIC

Solicitation # SPE4A6-26-T-12UY

The contract pertains to the procurement of a PIN-RIVET item identified by NSN 5320016069638, with a quantity of 260 units to be delivered in 410 days under FOB Origin terms. The item is classified as a commercial item and a critical application component governed by the non-government standard NAS4450 Revision 4 and referenced in Technical Data Package Rev E Gen 5, with additional alignment to NAS4444 Revision 6. Inspection and acceptance occur at the manufacturer’s origin, with strict adherence to MIL-STD-1916 or ASQ H1331 for sampling, requiring zero non-conformances for all samples unless otherwise stipulated, and assigning AQL levels of 0.1, 1.0, and 4.0 for critical, major, and minor attributes respectively. Packaging must conform to MIL-STD-2073-1E with a pack code of U, preservation method CLNG/DRY, unit container as a box, and intermediate container specified as E5. Marking is required to meet MIL-STD-129 with no special marking codes applied. The contract includes a First Article Test requirement for one unit at $1.00, which remains contingent upon government evaluation and potential waiver. All technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, including specific provisions for quality conformance, physical identification, removal of government identification from non-accepted supplies, and tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. Certificate of Quality Compliance (CoQC) documentation must be submitted per CDRL COQC26124. The item is subject to safeguarding requirements for covered defense information under 252.204-7012 and compliance with the Hazard Communication Standard (29 CFR 1910.1200). Payment must be processed via Wide Area WorkFlow, and delivery is directed to DLA Distribution at New Cumberland, PA. The solicitation prohibits quantity variance and requires full conformance to the current revision of the governing standard, with prior revisions accepted only for items manufactured before this solicitation date. The contract includes clauses addressing combating trafficking in persons, small business representation, patent authorization, and cybersecurity incident reporting. No options, extensions, or alternate pricing structures are included, and the total estimated contract value is approximately $4,7

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

SCREW, CAP, HEXAGON HEAD

Solicitation # SPE4A6-26-T-12TX

The contract specifies the procurement of 494 units of a hexagon head cap screw with NSN 5305-00-907-0044 under solicitation SPE4A6-26-T-12TX, with a delivery requirement of 170 days and FOB origin terms. All items must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including specific packaging, marking, and inspection protocols per MIL-STD-2073-1E and MIL-STD-129. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are assigned verification levels VII, IV, and II. The screw must conform to NASM35307 Revision 2 and other referenced specifications, with no intentional addition of mercury or mercury-containing compounds in any component or contact material, except for certain exempted applications like batteries or sensors as defined by NAVSEA; portable devices containing mercury must include a secondary containment. Packaging and preservation must follow DLA requirements, prohibiting mercury in preservation materials, with palletization and unit packaging details outlined under RP001 and QUP 050. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 31, 2027, and the original delivery date set for July 16, 2027. The contract enforces a strict zero variance in quantity, with inspection and acceptance occurring at origin, and all documentation, labeling, and compliance obligations are mandatory for both manufacturers and non-manufacturers.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

NUT, PLAIN, SLOTTED, HEXA

Solicitation # SPE4A6-26-T-12UH

The contract pertains to the procurement of 251 plain, slotted hexagon nuts identified by NSN 5310-01-216-3677 under solicitation SPE4A6-26-T-12UH, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 164 days of award, with full technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers, and subject to the revision in effect on the solicitation issue date. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Inspection and acceptance may occur at origin, and quality conformance inspections are required. A Certificate of Conformance is authorized unless explicitly withheld by a Quality Assurance Letter of Instruction. Technical data associated with this item is subject to export control under either ITAR or EAR, restricting unauthorized disclosure to foreign persons, regardless of location, and applies to all contractors, including foreign subsidiaries. Access is limited to DLA contractors certified under the US/Canada Joint Certification Program, who have completed mandatory training on handling export-controlled data and been formally approved by DLA. The data is further governed by DFARS 252.225-7048. Covered defense information applies, and the place of performance is specified as New Cumberland, PA, with ZIP code 17070-5002. The solicitation opened on August 5, 2026, with a response deadline of August 13, 2026, and is classified under NAICS code 332722. Primary point of contact is Krystle Bailey, reachable via email and phone provided.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

SCREW, CAP, SOCKET HEAD

Solicitation # SPE4A6-26-T-12VB

The contract is for the procurement of 32 units of SCREW, CAP, SOCKET HEAD, identified by NSN 5305-01-330-6346, and is being procured under a fully competitive process in compliance with military and federal specifications. The purchase request number is 7017742042, and the delivery is scheduled 170 days after award. The solicitation, numbered SPE4A6-26-T-12VB, was posted on August 5, 2026, with a response deadline of August 13, 2026. The procurement falls under NAICS code 332722 and is managed by the ASC Commodity Division within the Department of Defense. The place of performance is in Tracy, California, with a ZIP code of 95304-5000. Primary point of contact for the solicitation is Nyjel Knowlin, reachable at nyjel.knowlin@dla.mil. The acquisition is conducted through the DIBBS platform, with the official solicitation page accessible via the provided UI link.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Erosion Control and Landscaping

Landscaping Services

POSTED

about 8 hours ago

DEADLINE

Traffic Control and Signage

All Other Support Services

POSTED

about 8 hours ago

DEADLINE

Steel Fabrication and Erection

Fabricated Structural Metal Manufacturing

POSTED

about 8 hours ago

DEADLINE

Surveying and Layout Services

Surveying and Mapping (except Geophysical) Services

POSTED

about 8 hours ago

DEADLINE

Environmental Site Assessment and Remediation

Environmental Consulting Services

POSTED

about 8 hours ago

DEADLINE

Asphalt Paving and Site Surfacing

Highway, Street, and Bridge Construction

POSTED

about 8 hours ago

DEADLINE

Concrete Forming and Placement

Poured Concrete Foundation and Structure Contractors

POSTED

about 8 hours ago

DEADLINE

Plumbing and Piping Systems Installation

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 8 hours ago

DEADLINE

Ready-Mix Concrete Supply

Ready-Mix Concrete Manufacturing

POSTED

about 8 hours ago

DEADLINE

Electrical Installation and Wiring Services

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 8 hours ago

DEADLINE

Small Business Subcontracting Participation (DBE/MBE/WBE)The contract opportunity enables small businesses owned by disadvantaged, minority, women, or veteran entrepreneurs to engage in subcontracting roles within the supply chain, specifically in areas such as logistics, packaging, and component supply. Targeted at businesses classified as DBE, MBE, or WBE, this initiative supports broader federal goals of increasing inclusion and economic growth among underrepresented business owners. The solicitation is tied to the NAICS code 484220, which corresponds to general freight trucking, indicating that transportation and distribution services are central to the scope of work. Performance will be centered at Hill Air Force Base with the zip code 84056-5734, and the contracting activity falls under the ASC Commodities Division within the Department of Defense. Interested parties must submit their responses by the deadline of August 13, 2026, with the opportunity posted on August 5, 2026. This is a subcontracting opportunity, not a prime contract, meaning businesses will be providing goods or services to a prime contractor fulfilling the larger DoD obligation. There is no formal set-aside designation specified, but the focus on minority-, women-, and veteran-owned enterprises signals a strong preference for participation from these groups. The contract is accessible via the DIBBS portal, and while no point of contact is listed, bidders are expected to review the full solicitation details on the provided link for submission instructions and technical requirements.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 8 hours ago

DEADLINE

Raw Material Supply for Metal FabricationThe contract involves the supply of certified raw metal stock including brass, bronze, and steel that must meet DLA technical specifications for use in the manufacture of sleeve bushings. Materials must be fully compliant with required standards to ensure suitability for defense-related fabrication purposes. The solicitation is issued as a subcontract under NAICS code 331492 by the ASC Commodities Division of the Department of Defense, with performance expected at Hill Air Force Base, UT, zip code 84056-5734. The opportunity was posted on August 5, 2026, with responses due by August 13, 2026, and is accessible through the DIBBS platform. No set-aside provisions are specified, and the contract is open to qualified suppliers capable of delivering certified metals in accordance with stringent military-grade requirements.

Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

about 8 hours ago

DEADLINE