Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Fastener Supply – Hexagon Cap Screws

Active

Federal

Response Deadline08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of five hexagon cap screws, identified by NSN 5305-01-676-5331, manufactured to meet military specifications and Department of Defense Logistics Agency technical standards. These precision fasteners are required for critical applications where adherence to stringent quality and performance criteria is essential. The solicitation is issued as a subcontract under NAICS code 332722, indicating the scope falls within the manufacturing of screw, bolt, and nut manufacturing. The proposal must be submitted by August 7, 2026, with the contract opportunity posted on July 30, 2026, through the DIBBS platform. Performance of the contract will be centered in New Cumberland, Pennsylvania, with the issuing agency being the ASC Commodities Division under the Department of Defense. There is no set-aside designation specified, and all responses must align fully with the technical requirements outlined by DLA to ensure compliance and eligibility for award.

General Info

Five military-spec hexagon cap screws to be supplied by August 7, 2026, for DoD use in Pennsylvania.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 5 units of SCREW, CAP, HEXAGON H, NSN: 5305-01-676-5331, compliant with military specifications and DLA technical standards.

Similar Contracts

Same NAICS industry code

Lock Washer Manufacturing and SupplyThe contract entails the manufacture and supply of 3,334 lock washers compliant with military specifications, identified by NSN 5310010655900 and part number 2469HX. The work is classified as a subcontract under NAICS code 332722 and is assigned to the Department of Defense through its LAND SUPPLIER OPNS ENGINES. Performance is required at Tracy, California, with the zip code 95304-5000 designated as the place of performance. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, with no set-aside designation specified. All delivered items must meet exacting military standards to ensure compatibility and reliability in defense applications. The contract details are accessible via the DIBBS platform at the provided URL.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Corrosion Preventive Anode ManufacturingThe contract is for the manufacture of corrosion preventive anodes that must meet stringent military and quality standards, including MIL-STD-1916 and ASTM D3951, with rigorous attribute verification and acceptance sampling based on Acceptable Quality Level criteria. The work requires strict adherence to technical specifications and quality control measures to ensure performance and reliability in demanding environments. The anodes are intended for defense-related applications, necessitating compliance with documented inspection and testing protocols to validate conformance throughout production. This is a subcontract solicitation issued by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 7, 2026, and a posting date of July 30, 2026. The NAICS code 332722 identifies the industry classification for primary metal products manufacturing. Performance of the contract is required at New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the physical location where deliverables must be produced or delivered. The solicitation is accessible through a public DIBBS link, and while details about set-aside status or point of contact are not provided, the requirement is clearly scoped toward qualified subcontractors capable of fulfilling high-integrity defense manufacturing standards.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Fastener Manufacturing

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Machine Screw Manufacturing and SupplyThe contract is for the manufacture and supply of a precision machine screw identified by NSN 5305-01-723-0863, produced to meet military specifications, including all required packaging, labeling, and delivery within 20 days of award. The work must be performed in accordance with strict defense standards, ensuring full compliance with quality, dimensional, and material requirements for military use. The place of performance is specified as Mechanicsburg, Pennsylvania, ZIP 17050-2411, indicating the location where the product will be delivered or shipped from. This subcontract is issued under the Department of Defense, specifically by the ASC Commodities Division, and falls under the NAICS code 332722 for Machine Shop and Related Services. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, indicating a tight turnaround for proposers to submit qualifications and pricing. The contract is not designated for any specific set-aside status and is available to eligible subcontractors capable of fulfilling the technical, logistical, and timeline demands of the requirement. All details point to a time-sensitive procurement focused on reliable, high-precision fastener production for military applications.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Machine Screw Supply – NSN 5305-01-254-2551

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Machining and Surface FinishingThe contract titled Precision Machining and Surface Finishing requires execution of high-precision machining, welding, and surface finishing operations strictly in accordance with ASME B46.1 for surface texture and ANSI/AWS A2.4 for welding symbols as detailed in engineering drawings. All work must meet exacting technical specifications and quality standards derived from these industry codes to ensure functional integrity and compliance with defense-grade requirements. The contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, and it is classified under NAICS code 332722 for Machine Shops. The place of performance is designated as Jacksonville, Florida, with the 32212-0103 ZIP code, and the contracting agency is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. This solicitation is open for response until August 7, 2026, with a posted date of July 30, 2026, providing a seven-day window for interested parties to submit proposals. The opportunity is listed on the DIBBS platform under solicitation number SPE4A726T602Q, and all submissions must be made through the designated online portal. While specific contact information is not provided, bidders are expected to review the full solicitation details on the DIBBS website to confirm all requirements, including any additional documentation, certifications, or delivery terms that may apply beyond the stated technical criteria.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Fastener Manufacturing – SetscrewsThe contract entails the manufacture of 182 setscrews identified by NSN 5305-00-215-7324, with strict compliance required to military specifications governing material composition, thread configuration, hardness levels, and surface finish. The work is classified as a subcontract under NAICS code 332722 and is managed by the ASC Commodities Division of the Department of Defense, with performance located in Tracy, California, at ZIP code 95304-5000. The solicitation was posted on July 30, 2026, and responses must be submitted by August 7, 2026, requiring precise adherence to technical standards and delivery timelines. The contract does not specify any set-aside provisions and is accessible through the DIBBS platform for interested vendors.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Fastener Manufacturing – PIN-RIVET ProductionThe contract calls for the manufacture of 50 units of PIN-RIVET designated by NSN 5320-01-513-5641, requiring strict adherence to military specifications that encompass precision machining, forging, or casting processes to ensure structural integrity and performance. All units must comply with DLA quality control standards and specific marking requirements to guarantee traceability and compliance throughout the supply chain. The work is to be performed at Cherry Point, North Carolina, with a delivery timeline aligned to the contract’s deadline for responses on August 7, 2026. This is classified as a subcontract under NAICS code 332722, indicating it pertains to screw, nail, and other fastener manufacturing, and is procured through the ASC Commodities Division of the Department of Defense for defense-related applications.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Protective Cap Plug Manufacturing and SupplyThe contract entails the manufacture and delivery of 18 units of a protective cap plug identified by NSN 5340-01-589-9190, with strict adherence to Department of Defense standards including DLA specifications, MIL-STD requirements, and applicable environmental regulations. All items must meet rigorous quality and compliance benchmarks to ensure suitability for military use, with performance and material integrity verified through established testing and certification protocols. The place of performance is designated for New Cumberland, Pennsylvania, with the entire production and delivery cycle expected to align with the stringent timelines set by the Department of Defense. This subcontract opportunity is posted under NAICS code 332722, indicating the focus on forging and stamping operations, and is managed by the Land Supply Chain division under the Department of Defense. The solicitation opened on July 30, 2026, with a firm deadline for responses set for August 10, 2026, leaving a narrow window for bidders to submit proposals that fully address technical, logistical, and compliance obligations. Although the contract does not specify a set-aside classification, all participants must demonstrate capacity to fulfill the exact quantity, specifications, and delivery schedule without deviation, as failure to comply could result in contract cancellation or penalties. The official solicitation is accessible via the DIBBS portal for further detailed submission guidelines.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Metal Bracket ManufacturingA subcontract has been issued for the manufacture and delivery of one precision metal bracket identified by NSN 5340-01-612-8547, in full compliance with Department of Defense specifications. The work encompasses all aspects of production including material sourcing, fabrication, inspection, and adherence to military-grade packaging and labeling requirements, ensuring the component meets exacting operational standards. The place of performance is designated as Tracy, California, with the delivery expected to align with DLA’s logistical and quality protocols. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, under the NAICS code 332722 which pertains to die stamping and related metal forming operations. This contract falls under the LAND SUPPLY CHAIN organization within the Department of Defense, and while no set-aside designation is specified, it is structured as a subcontract opportunity accessible to qualified vendors capable of fulfilling military-grade manufacturing demands. The full details and submission requirements can be accessed through the provided DIBBS link.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Fastener Manufacturing – Socket Head Cap Screws

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Fastener Manufacturing and SupplyThe contract calls for the manufacture and supply of between 1,189 and 1,890 units of self-locking, double hexagon nuts identified by NSN 5310000552350, all of which must fully comply with military specifications governing material composition, dimensional accuracy, and mechanical performance. These components are critical for high-reliability applications and must be produced to exacting standards to ensure interoperability and durability under demanding operational conditions. The work is to be performed at a designated location in Texarkana with a zip code of 75507-5000, and all deliveries must meet the timeline specified under the contract terms. Issued under the NAICS code 332722 for screw, nut, and bolt manufacturing, this is a subcontract opportunity managed by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, and interested parties are directed to the DIBBS portal for full details and submission guidelines. While no set-aside designation or point of contact is provided, the requirement reflects a strategic procurement need for standardized fasteners essential to defense systems and equipment.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Product Verification Testing CoordinationThe contract requires the preparation, marking, and shipment of Product Verification Test (PVT) samples in full compliance with Department of Defense standards, including proper segregation of materials and complete documentation to ensure traceability and regulatory adherence. All activities must be conducted under strict guidelines to meet the DoD’s quality and procedural requirements for verification testing. The effort is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, and falls under the NAICS code 541380 for other scientific and technical consulting services. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, and is managed by the ASC Commodities Division within the Department of Defense. Performance will occur at an unspecified location, and the award is expected to follow competitive procedures under the Federal Acquisition Regulation.

Testing Laboratories and Services

POSTED

about 11 hours ago

DEADLINE

Supply Chain & Logistics Compliance ManagementThe contract requires management of specific DLA logistics modules—C03, C07, C16, and C20—with a focus on maintaining adequate material buffers to prevent stockouts and ensure operational readiness. It mandates rigorous part number tracking to guarantee accurate inventory visibility and accountability across the supply chain, while ensuring full compliance with First Destination Transportation regulations to meet military shipment standards. All activities must align with strict logistical protocols to support timely and accurate delivery of critical components. This is a small business set-aside subcontract under NAICS code 488510, issued by the ASC Commodities Division within the Department of Defense, with a submission deadline of August 20, 2026. The solicitation is posted on the DIBBS system and is open only to small business concerns, emphasizing support for small business participation in defense logistics. While the place of performance and detailed point of contact information are not specified, successful bidders must be prepared to execute responsibilities across the Department of Defense’s logistics network without geographic limitation, ensuring all compliance requirements are met consistently and in real time.

Freight Transportation Arrangement

POSTED

about 11 hours ago

DEADLINE

Military-Compliant Labeling & BarcodingThe contract requires the application of permanent, MIL-STD-129-compliant labels and 2D barcodes to shipping containers used by the Department of Defense, ensuring full adherence to military standards for identification and tracking. Special markings must be included for test samples to distinguish them from standard shipments, with all labeling required to be durable and legible under operational conditions. This is a small business set-aside subcontract under NAICS code 323111, exclusively open to small businesses, and is managed by the ASC Commodities Division. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, and performance is expected to support DoD logistics operations without specified geographic limitations, though exact location details are not provided.

Commercial Printing (except Screen and Books)

POSTED

about 11 hours ago

DEADLINE

Military Packaging & Preservation ServicesThe contract requires the provision of military-grade packaging and preservation services for adjustable clevises in full compliance with MIL-STD-2073-1E standards, ensuring that all items are properly cleaned, dried, and protected against corrosion and environmental damage during storage and transit. The packaging must include stretch wrap containerization as the specified method for securing and stabilizing the items within shipping containers, maintaining integrity and preventing movement during handling. All work must adhere to strict defense logistics protocols to guarantee readiness and operational reliability. This is a small business set-aside subcontract under the SBA Total Small Business Set-Aside category, designated under NAICS code 493190, and issued by the Department of Defense’s ASC Commodities Division. Interested parties must submit proposals by the deadline of August 20, 2026, with performance expected to meet exacting military specifications and timelines. The contract emphasizes quality control, regulatory compliance, and the use of approved preservation and packaging techniques to support the Department of Defense’s supply chain requirements.

Other Warehousing and Storage

POSTED

about 11 hours ago

DEADLINE

Adjustable Clevis Manufacturing & SupplyThe contract calls for the manufacture and supply of adjustable clevises identified by NSN 5342-01-166-0578, to be produced in strict compliance with military specifications. This includes precision machining to exact dimensional and performance standards, along with proper packaging and marking requirements to ensure traceability and readiness for military use. The work must be performed by a small business as this is a Total Small Business Set-Aside under FAR 19.5, meaning only eligible small businesses may submit bids. The NAICS code 332710 applies, categorizing the work under Other Metal Forge and Stamp. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, giving interested parties approximately three weeks to prepare and submit proposals. The contracting activity is the ASC Commodities Division under the Department of Defense, and the place of performance and point of contact details are not specified in the provided data. Bidders must ensure complete adherence to military standards, packaging protocols, and marking regulations, and submissions must be made through the official DIBBS portal accessible via the provided link.

POSTED

about 11 hours ago

DEADLINE

CLEVIS, ADJUSTABLE

Solicitation # SPE4A6-26-R-XC15

This contract, issued under solicitation SPE4A6-26-R-XC15 by the ASC Commodities Division of the Department of Defense, is a Total Small Business Set-Aside for the procurement of adjustable clevises with NSN 5342-01-166-0578, classified under NAICS code 332710. The contract operates as an indefinite-delivery, indefinite-quantity (IDIQ) mechanism with a five-year performance period and a total ceiling value of $350,000, requiring delivery within 80 days of order receipt. Performance is to be conducted at various CONUS stock locations under FOB Origin terms, with all items subject to strict compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling, barcoding, and marking, including special notations for product verification test samples. The contract mandates use of Wide Area WorkFlow (WAWF) for all invoicing and receiving reports and includes detailed requirements for supply chain traceability, material buffer availability, and Vendor Shipment Module submissions. The contract incorporates a comprehensive set of FAR and DFARS clauses governing quality assurance, inspections, subcontracting, and compliance, with inspections occurring at both origin and destination under MIL-STD-1916, ASQ H1331, and MIL-STD-105 standards, demanding zero non-conformances unless otherwise specified. Subcontracting obligations require flowdown of key clauses, including those addressing commercial product sourcing and counterfeit electronic part avoidance, with specific requirements for subcontracts exceeding the simplified acquisition threshold. The contractor must comply with cybersecurity mandates such as NIST SP 800-171 under 252.204-7012, prohibited use of covered defense telecommunications equipment and foreign satellite services, and hazard communication labeling under OSHA guidelines. The contract prohibits unauthorized use of foreign-flag vessels and requires immediate notification if sea transportation is unexpectedly needed. Representations concerning small business status, labor practices, veteran and disability inclusion, trafficking in persons, and foreign sourcing (including Xinjiang and Russian-linked entities) are required and subject to SAM verification, with affirmative responses triggering additional reporting obligations. The award will be made through a best-value trade-off analysis heavily weighted toward past performance, particularly SPRS assessments, with cost considered as neither the sole nor primary factor. All submissions must be made electronically via DIBBS or email to

POSTED

about 11 hours ago

DEADLINE

Cybersecurity Compliance – NIST SP 800-171 and CMMC Level 2The contract requires the implementation and documentation of all NIST SP 800-171 security controls to safeguard Controlled Unclassified Information (CUI) within contractor systems, ensuring alignment with federal cybersecurity standards. The work includes conducting a comprehensive self-assessment to achieve CMMC Level 2 certification, which involves verifying the proper application of access controls, identification and authentication, audit and accountability, system and communications protection, and other required safeguards. Documentation must be thorough and verifiable to support the self-assessment and demonstrate compliance across all 110 controls outlined in the NIST framework. This subcontract is a total small business set-aside under SBA guidelines, restricted to qualifying small businesses, and falls under NAICS code 541511 for computer systems design services. The performance location is Hill AFB, Utah, with a zip code of 84056-5734. The solicitation was posted on July 30, 2026, and responses are due by August 7, 2026. The contracting activity is under the Department of Defense’s ASC Commodities Division, and the work must be executed in accordance with all applicable federal acquisition regulations. Subcontractors must be prepared to provide full transparency of their cybersecurity posture, including policies, procedures, and evidence of control implementation, to meet CMMC Level 2 requirements without external audit.

Custom Computer Programming Services

POSTED

DEADLINE

Small Business Subcontracting and Socioeconomic Compliance SupportThe contract supports the prime contractor in managing small business representations, socioeconomic status certifications, and joint venture reporting in full compliance with Small Business Administration and Department of Defense regulations. It requires accurate and timely documentation to ensure adherence to the Total Small Business Set-Aside criteria under FAR 19.5, with all activities centered around the North American Industry Classification System code 541611, which pertains to management consulting services. The subcontractor must maintain rigorous records and reporting protocols to verify small business status and fulfill joint venture obligations as mandated by federal procurement standards. Performance is required at Hill Air Force Base with a zip code of 84056-5734, and the opportunity is issued by the ASC Commodities Division under the Department of Defense. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, indicating a limited window for submission. This contract is classified as a subcontract and is designed to assist the prime contractor in meeting federal small business utilization goals, requiring specialized knowledge of SBA and DoD compliance frameworks to avoid disqualification or penalties during contract execution.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Electronic Invoicing and Payment Processing via WAWFThis contract requires the submission of accurate payment requests through the Department of Defense’s Wide Area Workflow system in full compliance with DFARS 252.232-7006 and DoDAAC routing procedures, ensuring seamless electronic invoicing and payment processing for government obligations. The task is part of a subcontract under a Total Small Business Set-Aside, specifically designated for small businesses as defined by the SBA, and is governed by NAICS code 541512, indicating it relates to computer systems design services. The performance location is Hill AFB with ZIP code 84056-5734, and the contracting office is the ASC Commodities Division under the Department of Defense. All submissions must adhere strictly to WAWF protocols and regulatory standards to ensure timely and valid payment. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, and details are accessible through the DIBBS system.

Computer Systems Design Services

POSTED

DEADLINE

Commercial Item Supply – Alarm-Monitor (NSN 6340010085312)The contract calls for the supply of seven units of the ALARM-MONITOR, a commercial off-the-shelf defense item identified by NSN 6340010085312, to be delivered to DLA Depot Hill in Hill AFB, Utah with a ZIP code of 84056-5734. The scope includes all necessary packaging, labeling, and delivery requirements to ensure the items meet military standards and readiness specifications. This is a subcontract under a Total Small Business Set-Aside as defined by FAR 19.5, meaning only small businesses are eligible to bid, and the North American Industry Classification System code 334511 applies, indicating the procurement relates to electromagnetic and wireless communication equipment manufacturing. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, and is managed by the ASC Commodities Division of the Department of Defense through the DIBBS procurement portal.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Hazardous Materials Labeling and ComplianceThe contract requires the provision of hazard warning labels and Material Safety Data Sheets that meet Occupational Safety and Health Administration Hazard Communication standards and Defense Federal Acquisition Regulation Supplement requirements for all hazardous material shipments. All deliverables must be fully compliant with federal regulations governing the labeling and documentation of dangerous goods to ensure safe handling, storage, and transport. Performance is designated at Hill Air Force Base with a zip code of 84056-5734, and the procurement is structured as a small business set-aside under the SBA’s Total Small Business Set-Aside program, limiting eligibility exclusively to small businesses as defined by the North American Industry Classification System code 541690. Responses are due by August 7, 2026, following a posting date of July 30, 2026, with the contracting activity administered by the Department of Defense’s ASC Commodities Division.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Cybersecurity Compliance for Defense Contractors (NIST SP 800-171)

Computer Systems Design Services

POSTED

DEADLINE