Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Fastener Supply (MIL-SPEC)

Active

Federal

Response Deadline08/03/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the supply of military-grade fasteners that must fully comply with MIL-S-1222 and MIL-DTL-1222 specifications, covering all aspects of production, stringent quality assurance protocols, and timely delivery to meet defense requirements. The successful bidder must ensure that every component is manufactured to exact military standards, with rigorous testing and documentation to verify material integrity, dimensional accuracy, and performance under extreme operational conditions. This is a total small business set-aside under the SBA program, exclusively available to certified small businesses as defined by FAR 19.5, with the NAICS code 332722 for screwed and threaded fastener manufacturing. The opportunity is issued by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense and carries a response deadline of August 3, 2026, at 6:00 PM EDT. Performance is expected to support critical defense logistics, with all deliveries routed to designated military installations, though specific location details are not provided. The contract emphasizes compliance, reliability, and small business participation in sustaining the nation’s military supply chain.

General Info

Small business set-aside for MIL-S-1222/MIL-DTL-1222 compliant military fasteners, due August 3, 2026.

Agency

Department Of Defense → Navsup Flt Logistics Ctr Puget SoundView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

WA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 06:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Puget Sound

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Navsup Flt Logistics Ctr Puget Sound

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of military-grade fasteners conforming to MIL-S-1222 and MIL-DTL-1222 specifications, including production, quality assurance, and delivery.

Similar Contracts

Same NAICS industry code

SCREW, MACHINEThe contract involves the procurement of a single machine screw identified by NSN 5305-01-723-0482 under solicitation SPE4A6-26-Q-1211, with a response deadline of July 31, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless an amendment specifies a later revision. The item is subject to export control under either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any disclosure to foreign persons, including foreign nationals within the United States, and DFARS 252.225-7048 applies. Access to the controlled technical data is restricted to DLA contractors with approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and approval from the DLA controlling authority. Cybersecurity requirements mandate a CMMC Level 2 self-assessment and certification by a C3PAO. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. Items must be physically marked according to specifications, and covered defense information is subject to additional handling protocols. The solicitation is managed by the Department of Defense’s ASC Commodities Division, with Vincent Price as the point of contact.

ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

SCREW, MACHINEThis contract solicits machine screws defined by NSN 5305-00-078-0184, with a total quantity of 64 pack units, each containing 50 screws, as of the effective date of February 1, 2023. The item must conform to the current revision of the applicable military or consensus non-government standards, and hardware manufactured to prior revisions that were current at the time of production remains acceptable, but all new production from the solicitation date forward must adhere strictly to the latest standard. Packaging must comply with DLA packaging requirements, and physical identification or bare item marking is required per RQ017. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with verification levels of VII, IV, and II assigned to critical, major, and minor attributes respectively, or corresponding AQLs of 0.1, 1.0, and 4.0. Unspecified attributes are treated as major, and acceptance must be zero non-conformances unless otherwise stated. Thread inspection for Class 3A and 3B threads must comply with System 22 of FED-STD-H28/20, excluding self-locking nuts and threads below specified diameters. The procurement is fully competitive under a military or federal specification, and the solicitation is issued by the ASC Commodities Division under contract number SPE4A6-26-Q-1209 with a response deadline of July 31, 2026. Point of contact is Vincent Price, reachable via email and phone provided.

ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

WASHER, FLATThe contract specifies the procurement of 29 flat washers identified by NSN 5310-00-022-3384 and part number G440050-20, manufactured in accordance with drawing number 24930 G440050 revision AA dated March 28, 1995. The item is classified as a critical application item and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, or a comparable zero-based plan; unspecified attributes are treated as major with verification levels and AQLs assigned accordingly. Mercury or mercury compounds are strictly prohibited in the hardware, packaging, preservation, and marking unless explicitly exempted for functional applications such as batteries or instrumentation, and any such exempted items must meet Navy specifications including double containment and shock-proof design. Packaging must adhere to MIL-STD-2073-1E with preservation method 10, unit container BD, intermediate container E5, and marking compliant with MIL-STD-129 using special marking code 00-00; palletization follows DLA packaging requirements. The contract is firm fixed price with no variance in quantity and delivery is due by November 26, 2026, with FOB origin and inspection and acceptance occurring at destination. The shipping and delivery address is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and transportation details are governed by DLAD procedural notes C19 and C20. The solicitation number is SPE4A6-26-Q-1210, issued by the Department of Defense’s ASC Commodities Division, with Vincent Price as the primary point of contact.

ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Precision Hardware Manufacturing – Hexagon Cap ScrewsThe contract pertains to the manufacture of two high-precision hexagon cap screws adhering to military specifications, with strict requirements for material traceability and counterfeit part prevention to ensure the highest levels of quality and integrity. The work involves producing components that must meet exacting dimensional, mechanical, and material standards as defined by defense protocols, ensuring reliability under critical operational conditions. The subcontractor is expected to implement controlled sourcing, documented lot tracking, and verified supply chain processes to safeguard against substandard or fraudulent materials. This effort is being executed under a subcontract awarded by the Defense Logistics Agency within the Department of Defense, with the North American Industry Classification System code 332722 indicating the focus on screw, bolt, and nut manufacturing. The contract was posted on July 24, 2026, and the place of performance is not specified, though delivery will support DoD operational needs. The work is tied to the award identifier SPE4A626PX524, and compliance with federal defense procurement standards is mandatory throughout fabrication, inspection, and certification phases.

Defense Logistics Agency

POSTED

DEADLINE

Precision Fastener Manufacturing – Hexagon Cap ScrewsThe contract calls for the manufacture of eight units of hexagon cap screws designated as NSN 5305-01-698-5982, with specifications of M12x70-10.9-ZN5/AN, requiring full compliance with ISO 4017 Revision 6 and applicable military standards. These fasteners must meet exacting quality and performance criteria to ensure reliability in defense applications, with the material finish and mechanical properties defined by the 10.9 grade strength and zinc coating. The work is being procured as a subcontract under the Department of Defense’s ASC Commodities Division, with the NAICS code 332722 indicating classification within screw, bolt, and fastener manufacturing. The solicitation was posted on July 24, 2026, with a response deadline of July 31, 2026, and all production and delivery must align with the military’s strict supply chain protocols. The place of performance and point of contact details are not provided, but the contract can be accessed through the DIBBS portal for further procedural guidance.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Fastener Manufacturing & SupplyThe contract calls for the manufacture and supply of a hex cap screw identified by NSN 5305-01-698-5982, requiring strict adherence to military specifications covering material composition, thread profile, head dimensions, and surface finish. The product must meet exacting standards for performance and durability in defense-related applications, ensuring compatibility and reliability in critical military systems. The subcontract is issued by the ASC Commodities Division under the Department of Defense, with a posted date of July 24, 2026, and a response deadline of July 31, 2026. The North American Industry Classification System code 332722 indicates the work falls within the manufacturing of screw, nut, and bolt products, and the place of performance is not specified, allowing flexibility for qualified suppliers to propose their facilities while maintaining compliance with all technical and quality requirements.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

SCREW PAN HDThe contract pertains to the procurement of two screws with a pan head configuration, identified by NSN 5305-01-204-6565, under solicitation SPE4A6-26-T-40Z4. Delivery is required within 20 days after award, and responses must be submitted by July 29, 2026. The item is procured by the ASC Commodities Division of the Department of Defense, with performance taking place at Crane, Indiana. Technical and quality requirements referenced in this contract are drawn from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or an amendment if issued. Packaging must comply with DLA standards, and all items must be physically marked per RQ017, with government identification removed from non-accepted supplies under RQ011. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise defined, and attributes are assigned verification levels or AQLs based on criticality. Mercury and mercury compounds are strictly prohibited in or contacting hardware unless used in exempted applications such as specific batteries, fluorescent lamps, sensors, weapon systems, or NAVSEA-approved reagents, with portable devices containing mercury requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The manufacturer is Datron Inc., Tech Systems Division, located in Thomaston, Connecticut.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

SCREW, CAP, SOCKET HEThe contract seeks the procurement of 200 units of a socket cap screw, part number 567-1004-34, with National Stock Number 5305-00-220-2619, to be delivered FOB origin to Hill Air Force Base, Utah, by November 25, 2025, which is 103 days after award. The supplier must be approved and currently designated as CAGE 25583, L3 Harris Aviation Products Inc., and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, specifically identified by R and I numbers including RC001 for source approval documentation, RQ017 for bare item marking, RP001 for packaging, RQ011 for removal of government identification from non-accepted supplies, and RT001 for measuring and test equipment. Packaging and preservation must conform to MIL-STD-2073-1E and RP001, using preservation method 33 (CLNG/DRY), while marking and barcoding must adhere to MIL-STD-129 with Code 128 or Data Matrix symbols, and hazardous materials must be labeled per 29 CFR 1910.1200. The product must meet quality assurance standards through an inspection system compliant with SAE AS9003 or ISO 9001 tailored to AS9003. The contract prohibits the use of hexavalent chromium and any toxic or hazardous materials unless explicitly authorized, and mandates compliance with export control laws and cybersecurity requirements under DFARS 252.204-7012. Ocean shipments require U.S.-flag vessels unless a waiver is granted 45 days in advance. All deliveries require electronic invoicing via WAWF, and the award will be issued electronically through the DLA Internet Bid Board System. The solicitation incorporates multiple FAR and DFARS clauses applicable to contract type, small business representation, equal opportunity, trafficking prevention, employment verification, sustainable products, and hazardous material management, with deviations authorized for several clauses. Inspection and acceptance occur at origin, and the contractor is responsible for maintaining documentation and compliance with all federal and defense standards throughout production and delivery.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

STUD, SHOULDEREDThe contract solicitation SPE7LX-26-U-8767 seeks 472 shouldered studs identified by NSN 5307-01-178-7445 under a total small business set-aside, with the NAICS code 332722 and a maximum contract value of $350,000. Delivery is required within 118 days after award under FOB Origin terms, with inspection and acceptance occurring at the destination. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, and the deliverable must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, labeling, and bar-coding, including specific packaging codes, preservation methods, and hazardous material handling. All packaging and labeling must adhere to DLA-specific criteria under RP001, and the item must meet stringent acceptance standards including zero non-conformances for critical defects under MIL-STD-1916 and MIL-STD-105. The contract mandates compliance with multiple DFARS and FAR clauses related to safeguarding covered defense information, cyber incident reporting, toxic and hazardous materials, trafficking in persons, employment eligibility, sustainable products, and prohibitions on certain defense equipment and hexavalent chromium. Offerors must hold a valid UEI and CAGE code, and must certify their small business status under applicable socioeconomic categories including HUBZone, 8(a), WOSB, or SDVOSB, with joint ventures requiring disclosure of each member’s UEI. Invoicing must be submitted through WAWF, and all hazardous materials require proper labeling under 29 CFR 1910.1200 and submission of Safety Data Sheets prior to award, with ongoing reporting obligations if material composition changes. The solicitation is closed for responses on July 29, 2026, and is managed by the Strategic Acquisition Program Directorate, with Theodore Misiolek listed as the primary point of contact. No unit price is specified in the CLIN, making award contingent on competitor pricing within the contract ceiling.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

SCREW, SHOULDERThe contract is for the procurement of 39 shoulder screws, identified by NSN 5305-01-732-8603, under solicitation SPE4A6-26-T-07GC issued by the ASC Commodities Division of the Department of Defense. Delivery is required at the DLA Distribution San Joaquin facility in Tracy, California, with a delivery timeline of 239 days from the award date and an FOB origin point, meaning the contractor bears responsibility for shipping logistics and associated costs until the goods are handed over to the carrier. The item must comply with the technical specifications outlined in Basic Drawing NR 53711 5857226 and adhere to stringent quality standards from the DLA Master List of Technical and Quality Requirements, including RQ001 for tailored higher-level quality requirements, RQ011 for removal of government identification from non-accepted supplies, RQ017 for bare item marking, and RD002 for covered defense information. Packaging and labeling must conform to MIL-STD-2073-1E and MIL-STD-129, respectively, with specific preservation method 31 requiring cleaning and drying without the use of preservation materials, and mandatory barcoding on shipping containers. Inspection and acceptance occur at the destination under FAR 52.246-2, with acceptance criteria requiring zero non-conformances in critical attributes under a zero-based sampling plan aligned with MIL-STD-1916 and ASQ H1331. The contract mandates full compliance with ITAR and EAR export controls, restricting technical data access to contractors who hold US/Canada Joint Certification Program certification, have completed DLA export control training, and have been approved by DLA authorities. Contractors must implement cybersecurity safeguards per 252.204-7012 and report cyber incidents, adhere to hazardous material labeling requirements under OSHA and 252.223-7001, and comply with employment eligibility, anti-trafficking, and whistleblower protection clauses. Offerors must hold a valid Unique Entity ID and CAGE code and represent their small business status and socioeconomic certifications accurately, with affirmative responses triggering additional disclosures. Invoicing must be submitted electronically via WAWF, and pricing details, while listed as $0.000 for the sole CLIN, remain incomplete or unverified, leaving the total contract value undefined.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

BOLT, INTERNAL WRENCThe contract pertains to the procurement of three units of an internal wrenching bolt, identified by NSN 5306-01-507-1758, under solicitation SPE4A6-26-T-07DU, issued by the ASC Commodities Division of the Department of Defense. Delivery is required to the DLA Distribution facility in New Cumberland, Pennsylvania, with a delivery window of 101 days after award and a need ship date of November 3, 2026. All items must be shipped FOB origin with zero variance in quantity, inspected and accepted at the destination, and packaged in strict compliance with MIL-STD-2073-1E, using packaging code U, preservation method 33, and dry climate control. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging requirements. A prohibition on mercury or mercury compounds applies to all preservation, packaging, packing, and marking materials, except for functional uses in batteries, fluorescent lights, specified instruments, weapon systems, or NAVSEA-approved chemical reagents, with portable mercury-containing devices requiring shock-proof design and a second containment boundary per NAVSEA 5100-003D. Sampling and inspection must follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances required unless otherwise stated. The contract incorporates multiple FAR and DFARS clauses covering small business representation, trafficking in persons, employment eligibility, sustainable products, hazardous material identification, safeguarding controlled information, subcontracting, and electronic invoicing via WAWF. Contractors must maintain active SAM registration, comply with NIST SP 800-171 and cybersecurity requirements, and provide Safety Data Sheets for any hazardous materials. The solicitation requires electronic submission through DIBBS by July 29, 2026, and the contract includes provisions for accelerated payments to small business subcontractors, prohibitions on hexavalent chromium and unauthorized obligations, and restrictions on procurement from certain Chinese military companies. No unit price is specified in Section B, and no contract value is officially stated, though historical transactions for the item exist. The contract is presumed to be firm-fixed-price, typical for simplified acquisitions, and includes a comprehensive

ASC COMMODITIES DIVISION

POSTED

DEADLINE

BOLT, EYEThe contract concerns the procurement of 30 units of BOLT,EYE with NSN 5306016867022 under solicitation SPE4A6-26-T-06WV, with a required delivery within 20 calendar days of order receipt to FPO AE 09517-3310, FOB destination. Delivery must occur no later than July 9, 2026, with no variance allowed in quantity. The item is subject to stringent labeling and packaging mandates, requiring compliance with MIL-STD-129 for all marking and labeling, ASTM D3951 for packaging unless superseded by the DLA Master List of Technical and Quality Requirements, and RP001 for palletization. Physical bare item marking per RQ017 is mandatory, but Item Unique Identification (UID) is exempt per service customer request. Sampling protocols follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required for acceptance unless otherwise specified, and unspecified attributes are treated as major with an AQL of 1.0. All shipments must be processed through Wide Area WorkFlow (WAWF) for payment and receiving reports, with electronic invoicing being the only authorized method. The contract includes multiple DFARS and FAR clauses addressing cybersecurity, including NIST SP 800-171 compliance for safeguarding covered defense information, cyber incident reporting requirements, and prohibitions on covered telecommunications equipment. Hazard communication standards apply, requiring submission of Safety Data Sheets and proper labeling of hazardous materials per 29 CFR 1910.1200. The contractor must also adhere to clauses on combating trafficking in persons, employment eligibility verification, sustainable products, whistleblower rights, and restrictions on mandatory arbitration. Quality assurance for manufacturers and non-manufacturers is governed by tailored higher-level requirements under RQ001, and non-accepted items must have all government identification removed. The contract imposes no pricing details in the solicitation, and all financial terms remain to be established upon award. The contracting officer is Monica Clark, and proposals must be submitted electronically via DIBBS by July 29, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Flt Logistics Ctr Puget Sound

Same awarding agency

UID Data Submission and WAWF ReportingThis contract requires the electronic submission of Unique Identification (UID) data to the Department of Defense’s Item Unique Identification Registry or the Web Application for Weapon System Acquisition and Financials (WAWF), in strict compliance with Defense Federal Acquisition Regulation Supplement (DFARS) mandates. The work encompasses the precise formatting of UID data, thorough validation to ensure regulatory compliance, and timely resolution of any errors or rejections encountered during submission. The contractor must possess the technical capability to handle data according to established DoD standards, with a focus on accuracy, auditability, and system interoperability. The contract is structured as a small business set-aside under the SBA Total Small Business Set-Aside program, designated under NAICS code 541512 for Computer Systems Design Services. It is issued by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense and is open for bids until August 3, 2026. Performance of the work is expected to support defense logistics and tracking systems, with the contractor responsible for meeting all technical and procedural requirements without reliance on external file-based documentation. The solicitation does not specify a physical place of performance, indicating that the work may be performed remotely as long as compliance with DFARS and system integration standards is maintained.

Computer Systems Design Services

POSTED

DEADLINE

Military Packaging and LabelingThis contract requires the packaging and labeling of fasteners in strict adherence to MIL-STD-129 and ASTM-D-391, ensuring all materials and methods meet federal military standards for durability, identification, and traceability. The work must be performed using only approved packaging components and label formats compliant with these specifications, and the finished products must be shipped FOB Origin, meaning the vendor assumes responsibility for packaging and readiness before delivery to the carrier. The contract is structured as a subcontract under a Total Small Business Set-Aside designation, reserved exclusively for small businesses certified by the Small Business Administration, and is categorized under NAICS code 493190, which pertains to other warehousing and storage activities. The solicitation was posted by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, an agency under the Department of Defense, and responses are due by August 3, 2026, with no specified place of performance or point of contact details provided in the data.

Other Warehousing and Storage

POSTED

DEADLINE

Unique Item Identification (UID) Marking ServicesThe contract requires the application of permanent, machine-readable 2D Data Matrix Unique Item Identification (UID) marks on fasteners in strict compliance with MIL-STD-130 standards. This includes the full process of symbology creation, precise marking application, and verification to ensure each mark meets DoD requirements for legibility, durability, and scannability. The work must be performed to support traceability and inventory management across military supply chains, with all markings needing to withstand environmental and operational conditions without degradation. This is a small business set-aside subcontract under NAICS code 339999, issued by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense. The opportunity was posted on July 24, 2026, with a response deadline of August 3, 2026, at 6:00 PM. All bidders must be certified as a total small business to qualify, and the performance location is not specified, though the work is likely tied to defense logistics operations managed by the agency. Interested parties must submit proposals through the SAM.gov portal before the deadline to be considered.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Replacement Parts and Components for HPACThe contract pertains to the supply of OEM or government-approved replacement parts and components for Curtiss-Wright 1320NL20 compressors, encompassing critical elements such as seals, valves, motors, and controls. All provided items must comply with MIL-STD-130 and DFARS UID standards to ensure proper identification, traceability, and security compliance within government supply chains. The work is classified as a subcontract under NAICS code 333994 and is being procured by the Naval Supply Systems Command Fleet Logistics Center Puget Sound on behalf of the Department of Defense. Performance will be carried out in Sasebo, with responses due by July 31, 2026, at 5:00 PM, following a posting date of July 24, 2026.

Industrial Process Furnace and Oven Manufacturing

POSTED

DEADLINE

Technical Documentation and Test Procedure ExecutionThe contract requires the execution and documentation of naval test procedures for verifying the performance of compressor systems before and after overhaul, ensuring operational readiness through comprehensive data logging and certification. These activities are critical for maintaining the reliability and functionality of naval equipment, with all procedures aligned to technical guidelines and regulatory standards. The work involves meticulous documentation of test results and adherence to established protocols to validate system performance under operational conditions. Performance of the contracted tasks is centered in Sasebo, with the work supporting the Department of Defense through the Naval Supply Systems Command Fleet Logistics Center Puget Sound. The solicitation is classified as a subcontract under NAICS code 541330, indicating it falls within the engineering services category. All responses must be submitted by July 31, 2026, and the opportunity was posted on July 24, 2026. The contract does not specify a set-aside type or point of contact, and no additional details regarding award limitations or eligibility criteria are provided.

Engineering Services

POSTED

DEADLINE

High-Pressure Air Compressor Overhaul – Main Machinery Room 2The contract calls for a full overhaul and replacement of the No. 2 High-Pressure Air Compressor, model Curtiss-Wright 13/20NL20, located in Main Machinery Room 2. This work encompasses complete removal of the existing unit, installation of the new or overhauled compressor, followed by thorough testing and commissioning to ensure operational readiness. All tasks must be executed in accordance with stringent technical and safety standards to maintain the integrity of the vessel’s air systems. The project is tied to naval maintenance protocols and requires specialized expertise in marine compressed air systems. This subcontract, issued by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense, is designated for performance in Sasebo. It falls under NAICS code 333994, covering other commercial and service industry machinery manufacturing, indicating the technical nature of the work. The solicitation was posted on July 24, 2026, with responses due by 5:00 PM on July 31, 2026. While details about the contractor selection process or set-aside status are not specified, the urgency of the timeline reflects the critical nature of the compressor’s role in shipboard operations.

Industrial Process Furnace and Oven Manufacturing

POSTED

DEADLINE

High-Pressure Air Compressor Overhaul – Main Machinery Room 1The contract entails the complete repair, overhaul, and replacement of the No. 1 High-Pressure Air Compressor, model Curtiss-Wright 13/20NL20, located in Main Machinery Room 1. This work includes all phases of the process: disassembly, thorough inspection, identification and replacement of worn or damaged components, reassembly, rigorous testing, and final commissioning to ensure full operational readiness. The scope demands specialized technical expertise to handle high-pressure systems and adhere to stringent performance and safety standards expected in naval environments. The solicitation is issued as a subcontract by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense, with a North American Industry Classification System code of 333994, indicating the focus on other industrial machinery manufacturing. The place of performance is in Sasebo, requiring contractors to operate on-site and coordinate with existing infrastructure and personnel. The response deadline is July 31, 2026, and the posting date is July 24, 2026, providing a seven-day window for submissions. All work must be executed in compliance with military-grade specifications, ensuring reliability and longevity of the repaired system under demanding operational conditions.

Industrial Process Furnace and Oven Manufacturing

POSTED

DEADLINE

Supply of OEM Gaskets for Fresh Water Generator (Alfa Laval AquaBlue E1 C125-HW-FS)The contract requires the supply and delivery of genuine original equipment manufacturer gaskets specifically designed for the Alfa Laval AquaBlue E1 C125-HW-FS fresh water generator installed aboard USNS JOHN LEWIS (T-AO 205). All parts must be sourced directly from Alfa Laval Inc or its authorized distributors, ensuring full traceability and compliance with stringent military standards to guarantee performance and reliability in operational conditions. The contract emphasizes authenticity and quality control, prohibiting the use of counterfeit or non-OEM components. This is a total small business set-aside under the SBA program, classified under NAICS code 332999, indicating it is reserved exclusively for small business concerns. The solicitation was posted on July 24, 2026, with responses due by July 28, 2026, and the place of performance is designated as San Diego. The contracting activity is managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense, requiring vendors to meet all technical, administrative, and compliance obligations within the tight window to support the ship’s critical water generation systems.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

HIGH PRESSURE AIR COMPRESSORThe U.S. Navy through the Naval Supply Systems Command Fleet Logistics Center Puget Sound is seeking a high pressure air compressor under solicitation number N0040626QS173, posted on July 24, 2026, with responses due by 5:00 PM ET on July 31, 2026. This is a combined synopsis and solicitation classified under NAICS code 336611 for Aircraft and Aircraft Parts Manufacturing, and no set-aside provisions apply, meaning it is open to all eligible businesses. The equipment is intended for performance at Sasebo, with procurement managed by the Department of Defense office located in Bremerton, Washington, 98314-5100. Primary point of contact is Taura Helms, reachable via taura.s.helms3@navy.mil, with Denise Manor as secondary contact. All details, including technical specifications and submission requirements, are contained within the attached combined synopsis, justification and approval documents, and related attachments referenced in the solicitation.

Ship Building and Repairing

POSTED

DEADLINE

Lube Oil & Fuel Oil Controller UpgradeThis contract is a sole-source, firm-fixed-price supply purchase issued by the Naval Supply Systems Command Fleet Logistics Center Puget Sound for the upgrade of Lube Oil and Fuel Oil Controllers on the USNS CHARLES DREW (T-AKE 10), procured from GEA MECHANICAL EQUIPMENT. The requirement is for six Conversion Sets (with HMI D10 and IO4 upgrade), to be delivered by October 1, 2026, FOB Destination at the Military Sealift Command BATS facility in San Diego, California, with possible alternate delivery to Port Hueneme, CA. The contract incorporates extensive compliance requirements under MIL-STD-2073-1, MIL-STD-129R, and MIL-STD-130 for packaging, marking, and Unique Item Identification (UII), including mandatory ISPM-15 certification for all wood packaging and compliance with ISO/IEC standards for machine-readable data. All items must be registered in the DoD IUID Registry, and shipments must be tracked via traceable freight carriers with unique identifiers. Payment is governed by the Wide Area WorkFlow (WAWF) system under DFARS 252.232-7006, with accounting tracked through DoDAACs N50082, N00406, and N62387. The evaluation is based on a best-value trade-off among Technical, Past Performance, and Price factors, with no lowest price technically acceptable (LPTA) threshold. Offerors must comply with a comprehensive suite of federal and defense clauses covering cybersecurity, subcontracting restrictions, contractor ethics, system for award management (SAM) maintenance, and prohibitions on inverted domestic corporations and covered telecommunications equipment. Required representations include Small Business status disclosures, compliance with NIST SP 800-171, and certification regarding covered defense information safeguarding under DFARS 252.204-7012 and 252.204-7018. The contracting officer is Bailey Butler, with invoicing coordinated through MSC_N8223_AP_Prevalidation@us.navy.mil and technical oversight by Jerrid Morelen at the delivery site. All submissions must adhere to Standard Form 1449 and be delivered electronically to the contracting official by July 31, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

BRAND NAME OEM ALFA LAVAL INC GASKETSThe U.S. Navy’s Fleet Logistics Center Puget Sound is issuing a brand name solicitation for OEM Alfa Laval Inc gaskets critical to the operation of a vessel’s fresh water generator, designated as a ship-critical safety item under COMSCINST 4490.1C, which mandates procurement exclusively from the original equipment manufacturer or authorized sources. This requirement is non-negotiable due to safety and qualification restrictions, and the contractor must be officially qualified by the Military Sealift Command as verified through their public registry. The solicitation is a total small business set-aside under NAICS code 334513, open to all responsible sources, with submissions required to include a signed SF30 Page 1 and must respond by the deadline of July 28, 2026. The anticipated award date is August 2026, and performance will occur in San Diego, California, while the contracting office is located in Bremerton, Washington. All inquiries and submissions must be directed to Contract Specialist Vicktoria Wright at the provided Navy email address.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

INSULATION PIPEThe Fleet Logistics Center Puget Sound is seeking insulation pipe with specific part numbers 6RHFN068658, 6RHFN068858, 6RFHN068558, and 6RHFN068418 under a sole source arrangement with K-Flex LLC, though the government is open to evaluating interest from other vendors to determine if competition is feasible. The procurement is structured as a Total Small Business Set-Aside, and offers will be assessed for technical capability including delivery timing, price reasonableness, and past performance without prioritizing any single factor. The evaluation will follow RFO 12.203 guidelines to select the most advantageous offer. The anticipated award is scheduled for August 2026, with quotes due by August 7, 2026. The solicitation is issued under NAICS code 335999 and is managed by the Department of Defense through Naval Supply Systems Command. The primary point of contact for the procurement is Taura Helms, reachable at taura.s.helms3@navy.mil, with secondary support from Denise Manor. Performance will occur in Yokosuka, and all responses must be submitted via the SAM.gov portal referenced in the solicitation details.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE