Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Forged Disk Assembly Manufacturing

Active

Federal

Response Deadline08/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture of 58 precision disk assemblies through forging and critical welding processes, strictly following technical drawing 12479550. Each assembly must undergo rigorous dimensional verification and technical inspection to ensure compliance with specified tolerances and performance standards. The finished products must be packaged in accordance with MIL-STD requirements to guarantee protection during transit and storage. This is a subcontract under a Women-Owned Small Business Set-Aside, categorized under NAICS code 332111, and is being managed by the Department of Defense through LAND SUPPLY CHAIN. The place of performance is designated as New Cumberland, PA, with a zip code of 17070-5002. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026.

General Info

Manufacture 58 precision disk assemblies per drawing 12479550, meet MIL-STD packaging, DoD subcontract, New Cumberland, PA.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332111 - Iron and Steel ForgingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

WOSB

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of 58 precision disk assemblies via forging and critical welding per technical drawing 12479550, including dimensional verification, technical inspection, and MIL-STD-compliant packaging.

Similar Contracts

Same NAICS industry code

Precision Steel Bar Manufacturing – Grade 410 Stainless Steel, Cold-Finished Hexagonal BarsThe contract calls for the manufacture of 10,000 feet of cold-finished hexagonal bars made from Grade 410 stainless steel, with each bar measuring 1.000 inch across flats and ranging in length between 10 and 12 feet. The material must comply with stringent military and aerospace standards, ensuring high dimensional precision, consistent mechanical properties, and surface finish suitable for critical applications. Production must adhere to approved specifications for material composition, heat treatment, and finishing processes to meet the demanding performance requirements of defense and aviation systems. Deliverables are to be performed at a place of performance located in Phoenix, Arizona, with the Defense Logistics Agency as the overseeing organization under the Department of Defense. The solicitation is structured as a subcontract and falls under NAICS code 332111, indicating a focus on forged and stamped metal product manufacturing. Responses are due by August 20, 2026, following a posting date of August 9, 2026, giving potential contractors approximately eleven days to submit qualified proposals. All work must align with the technical and compliance expectations set by federal procurement standards, and failure to meet material specifications could result in rejection of delivery or contract termination.

Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

Metal Casting Manufacturing for Aerospace Landing Gear RetainerThe contract requires precision metal casting of a single aerospace component, the landing gear retainer, identified by NSN 1630-01-044-6825 and part number 209-050-114-7, to meet stringent defense specifications. The scope encompasses all phases of production including tooling development, casting, quality control, packaging, and labeling, ensuring full compliance with applicable military and aerospace standards. The work must be performed to exacting tolerances and verified through approved inspection protocols to guarantee operational reliability in high-stress environments. The solicitation is classified as a subcontract under NAICS code 332111, issued by the ASC SUPPLIER OPER OEM DIVISION within the Department of Defense. Responses are due by August 17, 2026, with the opportunity posted on August 9, 2026. While no set-aside designation is specified, the contract is tied to a specific military part and must be fulfilled in accordance with defense procurement regulations. All deliverables must be properly documented and traceable, with final product packaging and labeling adhering to required labeling schemes for military logistics systems. The place of performance and point of contact details are not provided, but performance is expected to align with Defense Logistics Agency procurement protocols accessible via the referenced DIBBS link.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

Metal Casting Manufacturing of Rail Assembly

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

Precision Metal Casting and Machining of Valve BodyThe contract calls for the manufacture of a precision-cast 3-inch valve body using ASTM A494 nickel-copper alloy, requiring strict adherence to dimensional tolerances and final machining to meet flanged end connection specifications. The work involves both casting and precision machining processes to ensure the component meets exacting performance criteria for mechanical integrity and sealing surfaces, suitable for demanding applications in industrial or defense environments. The material selection emphasizes corrosion resistance and structural reliability under operational stress. This is a total small business set-aside under SBA guidelines, restricted exclusively to small businesses as defined by the NAICS code 332111 for metal casting establishments. The opportunity was posted on August 9, 2026, with a bid submission deadline of August 20, 2026. Performance is to take place in Bremerton, Washington, under the auspices of the Department of Defense, specifically through the Puget Sound office. The solicitation is structured as a subcontract and is accessible via the DIBBS platform under reference number SPE7MC26T187Z, with no public point of contact designated in the available data.

POSTED

about 7 hours ago

DEADLINE

Precision Forging or Casting of Rod End ComponentThe contract calls for the manufacture of a clevis rod end using either precision forging or casting methods, strictly adhering to military specifications. This includes careful selection of approved materials, proper heat treatment processes to ensure mechanical integrity, and comprehensive initial quality inspections to verify compliance with performance and safety standards. The component must meet rigorous defense-grade requirements for durability, dimensional accuracy, and reliability under extreme operational conditions. The work is to be performed at a designated location in Mechanicsburg with a ZIP code of 17050-2411, under a subcontract issued by the Department of Defense through its Land Supplier Operations Vehicle Support division. The solicitation was posted on August 9, 2026, with a firm response deadline of August 20, 2026, and is classified under NAICS code 332111, indicating it pertains to forging and stamping operations. Interested parties must submit proposals by the deadline to be considered for award, and all manufacturing activities must align with the technical and compliance expectations set forth by the military.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

Precision Metal Casting and Machining of Copper-Nickel FittingsThe contract involves the manufacture of 63 precision copper-nickel pipe elbows composed of a 70-30 copper-nickel alloy, each featuring a 45-degree flow angle and a 2-inch nominal pipe size with socket-weld ends. The work encompasses the full manufacturing process including casting, precision machining to meet military specifications, and final finishing to ensure dimensional accuracy and surface integrity. All components must conform to stringent quality standards required for high-performance fluid handling systems in defense applications, with production centered around the specified place of performance in New Cumberland, Pennsylvania, under a 17070-5002 zip code. The offering is structured as a subcontract under NAICS code 332111, reflecting its classification within the forged and stamped metal product manufacturing sector, and is issued by the Fluid Handling Division of the Department of Defense. Proposals must be submitted by the deadline of August 20, 2026, with the solicitation posted on August 9, 2026, providing a 11-day window for qualified manufacturers to respond. The requirement is part of a broader defense supply initiative intended to secure critical components for mission-critical fluid systems, necessitating adherence to exacting engineering criteria and traceable manufacturing processes. While no set-aside type is specified, interested parties must be prepared to demonstrate capability in producing military-grade metal components, with the contract award expected to support ongoing operations within the Department of Defense's infrastructure. Access to full solicitation details is available through the official DIBBS portal using the provided link.

FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

GUIDE, CAM FOLLOWER, FO

Solicitation # SPE7L1-26-T-946Y

The contract pertains to the procurement of a Guide, Cam Follower, Folding Floor, identified by NSN 5340-01-540-4920 and part number 7017777897, with a quantity of 64 units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, incorporating specific R and I numbered provisions including packaging standards, removal of government identification from non-accepted supplies, and qualified products or manufacturers lists. The item must comply with stringent quality assurance protocols, including mandatory Certificates of Quality Compliance and Metal Certification, which are to be submitted as part of the Contract Data Requirements Lists. Sampling and inspection are to follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels or AQLs based on criticality. Technical documentation, including drawings and quality assurance provisions, is referenced under Revision D of the Technical Data Package dated through 2025. Delivery is FOB origin with inspection and acceptance occurring at destination, and packaging must conform to MIL-STD-2073-1E and MIL-STD-129 with no special marking. The product must be palletized according to DLA packaging directives and shipped to the designated facility in Tracy, California. The delivery deadline is 116 days from contract award, with an original required delivery date of April 7, 2027, and a need ship date of February 5, 2026. The unit price is $64.00, resulting in a total contract value of $4,096, and the solicitation was issued under SPE7L1-26-T-946Y with responses due by August 20, 2026.

LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2062

The contract specifies the procurement of 109 feet of hot rolled, annealed 440C stainless steel bar with a diameter of 0.750 inches and a length requirement of exactly 10, 11, or 12 feet in whole increments, with a reference weight of 1.500 pounds per foot. All material must meet the technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements and comply with applicable specifications including SAE AMS-QQ-S-763D, MIL-STD-129R, ASTM A700-14, and SAE AMS2806. Each unit must be permanently and legibly marked with the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer’s name, heat and lot number, and dimensions using stamping or stenciling methods that do not contaminate or impair performance, and markings must be waterproof and durable. Adhesive labels are required for bars under 0.250 inches in nominal outer diameter, while tags are acceptable for wire. A Certificate of Quality Compliance, commonly known as a mill-certification, is mandatory for every shipment and must accompany the product and be forwarded to the DLA Troop Support Contracting Officer. Supply is restricted to manufacturers and distributors listed on the Qualified Suppliers List for Distributors (QSLD), and any bid based on non-QSLD-sourced material constitutes an exception and must be explicitly declared. Failure to comply with QSLD eligibility may result in criminal penalties in addition to civil remedies. Packaging must conform to MIL-STD-2073-1E and DLA Packaging Requirements, with special packaging codes Z and ZZ aligned to ASTM A700. Marking and packaging must adhere strictly to MIL-STD-129, including the use of vinyl or plastic-coated pressure-sensitive labels on structural shapes and secured lifts. Delivery is FOB origin, with inspection and acceptance occurring at destination within 164 days, and a 10% variance in quantity is permitted. The shipment is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the solicitation is governed under the federal procurement code SPE8E4-26-T-2062 with a NAICS code of 332111.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2055

The contract specifies the procurement of 62 linear feet of hot-rolled, annealed square steel bar composed of SAE 4130 alloy, measuring 0.750 inches across the flats and weighing 1.913 pounds per foot, with all bars required to be exactly 12 feet in length in whole-foot increments. Strict material certification is mandated, requiring a Certificate of Quality Compliance with each shipment, to be provided both to the receiving depot and forwarded to the DLA Troop Support Contracting Officer. The steel must meet the technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and compliance with MIL-STD-2073-1E packaging and MIL-STD-129 marking is required, including unique identification markings on each unit that include the contract delivery order number, NSN, specification revision, alloy grade, manufacturer details, heat and lot numbers, and dimensions. Marking must be legible, waterproof, and non-contaminating, permitted via stenciling or approved adhesive labels for small-diameter items, with no die stamping allowed. Packaging must conform to DLA requirements including special codes Z and ZZ per ASTM A700, and palletization must adhere to RP001 guidelines. The supplier must be on the Qualified Suppliers List for Distributors (QSLD), and any non-compliant offer must be explicitly flagged as an exception; products from unapproved distributors will be rejected and may incur criminal penalties. Delivery is FOB origin with a 164-day delivery window, final delivery to Tracy, CA, with an acceptance point at destination and ±10% quantity variance permitted. The NSN is 9510-00-808-9593 and pricing is $62.00 per foot for a total of $3,844.

DLA DIST SAN JOAQUIN

POSTED

about 7 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2045

The contract specifies the procurement of wrought steel bars composed of Steel Comp 630, with a diameter of 0.375 inches and lengths ranging between 10 and 20 feet in whole-foot increments, weighing approximately 0.380 pounds per foot. These bars must be centerless ground and fully compliant with SAE AMS5643W Revision NR W dated December 1, 2021, and other referenced standards including MIL-STD-129R, ASTM A700-14, and SAE AMS2806. A Certificate of Quality Compliance, also known as a mill-material certification, is mandatory for every shipment and must be provided to both the customer and the DLA Troop Support Contracting Officer. All units must be clearly and permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer details including heat and lot numbers, and dimensions. Markings must be legible, waterproof, and applied using approved methods such as stamping or stenciling, with adhesive labels required for bars under 0.250 inches in nominal diameter. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with special codes Z and ZZ per ASTM A700, and palletization must follow RP001 guidelines. The material is classified as a critical application item, requiring strict adherence to quality and traceability protocols. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and any deviation from this requirement must be explicitly declared and will be treated as an exception. If the supplier is an approved QSLD member, government inspections are waived and oversight relies on the Certificate of Quality Compliance and other documented conformance. The contract allows for a 10% variance in quantity, with delivery scheduled for 164 days after award, FOB origin, and inspection and acceptance to occur at destination. The total quantity ordered is 1,193 feet, with a unit price based on the line item referenced as PR 7017758636, and the delivery destination is the DLA Distribution Depot in Tinker AFB, Oklahoma. The contract, issued under solicitation SPE8E4-26-T-2045, incorporates extensive technical, quality, and packaging controls governed by DLA’s Master List of Technical and Quality Requirements and mandates

POSTED

about 7 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2056

The contract specifies the procurement of steel bar metal, specifically hot rolled, square, spheredized steel with a width of 1.00 inch across flats and lengths ranging from 6 to 14 feet in whole-foot increments only. The material must meet a reference weight of 3.40 pounds per foot and comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, incorporating specifications such as ASTM A686-16 and SAE AMS2806. The product must be supplied with a Certificate of Quality Compliance for every shipment, and continuous identification markings are mandatory on each unit, including the DLA contract delivery order number, NSN, specification revision, grade, class, type, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Marking methods are restricted to stamping (excluding die stamp) or stenciling with waterproof, non-contaminating fluid; adhesive labels are required for small-diameter bars, tubes, and shapes under 0.250 inches nominal OD. Packaging must adhere to MIL-STD-2073-1E and RP001, with marking conforming to MIL-STD-129, including special codes Z and ZZ as defined in ASTM A700. Full compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory; only suppliers listed on the QSLD are eligible for award, and deviations require explicit disclosure. The contract includes a 10% quantity variance, delivery FOB origin, and destination inspection and acceptance point, with a required delivery date of 164 days from award. Special packaging and preservation standards apply, and the product must be shipped to the DLA Distribution San Joaquin facility in Tracy, California. All documentation, including CDRL-METALSCERT and DD Form 1423s, must be provided as required, and failure to meet any specification constitutes grounds for rejection.

DLA DIST SAN JOAQUIN

POSTED

about 7 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2050

The contract specifies the procurement of cold-finished steel bars composed of either 1018 or 1020 alloy, with a thickness of 0.375 inches, a width of 12.00 inches, and a length between 10 and 12 feet in whole-foot increments only, weighing approximately 15.30 pounds per foot. All material must meet technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including compliance with ASTM A108, ASTM A29/A29M-20, ASTM A700-14, SAE AMS2806, and MIL-STD-129R for marking and packaging. Each bar must be clearly marked with the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer’s name, heat and lot number, and dimensions using stamping or stenciling methods that are durable, waterproof, and non-contaminating. Adhesive labels are required in lieu of line markings, and all packaging must conform to MIL-STD-2073-1E, with preservation methods as defined by ASTM A700 and markings aligned with MIL-STD-129, including the special marking code ZZ. The material must be shipped in whole-foot lengths, and each shipment must include a Certificate of Quality Compliance, which must be forwarded to the DLA Troop Support Contracting Officer. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award under this solicitation; any non-compliance constitutes an unauthorized substitution with potential criminal penalties. Although source inspection is waived for qualified suppliers, quality assurance requirements such as CDRL-METALSCERT are mandatory, and material certifications must accompany every shipment. The delivery requirement stipulates 67 linear feet to be delivered FOB origin within 164 days of contract award, with a 10% quantity variance allowed. The destination for delivery is the DLA Distribution facility in New Cumberland, Pennsylvania, with preservation, packaging, and marking instructions strictly tied to federal standards. The solicitation number is SPE8E4-26-T-2050, with a response deadline of August 20, 2026, and a required ship date of February 1, 2027. All documentation must align with the referenced Technical Data Package revisions and applicable DLA procurement notes, particularly

DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

Supply Chain and Subcontract Management for Defense ContractsThis contract governs logistics and subcontract management activities critical to defense supply chain operations, requiring strict adherence to federal cybersecurity and procurement compliance standards. Participants must track and verify CAGE codes and UEIs for all subcontractors to ensure accurate identification and eligibility, while fully complying with DFARS 252.204-7016 to exclude prohibited telecom equipment from the supply chain. All invoicing must be submitted through the Wide Area WorkFlow system to maintain accurate financial records and ensure timely payment processing. The work is performance-based at Tracy, California, with a target date of August 20, 2026, for bid submissions, under a NAICS code indicating freight transportation services. As a subcontract under the Department of Defense’s Land Supply Chain organization, this effort demands rigorous documentation, real-time compliance monitoring, and coordination across the extended vendor network to uphold national security standards.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 7 hours ago

DEADLINE

Hazardous Material Compliance and LabelingThe contract titled Hazardous Material Compliance and Labeling requires the provision of specialized services to ensure full adherence to federal and military regulations governing the labeling of hazardous materials. Specifically, the contractor must comply with DFARS 252.223-7001, OSHA 1910.1200, and MIL-STD-129, which mandate accurate hazard communication, standardized labeling formats, and uniform packaging identification for defense-related shipments. The work is performance-based and must be executed to support the Department of Defense’s logistics infrastructure, with all activities centered at the designated place of performance in Tracy, California, zip code 95304-5000. The subcontract is classified under NAICS code 541620, indicating it involves management consulting services related to compliance and operational safety standards. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and is managed by the Land Supply Chain organization within the Department of Defense. While no set-aside designation or point of contact is specified, the contract expects the contractor to deliver precise, auditable labeling systems that meet stringent military and occupational safety requirements. The services are critical to maintaining regulatory compliance across the supply chain, preventing mislabeling risks, and ensuring the safe handling, transportation, and storage of hazardous substances within defense operations.履约必须符合所有适用法规的字面要求和实质意图，确保标签内容完整、清晰、持久且在各种环境条件下保持可读性。

Environmental Consulting Services

POSTED

about 7 hours ago

DEADLINE

Military-Compliant Packaging and Marking ServicesThe contract requires full compliance with MIL-STD-2073-1E for the packaging and marking of defense components intended for shipment, as well as adherence to MIL-STD-129 for their storage, ensuring all items are prepared to military standards for durability, traceability, and environmental protection. Hazardous materials must be properly identified and labeled in accordance with applicable regulations, integrating safety and regulatory requirements into every phase of packaging and marking operations. Work must be performed at the designated place of performance in Tracy, California, 95304-5000, with all deliverables subject to rigorous quality control to meet Department of Defense expectations. This is a subcontract opportunity under the NAICS code 493190, issued by the Land Supply Chain within the Department of Defense, with a response deadline of August 20, 2026. The solicitation is open to qualified subcontractors capable of executing military-grade packaging and labeling processes, requiring precise documentation, material handling, and compliance with federal defense standards. All work must align with the technical specifications outlined in the referenced military standards and must be executed without deviation to ensure compatibility with military logistics systems and supply chain integrity.

Other Warehousing and Storage

POSTED

about 7 hours ago

DEADLINE

Precision Machined Component ManufacturingThe contract encompasses the precision manufacturing of a military-grade guide, cam follower, and folding floor component, with all production strictly required to adhere to approved engineering drawings and meet exact form-fit-function specifications. The component must comply with all technical requirements outlined in the DLA Master List, ensuring full interoperability and reliability under demanding operational conditions. Production is to be performed at the designated place of performance in Tracy, California, with the zip code 95304-5000, and must fulfill rigorous defense standards for quality and consistency. This subcontract, posted on August 9, 2026, with a response deadline of August 20, 2026, falls under the NAICS code 332721 for Metal Forge and Stampings, and is issued by the Department of Defense through the Land Supply Chain organization. The work is critical to supply chain readiness and must be completed without deviation from specified technical parameters. While no set-aside designation is indicated, the nature of the component and the involvement of defense logistics require full compliance with applicable federal acquisition regulations, security protocols, and quality assurance procedures relevant to military-grade hardware manufacturing.

Precision Turned Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

Precision-Machined Mounting Plate SupplyThe contract requires the manufacture and supply of 292 precision-machined mounting plates designated by NSN 5340015781311, to be produced in strict compliance with Technical Data Package Revision A Generation 1 and all applicable military standards. Each unit must meet exacting dimensional, material, and finish specifications to ensure compatibility and performance in defense applications. The work is to be performed at a designated location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, and the delivery schedule aligns with the response deadline of August 20, 2026, following the solicitation's posting on August 9, 2026. Though the contract is classified as a subcontract, it is sponsored by the Department of Defense under the LAND SUPPLY CHAIN agency and falls under NAICS code 332722, which pertains to metal stamping and forging operations. All deliverables must adhere to military-grade quality assurance protocols, and the contractor is expected to provide full documentation and certification to verify conformance throughout the production lifecycle.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

Cybersecurity Compliance for Covered Defense Information (CDI)This contract requires the implementation of NIST Special Publication 800-171 controls and full compliance with DFARS clause 252.204-7012 to protect covered defense information handled during performance. The subcontractor must establish and maintain a secure environment that meets federal requirements for safeguarding sensitive defense data, including implementing appropriate access controls, audit logging, incident reporting, and system integrity measures. Compliance is mandatory for all systems and processes handling covered defense information, with failure to meet requirements potentially resulting in contract termination or penalties. The contract falls under NAICS code 541512 for computer systems design services and is associated with the Department of Defense’s Land Supply Chain organization. Performance is to take place at Fort Bliss, TX 79918-0000, and the agreement is structured as a subcontract. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026. The contractor is expected to demonstrate operational readiness and ongoing adherence to cybersecurity standards throughout the contract period, ensuring that all technical, administrative, and physical safeguards prescribed by NIST and DFARS are fully integrated and auditable.

Computer Systems Design Services

POSTED

about 7 hours ago

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract requires the preparation and submission of hazard warning labels and Safety Data Sheets for the radiator assembly if it contains or is shipped with hazardous materials, ensuring full regulatory compliance with transportation and workplace safety standards. This work is critical for the safe handling, storage, and use of the component throughout its lifecycle and must adhere to national and international chemical safety guidelines. The effort is being procured as a subcontract under the NAICS code 541690, classified under environmental and other technical consulting services, and is managed by the Department of Defense through the Land Supply Chain office with performance required at Fort Bliss, Texas, ZIP 79918-0000. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, indicating a narrow window for submission and evaluation. The contracting entity is focused on ensuring timely and accurate documentation to support logistical operations and regulatory compliance across defense supply chains. While specific requirements such as format, numbering conventions, or regulatory frameworks like GHS are not detailed here, adherence to applicable federal and international standards for hazard communication is implied and expected. This subcontract is not set aside for any specific small business category, and all qualified providers must meet the technical and documentation standards necessary to support DoD logistics and safety protocols.

Other Scientific and Technical Consulting Services

POSTED

about 7 hours ago

DEADLINE

Manufacture and Supply of Radiator Assembly (Military-Grade)The contract calls for the full manufacturing, testing, and delivery of a single military-spec radiator assembly identified by NSN 2930-01-566-8452 and Part Number 87719313. The product must meet all Department of Defense technical specifications and comply with DLA requirements for packaging, labeling, and environmental standards to ensure suitability for military operational environments. The radiator assembly is intended for use at Fort Bliss, Texas, with performance and delivery obligations tied to that location. This is a subcontract opportunity under NAICS code 336310, which classifies it within the automotive parts manufacturing sector, specifically for military-grade applications. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, providing a limited window for qualified vendors to submit proposals. The contracting activity is managed by the Land Supply Chain under the Department of Defense, and all work must adhere to strict military logistics and quality control protocols. The official solicitation link is available through the DIBBS system for further details and submission procedures.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 7 hours ago

DEADLINE

Hazard Communication and Labeling ComplianceThe contract requires the preparation and submission of OSHA-compliant Safety Data Sheets and hazard labels for packing materials prior to award, ensuring full adherence to hazardous communication standards. This obligation must be fulfilled by the prospective subcontractor as a prerequisite to contract activation, with all documentation meeting federal regulatory requirements for chemical hazard identification and workplace safety communication. The work is scoped under NAICS code 541690, falling under the Department of Defense’s Land Supply Chain organization, and the place of performance is designated as FPO, 09573, indicating a military postal location with no specific city or state assigned. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is structured as a subcontract opportunity under a Department of Defense procurement. Although no set-aside type is specified, interested parties must submit the required SDS and labeling documentation in alignment with OSHA’s Hazard Communication Standard to qualify for consideration. The contract’s success hinges on timely and accurate compliance documentation, with no further details provided regarding performance metrics, payment schedules, or delivery timelines beyond the requirement to complete the safety documentation before any formal award is made.

Other Scientific and Technical Consulting Services

POSTED

about 7 hours ago

DEADLINE

Logistics and Delivery CoordinationThe contract pertains to end-to-end logistics and delivery coordination under the Department of Defense’s Land Supply Chain, requiring full compliance with Defense Logistics Agency standards. Responsibilities include managing all documentation, submitting required filings through the Wide Area WorkFlow system, and ensuring timely delivery of goods to the designated performance location at FPO with ZIP code 09573. This subcontract is governed under NAICS code 484121, which classifies it within the truck transportation industry, and must be responded to by August 20, 2026, with the solicitation posted on August 9, 2026. All activities must adhere strictly to DLA protocols to support military supply chain operations.

General Freight Trucking, Long-Distance, Truckload

POSTED

about 7 hours ago

DEADLINE

Supply of Preformed Packing MaterialThe contract entails the procurement and delivery of preformed packing material identified by NSN 5330015874345, a commercial off-the-shelf rubber sealing product that must comply with military specifications. The material is intended for use in defense applications and must meet exacting performance and quality standards required by the Department of Defense. The solicitation is issued as a subcontract under the NAICS code 326299, which classifies it within other plastic product manufacturing, indicating the supplier must have the capability to produce highly specialized rubber components consistent with military-grade requirements. The opportunity was posted on August 9, 2026, with responses due by August 20, 2026, and the place of performance is designated as FPO with ZIP code 09573, suggesting delivery to a military post office location, likely supporting overseas or mobile operations. The contracting agency is LAND SUPPLY CHAIN within the Department of Defense, and the contract is accessible through the DIBBS system via the provided UI link. There is no set-aside designation specified, meaning all eligible suppliers may compete without restrictions based on business size or category. The supplier must ensure timely delivery and full compliance with the technical specifications of the packing material to fulfill the contract obligations.

All Other Rubber Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Helical Compression Spring (NSN 5360015355579)The contract calls for the manufacture or supply of ten helical compression springs conforming to military specifications outlined by NSN 5360015355579. This is strictly a material-only procurement with no associated installation, maintenance, or service obligations. The requirement falls under NAICS code 332999, indicating it is for other miscellaneous fabricated metal product manufacturing. The solicitation is issued as a subcontract under the Department of Defense through the LAND SUPPLY CHAIN organization, with performance required at Fort Campbell, Tennessee, 42223-5000. The opportunity was posted on August 9, 2026, and responses must be submitted no later than August 20, 2026. All delivery and compliance must meet the exact technical standards of the specified NSN, ensuring interoperability and reliability within defense systems.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE