Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Forging and Machining of Defense Components

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the precision forging, heat treatment, and machining of defense components identified by NSN 1670-01-088-4654, all in strict compliance with military specifications. The work requires rigorous quality control procedures including the preparation of first article submissions and lot sample inspections to verify conformance before full production. The subcontract is issued under the North American Industry Classification System code 332111, indicating classification within the forged steel and forging industry. It is managed by the Defense Logistics Agency on behalf of the Department of Defense, with performance expected to meet the high standards required for military applications. The contract was posted on July 21, 2026, and will be executed through a subcontract mechanism without a specified set-aside designation or geographic performance location.

General Info

Precision forging and machining of defense components per military specs, controlled by DLA, NSN 1670-01-088-4654.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332111 - Iron and Steel ForgingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-26-R-X071.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PRODUCTION LOT TESTING (GOVERNMENT)

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 21

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of NSN: 1670-01-088-4654 units requiring precision forging, heat treatment, and machining to military specs, including first article and lot sample preparation.

Similar Contracts

Same NAICS industry code

Aerospace Casting and Forging Services

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

in about 1 month

Supply of Solenoid Assembly (NSN 5945016520958)

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-28TK

Solicitation SPE4A6-26-T-28TK is a fixed-price request for quotation issued by the DLA Aviation ASC Commodities Division for the procurement of 666 spring pins, identified by NSN 5315009239442. The items are designated as critical and require source inspection at the point of origin. Delivery is specified as FOB Origin with a required delivery date of February 17, 2027, and a need ship date of March 8, 2027. The items must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Technical compliance is governed by TDP Rev A Gen 1, with specific adherence to NASM39086 and NASM10971. Quality assurance requires compliance with SAE AS9003 or ISO 9001, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with a strict prohibition on the use of mercury or mercury compounds in preservation and packaging. The solicitation incorporates several federal regulations, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for cybersecurity safeguarding. A price evaluation preference is available for SBA-certified HUBZone Small Business Concerns. Offers produced using additive manufacturing are ineligible for award. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

ANGLE, STRUCTURAL

Solicitation # SPE7M2-26-T-6811

Solicitation SPE7M2-26-T-6811, issued by the DLA Land and Maritime Nuclear Reactor Program, seeks quotes for 100 feet of structural angle material under NAICS 332111. The required material is steel rolled grade AH36U, conforming to MIL-S-22698 and ASTM-A6 Table A2.7 for equal leg L-shapes. The structural angle must have an overall height and width of 2.000 inches, a nominal flange thickness of 0.250 inches, and a length between 10 and 12 feet. This is designated as a critical application item and requires fine grain practice material. Delivery is required within 105 days, with the place of performance and delivery located at DLA Distribution San Joaquin in Tracy, California. The contract mandates strict quality and marking requirements, including a Certificate of Quality Compliance (COQC) for each manufacturing lot and marking every 3 feet with the contract number, NSN, CAGE code, and material specifications. Packaging and preservation must adhere to ASTM A700 and MIL-STD-2073-1E, while marking must follow MIL-STD-129. Inspection and acceptance are set at the destination. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and the iRAPT system for electronic COQC submission. The solicitation is open to full and open competition, with a price evaluation preference available for certified HUBZone small business concerns. Compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information is required.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE8E4-26-T-2237

Solicitation SPE8E4-26-T-2237 is a fixed-price request for the procurement of 49 units of Steel Comp 302 metal bars. The required material must be cold-finished with a hexagon profile, measuring 0.562 inches across flats and 12 feet in length. All bars must be supplied in whole feet lengths only. The contract requires delivery to the DLA Distribution New Cumberland facility in Pennsylvania, with a need ship date of March 1, 2027, and a required delivery date of March 4, 2027. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). A Certificate of Quality Compliance (Mill-Material Certification) is mandatory for every shipment. Strict marking and packaging requirements apply, including compliance with MIL-STD-129 and ASTM A700, with specific continuous identification markings required on each unit of issue to avoid product rejection. The procurement also incorporates the Buy American Act, the Berry Amendment, and HUBZone price evaluation preferences. Inspection and acceptance will occur at the destination.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

PIN, SHOULDER, HEADED

Solicitation # SPE7L4-26-T-6782

This contract, identified as solicitation SPE7L4-26-T-6782, is for the procurement of six headed shoulder pins with NSN 5315-01-434-1335 and part number 12366319-1. The requirement is issued by the Department of Defense through the LSO Combat Vehicles and Armament agency. The items are associated with BAE Systems Land & Armaments L.P. and AMZ Alabama Inc. The contract specifies a delivery timeframe of 168 days after order, with a required delivery date of February 15, 2027, and a need ship date of March 9, 2027. Shipping is set as FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Anniston in Alabama. Compliance with MIL-STD-130N for identification marking and MIL-STD-129 for general marking is required, alongside adherence to DLA packaging requirements under RP001 and ASTM D3951 for commercial packaging.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

PLATE, STANCHION

Solicitation # SPE7M4-26-T-387E

Contract SPE7M4-26-T-387E is a solicitation issued by the Department of Defense DLA Land and Maritime Fluid Handling Division for the procurement of three stanchion plates, identified by NSN 2040-01-359-7917 and part number A2545-2 from Marathon Norco Aerospace, Inc. This critical application item is subject to strict material restrictions, including a prohibition on Class I ozone depleting chemicals and the intentional addition of mercury or mercury containing compounds, except where functionally required by NAVSEA specifications. The contract requires compliance with Cybersecurity Maturity Model Certification CMMC Level 2 self-assessment and the protection of covered defense information. Delivery is specified as FOB Origin with an inspection and acceptance point at destination, specifically DLA Distribution San Joaquin in Tracy, California. The required delivery date is August 17, 2027, with a need ship date of March 9, 2027, and a delivery window of 168 days after receipt of order. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001, with a preference for avoiding plastic wrapping and cushioning materials. The solicitation is managed under NAICS code 332111 and requires submissions via the DIBBS system.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE8E4-26-T-2234

This contract, solicitation number SPE8E4-26-T-2234, is for the procurement of 214 feet of cold drawn, round steel bar, composition 4130, which is hard and tempered. The material must have a diameter of 0.563 inches and be supplied in whole feet lengths of 10, 11, or 12 feet, with a weight of 0.845 lb/ft. The procurement is governed by NAICS code 332111 and requires compliance with SAE AMS-S-6758B Revision B and SAE AMS2806 Revision D. Key requirements include a mandatory Certificate of Quality Compliance (Mill-Material Certification) provided with every shipment. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award. Detailed marking is required via stamping or stenciling, including the contract delivery order number, NSN, specification number, grade, alloy, manufacturer name, heat and lot number, and dimensions. Packaging and marking must adhere to MIL-STD-129, MIL-STD-163, and ASTM A700, with delivery scheduled for DLA Distribution Albany. The delivery timeline is 160 days after order, with a required delivery date of February 19, 2027.

ALBANY TRANSPORTATION OFFICER

POSTED

DEADLINE

Solicitation # SPE8E4-26-T-2235

Solicitation SPE8E4-26-T-2235 is a fixed-price request for the procurement of 55 feet of metal bar, specifically Steel Comp 4340, hot rolled, annealed, with a 3.000 inch diameter and lengths between 10 to 12 feet. The material must be supplied in whole feet lengths only. This requirement is managed by DLA Troop Support and is designated for delivery to the DDSP New Cumberland Facility in Pennsylvania, with an original required delivery date of February 11, 2027, and a need ship date of March 1, 2027. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contract mandates rigorous quality and marking standards, including the provision of a Certificate of Quality Compliance with every shipment and adherence to MIL-STD-129 for marking and ASTM A700 for preservation and packing. Continuous identification markings, including the contract delivery order number, NSN, and manufacturer details, are required on each unit of issue. Inspection and acceptance will occur at the destination. The procurement incorporates various federal regulations, including the Buy American Act and the Berry Amendment. Contractors must use the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports. Technical compliance is governed by SAE AMS6415V and SAE AMS2806, and the contract includes specific requirements for safeguarding covered defense information and combating trafficking in persons.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

CLAMP, SUPPORT (FORGING)

Solicitation # W519TC26Q8816

Solicitation W519TC26Q8816 is a request for quote from the Department of Defense for 30 forging support clamps as specified in drawing 25-73940. This acquisition is open to all vendors and is not set aside for small businesses. To participate, vendors must be active in the Joint Certification Program and provide their CAGE code when requesting the necessary technical drawings. The required delivery date for the items is December 8, 2026, with shipping destined for Rock Island Arsenal, Illinois. All submissions must include shipping costs and provide a Certificate of Conformance and a Certified Test Report. Payment will be processed through the Wide Area Workflow system via the Defense Finance and Accounting Service.

POSTED

DEADLINE

Manufacturing of Sleeve Bushings (NSN 3120-01-445-4645)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

BUSHING, SLEEVE

Solicitation # SPE4A6-26-T-27NY

This contract is a solicitation for the procurement of 33 sleeve bushings, identified by NSN 3120011712342 and part number 12322559. The order is managed by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-27NY. Technical specifications are governed by basic drawing 19207 12322559 and associated quality assurance plans. The delivery is set for 171 days after order, with a need ship date of March 8, 2027, and a final required delivery date of June 29, 2027. Shipping is FOB Origin and destined for DLA Distribution Anniston in Alabama. Key requirements include adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E, with a mandate to wrap each sleeve in neutral paper to prevent damage. Inspection and acceptance will occur at the origin.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Storage Battery Supplier (NSN 6140-01-624-9682)

Battery Manufacturing

POSTED

about 20 hours ago

DEADLINE

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

Supply of Uninterruptible Power Supplies (UPS)

Motor and Generator Manufacturing

POSTED

about 20 hours ago

DEADLINE

MIL-SPEC Packaging and Hazardous Material Shipping

Freight Transportation Arrangement

POSTED

about 20 hours ago

DEADLINE

Supply of Battery Assembly (6140-01-664-6369)

Storage Battery Manufacturing

POSTED

about 20 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

Solicitation SPE7L7-26-Q-2418 is a firm-fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of sealed lead acid storage batteries, identified by NSN 6140-01-624-9682. The requirement consists of two line items totaling eight units, with two units for item 0001 and six units for item 0002. Approved sources include EnerSys Delaware Inc. (part numbers ODS-AGM6M or PC2250) and Stored Energy Products, Inc. (part number PC2250). These items are designated as critical application items and are restricted source items requiring engineering source approval by the government design control activity. The batteries are classified as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with shipping terms set as FOB Destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001, while hazardous materials must be handled according to IP025 and FAR 52.223-3. Quality assurance will be managed through destination inspection and acceptance using sampling methods such as MIL-STD-1916 or ASQ H1331. Award will be based on cost alone for quotes that conform to the solicitation requirements. Quotations must be submitted by September 21, 2026, and payment will be processed electronically via the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

about 20 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2422

This contract is a firm fixed price solicitation from the Defense Logistics Agency for one maintenance-free sealed lead-acid type I storage battery, part number APCRBC133 by Schneider Electric IT Corporation. The item has a non-extendable shelf life of 12 months and must be delivered within 60 days after order. Inspection and acceptance will occur at the origin, with shipping destined for the USS Harvey C Barnum Jr. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contract includes hazardous material communications regarding mercury restrictions and specifies that the battery must meet nonspillable criteria under 49 CFR 173.159 to qualify for specific transportation exceptions across land, sea, and air.

Battery Manufacturing

POSTED

about 20 hours ago

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7L7-26-Q-2420

POSTED

about 20 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE8E6-26-T-4407

Solicitation SPE8E6-26-T-4407 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of four decals, identified by NSN 7690-01-262-9486 and Boeing part number BACM9L10AVM. This is a Foreign Military Sales requirement for Greece, with delivery required within five days after receipt of order. The items are designated as Type I (Code M) with a non-extendable shelf life of 24 months. Inspection and acceptance will occur at the point of origin, and the final delivery destination is Mechanicsburg, Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including required shelf-life labels. Palletization must comply with RP001, and the use of plastics for wrapping or cushioning should be avoided where possible. Technical and quality requirements are governed by the DLA Master List, including provisions for the removal of government identification from non-accepted supplies and the safeguarding of covered defense information. All quotes must be submitted via the DIBBS portal, and the government will not evaluate offers utilizing additive manufacturing unless specifically authorized.

Commercial Printing (except Screen and Books)

POSTED

about 20 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

The Defense Logistics Agency (DLA) Land and Maritime has issued solicitation SPE7L7-26-Q-2417 for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369. The requirement specifies a delivery timeline of 60 days after receipt of order, with the place of performance located at FPO 09592. Award will be based on the best value to the government, evaluating technical acceptability, price, and past performance regarding offered delivery. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. This contract carries stringent security and regulatory requirements. It requires CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to export control under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed DLA export-control training. Additionally, the vendor must adhere to MIL-STD-2073-1E Level B for packaging and MIL-STD-129 for marking. Because the items are hazardous materials, the contractor must provide a HAZDEC form and Material Safety Data Sheets in accordance with FED STD 313D and DFARS 252.223-7001.

Battery Manufacturing

POSTED

about 20 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 20 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS