Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Forging and Stamping of Aerospace Ignition Sleeve

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the precision manufacturing and delivery of an ignition sleeve designated by NSN 2920012877383, engineered to meet stringent aerospace standards using high-grade materials produced through forging or stamping processes. The work includes all necessary machining operations, rigorous inspection protocols to ensure dimensional and material integrity, and packaging that complies fully with NSN requirements for military logistics and handling. The product is part of a critical propulsion or ignition system component where reliability and performance under extreme conditions are non-negotiable. Awarded under the Defense Logistics Agency’s procurement framework, this subcontract falls under NAICS code 332722 for forging and stamping operations and is tied to the Department of Defense’s supply chain for defense hardware. Posting occurred on July 13, 2026, indicating an anticipated timeline for execution, with no set-aside provisions specified. The place of performance and point of contact details are not provided, but the contract reference SPE7L526P0342 confirms its official status within the DIBBS system, ensuring traceability and compliance with federal contract regulations applicable to defense contractors.

General Info

Precision manufacturing of NSN 2920012877383 ignition sleeve for DoD under DLA procurement, compliant with aerospace and military standards.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 13

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of a precision-engineered SLEEVE, IGNITION TER (NSN: 2920012877383) using aerospace-grade materials via forging or stamping, including machining, inspection, and NSN-compliant packaging.

Similar Contracts

SCREW, CAP, HEXAGON HEADThe contract pertains to the procurement of 12 hexagon head cap screws with NSN 5305-01-725-1815 under solicitation SPE4A6-26-T-05PR, with a delivery deadline of 5 days ADO. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents specifically authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment barrier in accordance with NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, non-accepted supplies require removal of government identification, and items must be physically marked as specified. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are classified with defined verification levels or AQLs. The item contains technical data subject to ITAR or EAR export controls, restricting disclosure to foreign persons even within the U.S., and requires compliance with DFARS 252.225-7048. Distribution of this controlled data is limited to DLA contractors who hold JCP certification, have completed mandated training and questionnaires, and have received explicit approval from DLA. The contract is managed by the ASC Commodities Division of the Department of Defense with performance centered in Portsmouth, and inquiries should be directed to Hannah Shimer at hannah.shimer@dla.mil.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

NUT, PLAIN, HEXAGONThe contract pertains to the procurement of 70 plain hexagonal nuts identified by NSN 5310-01-493-3532 under solicitation SPE4A6-26-T-05PB, with a delivery deadline of 151 days after award. Strict prohibitions are in place against the intentional addition or direct contact of mercury or mercury-containing compounds with the hardware, except for functional uses in specified items such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents approved by NAVSEA. Portable devices containing mercury must be shockproof and equipped with a secondary containment barrier in compliance with NAVSEA 5100-003D. Quality conformance requires a Certificate of Conformance unless waived by a Quality Assurance Letter of Instruction, and Certificate of Quality Compliance documentation applies via CDRLs and DD Form 1423s, with all technical and quality requirements referenced in the DLA Master List. Manufacturers and non-manufacturers must comply with ISO 9001:2015 quality management standards. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively, unless otherwise stated in the contract or technical documents. Unspecified attributes are treated as major. MIL-STD-105/ASQ Z1.4 may determine sample size, but acceptance requires zero non-conformances unless waived. Thread inspection for Class 3A and 3B threads must adhere to System 22 of FED-STD-H28/20, excluding self-locking nuts and threads below specified diameters. All items must be marked in accordance with MIL-STD-130N for U.S. military property identification, and shipping must comply with DLA packaging requirements. Cybersecurity compliance requires either a CMMC Level 2 certified third-party assessment or a self-assessment, and the contract incorporates requirements for the protection of covered defense information. The nuts are procured fully competitively under a federal specification, with all technical data accessible only during the open solicitation period via the DIBBS portal.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Precision Machining and Metal FabricationThe contract involves the supply of precision-machined metal components essential for antenna assembly, specifically waveguides, brackets, and RF cavities, all requiring stringent dimensional tolerances and military-grade surface finishes to ensure optimal performance in demanding operational environments. These components are critical to the functionality and reliability of defense-related communication systems, necessitating advanced manufacturing techniques and rigorous quality control protocols to meet exacting technical standards. The contract is classified as a subcontract under the North American Industry Classification System code 332722, indicating it falls within the category of machine shop services, and is associated with the Defense Logistics Agency under the Department of Defense. It was posted on July 13, 2026, and the place of performance and specific office details are not provided, though the contractual obligations are tied to fulfilling military specifications. The work is managed through the DIBBS system under contract number SPE7M526P0485, and the recipient is expected to deliver components that adhere to defense-grade requirements without deviation.

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

STUD, CONTINUOUS THREADThe contract specifies the procurement of a STUD, CONTINUOUS THREAD with NSN 5307-01-248-1440 and part number B4012945, for a quantity of two units at a unit price of $2.00, totaling $4.00. Delivery is required within 20 days FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s packaging requirements, and all markings must adhere to MIL-STD-130N for military property identification. The item must be marked with the designated control number and shipped via the fastest traceable means, excluding parcel post, to Fort Stewart, GA. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which override any conflicting standards. Sampling follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is required. The solicitation number is SPE4A7-26-T-566M, with a response deadline of July 21, 2026, and the required delivery date is July 8, 2026. All documentation and drawings are accessible via DLA’s DIBBS portal.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

NUT, PLAIN, CASTELLATThe contract involves the procurement of 39 castellated hexagon nuts with the NSN 5310-00-167-1279 under solicitation SPE4A6-26-T-05NY, issued by the ASC Commodities Division of the Department of Defense. The items must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless amended. Packaging, identification, and marking of the nuts are governed by specific DLA requirements including RP001, RQ011, and RQ017, ensuring proper handling and traceability. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for limited functional uses such as batteries, fluorescent lamps, sensors, weapons systems, or specified reagents approved by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. The delivery schedule requires fulfillment within 59 days after contract award, with performance taking place in Tracy, California. The solicitation was posted on July 13, 2026, with responses due by July 21, 2026, and is procured as fully competitive under a federal specification. Primary point of contact is Ashley Sacolick via email at ashley.sacolick@dla.mil.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE