Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Gear Manufacturing – Helical Gear Production

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture of three helical gears to exact military specifications, with strict adherence to quality standards established by the Defense Logistics Agency. Each gear must undergo comprehensive material certification, precise dimensional inspection, and full quality assurance protocols to ensure compliance with DLA requirements. The work is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with an emphasis on precision engineering and defect-free production. The subcontract is issued under NAICS code 332320, reflecting its classification within the gearing and power transmission equipment manufacturing sector. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, with the contracting activity managed by the Department of Defense through its LSO Combat Vehicles and Armament division. All deliverables must meet rigid military performance criteria and include full documentation to validate conformance at every stage of production.

General Info

Manufacture three helical gears to military specs, quality assured, delivered to New Cumberland by August 10, 2026.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

332320View NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of three helical gears to military specifications, including material certification, dimensional inspection, and quality assurance per DLA standards.

Similar Contracts

Same NAICS industry code

Embedded Thermal Architecture IntegrationThe contract seeks the design and integration of advanced cooling functionality directly into structural and electronic components for aerospace and defense applications, focusing on innovations such as heat-spreading chassis and self-cooling avionics that eliminate the need for traditional cooling systems. This effort aims to enhance thermal management efficiency by embedding cooling capabilities into the physical architecture of components, reducing weight, complexity, and power demands while improving reliability in high-stress operational environments. The opportunity is structured as a subcontract under NAICS code 332320, with a submission deadline of September 30, 2026, and is sponsored by the Defense Advanced Research Projects Agency under the Department of Defense. The work will support next-generation platforms requiring compact, high-performance thermal solutions, with performance expectations centered on seamless integration, durability under extreme conditions, and compatibility with existing aerospace and defense systems. Proposers must demonstrate technical proficiency in materials science, thermal engineering, and systems integration to meet mission-critical requirements.

Defense Advanced Research Projects Agcy

POSTED

DEADLINE

in about 2 months

Aircraft Ground Servicing Adapter Shield – Manufacturing & SupplyThe contract seeks the manufacture and supply of 17 specialized aircraft ground servicing adapter shields identified by NSN 1730-01-328-0542, all of which must comply with strict military specifications to ensure durability, precise fit, and full functional capability under operational conditions. The work is classified as a subcontract under NAICS code 332320, indicating the involvement of a specialized manufacturing firm in the defense supply chain. Performance is required at New Cumberland, Pennsylvania, with the delivery deadline tied to the response due date of August 7, 2026, following a solicitation posted on July 30, 2026. The contracting entity is the ASC Commodities Division within the Department of Defense, and the requirement is managed through the DIBBS platform, indicating a formal defense procurement process aimed at supporting critical ground support infrastructure for military aviation operations.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aircraft Window Panel Manufacturing & SupplyThe contract concerns the manufacture and supply of fifteen certified aircraft window panels, identified by Part Number 70206-21202-122 and National Stock Number 1560012735920, to be produced exclusively from approved sources including Nordam Group LLC, Control Logistics Inc, or Sikorsky Aircraft Corporation. These panels are critical aviation components requiring strict adherence to certification standards and must be sourced only from vendors prequalified to meet military and aerospace specifications. The work is to be performed at the specified place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, ensuring compliance with logistical and operational requirements tied to defense supply chains. The solicitation, issued under the NAICS code 332320 for Aerospace Product and Parts Manufacturing, is structured as a subcontract and was posted on July 29, 2026, with a firm deadline for responses on August 6, 2026. The contracting organization is the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense, indicating the requirement originates from a defense logistics or maintenance command. Bidders must be prepared to meet exacting quality, traceability, and delivery benchmarks consistent with military aircraft component standards. The contract opportunity is accessible through the DIBBS platform, but specific point of contact details are not provided within the available data.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

TIG or Precision Welding of Slide SubcomponentsThe contract calls for precision TIG or laser welding of internal slide subcomponents with stringent requirements for weld integrity, minimal thermal distortion, and complete traceability throughout the manufacturing process. Work must meet high-quality standards suitable for defense applications, ensuring structural reliability and dimensional accuracy under demanding operational conditions. The NAICS code 332320 indicates this is a metal fabrication and machining subcontract, specifically targeting specialized welding services for critical aerospace or defense components. The solicitation was posted on July 29, 2026, with a response deadline of August 7, 2026, and is managed under the Land Supply Chain division of the Department of Defense. The place of performance and point of contact details are not specified, but the work is expected to support DoD supply chain needs. Interested parties must submit proposals through the DIBBS platform using the provided RFQ link, adhering to all technical and procedural requirements inherent to defense subcontracting.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacture of Qualified Electrical Connector BackshellsThe contract calls for the precision manufacturing of 594 electrical connector backshells adhering strictly to SAE AS85049 Revision F and D specifications, with all units required to be QPL-certified under Federal Supply Class 5935. The production must achieve zero-defect quality standards, ensuring absolute reliability and compliance with military-grade performance requirements. All items must be manufactured to meet the rigorous technical and inspection criteria mandated for aerospace and defense applications. The contract is structured as a subcontract under NAICS code 332320, issued by the Active Devices Division of the Department of Defense, with performance required at a facility in New Cumberland, Pennsylvania, ZIP code 17070-5002. Responses to this solicitation are due by August 12, 2026, following its posting on July 28, 2026. Bidders must be prepared to demonstrate full compliance with certification, quality control, and documentation protocols to meet the stringent demands of defense-grade electronics manufacturing.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Electrical Panel Assembly ManufacturingThe contract entails the fabrication and assembly of a military-spec electrical console panel, requiring full integration of components, precise wiring, and secure housing to meet stringent defense standards. All work must adhere to preservation and marking protocols dictated by military specifications, ensuring durability, traceability, and operational readiness in field conditions. The place of performance is designated as Andalusia, Alabama, with a zip code of 36421-4304, indicating the physical location where manufacturing and assembly activities must occur. This is a subcontract opportunity under NAICS code 332320, which classifies it within the Electrical Equipment and Wiring Supplies Manufacturing sector, and is issued by the Department of Defense through LSO COMBAT VEHICLES AND ARMAMENT. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, leaving a narrow window for potential subcontractors to prepare and submit proposals. All submissions must align with the technical and procedural rigor expected by the defense supply chain, with no set-aside provisions specified, making it open to qualified general subcontractors.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Manufacture of Battery Retainers (NSN 6160011018402)The contract requires the fabrication and assembly of 60 battery retainers to meet specific military specifications, with strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for labeling and marking, and AS9100 for quality management systems. All work must ensure full compliance with these standards throughout production, inspection, and delivery, encompassing rigorous quality control processes to guarantee defect-free performance. The retainers are designated under NSN 6160011018402 and must be packaged, marked, and documented in accordance with Department of Defense logistics protocols. This subcontract is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses and falls under NAICS code 332320 for forgings and stampings. The performance location is in Tracy, California, with a zip code of 95304-5000, and all work must be completed by the response deadline of August 7, 2026. The solicitation originated from DLA Dist San Joaquin under the Department of Defense, and contractors must align with the requirements specified in the public record at the provided DIBBS link.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Miscellaneous & Ornamental MetalworkThe contract pertains to the fabrication and installation of handrails, guardrails, stair systems, and decorative metal elements under the classification of Miscellaneous & Ornamental Metalwork. It is issued as a subcontract with a NAICS code of 332320 and is tied to the Public Facilities Department of Massachusetts, with performance required at a location in Boston with a ZIP code of 02108. The solicitation was posted on July 27, 2026, and responses must be submitted by August 12, 2026, at 5:00 PM. All work must meet the specified material, dimensional, and safety standards for public facility infrastructure, with an emphasis on precision craftsmanship and adherence to architectural designs. The project involves metal components that serve both functional and aesthetic purposes, requiring skilled labor in welding, fabrication, and on-site installation. No set-aside classification is indicated, and the contract is open to qualified subcontractors capable of delivering high-quality ornamental and safety-critical metalwork in a timely manner.

PFD01 - Public Facilities Department

POSTED

DEADLINE

Control Panel Fabrication and AssemblyThe contract requires the design, fabrication, and testing of NEMA-rated SCADA control panels intended for outdoor deployment at a landfill site, incorporating programmable logic controllers, human-machine interfaces, and compatible power supply units to ensure reliable operation in harsh environmental conditions. All panels must meet specified industrial standards for durability, weather resistance, and electrical safety, with full testing protocols to validate performance prior to delivery. The work falls under NAICS code 332320 and is structured as a subcontract opportunity issued by the City of Denton, Texas, with responses due by August 26, 2026. The project demands precision in assembly, adherence to environmental ratings, and comprehensive documentation to support long-term maintenance and operational integrity in an uncontrolled outdoor setting.

POSTED

DEADLINE

Supply of Electrical Connector Backshells and Cable Clamp AdaptersThe contract requires the manufacture, testing, and delivery of defense-grade electrical connector backshells and cable clamp adapters that fully comply with military specifications, ensuring performance and reliability under demanding operational conditions. All products must include proper hazardous materials labeling and be packaged in strict accordance with MIL-STD standards to meet国防部 logistics and handling requirements. The work is classified as a subcontract under NAICS code 332320, indicating a focus on other fabricated metal product manufacturing, and the place of performance is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026, under the auspices of the Active Devices Division within the Department of Defense, which manages procurement for critical electronic components used in defense systems.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Qualified Electrical Connector ManufacturingThe contract requires the manufacture of 28 units of electrical connector receptacles that must fully comply with the military specification MIL-DTL-28840/14G and be listed on the Qualified Products List for Federal Stock Class 5935. The work involves producing high-reliability connectors to exact military standards, ensuring interoperability, durability, and performance under demanding operational conditions. All units must be fabricated and tested in accordance with the stringent quality controls mandated by the specification to meet defense system requirements. The contract is structured as a subcontract under the NAICS code 332320 for Other Electronic Component Manufacturing and is managed by the Active Devices Division of the Department of Defense. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 23, 2026, and responses must be submitted by August 3, 2026, indicating a short turnaround time for proposal submission. The contract is not subject to any specific set-aside classifications, and all eligible suppliers may respond through the DIBBS platform using the provided reference number.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Manufacture of Electrical BackshellsThe contract is for the manufacture of precision electrical backshells identified by NSN 5935011461983, requiring strict adherence to military specifications for form, fit, and function. These components are critical for secure and reliable electrical connections in defense applications, and production must meet exacting quality and performance standards. The work is being sourced as a subcontract under the NAICS code 332320, which pertains to wiring device manufacturing, indicating the specialized nature of the fabrication process. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, and the place of performance is designated as Hill Air Force Base with ZIP code 84056-5734. The ordering activity is the Active Devices Division within the Department of Defense, reflecting the military’s direct involvement in the requirement. Although no set-aside provisions or point of contact details are provided, the contract is accessible through the DIBBS platform under solicitation number SPE7M526T344M, and all offerors must ensure compliance with military-grade engineering and manufacturing protocols to qualify for award.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

CONNECTOR, PLUG, ELEC

Solicitation # SPE7L4-26-T-5718

The contract solicitation SPE7L4-26-T-5718 seeks 13 units of the electrical plug connector identified by NSN 5935-01-196-4792, with a required delivery within 20 days after award to the Surface Force Logistic Center in Baltimore, Maryland. The solicitation, issued by the Department of Defense’s LSO Combat Vehicles and Armament office, mandates compliance with DLA’s packaging and marking requirements including RP001 for palletization, MIL-STD-129 for item labeling and barcoding, and FED-STD-313 for hazardous materials packaging as defined by the DLA Master List of Technical and Quality Requirements. All items must be physically marked per RQ017 and labeled according to 29 CFR 1910.1200 for hazardous substances. The contract specifies FOB DESTINATION terms, placing all delivery costs and risks on the contractor until goods reach the designated location. Invoicing must be submitted exclusively via the Wide Area WorkFlow system, with manual submissions prohibited, and contractors must register on WAWF to receive payment. Technical and quality compliance is governed by referenced standards and regulatory clauses including ASTM D3951 for non-hazardous item packaging, and the full DFARS and FAR framework applies, including clauses on cyber security (252.204-7012), trafficking in persons, employment eligibility, sustainable products, and prohibitions on hexavalent chromium and covered defense telecommunications equipment. The contract type is not explicitly stated but includes FAR 52.216-1 Alternate I, indicating potential for cost-reimbursement or incentive structures. Offerors must provide a complete data package including information on approved and alternate parts, affirm their small business or socioeconomic status if applicable, and disclose any use of covered defense telecommunications equipment with corresponding UEI and CAGE codes. The solicitation closes on August 5, 2026, and proposals must be submitted electronically through DIBBS. Although pricing data is omitted, historical references suggest a prior unit cost of approximately $1,892.75, but no current pricing or estimated contract value is provided. Inspection and acceptance will occur at the destination by the Government, with standards overseen by the DLA Master List and applicable federal regulations.

Electronic Connector Manufacturing

POSTED

DEADLINE

Solicitation # SPE7L4-26-U-0975

This contract is an indefinite-delivery contract (IDC) issued by the Department of Defense under solicitation SPE7L4-26-U-0975 for the procurement of 175 units of LABEL, identified by NSN 7690015978801, with an estimated total value up to $350,000. The quantity is explicitly noted as an estimate and not guaranteed, and purchases will occur through individual delivery orders issued under the contract’s IDC framework. Delivery is required within 84 days after issuance of a delivery order, with FOB Origin terms applying, meaning the contractor assumes full responsibility for packaging and shipment from the point of origin. All packaging must comply with ASTM D3951, but this is subordinate to the more stringent requirements of the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications. Palletization must conform to RP001: DLA Packaging Requirements for Procurement, and all containers must be marked and labeled in accordance with MIL-STD-129, including barcoding, unit of issue, quantity per unit pack, and hazardous material compliance as per 29 CFR 1910.1200. Inspection and acceptance occur at the destination by the Government. The contract incorporates a comprehensive suite of FAR and DFARS clauses covering equal opportunity, combating trafficking, employment eligibility verification, sustainable products, hazardous material identification, cybersecurity (including NIST SP 800-171 requirements), supply chain restrictions on covered telecommunications equipment, whistleblower protections, and secure handling of government information. Invoicing is mandated through the Wide Area WorkFlow system, and payment details are to be determined at award. Offerors must provide a Unique Entity ID and certify their size status and socioeconomic designations, including small business, HUBZone, WOSB, SDVOSB, or other categories, with full disclosure required for joint ventures. The solicitation prohibits submission of radioactive materials without prior approval and requires compliance with the Buy American Act and Berry Amendment. No formal evaluation factors are published, but award is expected to follow a price-based selection process under an automated system, focusing on technically acceptable offers at the lowest price.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

HANDLE, DOOR, VEHICUL

Solicitation # SPE7L4-26-T-5719

The contract solicitation SPE7L4-26-T-5719 is for the procurement of 68 units of a vehicular door handle (NSN 2540-01-564-0386) at a unit price of $68.00, for a total value of $4,624.00. Delivery is required within 331 days after award, with FOB origin terms and destination inspection and acceptance. The item must be packaged and labeled per MIL-STD-129, with palletization following DLA’s RP001 requirements; if hazardous under FED-STD-313, packaging adherence to TQ Requirement IP025 is mandatory, otherwise commercial packaging per ASTM D3951 applies with precedence given to the DLA Master List of Technical and Quality Requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutions require prior approval. All shipping must be addressed to DLA Distribution Red River in Texarkana, Texas, and invoicing must be conducted electronically through WAWF. The contract includes federal acquisition regulation clauses covering equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, cybersecurity safeguards, NIST SP 800-171 compliance, transportation by sea, and prohibitions on unauthorized obligations. Offerors must comply with representations regarding small business status, UEI and CAGE codes, and disclosure of covered defense telecommunications equipment if applicable. The solicitation imposes no variance in quantity (plus or minus 0%), requires full compliance with all referenced standards, and mandates electronic submission via DIBBS by the deadline of July 31, 2026. The contract type has not been finalized, and no options or extended performance periods are currently defined beyond the base delivery schedule.

Hardware Manufacturing

POSTED

DEADLINE

Hazardous Materials Compliance ConsultingThe contract seeks regulatory consulting services to ensure compliance with OSHA Hazard Communication standards and DFARS requirements concerning hazardous materials identification and documentation. The work involves comprehensive management of Safety Data Sheets, accurate inventorying of hazardous substances, and the preparation of detailed compliance reports to meet federal regulatory obligations. The contractor will be responsible for systematically documenting all hazardous materials used or stored within the scope of the project, ensuring proper labeling, employee training readiness, and alignment with defense-specific procurement regulations. Performance is to be conducted at a location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contract is structured as a subcontract under NAICS code 541620, which designates environmental and other technical consulting services. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, indicating a short, time-sensitive procurement window. The project falls under the purview of the Department of Defense, specifically LSO Combat Vehicles and Armament, and requires precise adherence to defense-industry compliance frameworks, making expertise in both federal safety and defense acquisition regulations essential for successful proposal submission and execution.

Environmental Consulting Services

POSTED

DEADLINE

Transportation and Freight Logistics (FOB Origin)The contract pertains to the coordination and execution of freight movement under FOB Origin terms, encompassing both domestic and international shipping with full compliance to sea transport regulations. Responsibilities include managing the logistics chain from the point of origin through delivery, ensuring adherence to applicable freight and maritime standards regardless of destination. The work will be performed in New Cumberland, Pennsylvania, with the ZIP code 17070-5002 designated as the place of performance, though the actual freight routes may extend globally. The solicitation is classified as a subcontract under NAICS code 484121 which corresponds to general freight trucking, indicating the scope likely involves multimodal transport with trucking as a primary component linked to ocean freight. The contracting activity is under the Department of Defense, specifically managed by LSO COMBAT VEHICLES AND ARMAMENT, highlighting the critical nature of the shipments likely involving military equipment or defense-related cargo. The opportunity was posted on July 30, 2026, with a response deadline of August 10, 2026, and is accessible via a DIBBS platform link. While no set-aside type or point of contact is specified, bidders must be prepared to meet stringent logistical and compliance requirements necessary for defense-related freight operations, particularly those involving international maritime transport.

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Marking and Serialization ServicesThe contract titled Marking and Serialization Services requires comprehensive adherence to MIL-STD-129 standards for the application of standardized markings, labels, and serial number documentation on military equipment and components. This includes the implementation of barcoding, RFID tagging, and the generation of accurate packing lists to ensure end-to-end traceability and logistics compliance. All work must be executed with precision to meet Department of Defense requirements for identification, tracking, and inventory management across the supply chain. Performance is designated for New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the physical location where these services must be rendered. This is a subcontract opportunity under NAICS code 339950, which pertains to other military and defense-related manufacturing activities. The solicitation was posted on July 30, 2026, with a firm response deadline of August 10, 2026. The contract falls under the purview of the LSO Combat Vehicles and Armament office, operated by the Department of Defense, and is accessible through the DIBBS platform. There is no set-aside designation specified, meaning the opportunity is open to all qualified subcontractors without preference for small businesses or other categories. Failure to comply precisely with MIL-STD-129 specifications could result in rejection of deliverables and non-payment.

Sign Manufacturing

POSTED

DEADLINE

Military-Compliant Packaging and Crating ServicesThe contract requires specialized packaging and crating services compliant with MIL-STD-2073-1E and DLA RP001 standards, ensuring materials are properly preserved, cushioned, and containerized for secure military transport. All work must adhere strictly to government-mandated protocols for protection against environmental damage, physical shock, and corrosion during transit, covering the full lifecycle from preparation to final sealing of shipments. The performance location is designated as New Cumberland, Pennsylvania, with an effective deadline for responses set for August 10, 2026, and the solicitation was posted on July 30, 2026. This is a subcontract opportunity under NAICS code 488410, managed by the Department of Defense through its LSO Combat Vehicles and Armament office, targeting vendors capable of delivering defense-grade packaging solutions meeting stringent military specifications.

Motor Vehicle Towing

POSTED

DEADLINE

Hazardous Materials Packaging and LabelingThe contract pertains to the proper handling, packaging, and labeling of hazardous materials in strict adherence to OSHA HAZCOM and MIL-STD-129 standards, requiring accurate documentation of serial numbers and comprehensive safety data for all regulated items. This subcontract is part of a Department of Defense initiative under the LSO COMBAT VEHICLES AND ARMAMENT agency, with performance expected to occur at the facility in New Cumberland, Pennsylvania, 17070-5002. The North American Industry Classification System code 332430 indicates the work involves metal stamping and related manufacturing activities, suggesting the packaging and labeling efforts support defense equipment production. All activities must ensure full regulatory compliance to guarantee safe transportation, storage, and use of hazardous substances within military logistics systems. The solicitation was posted on July 30, 2026, with a firm response deadline of August 10, 2026, at 5:00 PM, indicating a narrow window for qualified subcontractors to submit proposals. The contract does not specify a set-aside type, meaning it is open to all eligible bidders without restrictions based on business size or ownership characteristics. While no point of contact is listed, interested parties can access additional details through the official DIBBS platform using the provided link. Compliance with both federal occupational safety and military shipping standards is non-negotiable, and bidders must demonstrate proven experience with hazardous material protocols, serial number tracking, and safety data sheet management to be considered for award.

POSTED

DEADLINE

Small Business & Socioeconomic Category Subcontracting (Set-Aside Participation)Small businesses and firms belonging to specific socioeconomic categories are invited to participate as subcontractors or suppliers in support of a Department of Defense initiative led by LSO COMBAT VEHICLES AND ARMAMENT. The opportunity is tied to a subcontracting arrangement under NAICS code 332994, targeting potential diversity and inclusion goals for the prime contractor. Responses must be submitted by August 10, 2026, with the solicitation posted on July 30, 2026, and performance expected to take place in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. Participation is designed to help fulfill set-aside objectives, though the specific type of set-aside is not detailed. The engagement is open to qualifying small and socioeconomic category firms seeking to align with federal contracting diversity initiatives. Further details can be accessed through the provided DIBBS link.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Industrial Supply of Specialty ComponentsThe contract calls for the supply of specialty industrial components, with specific requirements for mercury-containing items that must be engineered with shock-proofing and secondary containment systems in compliance with NAVSEA 5100-003D standards. These components are critical for use in defense applications and demand stringent handling and packaging protocols to ensure safety and regulatory adherence throughout transportation and deployment. The work is to be performed at New Cumberland, Pennsylvania, with the ZIP code 17070-5002 identified as the official place of performance. This is a subcontract opportunity under the NAICS code 423830, which pertains to wholesale trade of industrial supplies. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, with no set-aside provisions designated. The contracting activity falls under the Department of Defense, specifically the LSO Combat Vehicles and Armament office, indicating the components are intended for military vehicle or armament systems. All bids must meet the technical and safety specifications outlined in the naval specification to be considered acceptable, and vendors are expected to demonstrate proven capability in handling hazardous materials within defense supply chains.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Global Freight & Defense Logistics ShippingThe contract encompasses the global transportation and logistics management of defense supplies, with strict requirements to use U.S.-flag vessels whenever mandated by regulation and full adherence to Defense Logistics Agency packaging and reporting standards. All freight movement must be executed in compliance with federal defense logistics protocols, ensuring secure, traceable, and timely delivery of critical defense materiel across international boundaries. The work demands specialized expertise in military-grade shipping, documentation, and supply chain integrity under rigorous governmental oversight. Performance is centered at NEW CUMBERLAND, PA, with the obligation to meet all operational timelines and regulatory benchmarks set by the Department of Defense under the LSO COMBAT VEHICLES AND ARMAMENT office. Subcontractors must respond by August 10, 2026, and possess the capacity to handle sensitive defense cargo while maintaining compliance with NAICS code 488510, which governs freight transportation arrangement services. The contract requires full transparency in operations, accurate reporting, and seamless coordination with U.S. defense logistics networks to support national security missions.

Freight Transportation Arrangement

POSTED

DEADLINE

Hazardous Materials Compliance & Packaging ServicesThe contract requires comprehensive packaging, labeling, and documentation services for hazardous materials shipments, with strict adherence to military standards MIL-STD-129 and MIL-STD-2073-1E to ensure proper handling and identification throughout the supply chain. All work must include accurate labeling of hazardous contents and mandatory notifications for any radioactive materials, ensuring full regulatory compliance and safety during transport and storage. The services are critical for supporting Department of Defense operations and must be executed with precision to meet federal and military compliance requirements. This subcontract is solicited under NAICS code 561910 and is performance-based, with the place of performance located in New Cumberland, Pennsylvania, at zip code 17070-5002. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026. The effort supports LSO Combat Vehicles and Armament under the Department of Defense, with all deliverables expected to align with DoD protocols for hazardous material logistics. Participation requires proven expertise in military packaging standards and the ability to manage complex regulatory obligations surrounding dangerous goods and radiological notifications.

Packaging and Labeling Services

POSTED

DEADLINE