Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Guidance Kit (PGK)

Awarded

W15QKN26DA072Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This single award indefinite delivery/indefinite quantity contract, identified by solicitation number W15QKN26DA072, is issued by the Department of Defense through the W6QK Acc-Ri-Picatinny office. The primary objective of the agreement is the manufacturing, inspection, testing, packaging, and delivery of M1156 Precision Guidance Kits and their associated variants. The contract is managed by the agency office located at Picatinny Arsenal in New Jersey, with the place of performance situated in Minnesota. Primary administrative oversight is provided by Alison Oggier and Lauren Tagliente.

General Info

DoD contract for manufacturing and delivering M1156 Precision Guidance Kits in Minnesota.

Agency

Department Of Defense → W6QK Acc-Ri-Picatinny

Contract Value

$862,848,000

NAICS

336419 - Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

Place of Performance

47075, MN, USA

Set-Aside

NONE

Awardee

Northrop Grumman Systems Corporation

Award Issued Date

09/03/2026, 12:00:00 AM UTC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedSep 3

Award Notice

AwardedSep 3

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc-Ri-Picatinny

Contacts2 people available

OfficePICATINNY ARSENAL, NJ, 07806-5000, USA

Organization / AgencyDepartment Of Defense → W6QK Acc-Ri-Picatinny

Office AddressPICATINNY ARSENAL, NJ, 07806-5000, USA

Contacts

Alison Oggier

contact@example.gov

Lauren Tagliente

contact@example.gov

Full Description

Show more

Single Award Indefinite Delivery/Indefinite Quantity (ID/IQ) to manufacture, inspect, test, package, and deliver M1156 Precision Guidance Kits (PGK) and variants.

Similar Contracts

Same NAICS industry code

Solicitation # SPE7M2-26-T-7087

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-386F

Solicitation SPE7M1-26-T-386F is a request for quotations issued by DLA Land and Maritime for the procurement of 25 units of a Synchro, identified by NSN 5990-00-907-0184. The procurement falls under NAICS code 336419 and requires a delivery period of 126 days. The government specifies that inspection and acceptance will occur at the destination. All quotes must be submitted via the DIBBS system by October 8, 2026. Key technical and compliance requirements include a CMMC Level 2 Self-Assessment and adherence to physical identification and bare item marking standards. The contract strictly prohibits the use of Class I ozone-depleting chemicals and the use of additive manufacturing processes unless specifically authorized. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 standards. The award process incorporates the HUBZone price evaluation preference and requires compliance with the Buy American Act and the Berry Amendment. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow system.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Request for Information, Procurement of Klystron Tubes for the Homing All the Way Killer (HAWK) Missile System

Solicitation # W31P4Q-26-R-A006

The U.S. Army Security Assistance Management Directorate is seeking information from prospective contractors for the procurement of Klystron Tubes and Master Oscillators for the Homing All the Way Killer (HAWK) Missile System. This is an all-or-nothing procurement requiring vendors to provide estimated pricing, evidence of past performance with U.S. Government entities, and detailed technical documentation. This documentation must include an implemented quality assurance plan, a HAZMAT plan, and proof of the necessary equipment and resources to meet MIL STD packaging for classified and magnetized items. To be eligible, contractors must maintain a facility clearance level of at least CONFIDENTIAL with a current DSS inspection certificate. Additionally, vendors are responsible for obtaining all source control documents, including drawings and technical data packages, and must possess the special acceptance and inspection equipment required for post-testing, as the government will not provide these materials. This request is for planning purposes and does not constitute a formal solicitation or obligation to purchase.

POSTED

DEADLINE

WIRING HARNESS, BRANCHED

Solicitation # SPE4A6-26-R-0297

This firm fixed price solicitation, issued by the DLA Aviation ASC Commodities Division, is for the procurement of 6,622 branched wiring harnesses under NSN 5995-01-188-3269. This is a total small business set-aside with a delivery schedule of 570 days after award. The process includes a First Article Test (FAT) requirement, where the contractor must deliver a FAT report within 120 days, followed by a 60-day government evaluation period, and a final production delivery window of 399 days post-approval. Inspection and acceptance are conducted at the origin, with the final delivery point located in New Cumberland, Pennsylvania. The contract is subject to strict export controls under ITAR and EAR, requiring contractors to have an approved US/Canada Joint Certification Program certification and complete specific DLA training. Technical and quality requirements are governed by the DLA Master List, and packaging must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. Award decisions will be based on best value, with a heavy emphasis on SPRS assessments and past performance. Additionally, the contractor must meet CMMC Level 2 certification and utilize the Wide Area Workflow (WAWF) system for all invoicing and receiving reports.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

STRICKER ASSEMBLY,

Solicitation # SPE4A5-26-T-470W

Solicitation SPE4A5-26-T-470W is a fixed-price request for the procurement of seven Stricker Assemblies, identified by NSN 1440-00-038-4796 and Boeing part number 25-73582-1. Issued by the Defense Logistics Agency, the requirement is categorized under NAICS 336419. The delivery period is 170 days after award, with a need ship date of March 21, 2027, and an original required delivery date of December 9, 2028. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict quality and technical compliance, requiring manufacturers to adhere to ISO 9001:2015 or SAE AS9003 standards. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA requirement RP001. Key regulatory requirements include CMMC Level 2 self-assessment, Buy American Act compliance, and the safeguarding of covered defense information per DFARS 252.204-7012. Invoicing and payment processing must be conducted through the Wide Area Workflow system. Quotes are submitted electronically via the DIBBS portal, and the use of additive manufacturing for the supplied parts is prohibited unless specifically authorized.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

DETENT ASSEMBLY, GUIDED

Solicitation # SPE4A6-26-T-35WF

Solicitation SPE4A6-26-T-35WF is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of three units of Detent Assembly, Guided Missile Launcher, identified by NSN 1440-01-538-5531. The procurement falls under NAICS code 336419 and requires a delivery period of 158 days, with a need ship date of March 8, 2027. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract is subject to stringent quality and technical requirements, including the DLA Master List of Technical and Quality Requirements and specific sampling plans such as MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, while hazardous materials must be labeled according to the Hazard Communication Standard. Due to the nature of the equipment, the contract includes strict export controls under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the award is subject to the Buy American Act, the Berry Amendment, and cybersecurity requirements including CMMC Level 2 and DFARS 252.204-7012. All quotes must be submitted electronically via the DIBBS system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

in about 23 hours

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-T-35VP

Solicitation SPE4A6-26-T-35VP is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of four cable assemblies, identified by NSN 1420-01-714-8769. The requirement includes a mandatory Production Lot Test (PLT) to validate quality conformance, with delivery expected within 345 days for the hardware and 285 days for the PLT. Inspection and acceptance are both set at the point of origin, and the manufacturer's inspection system must comply with ISO 9001:2015 or an equivalent standard. The contract contains stringent security and compliance mandates, including CMMC Level 2 certification and adherence to DFARS 252.204-7012 for safeguarding covered defense information. Due to the nature of the technical data, the item is subject to ITAR or EAR export controls, requiring offerors to have an approved US/Canada Joint Certification Program certification. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, and all payment requests must be processed through the Wide Area WorkFlow system. Additionally, the solicitation provides a price evaluation preference for SBA-certified HUBZone small businesses and requires compliance with the Buy American Act and Berry Amendment.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

in about 23 hours

CONVERTER, WAVE FORM

Solicitation # SPE7M1-26-U-6262

Solicitation SPE7M1-26-U-6262 is a request for quotations issued by DLA Land and Maritime for the procurement of wave form converters, identified by NSN 6625013316390. This is a total small business set-aside under a unilateral indefinite delivery contract with a maximum value of 350,000.00 dollars. The estimated annual quantity is 14 units, with a delivery requirement of 107 days after the order. The contract specifies that the items are critical application items and may be sourced from Ametek, Inc. or Lockheed Martin Corporation. The procurement includes strict technical and safety requirements, including a prohibition on the intentional addition of mercury and compliance with CMMC Level 2 self-assessment for cybersecurity. Packaging and marking must adhere to MIL-STD-129 and MIL-STD-2073-1E, with specific hazardous material shipping protocols per IP025 and the Hazard Communication Standard. Inspection and acceptance will occur at the destination. Payment and invoicing must be processed through the Wide Area WorkFlow system. The government will not evaluate offers utilizing additive manufacturing unless specifically authorized.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

HEATER, THERMAL RELEASE

Solicitation # SPE7M1-26-U-6540

Solicitation SPE7M1-26-U-6540 is a request for quotations issued by DLA Land and Maritime for the procurement of thermal release heaters, identified by NSN 5999005049617. This is a total small business set-aside for a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars. The estimated requirement is for 74 units, with a delivery window of 118 days after order. The contract specifies that items are delivered FOB Origin, with inspection and acceptance occurring at the destination. The procurement includes strict technical and quality requirements, including a prohibition on the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Packaging must adhere to MIL-STD-2073-1E and marking must comply with MIL-STD-129. All quotes must be submitted via the DLA Internet Bid Board System, and the government will not evaluate offers utilizing additive manufacturing unless specifically authorized. Payment processing is required through the Wide Area WorkFlow system.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Wiring Upgrade/ReplacementThis subcontract for the Department of the Navy's Navsup Weapon Systems Support involves the supply and installation of aerospace-grade wiring for projects located in Philadelphia. The scope of work requires the removal of obsolete wiring and the installation of new SAE-AS22759 series wire, with a strict prohibition against using MIL-W-81381 materials. The final deliverable is a fully installed and tested wiring harness within the Fairing Assembly. To ensure quality and compliance, all personnel performing the work must be certified to IPC/EIA-STD-001C standards. This opportunity falls under NAICS code 336419 and has a response deadline of October 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Fairing Assembly Overhaul and Repair ServicesThis subcontract for Fairing Assembly Overhaul and Repair Services supports NAVSUP Weapon Systems Support Philadelphia projects through the comprehensive overhaul, upgrade, and repair of fairing assemblies. The selected provider will be responsible for evaluating and troubleshooting components, replacing damaged parts, and reassembling units according to approved manuals. All work must be performed in an enclosed warehouse using the contractor's own fixtures, jigs, and special tooling, with final deliverables consisting of Ready for Issue fairing assemblies and detailed inspection reports. To qualify, the contractor must maintain ISO 9001 or AS9100 certification and employ personnel certified in IPC/EIA-STD-001C. The project falls under NAICS code 336419 and is managed by the Department of the Navy. Interested parties must submit their responses by October 19, 2026, for performance in Philadelphia, Pennsylvania.

Navsup Weapon Systems Support

POSTED

DEADLINE

Missile Extractor Loader and Vertical Handling Adapter

Solicitation # N0016426RGW22

Solicitation N0016426RGW22 is a firm-fixed-price, five-year IDIQ contract issued by NSWC Crane for the procurement of pier side support equipment. The scope of work involves the manufacture and delivery of ten Missile Extractor Loaders (MEL) and eleven Vertical Handling Adapters (VHA), including one first article unit. The contract period of performance runs from September 2026 to September 2031, with a delivery schedule typically requiring the first units six months after receipt of order, followed by subsequent production units every three months. This opportunity is 100 percent set aside for small businesses under NAICS code 336419. The government will award the contract based on best value, evaluating proposals through a tradeoff analysis of technical capability, past performance, pricing, and contract documentation. Technical expertise and past performance are weighted most heavily. Contractors must comply with ISO 9001 quality standards and adhere to strict packaging and marking requirements, including MIL-STD-129R and MIL-STD-130N. Special requirements include the prohibition of mercury on specific hardware surfaces, compliance with CMMC cybersecurity levels, and the use of the Wide Area Workflow system for invoicing. Proposals must be submitted via email or DoD SAFE to the designated contracting office by October 16, 2026.

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QK Acc-Ri-Picatinny

Same awarding agency

Snow and Ice Removal Services at the SGT Catalin D. Dima AFRC, 910 RAZ Ave., New Windsor NY 12553

Solicitation # W15QKN26QA180

Solicitation W15QKN26QA180 is a 100 percent Small Business Set-Aside for a Firm Fixed Price requirements contract to provide snow and ice removal services at the SGT Catalin D. Dima AFRC in New Windsor, New York. The contract consists of a twelve month base period starting December 4, 2026, with four subsequent twelve month option periods. The scope of work includes plowing and shoveling designated areas, with specific requirements for tiered snow removal based on accumulation levels and sidewalk clearing. The contractor must provide all necessary personnel, equipment, and fuel, adhering to a two hour response time upon notification and providing time stamped before and after photos for invoice verification. The government will award the contract to a responsible offeror based on price and past performance. Technical specifications include a detailed snow removal map covering 153,720 square feet of plowing and 24,480 square feet of shoveling. Performance is monitored via a Quality Assurance Surveillance Plan and documented through specific inspection sheets. Offerors must submit quotes electronically via the PIEE Solicitation Module by September 30, 2026, including a valid Certificate of Insurance and completed SF 1449 forms. Payment and invoicing are processed through the Wide Area WorkFlow system.

Other Services to Buildings and Dwellings

POSTED

DEADLINE

155mm Modular Artillery for Combat Effectiveness (MACE)

Solicitation # W15QKN26R1C5R

The 155mm Modular Artillery for Combat Effectiveness (MACE) program is a prototype project issued by the Army Contracting Command-Rock Island at Picatinny under the authority of 10 U.S.C. § 4022. The objective is to develop and qualify 155mm cargo-carrying artillery projectile prototypes featuring interchangeable lethal and non-lethal payload capabilities. These projectiles must be compatible with M777A2 and M109A7 howitzers, deliver effects at ranges of 30 km to 35 km when fired from 39-caliber systems, and maintain a standard interface for existing qualified fuzes. The government intends to award up to two Other Transaction Agreements (OTAs) to performers capable of establishing a resilient, scalable domestic manufacturing base. The project is structured in two phases, with Phase I focusing primarily on schedule and Phase II emphasizing technical performance. Key deliverables include the production of up to 115 projectiles for engineering tests, 335 for limited safety tests, and up to 1,200 IPB prototypes. To be eligible, at least one nontraditional defense contractor or nonprofit research institution must participate significantly, and at least one third of the total project cost must be funded by non-federal sources. Proposals are due by October 30, 2026, and must be submitted via SAM.gov in specific volumes, with strict page limits and formatting requirements. Access to sensitive technical data packages requires the submission of a non-disclosure agreement, a technical data request questionnaire, and a military critical technical data agreement.

Ammunition (except Small Arms) Manufacturing

POSTED

DEADLINE

in about 1 month

Sand Barrel Provision and MaintenanceThis subcontract with the Department of Defense, specifically the W6QK Acc-Ri-Picatinny agency, involves the provision and maintenance of sand barrels for prime contractors at Army Contracting Command-Rock Island facility projects. The contractor is responsible for delivering 30-gallon containers equipped with scoops and weather-protective lids, ensuring barrels remain at 50 percent capacity during winter, and managing the seasonal placement and removal of the units. Additionally, the contractor must perform necessary repairs within one business day of notification. The opportunity is designated as a total Small Business Set Aside under NAICS code 561790. It was posted on September 17, 2026, with a response deadline of September 30, 2026. Performance of these services will take place in the 02905 zip code area.

Other Services to Buildings and Dwellings

POSTED

DEADLINE

On-Call Sanding and Salting ApplicationThis subcontract for the Department of Defense, specifically the W6QK Acc-Ri-Picatinny agency, involves on-call sanding and salting applications for prime contractors at Army Contracting Command-Rock Island facility projects. The primary objective is to maintain safe, non-slippery conditions on parking areas and sidewalks through the application of sand and salt, including post-storm treatments and the removal of excess sand at the end of the season. The opportunity is a total Small Business Set Aside under NAICS code 561790. All personnel assigned to the project must comply with NCIC-III/TSDB standards and complete Antiterrorism/OPSEC Level I training. The response deadline for this requirement is September 30, 2026.

Other Services to Buildings and Dwellings

POSTED

DEADLINE

Specialized Sand and Salt Material SupplierThis subcontract opportunity with the Department of Defense, specifically the Army Contracting Command-Rock Island facility, seeks a supplier for approved sanding and salting materials. The contractor is responsible for delivering bulk certified sand and salt to designated sites or staging areas. The required sand must be clean, inert quartz or hard durable rock that adheres to AASHTO-T11 standards, with a maximum particle size of 1/4 inch and no more than 10 percent by weight passing through a No. 200 sieve. This procurement is designated as a total Small Business Set Aside under NAICS code 423390. The response deadline for this requirement is September 30, 2026, with performance taking place in the 02905 zip code area.

Other Construction Material Merchant Wholesalers

POSTED

DEADLINE

Snow Plowing and Ice Removal (Parking Lots, Driveways, and Facilities)This subcontract opportunity with the Department of Defense involves providing snow and ice removal services for prime contractors at the ESEK Hopkins AFRC facility under the Army Contracting Command-Rock Island. The scope of work includes plowing parking lots and entrances to bare pavement, clearing hydrants and dumpsters, and utilizing snow blowers or hand shovels for HVAC units. All equipment used must comply with Army Regulation 420-1, and the contractor is required to provide time-stamped photo documentation upon completion of the services. The project is designated as a total Small Business Set Aside under NAICS code 561790. Personnel assigned to the site must meet NCIC-III/TSDB standards and have completed Antiterrorism/OPSEC Level I training. Interested parties must respond by September 30, 2026, for performance at the facility located in zip code 02905.

Other Services to Buildings and Dwellings

POSTED

DEADLINE

De-Icing Application & Maintenance ServicesThis subcontract for De-Icing Application and Maintenance Services supports the 99th Readiness Division under the Department of Defense. The selected provider will perform on-call sanding and salting of sidewalks and parking lots, manage the refilling of on-site sand barrels, and handle the removal of excess sand at the end of the season. The primary objective is to ensure all treated surfaces remain free of ice and that sand barrels are consistently maintained. The contract requires a strict two-hour response time and mandates that personnel have NCIC-III/TSDB adjudication. This opportunity is designated as a total Small Business Set Aside under NAICS code 561730, with performance taking place in zip code 12553. Responses are due by September 30, 2026.

Landscaping Services

POSTED

DEADLINE

De-Icing Material Supply (Sand & Salt)This subcontract opportunity with the Department of Defense, specifically the W6QK Acc-Ri-Picatinny agency, involves the supply and bulk delivery of industrial-grade sand and salt for ice control on 99th Readiness Division projects. The contractor is required to provide quartz sand that meets AASHTO-T11 standards, ensuring a maximum of 10 percent passes the No. 200 sieve and adheres to sand borrow maximum particle size M1.04.0 Type a. All materials must be free from clay or loam coatings and are subject to approval by the COR/RFOS. The procurement is designated as a total Small Business Set Aside under NAICS code 423390. Performance will take place in the 12553 zip code area. Interested parties must submit their responses by the deadline of September 30, 2026, following the posting date of September 17, 2026.

Other Construction Material Merchant Wholesalers

POSTED

DEADLINE

Specialized HVAC Unit ClearingThis subcontract for the Department of Defense, specifically the W6QK Acc-Ri-Picatinny agency, involves specialized snow and ice removal from HVAC units for prime contractors on 99th Readiness Division projects. The primary objective is to ensure clear access to HVAC control panels by clearing all sides of the units using hand tools or snow blowers, though plowing is strictly prohibited. The opportunity is a total Small Business Set Aside under NAICS code 561730, with performance taking place in zip code 12553. Personnel assigned to this contract must meet strict security requirements, including NCIC-III and TSDB adjudication standards, as well as the completion of iWATCH and OPSEC training. Responses are due by September 30, 2026.

Landscaping Services

POSTED

DEADLINE

Sidewalk & Pedestrian Clearing ServicesThis subcontract for Sidewalk and Pedestrian Clearing Services supports prime contractors on 99th Readiness Division projects under the Department of Defense. The scope of work involves snow and ice removal from sidewalks, pathways, landings, and entrance ramps, as well as clearing dumpsters, catch basins, and hydrants using hand tools and snow blowers. Additionally, the contractor is responsible for sanding and salting during slippery conditions to ensure safe pedestrian access to all facilities. The opportunity is a total Small Business Set Aside under NAICS code 561730, with performance located in zip code 12553. Key operational requirements include a strict two-hour response time and the necessity for NCIC-III/TSDB adjudication. The response deadline for this solicitation is September 30, 2026.

Landscaping Services

POSTED

DEADLINE

Heavy Snow Plowing & Hauling ServicesThis subcontract for Heavy Snow Plowing and Hauling Services supports the 99th Readiness Division under the Department of Defense agency W6QK Acc-Ri-Picatinny. The contractor is responsible for large-scale snow removal, including plowing driveways and parking areas, managing snowbank heights, and utilizing heavy-duty trucks to relocate excessive snow accumulations off-site. Key deliverables include cleared gates, driveways, and parking lots, with a strict requirement for a two-hour response time and adherence to NCIC-III and TSDB adjudication standards. The opportunity is designated as a Total Small Business Set Aside under NAICS code 561730, with the place of performance located in zip code 12553. Interested parties must submit responses by September 30, 2026, following the posting date of September 17, 2026.

Landscaping Services

POSTED

DEADLINE

Shank 2.0 payload, training warhead, and pre-packed anti-personnel warhead

Solicitation # W15QKN-26-X-1CFG

The U.S. Army Contracting Command-Rock Island at Picatinny (ACC-RIP), acting for the Office of the Project Manager, Close Combat Systems, is conducting market research via a sources sought notice (W15QKN-26-X-1CFG) to identify potential industry partners for the production of Shank 2.0 payloads, training warheads, and pre-packed anti-personnel warheads for small Unmanned Aerial System (sUAS) platforms. The government is seeking capabilities statements from interested firms, including those in all small business set-aside categories, to evaluate their ability to manufacture these systems using the small Universal Payload Interface (sUPI) and Picatinny CLIK standards. A critical requirement is the ability to scale production capacity up to 40,000 systems per month, for which respondents must provide Rough Order of Magnitude (ROM) pricing and implementation schedules. Additionally, the government is soliciting industry recommendations to improve the Technical Data Package (TDP) for better producibility. Due to the nature of the technology, this effort is subject to strict export controls under the Arms Export Control Act and the Export Administration Act of 1979. Interested respondents must possess a facility clearance to handle classified material and submit a DD Form 2345 Militarily Critical Technical Data Agreement to access the TDP. The government intends to utilize the results of this research to solicit under Title 10 USC 4022 and 4023 authorities for prototype and experimental procurement. Submissions must include detailed company information, CAGE and UEI codes, and evidence of technical expertise regarding High Voltage Electronic Safe and Arm Device (ESAD) initiation systems and Low Energy Exploding Foil Initiator (LEEFI) or shock tube initiation chains.

Small Arms Ammunition Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS