Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Hardware Manufacturing – Tapping Screws

Active

Federal

Response Deadline08/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the manufacture of 18 units of tapping screws conforming to military specification MS51869-25, requiring strict adherence to material composition, dimensional tolerances, and performance benchmarks established by the Department of Defense. Each unit must be properly marked in accordance with MIL-STD-130N to ensure traceability and compliance with federal procurement standards. The work is classified as a subcontract under NAICS code 332722 and is being managed by the ASC Commodities Division of the Department of Defense, with performance required at New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 31, 2026, and proposals must be submitted by August 5, 2026, with all responses directed through the DIBBS platform using the provided reference number.

General Info

Manufacture 18 military-spec tapping screws per MS51869-25, marked per MIL-STD-130N, due August 5, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of 18 units of tapping screws per military specification MS51869-25, including compliance with material, dimensional, and performance standards, and marking per MIL-STD-130N.

Similar Contracts

Same NAICS industry code

Supply of Welding Studs (NSN 5307-01-529-7683)The contract seeks the manufacture and delivery of 201 units of welding studs identified by NSN 5307-01-529-7683, fully compliant with military specifications and technical standards. All items must meet rigorous quality and performance requirements, including proper packaging, labeling, and adherence to export control regulations to ensure secure handling and distribution. The work is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The opportunity is structured as a subcontract under the NAICS code 332722, which corresponds to small arms, ordnance, and ordnance accessories manufacturing. The solicitation was posted on July 31, 2026, with a response deadline of August 5, 2026, indicating a short turnaround for qualified vendors to submit proposals. The contracting entity is the Aviation Supply Chain under the Department of Defense, emphasizing the critical nature of the components for military aviation systems.

AVIATION SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

NUT, PLAIN, EXTENDED

Solicitation # SPE4A6-26-T-09HS

The contract solicitation SPE4A6-26-T-09HS issued by the Defense Logistics Agency’s ASC Commodity Division seeks the procurement of 50 hardcase units of the NUT, PLAIN, EXTENDED, identified by NSN 5310-01-392-9590, to be delivered FOB ORIGIN to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required delivery date of October 14, 2026, or 324 days after award. The item must comply with strict military and DLA specifications including packaging per MIL-STD-2073-1E, preservation method 10 with cleaning and drying, and marking consistent with MIL-STD-129, including 2D Data Matrix barcoding and no special marking code. Physical identification of bare items must adhere to RQ017, and palletization must follow DLA Packaging Requirements RP001. Quality control requires sampling per MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances acceptable unless otherwise stated; unspecified attributes are treated as major with an AQL of 1.0. Inspection and acceptance occur at the destination point by the government. All payment requests and receiving reports must be submitted electronically via WAWF, and contractors must comply with DFARS clauses regarding cybersecurity, hazardous materials, export controls, trafficking in persons, employment eligibility, sustainable products, and prohibition of hexavalent chromium. The contract includes clauses for safeguarding covered defense information per NIST SP 800-171, prohibition on acquiring items from Communist Chinese military companies, and restrictions on arbitration agreements. No pricing is provided in the solicitation, and the contract type, award basis, or evaluation factors are not specified, indicating this is a simplified acquisition likely under LPTA standards. Offerors must submit electronically via DIBBS by August 5, 2026, and are required to provide UEI and CAGE codes, represent size and socioeconomic status, and disclose if supplying covered telecommunications equipment. The contract enforces a zero variance in quantity and mandates compliance with the DLA Master List of Technical and Quality Requirements referenced by R001.

ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

PLATE, MOUNTING

Solicitation # SPE7L1-26-Q-1419

The contract specifies the procurement of 292 mounting plates identified by NSN 5340-01-578-1311 under solicitation SPE7L1-26-Q-1419, with delivery required within 104 days after award and a firm fixed price structure with no tolerance for quantity variation. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, and compliance with MIL-STD-130N for identification marking of military property is mandatory. The item must adhere to stringent packaging standards outlined in DLA’s RP001 and MIL-STD-129, with hazardous materials conforming to FED-STD-313 and TQ requirement IP025 while non-hazardous materials must comply with ASTM D3951 under DLA’s overarching authority. Ozone-depleting chemicals are strictly prohibited, and any alternative substances require prior approval unless explicitly authorized by the specification. The product must be sourced from qualified manufacturers listed on approved QPLs or QMLs as referenced in the associated technical documentation, and manufacturing must meet ISO 9001:2015 quality management standards. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stipulated. The item is subject to configuration change management procedures and covered defense information controls, and all packaging must be labeled and palletized per DLA guidelines. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation logistics governed by DLAD procedural notes C19 and C20. The contract mandates full and open competition and applies to a Federal procurement with a NAICS code of 332722.

LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Solicitation # SPE4A1-26-T-0556

The contract pertains to the procurement of 80 units of STUD, WELDING with NSN/Part Number 5307-01-529-7683, under solicitation SPE4A1-26-T-0556, issued by the Department of Defense through the Aviation Supply Chain office. The response deadline is August 5, 2026, with delivery required within 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation issue or award date depending on acquisition size. The item is subject to stringent export control regulations under ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Commerce, and compliance with DFARS 252.225-7048 is mandatory. Only contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA authorization may access the associated technical data. Additionally, the item must comply with DLA packaging requirements, quality conformance inspections, and physical identification and marking standards. Drawings are accessible via the DIBBS portal during open solicitation, and the place of performance is specified as New Cumberland, Pennsylvania, 17070-5002. The primary point of contact is Jade Stringfield, reachable via email and phone provided.

AVIATION SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

SCREW, CAP, HEXAGON H

Solicitation # SPE4A6-26-T-04MJ

The contract pertains to the procurement of 33 units of a hexagon head cap screw identified by the NSN 5305-01-241-6224 under purchase request 7017199954. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, is designated by the solicitation number SPE4A6-26-T-04MJ and was posted on July 7, 2026, with a response deadline of July 15, 2026. This federal procurement is open for bids in accordance with standard government contracting procedures, and the place of performance and shipping details are not specified in the provided data. Interested parties must submit responses through the official DIBBS portal linked in the solicitation before the deadline to be considered.

ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-09HR

The contract solicitation SPE4A6-26-T-09HR calls for the procurement of 80 machine bolts, specifically self-locking bolts identified by NSN 5306-01-175-5359, under a simplified acquisition framework. Delivery is required FOB Origin within 155 days of award, with the final destination being the DDSP New Cumberland Facility in Pennsylvania, and all inspections and acceptances are to occur at the manufacturer’s or supplier’s location. The item is procured against a military or federal specification and is not subject to shelf life restrictions or Item Unique Identification requirements as per DFARS 252.211-7003(c)(1)(i). Packaging, marking, and preservation must strictly comply with DLA Master List requirements, particularly RP001 for palletization and packaging, MIL-STD-129 for shipping labels and barcoding, and MIL-STD-130N for bare item identification including manufacturer logo, lot number, and material identification. Hazardous materials labeling must adhere to 29 CFR 1910.1200, and safety data sheets must be submitted prior to award. The contract incorporates numerous Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses mandating compliance with cybersecurity standards including safeguarding covered defense information under 252.204-7012 and alignment with NIST SP 800-171 requirements through 252.240-7997, with deviations authorized under specific tracking numbers. Provisions prohibit the acquisition of covered telecommunications equipment from entities like Huawei or ZTE and require contractors to inform employees of whistleblower rights. Payment must be submitted electronically via Wide Area WorkFlow, and all subcontracting for commercial products follows specific clauses with deviations. The contracting officer is Debra Fowler of the Department of Defense’s ASC Commodities Division, and offerors must hold a Valid Unique Entity ID and CAGE code, with small business representation mandatory under FAR 52.219-1. All material must conform to ASME B18.2.1 standards and be produced under a quality management system compliant with SAE AS9003 or ISO 9001 as tailored. The solicitation does not include pricing details, contract value estimates, or evaluation factors, and submissions must be made exclusively through the DIBBS portal with no paper submissions permitted.

ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

NUT, PLAIN, SLOTTED, H

Solicitation # SPE4A6-26-T-08RR

The contract covers the procurement of 70 units of NUT, PLAIN, SLOTTED, H, identified by NSN 5310-01-559-2806, under solicitation SPE4A6-26-T-08RR, issued by the ASC Commodities Division of the Department of Defense. Delivery is required within 171 days after award, with FOB Origin terms, and acceptance occurs at the origin point. The items must conform to the technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other references including ASTM D3951. The product specification aligns with DIN979 Revision dated 10/01/2010, and manufacturing must comply with tailored quality requirements per RQ001, including compliance with SAE AS9003 or ISO 9001 as implemented through an inspected quality system. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample lot unless otherwise directed, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging and marking must adhere to MIL-STD-129 and RP001 for palletization, with bare item marking required per RQ017 and removal of government identification from non-accepted supplies mandated by RQ011. Hazardous materials must be labeled in accordance with OSHA’s Hazard Communication Standard and accompanied by approved safety data sheets prior to award. All packaging must also reflect the specified Unit of Issue and Quantity per Unit Pack as defined in the contract. The contract mandates use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports, with payment routing determined by the award-specific DoDAAC. Cybersecurity requirements under NIST SP 800-171 and DFARS 252.204-7012 are enforced, requiring implementation of security controls and reporting of cyber incidents within 72 hours. The solicitation includes mandatory clauses on equal opportunity, combating trafficking in persons, employment eligibility verification, sustainable products, and unauthorized obligations, all subject to deviations. Offerors must hold a valid UEI and CAGE code and comply with socioeconomic representations for small business, HUBZone, or other designated categories. Pricing is provided as a total

ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

NUT, SELF-LOCKING, EX

Solicitation # SPE4A6-26-T-57S2

The contract is for 268 self-locking nuts with an extended washer and hexagonal configuration, identified by NSN 5310-01-342-2011, under solicitation SPE4A6-26-T-57S2. The product must meet the latest revision of the original equipment manufacturer’s drawing and comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which are incorporated by reference. Identification marking of the nuts must follow MIL-STD-130N dated 16 Nov 2012, including manufacturer’s logo, lot number, and material identification, excluding any government-specific identifiers on non-accepted supplies. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The supplier must also maintain Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment compliance and handle covered defense information appropriately. The delivery deadline is 169 days from award, and the place of performance is Tracy, CA, 95304-5000. The solicitation was posted on July 31, 2026, with a response deadline of August 5, 2026, and the contracting office is the ASC Commodities Division of the Department of Defense, with Alexander Sotos as the primary point of contact.

ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

Solicitation # SPEFA5-26-Q-0066

This contract specifies the procurement of a single NAS1958C28R bolt under part number 5306-LN0034747 with a firm fixed price and no variance in quantity allowed. The item must be delivered within 30 days after the award date to the destination specified, with inspection and acceptance occurring upon delivery. The product must comply with technical and quality requirements referenced from the DLA Master List, including packaging standards per ASTM D3951 and labeling requirements per MIL-STD-129, with precedence given to the DLA Master List when conflicts arise. Packaging must align with DLA-specific procurement guidelines, including palletization per RP001, and sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The unit of issue is each, and physical identification of the bare item must adhere to RQ017 requirements. The delivery is directed to the Fleet Readiness Center at Cherry Point, North Carolina, with the solicitation number SPEFA5-26-Q-0066 and a response deadline of August 7, 2026, with a required ship date of July 8, 2026.

DLA FLEET READINESS CENTER DLA PSC

POSTED

about 24 hours ago

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE4A7-26-Q-0942

The contract involves the procurement of 55 units of a clamp and coupling nut identified by NSN 0001S00000053 under solicitation SPE4A7-26-Q-0942, with a delivery requirement of 142 days after award. Technical and quality requirements referenced in the solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Items must be physically marked in accordance with RQ017, and sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified. Critical, major, and minor attributes are to be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The item contains technical data subject to export controls under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; access is limited to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and inspection and acceptance occur at the manufacturer’s facility. All data and communications are subject to covered defense information policies. The contracting office is the ASC Supplier Oper AE and AF Division within the Department of Defense, with Dedrick Benson as the primary point of contact.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

Solicitation # SPE4A1-26-T-1482

This contract solicits the procurement of 169 units of a welding stud identified by NSN/Part Number 5307-01-529-7683, with delivery expected within 166 days after the award date. The solicitation number is SPE4A1-26-T-1482, posted on February 24, 2026, with a response deadline of March 4, 2026. The acquisition is managed by the Department of Defense’s Aviation Supply Chain office, with performance located in New Cumberland, PA, under NAICS code 332722. The primary contact for this solicitation is Jade Stringfield. The contract incorporates Defense Logistics Agency (DLA) packaging, technical, and quality requirements as detailed in the DLA Master List, enforcing key provisions such as quality conformance inspections, physical identification and marking of bare items, and strict handling of export-controlled technical data under ITAR and EAR regulations. Only contractors approved through DLA’s US/Canada Joint Certification Program and trained in proper export controls may access sensitive technical data involved in this procurement. Additionally, government identification must be removed from non-accepted supplies, and drawings relevant to this solicitation are available through DLA’s specified online portals during the open solicitation period.

AVIATION SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

BOLT SET, ENGINE SHA

Solicitation # SPE4A6-26-T-09LA

The contract pertains to the procurement of one set of bolt assemblies designated as BOLT SET, ENGINE SHA with NSN 5306015786524, issued under solicitation SPE4A6-26-T-09LA by the ASC Commodities Division of the Department of Defense. Delivery is mandated within five days after order placement, with title and risk of loss transferring to the Government at origin under FOB ORIGIN terms, while inspection and acceptance occur at the designated destination: Marine Aviation Logistics Squadron 26 at MCAS New River, Jacksonville, NC. Packaging must adhere to ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which takes precedence, and all packaging must be labeled per MIL-STD-129 with correct unit of issue (SE) and quantity per unit pack as specified. Palletization must comply with DLA Packaging Requirements RP001, and shipment must be made by the fastest traceable means, prohibiting parcel post; the RDD code 777 and supplier address SIG: A indicate specific logistics directives. Quality assurance requires sampling based on MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based plan, with zero non-conformances mandated in the sample unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0, respectively. The item is classified as a Critical Application Item and subject to cybersecurity compliance under CMMC Level 2 Self-Assessment, with Covered Defense Information governed by RD002. Unit identification is not required as per DFARS 252.211-7003(c)(1)(i), though supplier representations must include UEI and CAGE Code if providing covered defense telecommunications equipment. All hazardous materials must bear labels complying with 29 CFR 1910.1200 and DFARS 252.223-7001, with mandatory submission of MSDS and labeling plans prior to award. Contract clauses include mandatory representations for small business status, trafficking in persons compliance, employment eligibility, sustainable product use, and accelerated payments to small business subcontractors, along with safeguarding requirements for contractor information systems. The solicitation requires electronic submission via DIBBS by July 31, 20

ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Quality Assurance and Inspection Services (MIL-STD-1916 Compliance)The contract mandates independent quality verification services adhering to MIL-STD-1916 sampling procedures to assess compliance of delivered units against defined acceptable quality levels for critical, major, and minor defects. This ensures that all products meet rigorous military standards for reliability and performance, with inspection outcomes directly tied to acceptance or rejection criteria based on statistically valid sampling methods. The work is performed under a subcontract structure and is specifically scoped to maintain stringent quality control protocols throughout the delivery process. Quality assurance activities are to be conducted at the place of performance located in Cherry Point, North Carolina, with the contract being administered by the ASC Commodities Division under the Department of Defense. The solicitation was posted on July 31, 2026, and responses are due by August 5, 2026, indicating a short turnaround window for qualified vendors to submit proposals. The North American Industry Classification System code 541330 identifies this as a professional, scientific, and technical services requirement centered on quality control and testing, targeting specialized subcontractors with demonstrated expertise in defense-related inspection and compliance.

Engineering Services

POSTED

about 24 hours ago

DEADLINE

Packaging, Labeling, and Palletization Services for Military ShipmentThe contract requires specialized preservation, packaging, labeling, and palletization services for indicating panels in full compliance with MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, ensuring military-grade readiness for transport and storage. All work must be performed to meet strict federal specifications for durability, identification, and handling procedures, with final delivery designated as FOB Origin, meaning the contractor assumes responsibility until the goods are loaded at the designated point of shipment. The services are critical to supporting military logistics and must be executed with precision to maintain supply chain integrity. This subcontract, issued under NAICS code 493190 by the ASC Commodities Division of the Department of Defense, is solicited with a response deadline of August 5, 2026, and the performance location is tied to Cherry Point, North Carolina, with ZIP code 28533-5040. Although no set-aside designation is specified, participation is open to qualified vendors capable of delivering compliant solutions under tight federal guidelines. The solicitation is managed through the DIBBS platform, and timely submission is essential to be considered for award.

Other Warehousing and Storage

POSTED

about 24 hours ago

DEADLINE

Manufacture and Supply of Indicating Light Panel (NSN: 6220013547598)The contract requires the full manufacturing, testing, packaging, and delivery of four military-spec indicating light panels identified by NSN 6220013547598, with strict compliance to MIL-STD-129, MIL-STD-2073-1E, and DLA RP001 standards for documentation, packaging, and labeling. All work must be performed to meet rigorous defense specifications ensuring operational readiness and interoperability within military systems. The panels are to be delivered to a designated performance location in Cherry Point, North Carolina, with zip code 28533-5040, and the contract falls under NAICS code 335313 for electrical lighting equipment manufacturing. This is a subcontract opportunity issued by the ASC Commodities Division under the Department of Defense, with a response deadline of August 5, 2026, and a posted date of July 31, 2026. The solicitation is accessible via the DIBBS portal and requires precise adherence to defense logistics protocols for packaging and traceability. No set-aside type is specified, indicating it is open to eligible subcontractors without restriction based on business size or veteran status. Successful bidders must demonstrate capacity to produce, test, and package units in full compliance with military standards and deliver them on schedule to meet critical deployment timelines.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 24 hours ago

DEADLINE

Product Verification Testing CoordinationThe contract requires the preparation, marking, and shipment of Product Verification Test (PVT) samples in full compliance with Department of Defense standards, including proper segregation of materials and complete documentation to ensure traceability and regulatory adherence. All activities must be conducted under strict guidelines to meet the DoD’s quality and procedural requirements for verification testing. The effort is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, and falls under the NAICS code 541380 for other scientific and technical consulting services. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, and is managed by the ASC Commodities Division within the Department of Defense. Performance will occur at an unspecified location, and the award is expected to follow competitive procedures under the Federal Acquisition Regulation.

Testing Laboratories and Services

POSTED

about 24 hours ago

DEADLINE

Supply Chain & Logistics Compliance ManagementThe contract requires management of specific DLA logistics modules—C03, C07, C16, and C20—with a focus on maintaining adequate material buffers to prevent stockouts and ensure operational readiness. It mandates rigorous part number tracking to guarantee accurate inventory visibility and accountability across the supply chain, while ensuring full compliance with First Destination Transportation regulations to meet military shipment standards. All activities must align with strict logistical protocols to support timely and accurate delivery of critical components. This is a small business set-aside subcontract under NAICS code 488510, issued by the ASC Commodities Division within the Department of Defense, with a submission deadline of August 20, 2026. The solicitation is posted on the DIBBS system and is open only to small business concerns, emphasizing support for small business participation in defense logistics. While the place of performance and detailed point of contact information are not specified, successful bidders must be prepared to execute responsibilities across the Department of Defense’s logistics network without geographic limitation, ensuring all compliance requirements are met consistently and in real time.

Freight Transportation Arrangement

POSTED

about 24 hours ago

DEADLINE

Military-Compliant Labeling & BarcodingThe contract requires the application of permanent, MIL-STD-129-compliant labels and 2D barcodes to shipping containers used by the Department of Defense, ensuring full adherence to military standards for identification and tracking. Special markings must be included for test samples to distinguish them from standard shipments, with all labeling required to be durable and legible under operational conditions. This is a small business set-aside subcontract under NAICS code 323111, exclusively open to small businesses, and is managed by the ASC Commodities Division. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, and performance is expected to support DoD logistics operations without specified geographic limitations, though exact location details are not provided.

Commercial Printing (except Screen and Books)

POSTED

about 24 hours ago

DEADLINE

Military Packaging & Preservation ServicesThe contract requires the provision of military-grade packaging and preservation services for adjustable clevises in full compliance with MIL-STD-2073-1E standards, ensuring that all items are properly cleaned, dried, and protected against corrosion and environmental damage during storage and transit. The packaging must include stretch wrap containerization as the specified method for securing and stabilizing the items within shipping containers, maintaining integrity and preventing movement during handling. All work must adhere to strict defense logistics protocols to guarantee readiness and operational reliability. This is a small business set-aside subcontract under the SBA Total Small Business Set-Aside category, designated under NAICS code 493190, and issued by the Department of Defense’s ASC Commodities Division. Interested parties must submit proposals by the deadline of August 20, 2026, with performance expected to meet exacting military specifications and timelines. The contract emphasizes quality control, regulatory compliance, and the use of approved preservation and packaging techniques to support the Department of Defense’s supply chain requirements.

Other Warehousing and Storage

POSTED

about 24 hours ago

DEADLINE

Adjustable Clevis Manufacturing & SupplyThe contract calls for the manufacture and supply of adjustable clevises identified by NSN 5342-01-166-0578, to be produced in strict compliance with military specifications. This includes precision machining to exact dimensional and performance standards, along with proper packaging and marking requirements to ensure traceability and readiness for military use. The work must be performed by a small business as this is a Total Small Business Set-Aside under FAR 19.5, meaning only eligible small businesses may submit bids. The NAICS code 332710 applies, categorizing the work under Other Metal Forge and Stamp. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, giving interested parties approximately three weeks to prepare and submit proposals. The contracting activity is the ASC Commodities Division under the Department of Defense, and the place of performance and point of contact details are not specified in the provided data. Bidders must ensure complete adherence to military standards, packaging protocols, and marking regulations, and submissions must be made through the official DIBBS portal accessible via the provided link.

POSTED

about 24 hours ago

DEADLINE

Defense Logistics Agency (DLA) Compliance & Submission SupportThe contract seeks support services to ensure full compliance with Defense Logistics Agency procurement requirements, focusing on registration and operational adherence to systems such as SAM, AMPS, and VSM, along with timely submission of proposals via DIBBS. The work must align strictly with Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement standards, as well as all technical specifications mandated by DLA, to facilitate successful participation in defense supply chain activities. Performance is required at the specified location in New Cumberland, Pennsylvania, with a deadline for responses set for August 5, 2026, and the solicitation issued under the NAICS code 541611 for management consulting services. This subcontract opportunity is managed by the ASC Commodities Division of the Department of Defense and requires proposers to demonstrate proven capability in navigating complex federal procurement compliance frameworks, ensuring accurate documentation, system registrations, and proposal submissions to meet DLA’s stringent operational and regulatory expectations.

Administrative Management and General Management Consulting Services

POSTED

about 24 hours ago

DEADLINE

Packaging, Marking & Labeling ServicesThe contract requires the provision of packaging, marking, and labeling services fully compliant with MIL-STD-129 standards for military shipment and storage, including the application of data matrix codes and proper container marking to ensure accurate tracking and handling throughout the supply chain. All work must adhere strictly to Department of Defense specifications for barcoding and labeling to support seamless inventory management and logistical operations. The performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contract falls under NAICS code 561910 for other support activities for warehousing and storage. This is a subcontract opportunity issued by the ASC Commodities Division under the Department of Defense, with a response deadline of August 5, 2026, and the solicitation was posted on July 31, 2026.

Packaging and Labeling Services

POSTED

about 24 hours ago

DEADLINE

Quality Assurance & Inspection ServicesThe contract solicits third-party quality inspection and documentation services for military-grade tapping screws, ensuring full compliance with Defense Logistics Agency standards. Key responsibilities include sampling procedures, detailed test reporting, and systematic tracking of non-conformances to maintain stringent quality control throughout the supply chain. All activities must adhere to established Department of Defense protocols, with a focus on accuracy, traceability, and timely delivery of inspection results. Performance is required at New Cumberland, Pennsylvania, with a response deadline of August 5, 2026, and the contract type is classified as a subcontract under NAICS code 541330. The award will be managed by the ASC Commodities Division within the Department of Defense, and the contractor must be prepared to support military-grade manufacturing requirements with robust documentation and rigorous non-conformance resolution processes. The solicitation is publicly accessible via the DIBBS system, and interested parties must submit proposals before the stated deadline to be considered.

Engineering Services

POSTED

about 24 hours ago

DEADLINE