Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Hardware Supply – Loop Clamp (NSN: 5340-01-007-7286)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Defense Logistics Agency under the Department of Defense, requires the supply of 27 military-spec loop clamps, part number 160D955408-15 and NSN 5340-01-007-7286. The procurement falls under NAICS code 332510 and mandates strict adherence to quality and logistics standards. The contractor must ensure full traceability for all units and perform a 100 percent inspection to verify compliance. Additionally, all deliverables must meet MIL-STD-129 requirements and follow specified packaging standards to ensure the integrity and standardization of the hardware.

General Info

DLA subcontract for 27 military-spec loop clamps requiring full traceability and 100% inspection.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

332510 - Hardware Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-04F2.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CLAMP, LOOP

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 1

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 27 units of a military-spec loop clamp (P/N: 160D955408-15) with full traceability, 100% inspection, and compliance to MIL-STD-129 and packaging standards.

Similar Contracts

Same NAICS industry code

Supply of Spring Tension WashersThis subcontract involves the manufacture or sourcing of 2,431 spring tension washers for the Department of Defense, specifically supporting the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for ensuring all units meet strict government specifications and must prepare the items for Government-Arranged Transportation under the First Destination Transportation program. Performance will take place at Hill AFB. Interested parties must be registered in SAM.gov to be eligible for this requirement. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026. The contract falls under NAICS code 332510 and requires the delivery of all units by the specified required delivery date.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

Manufacturing and Supply of Spacer, Sleeve (NSN 5365010716787)This subcontract involves the manufacture and supply of 6,250 units of Spacer, Sleeve (NSN 5365010716787) for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. All parts must be produced in accordance with the DLA Master List of Technical and Quality Requirements and delivered FOB Origin from New Cumberland. The contractor is required to strictly adhere to the Buy American Act and the Berry Amendment. Additionally, all packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and PPP-H-1581 standards. The project falls under NAICS code 332510.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

Manufacture and Supply of Access Covers (NSN 5340-01-362-5961)This subcontract involves the manufacture and supply of 37 Access Covers, identified by NSN 5340-01-362-5961, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider must fabricate the covers according to the provided technical data package, with a strict requirement that no hexavalent chromium or Class I Ozone Depleting Substances are utilized during production. All hardware must be packaged and labeled in accordance with ASTM D3951 and MIL-STD-129 standards before being delivered to DLA Distribution San Joaquin in Tracy, California. The project falls under NAICS code 332510 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

Mounting Bracket Supply (NSN 5340016531699)This subcontract involves the manufacture or sourcing of mounting brackets under NSN 5340016531699 for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider must ensure all items meet specific technical and quality requirements and are packaged according to ASTM D3951 standards. Performance will take place in Fort Stewart, with delivery coordinated under FOB Origin terms for Government-Arranged Transportation. Eligible candidates must maintain active SAM registration and hold Small Business status. The contract falls under NAICS code 332510, with a response deadline set for November 9, 2026. The primary responsibility of the subcontractor is the delivery of physical mounting brackets to the designated origin point.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

Trailer Components and Hardware SupplyThis subcontract for Trailer Components and Hardware Supply involves providing raw materials, axles, wheels, and specialized hardware to prime contractors for DLA Troop Support equipment projects. The scope of work includes sourcing industrial-grade trailer components and ensuring all materials comply with Buy American Act domestic origin requirements. Additionally, the supplier is responsible for providing Safety Data Sheets for hazardous materials in accordance with Federal Standard No. 313, delivering items as either bulk materials or component kits to the prime manufacturer. Managed under the Department of Defense for Construction & Equipment Manu & Con, the contract is categorized under NAICS code 332510. The place of performance is located at Hill AFB, zip code 84056-5734. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

Manufacturer of Grooved Pins (NSN 5315-00-957-7700)

Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

Manufacturer of Solid Rivets (NAS1200-6-9)This subcontract involves the manufacture of 1,088 solid rivets for prime contractors delivering to the DLA Weapons Support ASC Commodities Division. The rivets must be fabricated according to part standard NAS1200-6-9 and NSN 5320009277976. Production must utilize traditional manufacturing processes, as additive manufacturing is strictly prohibited. The selected provider must possess precision machining equipment and maintain a quality management system that complies with either SAE AS9003 or ISO 9001 standards. Performance for this Department of Defense contract will take place at Robins Air Force Base. The response deadline for this opportunity is November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Supplier of Security Rings (NSN 3615-01-447-0047)This subcontract involves the manufacture or sourcing of 10 security rings under NSN 3615-01-447-0047 to support prime contractors delivering DLA Troop Support supply contracts. The selected provider must ensure all units strictly adhere to the technical specifications associated with the identified national stock number and deliver the items FOB Origin. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332510 for the Department of Defense. Performance will take place in San Diego, California, with a response deadline set for November 9, 2026.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 2 hours ago

DEADLINE

Utility Access Door SupplierThis subcontract opportunity is for a supplier to fabricate or procure new and unused utility access doors, specifically the PWP MOD 1 CMU Improved Door under NSN 5340-01-663-5150. The selected provider will support prime contractors fulfilling DLA supply contracts for the Department of Defense, specifically the DLA Weapons Support Land Supply Chain. Key requirements include supporting the Contractor First Article Test in accordance with FAR 52.209-3 and adhering to Section 889 telecommunications disclosures. The project is designated as a Total Small Business Set-Aside under NAICS code 332510. Interested parties must submit their responses by November 28, 2026, for performance located in zip code 17070-5002.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in about 1 month

Specialized End-Fittings and Hardware SupplyThis HUBZone set-aside subcontract, titled Specialized End-Fittings and Hardware Supply, involves the production and delivery of metal end-fittings, shackles, and connectors for prime contractors supporting DLA Troop Support. The scope of work requires the forging or machining of hardware to specific TDP dimensions, the application of protective coatings, and the provision of material certifications for all load-bearing components to ensure compliance with Berry Amendment domestic origin requirements. Managed by the Department of Defense under NAICS code 332510, the contract is being handled by Construction & Equipment Manu & Con. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, to provide the necessary certified metal hardware.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

Supply of Hinged Hasps (NSN 5340015355203)This subcontract involves the supply of six hinged hasps, identified by NSN 5340015355203 and Part Number 106A0345 from Mil-Mar Century Corporation, to support prime contractors delivering for the DLA Weapons Support Land Supply Chain. The contract requires strict adherence to the Buy American Act and specifies that delivery be made FOB Origin, with the place of performance located at Fort Drum. All items must be packaged and marked in accordance with ASTM D3951 and MIL-STD-129, while palletization must comply with RP001 DLA requirements. The procurement falls under NAICS code 332510 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

Supply of Self-Locking Nuts (NSN 5310-01-077-9848)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Domestic Electrical Component Supply (Berry Amendment Compliant)

Residential Electric Lighting Fixture Manufacturing

POSTED

about 2 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly Fabrication

Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

Supplier of Flat Washers (NSN 5310-01-097-9936)This subcontract involves the procurement of 109 specialized flat washers to support Defense Logistics Agency aircraft component projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with Sikorsky Aircraft Corporation part number SS5104-01 and NSN 5310-01-097-9936. All items must be delivered to DLA Distribution DDSP New Cumberland. The contract mandates rigorous adherence to quality and regulatory standards, including compliance with the Buy American Act and the Berry Amendment. Packaging must meet ASTM D3951 specifications, while marking and palletization must follow MIL-STD-129 and RP001 guidelines. The opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

Military-Spec Packaging and International Shipping (Guam)

Navigational Services to Shipping

POSTED

about 2 hours ago

DEADLINE

Exhaust Muffler Supply (NSN 2990-01-566-4579)

Other Motor Vehicle Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

Supply of Enamel (NSN 8010-00-297-0554)This subcontract involves the supply of 5,000 gallons of enamel paint to prime contractors supporting Defense Logistics Agency Troop Support contracts. The material must strictly adhere to NSN 8010002970554 and UFGS-09900 Division 09 specifications, while remaining compliant with the DLA Master List of Technical and Quality Requirements. Delivery is designated as FOB Destination, with the place of performance located at Hunter AAF. The contractor is responsible for ensuring all packaging and labeling meet MIL-STD-129 and MIL-STD-2073-1E standards, specifically including the provision of lot and batch numbers. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. The response deadline for this requirement is November 3, 2026.

Paint and Coating Manufacturing

POSTED

about 2 hours ago

DEADLINE

Mold Release Agent Supplier (NSN 8030-01-233-1265)This subcontract involves the supply of a specific mold release agent, identified by NSN 8030-01-233-1265, to support prime contractors fulfilling Defense Logistics Agency requirements. The supplier must provide one 5-gallon can delivered FOB Destination to Illinois and US APO AE. To ensure product integrity, the agent must maintain a 12-month shelf life and be stored at temperatures between 60 and 80 degrees Fahrenheit. The contractor is required to adhere to strict regulatory and military standards, including compliance with the Buy American Act, the Berry Amendment, and 29 CFR 1910.1200. Additionally, all shipments must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129. This procurement falls under NAICS code 325998 and is managed through the Department of Defense.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 2 hours ago

DEADLINE

Supply of Refractory Castable Mix (NSN 9350015694317)This subcontract involves the supply of refractory castable mix to prime contractors supporting Defense Logistics Agency contracts for the USS George H W Bush and USS Abraham Lincoln. The provider is responsible for manufacturing or sourcing material that meets NSN 9350015694317, with strict requirements for packaging according to MIL-STD-2073-1E and marking per MIL-STD-129. The agreement mandates full compliance with the Buy American Act and the Hazard Communication Standard. The scope of work requires the delivery of two units of castable mix on a FOB Destination basis. This procurement falls under NAICS code 327120 and is managed through the Department of Defense. Interested parties must adhere to the response deadline of November 9, 2026.

Clay Building Material and Refractories Manufacturing

POSTED

about 2 hours ago

DEADLINE

Supply of Incandescent Lamps (NSN 6240-01-563-9037)This subcontract through the Defense Logistics Agency involves the supply of 220 specialized incandescent lamps, specifically part number M6363/9-2 under NSN 6240-01-563-9037. The contractor is responsible for manufacturing or sourcing lamps that strictly adhere to MIL-DTL-6363J Revision J and MIL-DTL-6363/9A Revision A standards. All deliverables must meet rigorous quality assurance protocols per MIL-STD-1916 or ASQ H1331, with marking requirements following MIL-STD-129 and packaging compliant with RP001 and ASTM D3951. The project is subject to strict regulatory requirements, including mandatory compliance with the Berry Amendment and the Buy American Act. Performance for this contract is centered in Phoenix, Arizona, under NAICS code 334519. Interested parties must submit responses by November 9, 2026, to support prime contractors on DLA Troop Support projects.

Other Measuring and Controlling Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

FOB Destination Delivery Services (Patuxent River, MD)This subcontract involves the secure transport and delivery of specialized vehicular tires for prime contractors supporting Defense Logistics Agency supply contracts. The services are dedicated to the Naval Air Warfare Center Air Division, with all deliveries destined for a military installation in Patuxent River, Maryland. All shipments must be delivered FOB Destination within 20 days of receiving an order. To ensure successful execution, the contractor must provide drivers who possess the necessary valid identification and security clearances required for base access. This requirement falls under NAICS code 484220, with a response deadline set for November 9, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 2 hours ago

DEADLINE

Supply of Specialized Pneumatic Vehicular Tire (NSN 2610016070189)This subcontract involves the supply of specialized pneumatic vehicular tires, specifically NSN 2610016070189, for prime contractors working under Defense Logistics Agency contracts. The selected provider must manufacture or source tires that strictly adhere to MIL-DTL-4 specifications, ensuring a total non-extendable shelf life of 72 months. All items must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129, with final delivery completed FOB Destination to Patuxent River. Compliance requirements include strict adherence to the Berry Amendment and a total prohibition on the use of Class I ozone-depleting chemicals. The opportunity is categorized under NAICS code 326211 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026.

Tire Manufacturing (except Retreading)

POSTED

about 2 hours ago

DEADLINE

Compressed Gas Regulator SupplierThis subcontract opportunity with the Defense Logistics Agency requires the procurement or manufacture of one Compressed Gas Regulator matching NSN 4820010239625. The selected supplier must ensure that the unit is packaged in accordance with ASTM D3951 and the DLA Master List of Technical and Quality Requirements. Eligible bidders must possess a valid UEI and CAGE code to participate. The solicitation was posted on October 28, 2026, and requires a response by November 9, 2026. This requirement falls under NAICS code 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 2 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Supply of Hatch Handles (Commercial Off-the-Shelf Item)

Defense Logistics Agency

POSTED

DEADLINE

Supply of Loop Clamp (NSN 5340012740115)

Defense Logistics Agency

POSTED

DEADLINE

Supplier for Access Cover (NSN 5340-01-357-8402)

Defense Logistics Agency

POSTED

DEADLINE

LATCH ASSEMBLY, NACE – Precision Hardware Manufacturing

Defense Logistics Agency

POSTED

DEADLINE

Supply of Access Covers (NSN: 5340-01-323-9235)

Defense Logistics Agency

POSTED

CLOSED

Precision Hardware Manufacturing – Butt Hinge (NSN 5340-01-714-7007)

Defense Logistics Agency

POSTED

DEADLINE

Manufacture and Supply of Angle Brackets (NSN: 5340-01-317-3408)

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

CLOSED

Precision Loop Clamp Manufacturing & Supply

Defense Logistics Agency

POSTED

DEADLINE

Precision Metal Fabrication of Vehicular Bracket

Defense Logistics Agency

POSTED

DEADLINE

Supply of Grooved Ferrule Hardware (NSN 5340-01-700-8423)

Defense Logistics Agency

POSTED

DEADLINE

Precision Machining and Fabrication of Mounting Bracket

Defense Logistics Agency

POSTED

DEADLINE

Supply of Double Angle Bracket (NSN: 5340015679445)

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS