Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Helical Spring Fabrication (NIIN 016433343)

Active

Federal

Response Deadline11/16/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication of a high-reliability helical spring, identified by NIIN 016433343, for the Department of Defense under the Navsup Weapon Systems Support Mech agency. The selected manufacturer must produce the spring according to Carleton Technologies drawing 3423-2001, utilizing precision winding and heat-treating equipment. Key technical requirements include the application of permanent traceability markings in accordance with MIL-STD-792 and a strict mandate for mercury-free production. Eligible contractors must hold ISO-9001 or MIL-I-45208 certification and maintain a favorable Supplier Performance Risk System record. The final deliverable consists of one helical spring accompanied by the necessary certification data. The solicitation was posted on October 16, 2026, with a response deadline of November 16, 2026.

General Info

Fabricate one mercury-free helical spring for DoD per drawing 3423-2001 and ISO-9001 standards.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

332613 - Spring Manufacturing

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010426QFF78.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

53--HELICAL SPRING

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 16

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 08:30:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures high-reliability helical springs for prime contractors on NAVSUP Weapon Systems Support projects. Fabricates springs to Carleton Technologies drawing 3423-2001 using precision winding and heat-treating equipment. Applies permanent traceability markings per MIL-STD-792 and ensures mercury-free production. Requires ISO-9001 or MIL-I-45208 certification and favorable SPRS record. Delivers one helical spring with certification data.

Similar Contracts

Same NAICS industry code

53--HELICAL SPRING

Solicitation # N0010426QFF78

This fixed-price solicitation, number N00104-26-Q-FF78, is issued by the NAVSUP Weapon Systems Support Mechanicsburg for the procurement of a helical spring (NIIN 016433343) manufactured according to Carleton Technologies drawing 3423-2001. The material is designated as Special Emphasis material due to its use in crucial shipboard systems, where failure could result in serious personnel injury or loss of the ship. Consequently, the contract mandates strict quality assurance, including a one-year warranty, adherence to ISO-9001 or MIL-I-45208 quality systems, and the submission of a Certificate of Compliance and objective quality evidence. The delivery schedule requires final delivery within 210 days, with all certification data submitted 20 days prior to delivery for a six-day review period by the Portsmouth Naval Shipyard. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation will include risk assessments via the DoD Supplier Performance Risk System (SPRS) regarding item, price, and supplier risk. Key requirements include a mercury-free mandate, strict configuration control via Engineering Change Proposals, and permanent traceability markings per MIL-STD-792. Shipping is FOB Destination with packaging requirements adhering to ASTM D3951-18 for CONUS and MIL-STD-2073-1 for OCONUS shipments. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. The offer deadline has been extended to 4:30 PM EST on November 16, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Supplier of Dynamic Microphones (NSN 5965-01-621-7077)This subcontract involves the procurement and delivery of four dynamic microphones, specifically Avon Protection Systems part number 71601/13, for the DLA Weapons Support Active Devices Division. The hardware must be delivered FOB Origin to Spanish Fork, Utah, and must strictly adhere to MIL-STD-2073-1E, RP001, and MIL-STD-129 standards for packaging and marking. The contract requires full compliance with the Berry Amendment and DFARS 252.225-7001. Classified under NAICS code 332613, the opportunity was posted on October 15, 2026, with a response deadline of October 26, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Helical Compression Spring Supplier (NSN 5360015039972)This subcontract involves the supply of one helical compression spring for prime contractors supporting the Department of Defense under the DLA Weapons Support Land Supplier Opns Vehicle Spt project. The supplier is responsible for manufacturing or sourcing the component in strict accordance with NSN 5360015039972 and the DLA Master List of Technical and Quality Requirements. To ensure compliance, all spring winding machinery and materials used must adhere to the Buy American Act and the Berry Amendment. The project falls under NAICS code 332613, with a response deadline set for October 26, 2026, and performance located at FPO 09573.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Manufacturing of Helical Compression Spring (NSN 5360-01-110-7840)This subcontract involves the manufacturing of helical compression springs under NSN 5360-01-110-7840 for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work requires the fabrication of springs using specialized winding machinery and strictly mandates the use of domestic materials in compliance with the Berry Amendment. The contractor must adhere to the DLA Master List of Technical and Quality Requirements and DLA Directive Procurement Note C03 to ensure full traceability. Final deliverables include the completed springs along with all necessary quality documentation. Performance for this project is based in Albany, Georgia, under NAICS code 332613.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Helical Compression Springs (NSN 5360-01-335-3340)This subcontract involves the manufacture or procurement of 2,000 helical compression springs for the DLA Weapons Support Land Supply Chain. The required components must match Parker-Hannifin part number 036-21021 and National Stock Number 5360-01-335-3340. All items are to be delivered FOB Destination to the USS Curtis Wilbur (DDG 54). The contractor must ensure strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging standards. Additionally, the agreement mandates compliance with DFARS 252.204-7012 and requires a Source Approval Request. The project falls under NAICS code 332613 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Helical Compression Spring Manufacturer/SupplierThis subcontract involves the manufacture and supply of 15 helical compression springs, specifically part number 2192-0075-1, to support DLA Land and Maritime supply contracts. The production process must adhere to the DLA Master List of Technical and Quality Requirements, utilizing precision winding and heat-treating equipment to meet critical application tolerances. All deliverables must be packaged according to MIL-STD-129 and RP001 standards. The contract is issued by the Department of Defense under the Land Supply Chain agency, with performance taking place in Phoenix, Arizona. A critical requirement for the supplier is maintaining DFARS 252.204-7012 cybersecurity compliance. The opportunity was posted on October 15, 2026, with a response deadline of October 20, 2026, falling under NAICS code 332613.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing of Tie-Down Springs (NSN 1560006284729)This subcontract involves the manufacture of 39 Tie-Down Springs (NSN 1560006284729) for prime contractors supporting the Department of Defense DLA Weapons Support ASC. The production process requires specialized winding or forming tooling, with the possibility of casting or forging, to deliver finished units to Hill AFB. All components must be marked according to MIL-STD-130 and undergo inspection using zero-based sampling plans per MIL-STD-1916 or ASQ H1331. To be eligible, the provider must maintain ISO 9001:2015 certification and CMMC Level 2 compliance, while ensuring all materials and processes adhere to the Buy American Act. The project falls under NAICS code 332613 and requires the delivery of 39 fully inspected and marked springs.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Flat Spring Supply (NSN 5360015249957)This subcontract involves the manufacture or procurement of 14 flat springs under NSN 5360015249957 for prime contractors supporting the DLA Weapons Support ASC Supplier OEM Division. The contractor must ensure all units adhere to the DLA Master List technical requirements, with specific mandates for bare item marking per RQ017 and packaging standards according to MIL-STD-2073-1E and MIL-STD-129. Delivery of the packaged springs is required FOB Origin. Compliance requirements for this project include a CMMC Level 2 self-assessment and strict adherence to the Buy American Act and the Berry Amendment. The work is categorized under NAICS code 332613 and will be performed in Greensboro, North Carolina. Interested parties must respond by October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacturing of Helical Compression Springs (NSN 5360012204143)This subcontract involves the manufacture and supply of helical compression springs for the DLA Weapons Support Land Supply Chain. The contractor is responsible for fabricating part number 2192-0098-1 in accordance with NSN 5360012204143 and the DLA Master List of Technical and Quality Requirements. The project requires the use of spring winding machinery and materials that are fully compliant with the Berry Amendment. The final deliverable consists of six finished springs accompanied by comprehensive supply chain traceability documentation as mandated by DLA Directive C03. Performance for this contract is located in Phoenix, Arizona, under NAICS code 332613. Responses to the solicitation are due by October 26, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Helical Compression Spring ManufacturerThis subcontract involves the manufacture of 64 helical compression springs for the DLA Weapons Support Maritime Supply Chain. The components must strictly adhere to NSN 5360011805213 and Part Number 24487 specifications from Triumph Engine Control Systems LLC. Due to the critical nature of the application, the manufacturer is required to follow the DLA Master List of Technical and Quality Requirements RA001 and utilize precision winding machinery and load verification equipment. The project is managed under NAICS code 332613 for the Department of Defense, with the place of performance located in Phoenix, Arizona. Interested parties must respond by October 26, 2026, to provide the finished springs as specified in the technical requirements.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Helical Compression Spring FabricationThis subcontract involves the fabrication of seven helical compression springs for prime contractors supporting the DLA Weapons Support Land Supply Chain. The manufacturer is required to produce the springs according to NSN 5360-00-135-7854 and must adhere to quality requirements RA001 and RQ006 using precision winding and coiling machinery. The place of performance for this project is located in Phoenix, Arizona. The contractor must maintain strict compliance with the Buy American Act, Berry Amendment, ITAR, EAR, and DFARS 252.204-7012 regulations. Notably, the use of additive manufacturing is strictly prohibited for this project. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

First Article Test (FAT) ProductionThis subcontract involves the production of first article test units for the DLA Weapons Support Land Supply Chain. The selected contractor is responsible for fabricating two units of NSN 5360-01-294-5241 and coordinating their delivery to the Warner Robins ALCMC at Robins AFB, Georgia. Deliverables include the two first article units along with all associated FAT certification exhibits. The project requires strict compliance with FAR 52.209-3 or 52.209-4 and falls under NAICS code 332613. While the delivery destination is in Georgia, the place of performance is listed as Hill AFB. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

Metallurgical and Mechanical Testing for Special Emphasis FastenersThis subcontract for the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves providing metallurgical and mechanical testing for special emphasis fasteners. The selected contractor will perform quantitative chemical and mechanical analysis, including thread verification per FED-STD-H28, production lot destructive testing, and Liquid Penetrant or Magnetic Particle inspections. The primary objective is to support prime contractors on shipboard projects through the delivery of detailed test reports and certifications for every heat or lot processed. To qualify for this engagement, contractors must maintain rigorous quality standards, including ISO/IEC 17025, ISO 10012, and ANSI/NCSL Z540.3 certifications. The opportunity falls under NAICS code 541380. Interested parties must submit their responses by the deadline of November 5, 2026.

Testing Laboratories and Services

POSTED

about 20 hours ago

DEADLINE

Manufacturing of Special Emphasis Heavy Hex NutsThis subcontract involves the manufacturing of high-criticality Heavy Hex Nuts for prime contractors supporting NAVSUP Weapon Systems Support shipboard projects. The scope of work requires the fabrication of nuts according to Leslie Controls drawings 38650N, 36938N, and 38980N, utilizing either ASTM-A194 Grade 2H or Grade 7 steel. Deliverables include the finished hardware accompanied by Certificates of Compliance. Strict quality and technical standards must be maintained, including thread inspection per FED-STD-H28 and packaging in accordance with MIL-STD-2073. The performing entity must maintain an ISO 9001 quality system and ensure compliance with ANSI/ASQ Z1.4. This opportunity is categorized under NAICS code 332722 for the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 20 hours ago

DEADLINE

MIL-STD-2073 Packaging and Marking ServicesThis subcontract involves providing specialized preservation, packaging, and marking services for prime contractors supporting Navsup Weapon Systems Support Mech shipboard projects. The scope of work requires strict adherence to MIL-STD-2073 packaging standards and the application of Item Unique Identification markings using laser etchers or equivalent equipment to ensure the durability of Special Emphasis material. The selected provider is responsible for delivering all finished products fully packaged and marked for FOB Destination shipment. This opportunity falls under NAICS code 561910 and is managed by the Department of Defense. Interested parties must submit their responses by November 2, 2026.

Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

Production Lot Destructive Testing for Shipboard NutsThis subcontract involves performing destructive testing on production lots of shipboard nuts for prime contractors supporting Navsup Weapon Systems Support Mech projects. The scope of work focuses on material integrity validation for Special Emphasis Level I hardware, utilizing tensile, hardness, or shear testing in strict accordance with the Technical Data Package. The selected provider must maintain ISO/IEC 17025 laboratory accreditation to ensure testing standards are met. Key deliverables include the submission of formal test reports and the final certification regarding the acceptance or rejection of each production lot. This opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense.

Testing Laboratories and Services

POSTED

about 20 hours ago

DEADLINE

Manufacture of Special Emphasis Plain Round Nuts (NIIN 013397780 & 013397781)This subcontract involves the manufacture of high-precision plain round nuts, specifically NIIN 013397780 and 013397781, for prime contractors supporting Navsup Weapon Systems Support Mech shipboard projects. The contractor is required to fabricate the components according to NAVSEA Drawing 6602371 and TDP Version 003, while adhering to FED-STD-H28 for thread inspection and MIL-DTL-24252 to ensure zero weld repairs. Eligible providers must possess precision machining equipment and hold either ISO-9001 or MIL-I-45208 certification. Final deliverables must include the finished nuts accompanied by comprehensive certification data and DD Form 1423. The response deadline for this opportunity is November 2, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 20 hours ago

DEADLINE

Manufacture of Specialized Check Valves (VALVE, CHK SPCL42X46)This subcontract involves the manufacture of 10 specialized check valves, specifically model VALVE, CHK SPCL42X46 with NIIN 016665954, for prime contractors supporting Navsup Weapon Systems Support Mech. The fabrication process must strictly adhere to Cage Code IM994 and reference 2648038, utilizing precision machining equipment to ensure technical specifications are met. The contractor is responsible for full compliance with several military standards, including MIL-STD-130 REV N for marking and MIL-STD-2073 and MIL-STD-129 for packaging. Additionally, the project requires adherence to DFARS 252.204-7012 regulations. All units must be fully marked and inspected prior to delivery.

Industrial Valve Manufacturing

POSTED

about 20 hours ago

DEADLINE

Destructive Testing for Naval Electrical ComponentsThis subcontract for the Department of Defense involves performing destructive First Article Testing for prime contractors on Navsup Weapon Systems Support Mech shipboard projects. The selected provider will execute government-mandated testing to failure using electrical overload, compression, and tension equipment to ensure structural and electrical integrity in accordance with TDP O04 specifications. The contractor must hold the necessary laboratory accreditation for military-grade destructive testing and is responsible for delivering a certified Test Report for government approval. This opportunity falls under NAICS code 541380, with a response deadline set for October 30, 2026.

Testing Laboratories and Services

POSTED

about 20 hours ago

DEADLINE

Manufacture of MIL-SPEC Electrical Plug ConnectorsThis subcontract involves the manufacture of high-reliability electrical plug connectors for prime contractors supporting Navsup Weapon Systems Support Mech shipboard projects. The contractor is responsible for fabricating connectors with NIIN 010463755, adhering strictly to TDP Version O04 and MIL-DTL-24231 specifications. Production requires the use of precision machining and molding equipment, and the contractor must maintain Special Emphasis Level I capability. All finished products must comply with MIL-STD-2073 packaging standards and be delivered FOB Destination to the Portsmouth Naval Shipyard. This Department of Defense requirement falls under NAICS code 335931, with a response deadline set for October 30, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 20 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on NAVSUP Weapon Systems Support projects for the Department of Defense. The scope of work involves performing specialized military packaging and marking, specifically applying markings according to MIL-STD-129, implementing Item Unique Identification per MIL-STD-130, and packaging items in accordance with MIL-STD-2073. All tasks must be completed using approved IUID marking equipment and MIL-SPEC materials, with finished products delivered as FOB Destination. The opportunity is categorized under NAICS code 488410 and was posted on October 16, 2026. Interested parties must submit their responses by the deadline of November 13, 2026.

Motor Vehicle Towing

POSTED

about 20 hours ago

DEADLINE

Supply of Mercury-Free Electrical Components and Raw MaterialsThis subcontract involves the supply of mercury-free raw materials, connectors, and wiring to prime contractors supporting NAVSUP Weapon Systems Support projects for the Department of Defense. The scope focuses on providing electrical components that strictly adhere to toxicity and corrosion requirements specifically designed for the demanding environments of surface ships and submarines. A critical requirement of the contract is the provision of Material Certifications and Certificates of Conformance to verify the complete absence of mercury in all delivered goods. The opportunity is categorized under NAICS code 335931, with a response deadline set for November 13, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 20 hours ago

DEADLINE

Manufacture of CBL ACTR/LOCK PWR (NSN 6150-01-685-9963)This subcontract involves the manufacture of CBL ACTR/LOCK PWR assemblies, identified by NSN 6150-01-685-9963, for prime contractors supporting the Department of Defense Navsup Weapon Systems Support Mech. The selected vendor is responsible for fabricating cable assemblies according to drawing 8630048-1, ensuring all finished products are properly identified, packaged, and delivered. Strict compliance with technical and quality standards is required, including configuration control per MIL-STD-973 and marking per MIL-STD-129. Eligible vendors must hold ISO 9001 and PRO-020 certifications and guarantee the use of mercury-free materials. The response deadline for this opportunity is November 13, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 20 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the Department of Defense through the Navsup Weapon Systems Support Mech agency. The scope of work involves the preservation, packaging, and marking of finished subassemblies for prime contractors. All deliverables must be shipping-ready containers that strictly adhere to Navy standards, specifically utilizing MIL-SPEC materials and industrial marking equipment. Technical execution requires strict compliance with MIL-STD-2073 for packaging and MIL-STD-129 for marking, with a specific requirement for LEVEL 1 red markings. The opportunity is categorized under NAICS code 488510, with a response deadline set for November 13, 2026.

Freight Transportation Arrangement

POSTED

about 20 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS