Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Lock Washer Manufacturing

Active

Federal

Response Deadline08/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the manufacture of lock washers designated as MS35333-76, adhering strictly to the technical specifications outlined in ASME B18.21.1 and NASM35333 standards. The work encompasses the full production cycle including material sourcing, stamping, heat treatment, and comprehensive quality inspection to ensure compliance with military-grade requirements. All components must meet stringent dimensional, mechanical, and material integrity criteria to guarantee performance under demanding operational conditions. This is a subcontract issued under a Total Small Business Set-Aside as defined by the SBA and FAR 19.5, with the NAICS code 332721 indicating it falls under the forged and stamped metal product manufacturing category. The solicitation was posted on August 4, 2026, with responses due by August 19, 2026, and is managed by the Department of Defense through the Maritime Supply Chain organization. The place of performance and point of contact details are not specified, but the official solicitation can be accessed via the DIBBS portal using the provided link.

General Info

Manufacture MS35333-76 lock washers per ASME B18.21.1 and NASM35333 standards for DoD under small business set-aside.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

332721 - Precision Turned Product ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 19

Submission deadline

Response Deadline

08/19/2026, 05:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of lock washers (MS35333-76) per ASME B18.21.1 and NASM35333 standards, including material sourcing, stamping, heat treatment, and quality inspection.

Similar Contracts

Same NAICS industry code

Supply of Wiper Ring (NSN: 5330017297530)The contract calls for the procurement and delivery of six precision machined wiper rings identified by NSN 5330017297530, to be supplied as a commercial off-the-shelf item. All units must meet military standards for marking, packaging, and hazardous materials labeling to ensure compatibility and safety in defense logistics systems. The items are intended for use by the Department of Defense through the Land Supplier Operations Vehicle Support organization, with performance required at the designated location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation is structured as a subcontract under NAICS code 332721, which pertains to forging and stamping operations, indicating the manufacturing process involved. The opportunity was posted on August 5, 2026, with responses due by August 17, 2026, and is accessible via the DIBBS platform for qualified suppliers to submit proposals.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

Precision Machine Screw SupplyThe contract calls for the supply of one precision machine screw designated by NSN 5305015077486 and part number 6392799, manufactured to meet Raytheon specifications and applicable MIL-SPEC standards for integration into a defense end item identified by NSN 2355-01-494-7606. The screw must comply with rigorous military quality and performance benchmarks to ensure reliability in critical defense applications. The solicitation is structured as a subcontract under NAICS code 332721, targeting specialized manufacturing capabilities in fastener production. Performance is required at Camp Lejeune, North Carolina, with a response deadline of August 17, 2026, and the opportunity was posted on August 5, 2026. The contracting entity is the Electrical Devices Division within the Department of Defense, and detailed information can be accessed via the provided DIBBS link.

ELECTRICAL DEVICES DIV

POSTED

about 8 hours ago

DEADLINE

Precision Machined Component Supply – End Plate (NSN 6605006334227)Five precision-engineered end plates, identified by NSN 6605006334227, are to be manufactured and delivered in strict accordance with the military technical data package TDP Rev A Gen 1, ensuring full compliance with MIL-STD-129 for labeling and MIL-STD-1916 for statistical process control. The components must be produced under the NAICS code 332721 and delivered to Tinker AFB, Oklahoma, with a final delivery deadline aligned with the contract’s response deadline of August 13, 2026. This subcontract opportunity, issued under the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, requires adherence to all technical, quality, and documentation standards mandated by federal military specifications, with no set-aside designation applies. All submissions must be completed through the DIBBS portal by the stated deadline to be considered.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Precision Fastener Manufacturing – Self-Locking NutsThe contract requires the manufacture and delivery of 14 self-locking plate nuts with NSN 5310011261640 for use in critical defense applications, where reliability and precision are paramount. Each component must be produced under strict quality controls to ensure full traceability from raw material sourcing through final inspection, with comprehensive documentation provided to verify compliance with all technical and regulatory standards. Origin inspection requirements are mandatory, ensuring that all materials and manufacturing processes meet U.S. defense specifications and that the supply chain is free from restricted or foreign-sourced components. The work is to be performed under a subcontract agreement issued by the ASC Commodities Division of the Department of Defense, with performance located at New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026. The North American Industry Classification System code 332721 indicates the work falls under screw, nut, and bolt manufacturing. While no set-aside designation is specified, the nature of the items and their application necessitate adherence to stringent defense procurement protocols, including potential audits and certifications to confirm suitability for mission-critical systems.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

PLUG, MACHINE THREAD

Solicitation # SPE4A7-26-R-X997

This contract solicitation, identified by SPE4A7-26-R-X997, seeks bids for the supply of a PLUG, MACHINE THREAD with National Stock Number 5365-01-114-6444 and part number 281929, sourced exclusively from VALCOR ENGINEERING CORPORATION (CAGE 96487). The item is classified as a critical application component and must fully comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including special labeling as "Product Verification Test Samples - Do Not Post to Stock" alongside standard government markings. The contract is structured as an Indefinite Delivery Purchase Order (IDPO) with a five-year term or until aggregate orders reach $250,000, with a guaranteed minimum of eight units in the first base year and order quantities ranging between eight and thirty-two units per delivery order. Delivery is required within 132 days after contract award, with FOB destination terms applying to shipments destined for various CONUS stock locations. The government will conduct acceptance inspections at the manufacturer’s facility prior to shipment, adhering to FAR 52.246-11 and sampling protocols based on MIL-STD-1916, ASQ H1331, or zero-based plans, requiring zero non-conformances per lot. The contract incorporates a comprehensive suite of federal and defense acquisition regulatory clauses governing quality, labor, security, environmental compliance, and supply chain integrity. Key requirements include strict adherence to the Buy American Act, prohibitions on sourcing from the Xinjiang Uyghur Autonomous Region and restricted materials such as hexavalent chromium, tantalum, tungsten, and certain magnets, and mandatory compliance with DFARS cybersecurity controls including safeguarding covered defense information and reporting cyber incidents. Contractors must comply with labor and ethics mandates such as combating human trafficking, paid sick leave obligations, equal opportunity for veterans and workers with disabilities, and the prohibition of DEI-related discrimination. Antiterrorism training, whistleblower protections, and restrictions on compensation for former DOD officials are also enforced. All offerors must be registered in the System for Award Management (SAM), submit fully completed and signed proposals via DIBBS by August 12, 2026, and provide pricing for base and option years based on estimated annual demand. Alternative pricing is encouraged and may be used for award if determined to be

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-12UA

This contract specifies the procurement of 2,807 machine bolts with a metric thread size of M8x1.25x25.0 mm, manufactured from steel with a property class of 10.9 and a zinc surface finish, conforming to DIN EN 1665 Revision DTD 11/01/1998 and identified by part number EN1665-M8X1.25X25-10.9A2D and NSN 5306013308490. The product is classified as a critical application item and must comply with tailored higher-level quality requirements, inspection and acceptance at origin, and specific packaging standards per MIL-STD-2073-1E and MIL-STD-129. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contractor must also meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements and handle covered defense information in accordance with applicable directives. Delivery is FOB origin with a 200-day lead time, and the required delivery date is May 11, 2027, with a need ship date of July 14, 2026. The quantity variance is strictly zero percent, and no partial shipments are allowed. Packaging must follow DLA packaging requirements and be palletized as specified, with all markings compliant to MIL-STD-129 and no special marking codes applied. The shipment must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD procedural notes C19 and C20. The contract authorizes a Certificate of Conformance unless superseded by a Quality Assurance Letter of Instruction, and all technical and quality references are sourced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issuance or award date depending on acquisition size. The solicitation number is SPE4A6-26-T-12UA, issued by the ASC Commodities Division of the Department of Defense, with Jeremy Stokes as the primary point of contact.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Hit Sensor Clamp Assembly Supply

POSTED

DEADLINE

Precision Metal Seal Ring Manufacturing & Supply

LAND SUPPLY CHAIN

POSTED

DEADLINE

Flat Washer Manufacturing and SupplyThe contract involves the manufacture and supply of flat washers as a commercial item compliant with federal specifications, specifically requiring adherence to MIL-STD-129 for labeling and ASTM D3951 for packaging standards. The work is being performed under a subcontract arrangement with the Defense Logistics Agency, a component of the Department of Defense, and is classified under the NAICS code 332721, which pertains to screw, nail, and other fastener manufacturing. The solicitation was posted on August 4, 2026, and the performance location details are not specified, indicating the place of performance may be flexible or determined by the contractor. The contract does not include a specific set-aside designation or point of contact information, and the primary focus is on ensuring the product meets stringent military packaging and labeling requirements for federal procurement purposes.

Defense Logistics Agency

POSTED

DEADLINE

Hardware Kit Manufacturing and AssemblyThe contract entails the full production and assembly of the Hardware Kit, Mechanic Equipment identified by NSN 5340013139961, requiring end-to-end manufacturing capabilities including sourcing all necessary components, precise kitting, and rigorous quality assurance processes to meet military specifications. All work must be performed by a Service-Disabled Veteran-Owned Small Business, as the contract is set aside under the SDVOSBC program, ensuring priority consideration for businesses owned and operated by veterans with service-connected disabilities. The North American Industry Classification System code 332721 applies, indicating the work falls under the category of Other Fabricated Metal Product Manufacturing, and the responsible agency is the Strategic Acquisition Program Directorate under the Department of Defense. The solicitation was posted on August 4, 2026, with responses due by August 19, 2026, and the contract type is defined as a subcontract, indicating it will be awarded to a prime contractor’s subcontractor. The place of performance and point of contact details are unspecified, while the official solicitation can be accessed through the DIBBS portal.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Supply of Helical Compression Seat (NSN: 5340013015248)The contract calls for the supply of 47 units of a helical compression seat identified by NSN 5340013015248, with a specified place of performance at Robins Air Force Base, Georgia, 31098-1887. The solicitation was posted on August 4, 2026, and responses are due by August 7, 2026, indicating a tight turnaround for submission. It is classified as a subcontract under NAICS code 332721, which corresponds to other fabricated metal product manufacturing, suggesting the component is likely a precision mechanical part rather than a cybersecurity item. The contracting activity is listed under the Department of Defense, specifically the Maritime Supply Chain ESOC Buys office, although the nature of the item does not clearly align with typical maritime or cybersecurity procurement profiles. No point of contact or set-aside details are provided, and the solicitation link directs to a DLA Web RFQ system for further vendor action.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Filter Cap Supply (NSN: 1650LLFFXF347)

DLA FLEET READINESS CENTER SOUTHEAST

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

Government-Arranged Transportation (First Destination Transportation - FDT)The contractor is tasked with preparing and packaging an impeller for government-arranged sea transport under the Department of Defense’s First Destination Transportation program, ensuring full compliance with military logistics standards. This work requires precise handling and packaging procedures tailored to secure military transport requirements, with the impeller destined for delivery via sea under the supervision of the Maritime Supply Chain branch. The contract is structured as a subcontract under the NAICS code 488999, indicating it pertains to other support activities for transportation, and all activities must align with the stringent protocols enforced by the Department of Defense for defense-related cargo. The solicitation was posted on August 5, 2026, and responses are due by August 12, 2026, with no specific set-aside classification indicated. Although no organizational address or point of contact details are provided, the work must be performed in accordance with the specifications outlined by the DLA’s FDT program, and the contract is accessible via the DIBBS platform. The contractor must ensure all packaging, labeling, documentation, and readiness for sea transport meet the operational and security demands of military logistics, with no flexibility in adherence to established standards.

All Other Support Activities for Transportation

POSTED

about 8 hours ago

DEADLINE

Domestic Supply Chain Compliance and ReportingAll materials used in production must be sourced exclusively from U.S. or designated foreign countries to ensure compliance with FAR and DFARS regulations, with full documentation maintained to verify origin and traceability throughout the supply chain. The subcontract requires strict adherence to domestic sourcing requirements and demands rigorous recordkeeping to demonstrate adherence to federal procurement standards. This contract is issued by the Department of Defense through the Maritime Supply Chain office and is open for response until August 12, 2026, with materials classified under NAICS code 423840 related to wholesale trade of miscellaneous durable goods. Failure to provide accurate documentation or source non-compliant materials will result in nonconformance and potential contract termination.

Industrial Supplies Merchant Wholesalers

POSTED

about 8 hours ago

DEADLINE

Precision Machining of Centrifugal Pump ImpellerThe contract calls for the manufacture of two precision centrifugal pump impellers designed for critical applications requiring strict compliance with military or industrial specifications. This subcontract is part of the Department of Defense’s Maritime Supply Chain initiative and is classified under NAICS code 332112, indicating it falls within the precision machining and manufacturing sector for pumps and pumping equipment. The impellers must meet exacting quality and performance standards to ensure reliable operation in demanding environments, where failure is not an option. All work must be completed to stringent technical requirements without deviation, emphasizing dimensional accuracy, material integrity, and surface finish. The solicitation was posted on August 5, 2026, with a firm deadline for responses on August 12, 2026, leaving a limited window for qualified subcontractors to submit proposals. The place of performance and point of contact details are not specified, suggesting the contractor may have flexibility in location but must still meet all delivery and certification benchmarks. The contract is accessible through the DIBBS platform, and interested parties must ensure full alignment with the technical and compliance demands outlined in the full RFQ to be considered for award. There is no set-aside designation, meaning any eligible supplier may bid regardless of business size or ownership characteristics.

Nonferrous Forging

POSTED

about 8 hours ago

DEADLINE

Data retrieval failure — no sub-opportunities identifiableData retrieval for the prime contract has failed, preventing identification of any subcontract opportunities linked to this solicitation. The posting date is August 5, 2026, with a response deadline of August 17, 2026, and the opportunity is categorized as a subcontract under the Maritime Supply Chain agency within the Department of Defense. The place of performance is listed as Robins AFB with a zip code of 31098-1887, though no city, state, or country details are provided for the office address or point of contact. No solicitation number, NAICS code, set-aside type, or organization type is available, and the official link to the solicitation is accessible via the DIBBS platform.

POSTED

about 8 hours ago

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # SPE7M1-26-T-250H

The contract pertains to the procurement of 30 circuit card assemblies identified by NSN 5998-00-111-4498 and part number 65901-02973-044, with a unit price of $30.00 and a total value of $900.00. Delivery is required within 20 days under FOB origin terms, with no variance allowed in quantity, and acceptance occurs at the origin point. The items must be packaged in compliance with MIL-STD-2073-1E, marked according to MIL-STD-129, and contain no special marking codes. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, with Covered Defense Information rules applied. The goods are destined for the Government of Israel, Ministry of Defense, with a specified freight forwarder and government use identifiers included. The solicitation number is SPE7M1-26-T-250H, issued by the Department of Defense’s Maritime Supply Chain, with a response deadline of August 17, 2026, and a required delivery date of August 7, 2026. The contract falls under NAICS code 334418 and is administered through DLA’s eProcurement system, with all unit of issue conversions defined by official DoD standards.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 8 hours ago

DEADLINE

ALARM, GAS, AUTOMATIC

Solicitation # SPE7M1-26-T-250L

The contract pertains to the procurement of 307 units of an automatic gas alarm with NSN 6665-01-499-7234 under solicitation SPE7M1-26-T-250L, issued by the Department of Defense’s Maritime Supply Chain division. The solicitation is a total small business set-aside, with responses due by August 17, 2026, and requires delivery within 13 days after award. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, where revisions in effect at the time of solicitation issue or award govern compliance. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware except under specific exemptions for functional uses such as batteries, fluorescent lights, weapons systems, or authorized instruments, with portable devices containing mercury required to be shockproof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. The offeror must submit a complete data package covering both the approved and alternate parts, as no existing data is available. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Misty Slone, reachable via email and phone provided.

Other Measuring and Controlling Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-26-Q-1335

The seal assembly is a shaft-mounted, spring-loaded mechanical seal requiring pure carbon material proprietary to Morgan Advanced Materials, specifically Cage 80894, as defined by Drawing 5773203, Sheet 26. Manufacturing must comply with NAVSEA 5773203, Piece No. 10A, and Drawing Sheets 26 and 30, with three critical deviations: the outer shell must follow Ram Seal Drawing 01-250159 Rev B, the drive band must adhere to Ram Seal Drawing 11-250159 Rev B, and the spring retainer must conform to Ram Seal Drawing 12-250259 Rev A. Each unit must be delivered with a complete installation kit containing specified O-rings identified by part numbers 5773203-1.6, 5773203-1.7.1, 5773203-12.6.4, 5773203-1.8.1, 5773203-1.9.1, 5773203-4.1, 5773203-10.11, 5773203-12.6.5, and a 2-inch steel spanner wrench with a .250 inch pin per Fed Spec GGG-W-665 Type 2 Grade A. The contract mandates a Certificate of Quality Compliance for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and requires electronic submission of each COQC via the iRAPT system. Product verification testing may be invoked at the government’s discretion under DLAD 52.246-9004, and all supplies must conform to DLA packaging, configuration management, and inspection requirements including RQ002, RQ009, and RD003. The NSN 4320-01-269-8849 is solicited under a total small business set-aside with a delivery deadline of 30 days ADO for 104 units, sourced through the Department of Defense’s Maritime Supply Chain under contract SPE7M1-26-Q-1335.

Air and Gas Compressor Manufacturing

POSTED

about 8 hours ago

DEADLINE

MODIFICATION KIT, EL

Solicitation # SPE7M1-26-T-250F

This contract specifies the procurement of a Modification Kit, EL, with NSN 6105-01-705-8310 and part number 377-53322-000, supplied by JOHNSON CONTROLS NAVY SYSTEMS, LLC. The delivery is for one unit, to be shipped FOB destination within 20 days of contract award, with no quantity variance allowed. All packaging and preservation must strictly comply with MIL-STD-2073-1E, Appendix D, for kits, and marking must adhere to MIL-STD-129. Packaging requirements as defined by DLA’s RP001 apply, including palletization and the use of specified preservation methods, wrapping, and cushioning materials. The item is designated as a Critical Application Item and may involve Covered Defense Information under RD003. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling. The delivery destination is the USS CANBERRA LCS 30 at FPO AP 96694, and shipment logistics must follow DLAD Proc Note C19 for transportation and C20 for first destination delivery. The contract solicitation number is SPE7M1-26-T-250F, with a required delivery date of August 3, 2026, and procurement is managed under NAICS code 333618 by the Department of Defense’s Maritime Supply Chain.

Other Engine Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

INDICATOR, CARBON MONOX

Solicitation # SPE7M1-26-T-250G

This contract specifies the procurement of a carbon monoxide indicator unit with part number BWC2-M25100 and NSN 6665200018480, with a quantity of five units to be delivered within 20 days to the USS ROBERT SMALLS CG 62. Delivery is FOB destination with zero variance allowed and inspection and acceptance occurring upon arrival. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific storage and handling requirements such as dry climate control and prohibition of cushioning materials. All hazardous materials, including lithium batteries, must adhere to DLA packaging and shipping standards, with marking and documentation following strict DoD guidelines. The item is classified as a critical application product with a TYPE 2 shelf life of 12 months extendable, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the supplied hardware except under approved exceptions for functional components like certain instruments or sensors as defined by NAVSEA. Suppliers are required to submit Safety Data Sheets (SDS) and Hazard Communication Standard (HCS) compliant labels in accordance with 29 C.F.R. 1910.1200, effective since June 1, 2015, replacing the previous Material Safety Data Sheet (MSDS) requirements. Employees must be trained on these updated standards, including proper classification, labeling, and handling procedures. The contract incorporates technical and quality requirements from the DLA Master List, and the unit of issue is defined by DoD standards. The solicitation number is SPE7M1-26-T-250G, with a required delivery date of August 3, 2026, and responses due by August 17, 2026. Transportation and shipment instructions reference DLA procedural notes C19 and C20, and the item is subject to federal acquisition regulations under the North American Industry Classification System code 334511.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

ALARM, GAS, AUTOMATIC

Solicitation # SPE7M1-26-T-250J

The contract is for the procurement of 185 units of an automatic gas alarm identified by NSN 6665-01-499-7234 under purchase request 7015538145, with a delivery requirement of 13 days after order placement. The solicitation number is SPE7M1-26-T-250J, issued by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency, with a response deadline of August 17, 2026. The technical requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with revision control depending on the type of acquisition—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision in effect on the RFP issue date unless an amendment supersedes it. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware or equipment, unless exempted for specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or NAVSEA-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in accordance with NAVSEA 5100-003D. Offerors must provide a complete data package covering both the approved and alternate parts, as no existing data is available for this item. The place of performance is Tracy, California, with Misty Slone listed as the primary point of contact.

Other Measuring and Controlling Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

CONNECTOR, RECEPTACL

Solicitation # SPE7M1-26-U-5053

The contract solicitation SPE7M1-26-U-5053 seeks the procurement of an electrical connector, receptacle, identified by NSN 5935015240367 and part number 2583A-125, under an indefinite-delivery contract structure with an estimated annual quantity of 11 units and a maximum contract value of $350,000. Deliveries are required FOB Origin with a 57-day lead time following award, and goods will be inspected and accepted at the destination point. All supplies must comply with stringent DLA packaging and quality requirements, including adherence to MIL-STD-129 for labeling and marking, RP001 for palletization, and RA001 for technical specifications from the DLA Master List of Technical and Quality Requirements, which supersede commercial standards such as ASTM D3951. Hazardous materials, as defined by FED-STD-313, must be packaged under TQ requirement IP025 and labeled per OSHA’s Hazard Communication Standard, while non-hazardous items must meet commercial packaging standards unless overridden by DLA requirements. Physical identification of bare items is mandated under RQ017. The contract includes mandatory clauses related to employment equity, anti-trafficking, sustainable products, cybersecurity safeguards including NIST SP 800-171 and DFARS 252.204-7012, and prohibitions on covered defense telecommunications equipment. Payment will be processed exclusively via Wide Area WorkFlow using the Invoice and Receiving Report method, and all offers must be submitted electronically through the DIBBS portal by the August 20, 2026 deadline. The solicitation requires full compliance with Buy American provisions and mandates U.S.-flag vessels for ocean transportation unless waived. No unit price is listed in the CLIN, but the total estimated value is capped at $350,000, with award based on price and other factors, not as a strictly lowest price technically acceptable procurement. The contract is unilateral, allowing the Government to issue delivery orders under predetermined terms, and includes guaranteed minimum quantities. All representations and certifications by offerors remain unpopulated at the solicitation stage.

Electronic Connector Manufacturing

POSTED

about 8 hours ago

DEADLINE

HOUSING SECTION, LIQ

Solicitation # SPE7M1-26-T-250A

This contract pertains to the procurement of a housing section and pump under solicitation SPE7M1-26-T-250A, with a single unit of 1 EA identified by NSN 4320-01-511-0467 and part number 009-1107B08-347552A from Carver Pump Company. Delivery is required within 20 days FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. All items must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, wrapping, and palletization standards. Mercury and mercury-containing compounds are strictly prohibited in or on the supplied hardware except for designated functional uses such as certain batteries, lighting, instruments, sensors, controls, weapon systems, and NAVSEA-specified reagents, with additional containment and shockproofing mandates for portable devices. Packaging must adhere to RP001 and special marking code 00-00 applies, with no unique identifiers beyond standard requirements. Shipment must be delivered to the FPO address for USS JOHN P MURTHA LPD 26 using the fastest traceable means, explicitly prohibiting parcel post, and must follow DLA procurement notes C19 and C20 for transportation routing. The supply is tied to Project LK5 TP 2 with a required delivery date of August 3, 2026, and is subject to federal procurement standards incorporating technical and quality requirements referenced from the DLA Master List. The contracting office is under the Department of Defense’s Maritime Supply Chain, with Michael Reese as the primary point of contact.

Fluid Power Pump and Motor Manufacturing

POSTED

about 8 hours ago

DEADLINE