Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Loop Clamp Manufacturing & Supply

Open

Federal

Response Deadline11/19/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Precision Loop Clamp Manufacturing and Supply subcontract involves the fabrication and delivery of one Loop Clamp, identified by NSN 5340-01-603-8176, for the DLA Weapons Support Land Supply Chain. The selected contractor must manufacture the component according to the provided Technical Data Package and adhere to strict quality control standards, including inspection and sampling per MIL-STD-1916 or ASQ H1331. Additionally, all items must be marked and packaged in accordance with MIL-STD-129 and MIL-STD-2073-1E. Critical compliance requirements for this project include FAA Airworthiness Approval and adherence to NIST SP 800-171 standards. The final delivery must include the physical clamp along with comprehensive supply chain traceability documentation. This effort is managed under NAICS code 332510 for the Department of Defense, with the place of performance located in Chicopee, Massachusetts.

General Info

Contract for manufacturing and supplying one Loop Clamp for DLA Weapons Support Land.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

332510 - Hardware Manufacturing

Place of Performance

CHICOPEE, MA, 01022-1502, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-27-T-4422.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CLAMP, LOOP

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 8

subcontract

Response DeadlineNov 19

Submission deadline

Response Deadline

11/19/2026, 12:00:00 PM ESTin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies one Loop Clamp (NSN 5340-01-603-8176) for prime contractors on DLA Weapons Support Land Supply Chain projects. Fabricates the clamp per the Technical Data Package, performs inspection and sampling per MIL-STD-1916 or ASQ H1331, and marks/packages per MIL-STD-129 and MIL-STD-2073-1E. Requires FAA Airworthiness Approval (RQ019) and NIST SP 800-171 compliance. Delivers the clamp and supply chain traceability documentation.

Similar Contracts

Same NAICS industry code

Manufacturing of Pin-Rivets (Part HL12V-5-2)This subcontract involves the manufacture of 349 Pin-Rivets, specifically Part Number HL12V-5-2 / NSN 5320-00-001-8276, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The fabrication process must adhere to the DLA Master List of Technical and Quality Requirements and requires the use of precision machining equipment. All finished products must undergo quality sampling and inspection in accordance with MIL-STD-1916 or ASQ H1331 standards. The contract mandates strict compliance with the Buy American Act. Performance will take place in Tracy, California, under NAICS code 332510. Interested parties must respond by November 16, 2026, to provide the total quantity of inspected and finished rivets as specified.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Close Tolerance Screw SupplyThis HUBZone set-aside subcontract involves the manufacture and supply of high-precision, close-tolerance screws for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for providing 57,600 individual screws, distributed across 576 packages, ensuring all items strictly adhere to the military and federal standards specified for NSN 5305011937608. A critical requirement of the agreement is the implementation of Packaging Code ZZ, which mandates that a wrap or sleeve protect the entire length of the shank and threads. The work is associated with NAICS code 332510 and will be performed in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Manufacturing of Connecting Rings (NSN 5365010686691)This subcontract involves the manufacture and supply of 253 round connecting rings for prime contractors supporting Department of Defense contracts through the DLA Weapons Support ASC Supplier OE and AF Div. All components must be fabricated to the exact specifications of NSN 5365010686691 and must strictly comply with the DLA Master List of Technical and Quality Requirements. Additionally, the supplier is required to provide a Safety Data Sheet for any hazardous materials utilized during the fabrication process. The project falls under NAICS code 332510 and will be performed in Phoenix, Arizona. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Loop Clamp Manufacturing and SupplyThis subcontract involves the manufacture and supply of specialized loop clamps for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work requires the provision of one unit identified by NSN 5340121546766, which must match TRANSFLEX DBA F5202 P/N RSGU1.15/15-W5. All items must be marked and labeled in strict accordance with MIL-STD-129 standards. The final product is to be delivered to the Norfolk Naval Shipyard, with the place of performance located in Portsmouth. This procurement falls under NAICS code 332510 and is managed by the Department of Defense. Interested parties must adhere to the response deadline of November 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Flat Washer SupplyThis subcontract involves the manufacture or sourcing of 21 flat washers conforming to NSN 5310017235023 for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The contractor is responsible for providing all necessary Safety Data Sheets for hazardous materials and ensuring that all delivery documentation adheres to DFARS Appendix F receiving report requirements. The contract is categorized under NAICS code 332510, with the place of performance located in New Cumberland. Shipping is handled via FOB Origin. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Supply of Eyepiece Assembly, OThis subcontract involves the manufacture or procurement of five Eyepiece Assembly, O units, identified by NSN 6650015828617, for prime contractors delivering to DLA Weapons Support. The selected provider must ensure all assemblies meet strict technical data specifications and coordinate the shipment of goods through the First Destination Transportation program. Managed by the Department of Defense via the DDSP New Cumberland Facility, the contract requires the provider to possess a valid CAGE code and UEI. The performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 332510. Responses to the solicitation are due by November 19, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

Precision Manufacturing of Straight Headless PinsThis subcontract involves the precision manufacturing of 112 straight, headless pins (NSN 5315-00-927-3399) for prime contractors supporting the DLA Weapons Support ASC Commodities Division. All components must be fabricated in strict accordance with Basic Drawing NR 19200 8215936, Revision D, and must meet Critical Application Item quality standards. The work is to be performed in Texarkana, Texas, under NAICS code 332510. Production requires the use of precision machining equipment, as additive manufacturing is explicitly prohibited. The manufacturer must maintain compliance with SAE AS9003 or ISO 9001 quality management systems and adhere to MIL-STD-1916 or ASQ H1331 sampling plans. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Resilient Utility Mount SupplierThis subcontract involves the manufacture or procurement of 38 Resilient Utility Mounts under NSN 5340017159813 for prime contractors supporting the Defense Logistics Agency Weapons Support Land Supply Chain. The supplier must ensure all units are produced according to strict NSN specifications and comply with MIL-STD-129 for marking as well as RP001 and MIL-STD-2073-1E for packaging requirements. The completed mounts are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in New Cumberland. This requirement falls under NAICS code 332510 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Blind Rivet Manufacturer/Supplier (NSN 5320-01-305-4153)This subcontract involves the manufacture and supply of 450 blind rivets, identified as NSN 5320-01-305-4153, for prime contractors supporting DLA supply contracts. The items must be produced according to current part standards, specifically excluding the use of additive manufacturing processes. All units must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards for delivery to the DLA Distribution DDSP New Cumberland Facility. To be eligible, the supplier must maintain a quality system certified under SAE AS9003 or ISO 9001 and demonstrate cybersecurity compliance with NIST SP 800-171. This requirement is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, falling under NAICS code 332510.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Supply of Shear Bolts (NSN 5306-01-313-1693)This subcontract involves the supply of 47 specialized shear bolts for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The contractor is responsible for manufacturing or sourcing bolts that meet NSN 5306-01-313-1693, with a strict requirement for Class 3A and 3B thread inspections conducted per System 22 of FED-STD-H28/20. Notably, the use of additive manufacturing is prohibited for this requirement. All deliverables must be packaged according to ASTM D3951 and RP001 standards, with marking and labeling adhering to MIL-STD-129 and MIL-STD-130N. The place of performance is designated as Tinker AFB. Interested parties must respond by November 16, 2026, under NAICS code 332510.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Supply of Flat Washers (NSN 5310000788634)This subcontract involves the manufacture or procurement of 192 flat washers conforming to the technical specifications of NSN 5310000788634 for the DLA Weapons Support ASC Commodities Division. The selected provider is responsible for ensuring all units meet strict quality and material standards and must coordinate delivery to DLA Distribution San Diego through the First Destination Transportation program. The project falls under NAICS code 332510 and is performed in San Diego, California. Interested parties must adhere to the response deadline of November 16, 2026, to provide supplies for prime contractors supporting Department of Defense operations.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Manufacturing of Steel Loop Clamps (NSN 5340-00-958-8457)This subcontract involves the manufacturing of 3,047 steel loop clamps, part number MS21333-78, for the DLA Weapons Support Land Supply Chain. The scope of work includes the fabrication of plain and cushioned loop clamps using precision forming and stamping equipment. All components must be produced in strict accordance with technical standard NASM21333 Revision 3 and TDP Rev B Gen 2, with specific requirements for applying cushioning to the steel elements. The project is subject to strict regulatory compliance, specifically requiring adherence to the Berry Amendment and the Buy American Act. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 19, 2026, to support the Department of Defense under NAICS code 332510.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

Fabrication of Flat Mounting Plates (NSN 5340-01-324-3454)This subcontract involves the fabrication and supply of four finished flat mounting plates for the DLA Weapons Support Land Supply Chain. The contractor is responsible for manufacturing the plates according to Basic Drawing NR 97403 13228E5309 Revision A while adhering to DLA quality requirements RA001, RQ001, and RQ002. All deliverables must be properly labeled and packaged for delivery to Fort Eustis. To qualify, the provider must utilize precision machining equipment and ensure full compliance with DFARS specialty metals regulations. Additionally, the contractor is required to maintain either SAE AS9003 or ISO 9001 certification. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 4 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing specialized MIL-SPEC packaging and marking services for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work requires strict adherence to MIL-STD-2073-1E for packaging, specifically QUP 001 and Pres Mthd 10, as well as MIL-STD-129 and MIL-STD-130N for marking. The contractor must utilize industrial labeling equipment to ensure UID compliance and apply approved MIL-SPEC preservatives to deliver shipment-ready units to DDSP New Cumberland. Operational requirements include a thorough understanding of DLA shipping protocols and proficiency with the Wide Area Workflow system. The project falls under NAICS code 488410 and is managed by the Department of Defense. Interested parties must note the response deadline of November 19, 2026, for this performance location in New Cumberland.

Motor Vehicle Towing

POSTED

about 4 hours ago

DEADLINE

Specialized Surface Treatment and FinishingThis subcontract for Specialized Surface Treatment and Finishing supports the DLA Weapons Support Land Supply Chain by providing surface treatment and plating for mounting brackets. The contractor is responsible for applying finishes in strict accordance with the 19207 series drawings and QAP 16236 / SQAPCARCLTPHOS81361 specifications using industrial plating tanks and chemical conversion processes. The project is categorized under NAICS code 332813 and will be performed in New Cumberland. Due to the nature of the work, the contractor must maintain full compliance with environmental regulations and ITAR/EAR export controls to ensure the secure delivery of finished, coated components.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 4 hours ago

DEADLINE

Precision Fabrication of Mounting Brackets (NSN 5340-01-498-1454)This subcontract involves the precision fabrication of 40 mounting brackets for the DLA Weapons Support Land Supply Chain. The manufacturer must produce the units in strict accordance with Basic Drawing NR 19207 12477623 Rev B, TDP Rev A Gen 1, and QAP 16236. All materials used must comply with the Buy American Act and the Berry Amendment, requiring the use of specialized precision machining equipment. To be eligible, the contractor must hold CMMC Level 2 and US/Canada JCP certifications. The final delivery consists of 40 finished brackets accompanied by a Certificate of Conformance. The project is categorized under NAICS code 332312 and is associated with NSN 5340-01-498-1454, with performance taking place in New Cumberland.

Fabricated Structural Metal Manufacturing

POSTED

about 4 hours ago

DEADLINE

First Article Testing and ValidationThis subcontract for First Article Testing and Validation supports prime contractors on DLA Weapons Support Land Supply Chain projects. The selected provider will perform validation testing on five initial units to ensure the manufacturing process aligns with the Technical Data Package and established quality standards. Work involves using precision testing equipment and metrology to verify material properties and dimensions, and must be conducted within a certified testing facility located in New Cumberland. The primary deliverables for this engagement are five validated units and a formal First Article Test Report. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must adhere to the response deadline of November 19, 2026.

Testing Laboratories and Services

POSTED

about 4 hours ago

DEADLINE

Phosphate Coating ServicesThis subcontract for Phosphate Coating Services supports the DLA Weapons Support Land Supply Chain by providing specialized coating for bow handles. The selected provider must perform all work in strict accordance with technical drawings and RQ036 Phosphate Coating Supplier Certification Requirements. To qualify, the contractor must possess industrial phosphate plating tanks and maintain full ITAR and EAR compliance for the handling of controlled hardware. The project is managed under NAICS code 332813 for the Department of Defense, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must adhere to the response deadline of November 19, 2026, to provide the required phosphate-coated deliverables.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 4 hours ago

DEADLINE

Precision Machining and Fabrication of Bow HandlesThis subcontract involves the precision machining and fabrication of 87 finished bow handles for prime contractors supporting the DLA Weapons Support Land Supply Chain. All manufacturing must strictly adhere to Basic Drawing NR 19200 12557008 Revision C and TDP Rev B Gen 2. The project requires the use of precision machining equipment and materials that comply with the Buy American Act and the Berry Amendment. To be eligible, contractors must maintain CMMC Level 2 and US/Canada JCP certifications to ensure secure access to ITAR and EAR regulated data. The work is associated with NAICS code 332710 and will be performed in New Cumberland. Interested parties must respond by November 19, 2026.

POSTED

about 4 hours ago

DEADLINE

Swivel Joint, Tube (NSN 4730-01-395-2235)This subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the manufacture or sourcing of 94 specialized tube swivel joints identified by NSN 4730-01-395-2235. The supplier must ensure all units meet the technical acceptability requirements of the Engineering Support Activity and adhere to 4730 FSC fluid control and pipe/tube fitting material standards. Delivery of the units is designated as FOB Origin. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336413. Interested parties must respond by November 23, 2026, to provide these components for prime contractors fulfilling DLA supply contracts.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

Fabrication and Supply of Access Covers (NSN 5340-01-559-9054)This subcontract involves the fabrication and supply of 10 access covers under NSN 5340-01-559-9054 for prime contractors supporting the DLA Weapons Support Land Supply Chain. The manufacturer must strictly adhere to the provided technical data package and is expressly prohibited from using additive manufacturing processes. All units must meet RA001 quality standards and comply with the Berry Amendment and the Buy American Act. Logistical requirements specify that packaging must follow MIL-STD-2073-1E and marking must comply with MIL-STD-129. The project falls under NAICS code 332710, with performance taking place in New Cumberland. The response deadline for this requirement is November 19, 2026.

POSTED

about 4 hours ago

DEADLINE

Supply of TRI-TEC Manufacturing ComponentsThis subcontract involves the supply of precision-manufactured components for prime contractors supporting the DLA Weapons Support Land Supply Chain within the Department of Defense. The scope of work requires the manufacture or sourcing of part numbers 810300PL and 810336 in strict accordance with provided technical specifications. All deliverables must adhere to specific military standards, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per RP001. The agreement specifies the delivery of two units of material on an FOB Origin basis, with the place of performance located in Tracy, California. The contract falls under NAICS code 332710 and was posted on November 8, 2026, with a response deadline of November 19, 2026.

POSTED

about 4 hours ago

DEADLINE

Supply of Drawer Extension Slide AssembliesThis subcontract involves the supply of five drawer extension slide assemblies for prime contractors working on projects for the Defense Logistics Agency Weapons Support Land Supply Chain. The required components must match NSN 5340-01-125-5333 or part numbers 1503606-R, GS590AW4R, or 05236-1503606R. Performance will take place in Fort Bragg, North Carolina. The contractor must ensure full compliance with MIL-STD-129 marking standards and DFARS 252.225-7001 Buy American requirements. Additionally, the provider is required to maintain active registrations in both SAM and WAWF. The response deadline for this opportunity is November 19, 2026.

Drafting Services

POSTED

about 4 hours ago

DEADLINE

Fluid Filter Supply (NSN 2940-01690-4005)This subcontract involves the manufacture and supply of fluid filters specifically meeting the technical specifications for NSN 2940-01690-4005 to support prime contractors under the Defense Logistics Agency Weapons Support Land Supply Chain. The contractor is responsible for sourcing or producing the filters and ensuring all items are packaged and marked in strict accordance with MIL-STD-2073-1E, RP001, and MIL-STD-129. Additionally, the provider must guarantee full compliance with the Buy American Act and the Berry Amendment before delivering the finished products to the designated destination. The opportunity is categorized under NAICS code 339910 and is managed by the Department of Defense. Performance for this contract is centered in New Cumberland, Pennsylvania. Interested parties must adhere to the timeline established by the posting date of November 8, 2026, with a final response deadline of November 19, 2026.

Jewelry and Silverware Manufacturing

POSTED

about 4 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Supply of Machine Bolts (NSN 5306001632849)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Manufacturing and Supply of Roller Bearing Units (P/N 842-349813-3)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

Manufacture and Supply of Ball Rod End Bearings (MS21152-5)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Lock Washer Supply

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Flat Washer Manufacturing and Supply

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Supply of Blind Rivets (NSN 5320-01-046-5436)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Supply of Butt Hinges (NSN 5340-01-710-4966)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

PIN, GROOVED, HEADLESS

Solicitation # SPE4A7-27-T-3446

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

BRACKET, MOUNTING

Solicitation # SPE7L1-27-T-4371

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE7L1-27-T-4440

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE4A5-27-T-2898

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-027N

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS