This Subcontract opportunity from Department Of Defense was posted on July 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Precision Machined Pump Shaft Sleeve Component

Closed

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332721

New

Pin Assemblies

Solicitation # pin-assemblies

Mercer Engineering Research Center is soliciting bids from qualified suppliers for the fabrication of precision ground pin assemblies. The required components feature diameters ranging from 0.155 to 3 inches and lengths between 3 and 10 inches. This opportunity is open to performance across all U.S. states and is specifically set aside for various small business categories, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 13, 2026. The solicitation is categorized under NAICS code 332721. For further details or inquiries, potential suppliers should contact Michael Lange at the Mercer Engineering Research Center.

Mercer Engineering Research Center

POSTED

DEADLINE

SHAFT,SHOULDERED — 3040014675264 — SPRPA127QXA93

Solicitation # SPRPA127QXA93

This solicitation, issued by DLA Aviation at Philadelphia for the Department of the Navy, is a Request for Quotations for the procurement of 23 units of a shoulder shaft, identified by NSN 3040-01-467-5264 and NIIN 014675264. The contract requires delivery within 90 days on an FOB Destination basis, with inspection and acceptance occurring at the origin. The government intends to make a single award to a technically acceptable offeror based on a combination of past performance and price, with past performance serving as the primary evaluation factor. The technical requirements mandate adherence to TDP Version 001, with markings and packaging following MIL-STD-130 and MIL-STD-2073 respectively. Specific packaging levels are defined for domestic and overseas shipments, and contractors must comply with ISO9001 quality standards. The contract incorporates several critical FAR and DFARS clauses, including prohibitions on hexavalent chromium, requirements for the Buy American program, and strict cybersecurity safeguards under DFARS 252.204-7012. All payment requests and receiving reports must be processed electronically through the Wide Area Workflow system.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-035Z

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-036L

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-030U

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-033L

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-033S

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Fwd Closeout Frame Ring SupplyThis small business set-aside subcontract involves the fabrication and supply of four Forward Closeout Frame Rings for aerospace projects managed by the Naval Research Laboratory under the Department of Defense. The selected contractor must produce part number 5761-26-NRL26P-001 in strict accordance with drawing 5761-26-NRL26P-001 REV, utilizing precision machining or forming to ensure all controlled drawing specifications are met. Eligible bidders must be registered with the Joint Certification Program to participate. The performance of this contract is centered in Washington, DC, with a response deadline set for November 16, 2026. This opportunity is specifically categorized under NAICS code 332721 for specialized machining services.

Naval Research Laboratory

POSTED

DEADLINE

Radome Band Clamp SupplyThis small business set-aside subcontract involves the supply of six Radome Band Clamps for prime contractors supporting Naval Research Laboratory aerospace projects. The selected provider must fabricate part number 5763-26-LP-001 using precision machining or forming techniques to strictly adhere to the specifications outlined in drawing 5763-26-LP-001 REV. Eligible contractors are required to maintain registration with the Joint Certification Program to participate. The performance of this contract is centered in Washington, DC, under the oversight of the Department of Defense. Interested parties must submit their responses by November 16, 2026.

Naval Research Laboratory

POSTED

DEADLINE

Solicitation # N00173-27-Q-1301424033

The Naval Research Laboratory is soliciting quotations for the procurement of specific hardware components for radome assemblies under solicitation N00173-27-Q-1301424033. This is a Total Small Business set-aside competitive procurement on a Firm-Fixed-Price basis. The required supplies include six Radome Band Clamps (Part 5763-26-LP-001) and four FWD Closeout Frame Rings (Part 5761-26-NRL26P-001), both of which must be manufactured according to controlled drawings. Due to the nature of these drawings, this opportunity is restricted exclusively to Joint Certification Program registered vendors. Interested offerors must be an Original Equipment Manufacturer, authorized dealer, distributor, or reseller to ensure OEM warranty and service are maintained. Submissions must include the vendor name, Cage Code, and JCP Certification Number, and must be sent via email to the designated points of contact. The government will utilize a Lowest Price Technically Acceptable evaluation method to award the contract to the responsible offeror. All equipment must be new, and FOB Destination is the preferred delivery method to the Naval Research Laboratory in Washington, DC.

Naval Research Laboratory

POSTED

DEADLINE

Manufacture and Supply of Straight Headless Pins (NSN 5315-01-656-4368)This subcontract involves the manufacture and supply of high-precision straight, headless pins under NSN 5315-01-656-4368 for the DLA Weapons Support ASC Commodities Division. The scope of work requires the use of CNC equipment and metrology tools to perform precision machining and forming, with final delivery taking place at Tinker AFB. To qualify, the provider must maintain ISO 9001:2015 certification and FAA Airworthiness approval. All deliverables must comply with MIL-STD-129 and MIL-STD-2073-1E standards and be accompanied by full traceability records and airworthiness documentation. The response deadline for this opportunity is November 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Flat Washer Manufacturing & SupplyThis subcontract involves the precision manufacturing and supply of 4,096 flat washers, specifically part NAS1149V0332M, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The hardware is designated for critical applications and must be produced in strict accordance with the NAS1149 part standard, with a specific prohibition against the use of additive manufacturing. Performance will take place in Cherry Point, North Carolina, under NAICS code 332721. Compliance requirements are stringent, necessitating adherence to the Buy American Act and the Berry Amendment for all materials. Quality control must be maintained through sampling plans per MIL-STD-1916 or ASQ H1331, while packaging and marking must follow ASTM D3951 and MIL-STD-129 standards. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days

AI Contract Overview

The contract involves the manufacture and delivery of a precision-engineered shaft sleeve component designed specifically for use in a naval pump system, with all specifications aligned to rigorous military standards for fit, form, function, and long-term durability under operational conditions. The component is critical to the performance and reliability of naval propulsion and fluid handling systems, requiring advanced machining techniques and strict quality control to ensure dimensional accuracy and material integrity in high-stress marine environments. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 332721 indicating classification under machine shop and turned product manufacturing. The solicitation was posted on July 13, 2026, and the place of performance and other logistical details are not specified, but the work is expected to be conducted in support of U.S. naval operations. The contract is managed through the DIBBS portal under reference SPE7M126P4705, and while the type of set-aside and point of contact are not provided, the scope implies compliance with defense supply chain requirements and potential inspection or certification processes typical for military-grade components.

General Info

Manufacture and delivery of military-standard shaft sleeve for naval pump systems under DLA subcontract.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

332721 - Precision Turned Product Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7M1-26-T-5559.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SLEEVE, SHAFT, PUMP

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJul 13

subcontract

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture and delivery of a precision-engineered shaft sleeve component for a naval pump system, meeting military specifications for fit, form, function, and durability.