Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Machining and Finishing

Active

Federal

Response Deadline09/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Precision Machining and Finishing involves the final machining, grinding, and finishing of cast or forged turbine parts to support DLA supply contracts. The selected provider will perform CNC milling, turning, grinding, surface finishing, and deburring using precision measuring instruments and CMM equipment. All work must strictly adhere to the quality control standards specified in the NSN technical data package to ensure the delivery of high-precision turbine components. The project is managed by the Department of Defense under the ASC Supplier Oper AE and AF Div, with the place of performance located at Tinker AFB. Falling under NAICS code 332710, the opportunity was posted on September 3, 2026, with a response deadline of September 9, 2026.

General Info

Precision machining and finishing of turbine parts for DoD at Tinker AFB.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332710 - Machine ShopsView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-26-T-687F.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PARTS KIT, COOLING T

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 3

subcontract

Response DeadlineSep 9

Submission deadline

Response Deadline

09/09/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs final machining, grinding, and finishing of cast or forged turbine parts for prime contractors delivering DLA supply contracts. Executes CNC milling, turning, grinding, surface finishing, and deburring. Utilizes CNC machinery, precision measuring instruments (CMM), and grinding equipment. Adheres to quality control standards in the NSN technical data package. Delivers finished, precision-machined turbine parts.

Similar Contracts

Same NAICS industry code

26-SIMACQ-E70-0003 Lifting Cap

Solicitation # N6339426Q4070

Solicitation N6339426Q4070, issued by the Naval Surface Warfare Center, Port Hueneme Division, seeks a firm-fixed-price quote for one Lifting Cap Certification Weldment (Part Number 8902539). This item serves as a test fixture for the Missile Exhaust Containment Structure to support periodic weight testing for the Littoral Combat Ship Surface Warfare Mission Package. The requirement includes the provision of necessary transportation fixtures or crates for delivery to Port Hueneme, California, with an estimated final delivery timeline of 60 calendar days from the date of award receipt. Technical specifications require adherence to various military standards, including MIL-STD-130 for marking, MIL-DTL-15024 for identification plates, and specific epoxy-polyamide coating systems. Recent amendments have updated the statement of work to include drawing 8794830 REV B and parts list PL8794830 REV B, while extending the final response deadline to September 10, 2026. The contract will be awarded to the lowest-priced, technically acceptable offer. Evaluation factors include total price, technical capability, past performance, and a mandatory requirement for a verified CMMC Level 1 (Self) status in the Supplier Performance Risk System. Offerors must provide an active CAGE code and an approved DD Form 2345 to access controlled unclassified information. Administrative requirements include electronic invoicing via Wide Area Workflow and compliance with the Buy American program. While some documentation suggests a small business set-aside, other sections indicate it is not a set-aside; however, the metadata lists it as a total small business set-aside under NAICS code 332710.

Commanding Officer

POSTED

about 11 hours ago

DEADLINE

DRAWER ASSEMBLY,AIR — 1680016616785 — SPRPA126QZB94

Solicitation # SPRPA1-26-Q-ZB94

The Department of the Navy, through the DLA Aviation office in Philadelphia, has issued solicitation SPRPA126QZB94 for the procurement of air drawer assemblies. This request was posted on September 4, 2026, with a response deadline set for September 14, 2026. The contract requires a specific vendor part number format where the CAGE code occupies positions 1 through 6 and the part number occupies positions 7 through 40. Performance of the contract is designated for Philadelphia, Pennsylvania.

Pa DLA Aviation At Philadelphia

POSTED

about 19 hours ago

DEADLINE

Manufacturing of Mounting Brackets (NSN 534006024977)

LAND SUPPLY CHAIN

POSTED

DEADLINE

Fabrication of Platform Braces (NSN 1730-00-056-4082)

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Paper Shredding Machine Blades Supply

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

CONNECTOR, RECEPTACL

Solicitation # SPE4A5-26-T-405V

This solicitation from the Department of Defense, specifically the ASC Supplier OEM Division, is for the procurement of one receptacle connector under part number 4920-01-565-4267. The contract requires delivery within 79 days after the order is placed. Compliance with DLA master technical and quality requirements is mandatory, including specific standards for packaging, the removal of government identification from non-accepted supplies, and physical item marking. Quality assurance must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. The contract imposes strict security and legal obligations, including CMMC Level 2 certification and adherence to export control regulations under ITAR and EAR. Access to technical data is restricted to approved contractors with US/Canada Joint Certification Program certification. Item Unique Identification is not required for this specific request.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

STRAP, TIEDOWN, ELECT

Solicitation # SPE4A7-26-T-714W

This contract is for the procurement of three electrical tiedown straps, identified by NSN 5975-01-625-9229 and associated with Howell Laboratories Inc part numbers 8389-2-9 and 8708-G501. The order is issued by the Department of Defense under solicitation SPE4A7-26-T-714W, with a required delivery date of August 28, 2026, and a delivery timeframe of 20 days after the order. The items are to be shipped FOB Origin to the USS America LHA 6. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except where functionally required and specified by NAVSEA.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

BOARD, AIRCRAFT EQUI

Solicitation # SPE4A5-26-T-384U

Solicitation SPE4A5-26-T-384U, issued by DLA Aviation ASC Supplier Oper OEM Division, is a request for quotations for two aircraft equipment boards, identified by NSN 4920-01-522-4417. The requirement specifies a delivery period of 54 days after receipt of order, with an original required delivery date of August 24, 2026. Shipping is designated as FOB Origin under the First Destination Transportation program, with the delivery destination being DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The contract mandates strict adherence to quality and packaging standards, requiring packaging per ASTM D3951 and palletization per RP001, with DLA Master List of Technical and Quality Requirements taking precedence. Marking and labeling must comply with MIL-STD-129. Quality assurance involves sampling methods per MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances if MIL-STD-105/ASQ Z1.4 is utilized. The solicitation incorporates various federal regulations, including the Buy American and Balance of Payments Program, NIST SP 800-171 cybersecurity requirements, and the Hazard Communication Standard for any applicable hazardous materials. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS) by September 1, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A0-26-T-4677

This solicitation from the Department of Defense Aviation Supply Chain ESOC Buys is for the procurement of one cable assembly, identified by NSN 4920-01-565-4272. The contract requires delivery within five days after receipt of order and is performed at Cannon AFB. The procurement is subject to specific DLA technical and quality requirements, including strict packaging standards and the removal of government identification from non-accepted supplies. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling methods, with specific AQLs assigned to critical, major, and minor attributes. The contract includes stringent security and legal mandates, including CMMC Level 2 certification, Covered Defense Information protocols, and strict export controls under ITAR and EAR regulations. Access to technical data is limited to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Drive Shaft Machining and Alignment

Base BOSTON(00024)

POSTED

DEADLINE

Precision Component Fabrication for F100 Fuel Pumps

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Solicitation # PR466526

The Manufacturing Science Division at Oak Ridge National Laboratory, under the Department of Energy, is soliciting bids for the procurement of metal fabricated mounting pads. This requirement is categorized under NAICS code 332710 and is managed by the ORNL UT-Battelle LLC-DOE Contractor. Interested parties must coordinate with the primary point of contact, Taylor Hunt, to undergo the Export Control Screening process, which is required to access the detailed drawings, bill of materials, and pricing sheets. The solicitation, identified as PR466526, was posted on September 3, 2026, with a response deadline of September 10, 2026. The place of performance is located in Oak Ridge, Tennessee. All inquiries and submissions should be directed to the designated procurement officer to ensure compliance with security and screening protocols.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

RECEIVER-TRANSMITTER, RADIO

Solicitation # SPE4A7-26-R-XB24

Solicitation SPE4A7-26-R-XB24 is a federal commercial items procurement issued by the Department of Defense ASC Supplier Oper AE and AF Div for the acquisition of radio receiver-transmitters under NSN 5820-01-650-5126. This is a total small business set-aside under NAICS code 334220, with a guaranteed minimum quantity of 35 units and a maximum contract value of 350,000 dollars. The specific requirement listed is for 140 units with a delivery timeframe of 115 days after receipt of order. All deliveries must be within the continental United States, and early or partial deliveries are acceptable at no additional cost to the government. Offers must be submitted via hard copy by September 18, 2026, as quotations through the DIBBS system are not acceptable. Quality assurance programs must comply with ISO 9001:2015, as MIL-I-45208 and MIL-Q-9858 are no longer acceptable specifications. The contract is structured as an indefinite delivery contract evaluated over five one-year base periods based on estimated annual demand. Requirements include SAM registration and adherence to specific DLA Aviation Notices, including DAAN-11-01 and DAAN-13-01.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

SCREW, CLOSE TOLERANCE

Solicitation # SPE4A7-26-R-0740

This contract is for an indefinite quantity, fixed-price agreement to supply NSN 5305-01-057-3757, a close tolerance screw used in F-15 Eagle aircraft, designated as a critical application item. The requirement is exclusively set aside for small businesses through full and open competition after excluding non-small business sources. The base performance period is five years with no options, and annual demand is estimated at 200 pouches, with each delivery order ranging between a minimum of 50 pouches and a maximum of 200 pouches. Production units must be delivered within 549 days, with shipments going to CONUS stock locations as specified on individual delivery orders under FOB Destination terms, including mandatory inspection at origin for DLA Direct requirements. Surge requirements do not apply. The contract will be awarded based on best value criteria, combining price, past performance, and other evaluation factors outlined in the solicitation. A reverse auction may be conducted through the Procurex platform, requiring suppliers to self-register at dla.procurexinc.com to participate. The solicitation, issued under number SPE4A726R0740 and posted on August 10, 2026, must be completed in full by offerors to be eligible for award, with responses due by September 21, 2026. All documents are available exclusively via the DIBBS Internet Bid Board System, and no paper copies will be provided. The contracting office is DLA Aviation in Richmond, Virginia, with Xuan Thanh Phan listed as the primary point of contact for inquiries.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

DEADLINE

Communication Control Console Supplier

Other Communications Equipment Manufacturing

POSTED

DEADLINE

Supply of Sargent Aerospace & Defense Component (P/N 02-0067-6-90 / 23101)

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Supply of Stator Assembly, Pump (NSN 2915-00-449-9118)

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Supply of Structural Aircraft Aluminum Plates

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Supply of Conductor Splices (NSN 5940011357096)

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Kit Assembly and Logistics (Integration)This subcontract, titled Kit Assembly and Logistics (Integration), involves the supply of final assembled parts kits for prime contractors fulfilling DLA supply contracts. The scope of work includes the kitting and assembly of individual turbine components, the application of markings per MIL-STD-129 using specialized equipment, and final packaging for shipment. The specific deliverable consists of 21 completed, marked, and packaged Cooling Turbine Parts Kits. The contract is managed by the Department of Defense under the ASC Supplier OE and AF Div, with the place of performance located at Tinker AFB. It falls under NAICS code 339999 and was posted on September 3, 2026, with a response deadline of September 9, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Precision Component Manufacturing (Casting & Forging)This subcontract for Precision Component Manufacturing focuses on the primary fabrication of turbine kit components to support DLA supply contracts. The scope of work involves developing tooling and molds, performing metal casting or forging, and executing rough machining to achieve near-net shapes for components adhering to technical specifications for NSN 1660-01-161-9773. The project requires specialized industrial capabilities, including casting furnaces, forging presses, and custom tooling, to deliver rough or semi-finished metal parts. The contract is managed by the Department of Defense under the ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. It falls under NAICS code 331210. The solicitation was posted on September 3, 2026, with a response deadline of September 9, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

DEADLINE

Supply of Hydraulic Servovalves (NSN 1650005128520)

Power-Driven Handtool Manufacturing

POSTED

DEADLINE

Aerospace Packaging and Palletization Services

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE