Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Machining and Finishing of Hydraulic Manifolds

Active

Federal

Response Deadline11/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Precision Machining and Finishing of Hydraulic Manifolds, is a Service-Disabled Veteran-Owned Small Business set-aside for the DLA Weapons Support Fluid Handling Division. The project requires the final machining, drilling, and threading of forged manifold blanks to meet TDP Rev B Gen 2 specifications, with specific finishes applied per 16H213 W/PL and 16Z001 W/PL. The final deliverable consists of 77 finished and inspected hydraulic system manifolds to be performed at Hill AFB. Compliance is a critical component of this contract, requiring the contractor to maintain CMMC Level 2 certification and adhere to ITAR regulations. Additionally, all parts must meet MIL-STD-130 marking requirements. The solicitation was posted on October 20, 2026, with a response deadline of November 2, 2026, under NAICS code 332710.

General Info

SDVOSB contract for machining 77 hydraulic manifolds at Hill AFB per TDP specifications.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

332710 - Machine Shops

Place of Performance

HILL AFB, UT, 84056-5734, USA

Set-Aside

SDVOSBC

Documents

This scope was carved out of SPE7M3-27-T-0553.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

MANIFOLD, HYDRAULIC SYS

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 20

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 05:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs final machining, drilling, and threading on forged manifold blanks for prime contractors on DLA Weapons Support Fluid Handling Division projects. Machines parts to TDP Rev B Gen 2 specifications and applies finishes per 16H213 W/PL and 16Z001 W/PL. Requires CMMC Level 2, ITAR compliance, and MIL-STD-130 marking. Delivers 77 finished, inspected hydraulic system manifolds.

Similar Contracts

Same NAICS industry code

Supply of RIGHT SIDE TRAVEL C ComponentsThis HUBZone set-aside subcontract involves the manufacture or sourcing of 57 units of RIGHT SIDE TRAVEL C hardware for prime contractors supporting Department of Defense supply contracts. The selected provider must ensure all components are produced in strict accordance with the Technical Data Package and meet all specified technical and quality requirements before delivery to the designated DLA location. The project is managed under the DDSP New Cumberland Facility with performance taking place in New Cumberland, Pennsylvania. The procurement falls under NAICS code 332710, and interested parties must adhere to the response deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

Nickel Copper Pipe-to-Tube Adapters SupplyThis subcontract involves the manufacture and supply of four nickel copper pipe-to-tube adapters for the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The adapters must feature a 1 inch OD tube to 3/4 inch nominal pipe size and be rated for 3000 PSI. Additionally, the contractor is required to package brazing rings separately using MIL-B-117 bags. Performance will take place in San Diego, California, under NAICS code 332710. To be eligible, the provider must maintain CMMC Level 2 certification and ensure full compliance with DFARS 252.223-7001. The response deadline for this requirement is November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

Supply of NSN 5330015884018 (Hardware Component)This subcontract involves the supply of 32 units of hardware component NSN 5330015884018 for prime contractors under DLA supply contracts. The Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support, requires these parts to be manufactured or sourced in strict accordance with TDP Rev A Gen 2, Basic Drawing NR 19200 13023333, and Reference Drawing NR 19200 12579607. Notably, the use of additive manufacturing is prohibited unless prior approval is granted by the ESA. The contract specifies that all items must be packaged according to MIL-STD-2073-1E and delivered FOB Origin. Performance for this requirement is located in New Cumberland, Pennsylvania, under NAICS code 332710. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 14 hours ago

DEADLINE

Supply of Flared Tube Fitting SleevesThis subcontract involves the manufacture or procurement of 225 flared tube fitting sleeves for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The contractor is responsible for ensuring all units meet the precise specifications for the designated part number and adhere to strict logistics standards, including ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization. Performance of this contract will take place at Robins Air Force Base. To be eligible, the provider must maintain a valid Unique Entity Identifier and CAGE code. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026, falling under NAICS code 332710.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

Manufacturing and Supply of Shoulder Pins (NSN 5315008966645)This subcontract involves the manufacturing and supply of 10 precision-machined shoulder pins, specifically identified as NSN 5315008966645, for the Department of Defense via the DLA Weapons Support ASC. The project requires the fabrication of these components using CNC machining equipment and traditional subtractive or formative manufacturing processes, with a strict prohibition on the use of additive manufacturing. The selected provider must ensure full compliance with the Buy American Act and NIST SP 800-171 security standards. Performance for this contract will take place in New Cumberland, Pennsylvania, with a response deadline set for November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

Manufacturing and Supply of Rotary Pump Wear PlatesThis subcontract involves the manufacturing and supply of five precision-machined rotary pump wear plates for the DLA Weapons Support Maritime Supply Chain. The components must be fabricated according to NSN 4320-01-027-2306 using CNC milling and grinding processes to ensure exact tolerances are met. All deliverables must comply with domestic material disclosure standards and DLA Packaging Requirement RP001. The contract is categorized under NAICS code 332710 and requires delivery within 166 days after the order is placed. Performance for this Department of Defense requirement will take place in Tracy, California.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

Manufacture of Magazine Catch DetentsThis subcontract with the Department of Defense, specifically DLA Weapons Support LSO Combat Vehicles and Armament, involves the production and supply of precision-machined magazine catch detents for prime contractors. The components must be manufactured using CNC machining or milling in strict accordance with Basic Drawing NR 30003 3392AS996 and NSN 1005015702446. The scope of work requires the delivery of three finished units and five PVT samples, with the latter intended for government testing and validation. Performance for this contract is based in New Cumberland, Pennsylvania, under NAICS code 332710.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 14 hours ago

DEADLINE

Supply of Adjusting PlugsThis subcontract involves the supply of 16 specialized adjusting plugs, identified by NSN 1005-13-116-2696, for prime contractors supporting DLA supply contracts. The project is managed under the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The contractor must ensure all items adhere to strict military specifications, including packaging data MIL-STD-2073-1E and marking requirements per MIL-STD-129. Additionally, the provider is required to maintain ITAR/EAR compliance and hold CMMC Level 2 certification to meet security and regulatory standards.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

Supply of Machine Components (Pins and Axes)This subcontract involves the supply of precision-machined components for prime contractors supporting Department of Defense DLA supply contracts. The scope of work requires the manufacture or sourcing of 55 belt feed slide pins and 30 fixing pawl axes, specifically identified by NSN 1005-13-116-2130 and NSN 1005-13-116-2062 respectively. All components must be produced according to provided technical data, with marking and packaging adhering to MIL-STD-129, MIL-STD-2073-1E, and RP001 standards. The contract is managed by the DDSP New Cumberland Facility and falls under NAICS code 332710. Due to the nature of the components, the provider must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for November 4, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

TDP Component Supply for M160 CaseThis subcontract, titled TDP Component Supply for M160 Case, involves the manufacture and supply of precision-machined components for prime contractors supporting DLA Troop Support projects. The scope of work requires the production of specific piece numbers identified in reference drawings 12753476 through 12753492, adhering strictly to TDP Rev A Gen 2 specifications. The contract is managed under NAICS code 332710 for the Department of Defense. Key requirements include the provision of full material certifications for all delivered individual components. Due to the nature of the restricted drawings, the supplier must maintain strict ITAR and EAR compliance. The solicitation was posted on October 29, 2026, with a response deadline of November 5, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 14 hours ago

DEADLINE

Manufacturing and Supply of Hinge Assembly Y (NSN 2040014437732)This subcontract involves the manufacture and supply of 59 units of Hinge Assembly Y, identified by NSN 2040014437732, for prime contractors supporting the DLA Weapons Support Fluid Handling Division of the Department of Defense. The assemblies must be fabricated using precision machining equipment in strict accordance with TDP Rev C Gen 4 and Basic Drawing NR 53711 6397269, Revision B. To ensure the components meet the standards of a Critical Application Item, the provider must implement quality processes as outlined in RQ001 Tailored Higher Level Contract Quality Requirements. The work is designated under NAICS code 332710 and is to be performed in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

Valve Cap (Yoke) Manufacturing and SupplyThis subcontract involves the manufacture and supply of one Valve Cap (Yoke), identified by NSN 4820014688363 and Part Number 253871 PC 3, for prime contractors supporting Defense Logistics Agency supply contracts. The component must be produced using CNC milling and turning in strict accordance with Basic Drawing NR 43689 253871, Revision G, dated June 19, 2001, to meet critical application quality standards. The contract requires full compliance with the Berry Amendment and the Buy American Act. Performance will take place in FPO 96607, with the solicitation posted on October 29, 2026, and a response deadline of November 9, 2026.

Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

First Article Test (FAT) SpecialistThis subcontract involves providing First Article Testing services for the Department of Defense, specifically under the DLA Weapons Support Fluid Handling Division. The selected specialist will be responsible for conducting compliance testing on the first production unit of NSN 4720016501591 to ensure it meets all technical specifications. This process requires the use of specialized pressure and material durability testing equipment to verify the integrity of the component. The contractor is tasked with documenting all test results and coordinating the final approval process with the DLA. Key deliverables include a comprehensive First Article Test Report and a formal certification of approval. The work is designated for performance in New Cumberland, Pennsylvania, under NAICS code 331315, with a response deadline of November 9, 2026.

Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supplier of Air Duct Hose (NSN 4720-01-650-1591)This subcontract involves the supply of 11 units of Air Duct Hoses, specifically NSN 4720016501591, for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The selected supplier is responsible for manufacturing or sourcing the hoses, ensuring all items are marked according to MIL-STD-129, and completing palletization and packaging in strict adherence to RP001 DLA Packaging Requirements. To facilitate delivery and payment via WAWF, the supplier must maintain an active SAM registration and a valid CAGE code. The performance of this contract will take place in New Cumberland, Pennsylvania, with a response deadline set for November 9, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Connecting Rod RH (NSN 2040014428433)This subcontract involves the manufacture or sourcing of 42 units of Connecting Rod RH, identified by NSN 2040014428433, to support prime contractors for the DLA Weapons Support Fluid Handling Division. The project requires strict adherence to packaging and marking standards, specifically RP001, MIL-STD-2073-1E, and MIL-STD-129. Additionally, the provider must ensure full compliance with DFARS regulations 252.204-7012, 252.223-7008, and 252.225-7007. The final delivery of all 42 units is required by July 16, 2027. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 336350. The procurement process was initiated by the Department of Defense with a response deadline of November 9, 2026.

Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 14 hours ago

DEADLINE

Nonmetal Hose Assembly SupplierThis subcontract involves the supply of nonmetal hose assemblies for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The selected supplier is responsible for manufacturing or sourcing hose assembly NSN 4720008340512, ensuring all materials are compliant with the specified NSN and that the company maintains an active SAM registration. The scope of work includes the delivery of one packaged and palletized nonmetal hose assembly to Fort Worth, Texas. All deliverables must strictly adhere to MIL-STD-129 for packaging and marking, as well as RP001 DLA Packaging Requirements for palletization. The response deadline for this opportunity is November 9, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 14 hours ago

DEADLINE

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports prime contractors on Defense Logistics Agency supply contracts under the DLA Weapons Support Fluid Handling Division. The scope of work involves specialized packaging, marking, and palletization of items to ensure they are ready for transport to designated DoDAACs. All operations must strictly adhere to ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization, utilizing industrial labeling systems and MIL-SPEC materials. The performance of these services will take place in Buzzards Bay, Massachusetts. Interested parties should note that the response deadline is November 9, 2026, and the work falls under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 14 hours ago

DEADLINE

Metal Pipe Assembly SupplierThis subcontract involves the manufacture or sourcing of one Metal Pipe Assembly, identified by NSN 4710015413878, for prime contractors supporting the Defense Logistics Agency Weapons Support Fluid Handling Division. The supplier must ensure that all materials and assembly tools comply with the DLA Master List of Technical and Quality Requirements to meet strict technical specifications. The project falls under NAICS code 332311 and will be performed in Buzzards Bay, Massachusetts. Interested parties must respond by November 9, 2026, to provide the completed assembly as required by the Department of Defense.

Prefabricated Metal Building and Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Straight Adapters (NSN 4730-01-715-8211)This subcontract with the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division, requires the procurement of 18 straight adapters identified by NSN 4730-01-715-8211. The contractor is responsible for manufacturing or sourcing these units in strict accordance with the DLA Master List technical and quality requirements. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332999. Critical compliance mandates include packaging and labeling according to MIL-STD-129 and RP001 standards. Additionally, the contractor must certify that no Class I ozone-depleting chemicals are utilized during the production process. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Nonmetallic Hose Assemblies (NSN 4720-01-414-1246)This subcontract involves the manufacture or procurement of 24 nonmetallic hose assemblies matching NSN 4720-01-414-1246 for the DLA Weapons Support Fluid Handling Division. The selected provider is responsible for ensuring all units are properly packaged and labeled, with specific adherence to the Hazard Communication Standard for any applicable hazardous materials. The completed assemblies must be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. This requirement falls under NAICS code 334418 and is intended for prime contractors fulfilling Department of Defense supply contracts.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Nonmetallic Hose Assemblies (NSN 4720012681978)This subcontract involves the manufacture or sourcing of three nonmetallic hose assemblies, identified by NSN 4720012681978, for prime contractors working on DLA Weapons Support fluid handling projects. All deliverables must strictly comply with the specifications set by the DLA Fluid Handling Division, and logistics will be managed through the First Destination Transportation program. The project is managed by the Department of Defense under the DLA Weapons Support Fluid Handling Division, with the place of performance located in Jacksonville, Florida. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026, falling under NAICS code 339113.

Surgical Appliance and Supplies Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Non-Metallic Hose Assembly (NSN 4720-01-722-8134)This subcontract involves the manufacture or sourcing of two non-metallic hose assembly units, specifically NSN 4720-01-722-8134, for prime contractors supporting DLA supply contracts. The finished products are destined for the Naval Submarine Support Facility in Groton, Connecticut, and must strictly adhere to the DLA Master List technical requirements. Compliance is mandatory regarding packaging and marking standards MIL-STD-2073-1E and MIL-STD-129. Additionally, the provider must maintain SAE AS9100 quality certification and ensure full conformance with FAR 52.246-15. The contract is managed under the DLA Weapons Support Fluid Handling Division of the Department of Defense.

All Other Plastics Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

Specialized Defense Packaging and Marking ServicesThe Specialized Defense Packaging and Marking Services subcontract involves providing final packaging, marking, and shipment preparation for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The selected provider must ensure all markings adhere to MIL-STD-129 and that packaging follows RP001 DLA Packaging Requirements using compliant industrial materials. Additionally, the contractor is responsible for preparing all necessary hazardous material documentation to ensure components are shipment-ready and capable of passing DLA inspection. This opportunity is categorized under NAICS code 488410 and is associated with the Department of Defense. Performance of the contract will take place in Silverdale, Washington. Interested parties should note the response deadline of November 9, 2026, for this specific defense logistics requirement.

Motor Vehicle Towing

POSTED

about 14 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Precision Manufacturing of Clamp, Edge, Mating (NSN 5680-01-445-6865)

DDSP NEW CUMBERLAND FACILITY

POSTED

CLOSED

Manufacture of Spacer Plates (NSN 5365-01-703-0408)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

CLOSED

Supply of Sleeve Bushings (NSN 3120009369607)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

CLOSED

Fabrication of Camera Mounting Brackets (NSN 5340-01-678-5422)

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Lower Bushing Manufacturing (P/N 114R1774–2)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

CLOSED

Supply of Bushing, Sleeve (NSN 3120-01-741-5457)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

CLOSED

Precision Machined Rotor and Shaft Components

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Precision Machining of Shouldered Shafts (NSN 3040005099269)

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Precision Component Fabrication

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

CLOSED

Quick Release Pin Supplier

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

CLOSED

Manufacturing of Packing Nut (NSN 4730014813298)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Heatshield Stiffener Fabrication

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS