This Government Contract opportunity from Department Of Defense was posted on May 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Precision Machining and Finishing Services

Closed

Federal

Submission Closed05/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332722

New

SLED

Electrical Connectors & FastenersThis subcontract for Electrical Connectors and Fasteners supports prime contractors working on Nebraska Public Power District projects. The scope of work involves the delivery of high-conductivity terminals and assembly hardware, specifically solderless compression ring terminals made from copper or aluminum alloy preloaded with non-oxidizing inhibitor. Additionally, the contract requires the provision of stirrups and 18-8 stainless steel assembly bolts equipped with silicon bronze hex nuts. All provided materials must adhere to Build America, Buy America (BABA) compliance standards. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 6, 2026. The contract falls under NAICS code 332722 and focuses on the essential supply of specialized electrical fasteners and connectors for regional power infrastructure.

Nebraska Public Power District

POSTED

DEADLINE

Supply of Round Plain Nuts (NSN 5310-00-839-1524)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the supply of 84 round plain nuts identified by NSN 5310008391524. The hardware must strictly adhere to the DLA Master List of Technical and Quality Requirements and be delivered via FOB Origin to Cherry Point by April 3, 2028. To be eligible, contractors must provide a valid CAGE code and UEI, and they must certify that no covered defense telecommunications equipment is used in accordance with FAR 52.204-24. The opportunity falls under NAICS code 332722, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supplier of Flat Washers (NSN 5310-01-097-9936)This subcontract involves the procurement of 109 specialized flat washers to support Defense Logistics Agency aircraft component projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with Sikorsky Aircraft Corporation part number SS5104-01 and NSN 5310-01-097-9936. All items must be delivered to DLA Distribution DDSP New Cumberland. The contract mandates rigorous adherence to quality and regulatory standards, including compliance with the Buy American Act and the Berry Amendment. Packaging must meet ASTM D3951 specifications, while marking and palletization must follow MIL-STD-129 and RP001 guidelines. The opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Close Tolerance Screw Manufacturing (NAS7802U3)This subcontract involves the manufacture of 116 close tolerance screws, part number NAS7802U3, for the DLA Weapons Support ASC Commodities Division. The fabrication process requires precision CNC machining in strict accordance with National Aerospace Standard 80205 and TDP Rev A Gen 1. Quality control must be maintained through sampling per MIL-STD-1916 or ASQ H1331, and the final products must adhere to Buy American requirements and MIL-STD-2073-1E packaging standards. The project is categorized under NAICS code 332722 and will be performed in New Cumberland. Interested parties should note the response deadline of November 5, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Multiple Angle Sensor BracketsThis subcontract with the Department of Defense, specifically the DLA Weapons Support Land Supply Chain, involves the manufacture or procurement of Multiple Angle Sensor Brackets under NSN 5340016076959. The contractor is responsible for supplying 12 units of these specialized hardware brackets to prime contractors, with a strict delivery requirement of 5 days from the date of order. Performance for this contract is based in Anniston. Compliance with specific military and industry standards is mandatory, requiring all non-hazardous materials to be packaged according to ASTM D3951 and all shipments to be labeled per MIL-STD-129. The opportunity falls under NAICS code 332722 and was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Machine Screws (NSN 5305-01-406-9165)This subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the procurement and delivery of machine screws identified by NSN 5305-01-406-9165. The contractor is responsible for supplying these fasteners to prime contractors for various defense projects, with physical delivery to designated government locations, including Cherry Point. Logistics for the delivery of these parts are handled through the First Destination Transportation program. Strict manufacturing and sourcing compliance is required for this contract. All parts must be produced without the use of additive manufacturing processes and must adhere to the domestic material restrictions set forth by the Berry Amendment and the Buy American Act. The opportunity is categorized under NAICS code 332722, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supplier of Self-Locking Plate Nuts (NSN 5310-01-669-4613)This subcontract involves the supply of 155 self-locking plate nuts, identified by NSN 5310-01-669-4613, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing components that strictly adhere to Boeing part number BACN10TL3A6 and DLA Master List requirements. Performance will take place at Tinker AFB, with all units required to be packaged according to MIL-STD-2073-1E and MIL-STD-129 standards. To ensure quality and security, the contractor must maintain ISO 9001:2015 certification and demonstrate compliance with NIST SP 800-171. All delivered hardware must undergo sampling and inspection in accordance with MIL-STD-1916 or ASQ H1331. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Spring Pins (NSN 5315-01-599-0440)This subcontract involves the sourcing or fabrication of two spring pins under NSN 5315-01-599-0440 for prime contractors delivering to the Defense Logistics Agency Weapons Support LSO Combat Vehicles and Armament. The selected provider must ensure all components adhere to the DLA Master List of Technical and Quality Requirements and maintain domestic origin. Additive manufacturing processes are strictly prohibited unless specific authorization is granted. The project falls under NAICS code 332722 and will be performed at Camp Pendleton, California. Interested parties must respond by November 9, 2026, to fulfill the requirements of the Department of Defense.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supply of Pin Straight Headless (NSN 5315015261934)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Wiring Harness Manufacturing and IntegrationThis subcontract opportunity with the Department of Defense, specifically the DLA Weapons Support ASC, involves the manufacturing and integration of wiring harness bracket assemblies for prime contractors. The scope of work includes cutting, stripping, crimping, and routing military-grade wiring in accordance with TDP Rev C Gen 3, as well as performing continuity testing for First Article Testing. Eligible bidders must be small businesses and maintain strict certifications, including ISO 9001:2015, ITAR/EAR compliance, US/Canada Joint Certification, and CMMC Level 2. The solicitation was posted on October 28, 2026, with a response deadline of November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Flat Washer Supplier (NSN 5310009501403)This subcontract involves the procurement of 9,090 flat washers to support the DLA Weapons Support Nuclear Reactor Program for the Department of Defense. The hardware must be manufactured or sourced in strict accordance with NSN 5310009501403, NASM15795 Revision 3, and FF-W-92C(3) Revision C. All materials provided must be mercury-free, and the supplier is required to maintain compliance with DFARS 252.204-7012. Quality control must be performed according to MIL-STD-1916 or MIL-STD-105/ASQ Z1.4, with packaging and labeling adhering to MIL-STD-2073-1E and MIL-STD-129. The place of performance is designated as Tinker AFB. Interested parties must respond by November 9, 2026, under NAICS code 332722.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of Blind Rivets (NSN 5320-01-032-8075)This subcontract involves the supply of blind rivets specifically meeting NSN 5320-01-032-8075 specifications to support prime contractors for the Defense Logistics Agency Weapons Support ASC Commodities Division. The selected provider is responsible for the manufacture or procurement of the rivets, as well as performing all necessary quality assurance and packaging to ensure the items are ready for shipment to designated destination acceptance points. The contract falls under NAICS code 332722 and requires the physical delivery of the rivets by the specified delivery date. Interested parties should note that the response deadline for this opportunity is November 5, 2026.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

in 8 days

AI Contract Overview

This contract involves precision machining, heat treatment, and surface finishing services, including processes such as anodizing and plating, specifically for towbar components. The goal is to ensure that these components meet strict dimensional requirements and durability standards. The subcontract is issued by the Department of Defense under the NAICS code 332722, which corresponds to metal coating, engraving, heat treating, and allied activities. Work is to be performed at Tinker Air Force Base with a zip code of 73145-8000. The solicitation was posted on May 22, 2026, with responses due by May 28, 2026. Although specific details about set-asides and organization types are not provided, the contract is targeted as a subcontract opportunity within the construction and equipment manufacturing sector. The link to the solicitation is hosted on the Defense Logistics Agency’s bidding system.

General Info

Subcontract for precision machining, heat treatment, and finishing of towbar components at Tinker AFB.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8EF-26-T-1129.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TOWBAR, AIRCRAFT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedMay 22

subcontract

Response DeadlineMay 28

Deadline has passed

Submission Closed

05/28/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Office AddressN/A

ContactsNo contact information available

Full Description

Precision machining, heat treatment, and surface finishing (e.g., anodizing, plating) of towbar components to meet dimensional and durability specifications.