Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Machining of Aerospace Cylinder Assemblies

Active

Federal

Response Deadline08/14/2026, 04:59:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the precision machining of metal cylinder assemblies for aerospace applications, specifically focusing on high-tolerance CNC operations including turning, milling, and finishing processes required for hydraulic and pneumatic actuators. These components must meet stringent aerospace standards for dimensional accuracy, surface finish, and material integrity, ensuring reliable performance under extreme operational conditions. The work is classified under NAICS code 332722 and is designated as a Small Business Set Aside under the SBA, meaning only small businesses are eligible to bid. The opportunity was posted on August 6, 2026, with a firm deadline for responses on August 14, 2026, at 4:59 p.m. Eastern Time. It is structured as a subcontract under the Department of Defense, managed by the Ok DLA Aviation office in Oklahoma City. Although specific location details for performance or contact information are not provided, the solicitation is accessible through the official SAM.gov portal, and interested small businesses must comply with federal subcontracting regulations and aerospace quality assurance requirements.

General Info

Small business set aside for aerospace CNC machining of metal cylinders under DoD subcontract, due August 14, 2026.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma CityView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

OK, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 6

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 04:59:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

High-tolerance CNC machining of metal cylinder components such as hydraulic or pneumatic actuators for aerospace applications, including turning, milling, and finishing operations.

Similar Contracts

Same NAICS industry code

Solicitation # SPMYM426Q3625

The solicitation for screws, identified by number SPMYM426Q3625, is a Small Business Set Aside with a NAICS code of 332722, exclusively open to small businesses as defined by the SBA. Offers must be submitted by August 11, 2026, under the Lowest Price Technically Acceptable evaluation method, meaning the lowest responsive bid that meets all technical requirements will be selected. Vendors must complete the HMDRFQINFO form found on pages 27–30 of the solicitation and accurately declare their business size, including any applicable small business designations such as SDB, VOSB, WOSB, SDVOB, HUBZONE, or 8a. Contractors must indicate whether they are quoting as the manufacturer or as an authorized distributor or third-party dealer, and confirm their independence to set prices. Shipping must be FOB destination to Pearl Harbor Naval Shipyard, with delivery estimated in calendar days, and the CAGE code and country of manufacture must be provided. All bids will be screened for responsibility using PPIRS and FAR 9.104 criteria. The delivery address is DLA Distribution at Building 167-1, Receive 808-473-8000 X4961, Pearl Harbor, HI 96860-5033. Primary point of contact is Quincey Dillenback, reachable via email at quincey.dillenback.civ@us.navy.mil, with general inquiries directed to distrcustomerservice@dla.mil.

DLA Maritime - Pearl Harbor

POSTED

about 20 hours ago

DEADLINE

53--BOLT,MACHINE

Solicitation # N0038326QFB32

The U.S. Navy’s Naval Supply Systems Command Weapon Systems Support is seeking to procure 19 machine bolts under NSN 1R-5306-016668961-H5 and part number 513-004-00 on a sole source basis due to insufficient, inaccurate, or illegible data in government records that would allow for competitive sourcing. Delivery is FOB origin, and the items are subject to both the World Trade Organization Government Procurement Agreement and applicable Free Trade Agreements, necessitating Government Source Approval prior to award. Because the approval process for new sources would delay the award beyond acceptable timelines, only currently approved sources may submit proposals. Prospective offerors who are not already approved must include all required documentation outlined in the NAVSUP WSS Source Approval Brochure with their submission; incomplete submissions will be disqualified. The solicitation, designated N0038326QFB32, was posted on August 7, 2026, with responses due by September 11, 2026. The contract will be awarded by the office located in Philadelphia, Pennsylvania, and inquiries should be directed to Casey M. Brown at the provided email address.

Navsup Weapon Systems Support

POSTED

about 20 hours ago

DEADLINE

in about 1 month

NSN 5306-01-317-4318, BOLT, CLOSE TOLERANCE - 40A / HELICOPTER, BLACK HAWK UH-60A, UH-60L, HH/UH-60M, UH-60V

Solicitation # SPE4A626R0296

The Defense Logistics Agency Aviation in Richmond is conducting market research to identify potential qualified sources for the close tolerance bolt with NSN 5306-01-317-4318, a critical component used on Black Hawk helicopters including the UH-60A, UH-60L, HH/UH-60M, and UH-60V models. Currently, Avibank Mfg., Inc. and Space-Lok, Inc. are the approved sole source suppliers with part numbers AS616-102 and SLB163-102 respectively. This notice serves purely as an informational solicitation for market research and is not a request for proposals, nor does it obligate the government to award any contract. Responses are voluntary, and no funding is available to cover the costs of preparation or submission. Interested manufacturers or suppliers capable of producing or legitimately obtaining the item may submit information by August 11, 2026, to be considered for future qualification as an approved source. To be formally evaluated as an approved supplier, companies must submit a complete Source Approval Request package in accordance with the JACG SAM HB guidelines, demonstrating that their product meets or exceeds the quality and performance standards of the existing approved items. The SAR package must include all necessary technical data to prove equivalency or superiority. For items without an active solicitation, submissions must be sent directly to the DLA SAR Program Office at the Richmond address. The primary point of contact for inquiries is April Wynn, Acquisition Specialist, reachable at the provided phone number and email. The solicitation is posted under number SPE4A626R0296 with a NAICS code of 332722, and the response deadline aligns closely with the notice's submission window, reflecting a structured yet open process for expanding the supplier base while ensuring strict adherence to quality and specification requirements.

POSTED

about 20 hours ago

DEADLINE

NUT,PLAIN,HEXAGON

Solicitation # N0010426QFE00

This contract pertains to the procurement of plain hexagon nuts designated as Special Emphasis Level I material for critical shipboard systems, where failure could result in catastrophic consequences including loss of life or vessel. The items must strictly comply with MIL-DTL-1222 specifications, including requirements for grade 8 SAE J995 material, hardened and tempered condition, zinc plating per ASTM-B633 Type II Class 5, and specific chemical and mechanical properties. Traceability is mandatory from raw material through final product, requiring unique heat-lot markings, certified test reports, and documentation that cannot be transcribed or qualified with disclaimers. All fasteners must be marked with manufacturer ID, material symbol, and traceability code applied prior to coating using approved MIL-STD-792 methods, with full documentation maintained for inspection. The contract mandates comprehensive quality assurance under ISO-9001 or MIL-I-45208 systems, with Government source inspection rights and 100% verification of material certifications, mechanical testing, and non-destructive examination results. First Article Testing is required with a 180-day submission window and 60-day review period, and all certifications must be submitted through WAWF using specified DODAACs and email notifications prior to shipment. Hydrogen embrittlement relief is mandatory for plated fasteners exceeding specified hardness thresholds, and compliance certification must include bake times and temperatures. No rework or retesting is permitted without PCO approval, and subcontractor oversight is enforced through prime contractor audits and inclusion of contract quality clauses in all purchase orders. Delivery is capped at 365 days post-contract effective date, with all material subject to DO priority rating under DPAS and Buy American Act requirements. The solicitation is restricted to small business set-aside, with full compliance to Navy-specific data submission, waiver procedures, and configuration control processes through ECDS and ECPs.

Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPMYM4-26-Q-0833

This solicitation, identified as SPMYM4-26-Q-0833, is a combined synopsis and solicitation for Bar, Hex Nut under Federal Acquisition Regulation Part 12 and Simplified Acquisition Procedures, with no paper copies available and all information provided exclusively through SAM.gov. The requirement is set aside entirely for small businesses, with the North American Industry Classification System code 332722 and a small business size standard of 600 employees. The evaluation method is Lowest Price Technically Acceptable, and vendors must demonstrate responsibility through SPRS in accordance with FAR 9.104. All responses must be submitted via the required quote form attached to the posting, with only one quote permitted per vendor and all attachments fully completed. The contract is governed by provisions and clauses effective through FAC 2025-06 and DFARS Change Notice 20251110, and contractors are responsible for ensuring compliance with all applicable terms. The solicitation was posted on August 7, 2026, with responses due by August 12, 2026, at 2:00 a.m. Eastern Time, and the performance location is in Honolulu, Hawaii, 96840, with the contracting office based in Pearl Harbor, HI, 96860-5033. The request is managed by DLA Maritime - Pearl Harbor under the Department of Defense, and the primary point of contact is Floyd Shiroma, reachable via email at floyd.shiroma.civ@us.navy.mil. No written solicitation will be issued, and failure to submit a complete and single response using the official form will result in rejection. All interested parties must access and comply with the full text of the referenced regulatory clauses through the provided federal databases.

DLA Maritime - Pearl Harbor

POSTED

about 20 hours ago

DEADLINE

NAWCAD WOLF - Intent to Sole Source for Turnlocks & Eccentric Pins

Solicitation # N0042126P1291

The U.S. Navy’s Naval Air Warfare Center Air Division is issuing a sole-source solicitation, N0042126P1291, to procure Eccentric Pins with part number CA4480-4 and Turnlocks with part number CA1711 from Howmet Global Fastening Systems under Federal Acquisition Regulation Part 13.106-1(b), bypassing competitive bidding due to the specialized nature of the items and the authorized sole-source relationship. All responses must be submitted via email to Maria A. Sproul no later than 1:00 PM Eastern Standard Time on August 12, 2026, and must originate from a Howmet Global Fastening Systems authorized distributor, with proof of authorization required for consideration. Submission into the SAM.gov database is mandatory for any vendor seeking award consideration, and offers must be firm-fixed-price with no adjustments permitted; the initial quote must reflect the vendor’s best and final offer both on price and technical compliance. Offerors are required to provide specific details including FOB destination, shipping costs, IUID labeling status, Tax ID, Unique Entity ID, CAGE code, small business status, estimated delivery date, and a copy of any applicable pricelist, along with a total quoted amount. The procurement carries no set-aside classification and is designated for large businesses, with performance anticipated at Saint Inigoes, Maryland, near the specified delivery point 20684-4013. While the notice is published as a sole-source intent, the government reserves the right to evaluate any submitted quotes to determine whether future competition is warranted, although no reimbursement will be provided for the submission of information. The contract award, if made, will be based solely on the data received by the deadline and within the parameters of authorized noncompetitive acquisition authority.

Naval Air Warfare Center Air Division

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPMYM426Q3629

The solicitation for screws, identified as SPMYM426Q3629, is a Small Business Set Aside under NAICS code 332722, exclusively open to small businesses as defined by the SBA. Proposals must be submitted by August 11, 2026, at 10:00 PM ET, and will be evaluated using the Lowest Price Technically Acceptable method, meaning the lowest responsive offer meeting all technical requirements will be selected. Vendors must complete the HMDRFQINFO form found on pages 29–31 of the solicitation and accurately disclose their business size, including options such as Small, Small-Disadvantaged, Veteran-Owned, Women-Owned, or HUBZone status. Contractors must indicate whether they are quoting as the manufacturer or as an authorized distributor or third-party dealer and confirm their independence in pricing. The CAGE code must be provided, along with the country of origin and estimated delivery time to Pearl Harbor Naval Shipyard, with FOB Destination terms applying. Deliveries are to be made to the specified DoDAAC N32253 at Building 167-1, Recv, 667 Safeguard Street, Pearl Harbor, HI 96860-5033. Vendor responsibility will be assessed via PPIRS in accordance with FAR 9.104, and all responses must be submitted through the SAM.gov portal. Primary point of contact is Quincey Dillenback, with additional support available through DLA Distribution’s customer service line and email.

DLA Maritime - Pearl Harbor

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE4A6-26-R-XA86

This contract solicits the procurement of 358 machine bolts with NSN 5306-01-096-5596 under solicitation number SPE4A6-26-R-XA86, issued by the Defense Logistics Agency’s Commodities Division under the Department of Defense. The delivery deadline is set at 736 days after contract award, with responses due by August 18, 2026. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging, inspection at origin, configuration change management, and export control of technical data are strictly governed by specific DLA requirements including RQ002, RQ009, and RQ032. The technical data associated with this item is subject to ITAR or EAR, and its disclosure to foreign persons—even within the United States—is prohibited without prior authorization. Contractors must be approved by DLA, hold valid US/Canada Joint Certification Program status, and have completed mandatory training and questionnaire compliance to access export-controlled data. Documentation for source approval, removal of government identification from non-accepted items, and bare item marking are required. The point of contact for inquiries is Ashley Hardy, reachable via email and phone.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

NUT,HEX,5/8 X 18, GRD. 8, ZINC,YELLOW (PKG OF 10) - ref 2100190

Solicitation # 2100190

A solicitation has been issued by Dallas Area Rapid Transit for 5/8 inch by 18 thread hex nuts, Grade 8, zinc-plated in yellow, sold in packages of ten, identified by reference number 2100190. The items are standard industrial fasteners designed for high-torque applications requiring increased strength and corrosion resistance, with the yellow zinc coating providing both protective and visual identification qualities. The solicitation was posted on August 6, 2026, with a response deadline of August 11, 2026, at 7:00 PM Eastern Time, indicating a narrow window for submissions from qualified suppliers. All performance related to this contract will occur within the state of Texas, and the procurement is managed directly under the agency’s procurement portal, with no set aside designation or NAICS code specified, suggesting it is open to general commercial suppliers without restrictions based on size, location, or small business status. The opportunity is accessible online via the DART BonfireHub portal for submission and further details.

Dallas Area Rapid Transit

POSTED

DEADLINE

Precision Machining & Metal Fabrication of Kit ComponentsThe contract calls for the manufacture of precision metal components such as tools, brackets, fasteners, and hardware intended for inclusion in a tool kit, requiring advanced CNC machining and compliance with military workmanship standards. The work includes surface finishing, plating, and other related processes to ensure durability, dimensional accuracy, and functional reliability under demanding operational conditions. All items must meet strict quality benchmarks expected in defense and federal applications, with attention to material specifications, tolerances, and finish consistency. This is a Small Business Set Aside subcontract under NAICS code 332722, reserved exclusively for small businesses, and is managed by the General Services Administration’s Supply Chain Management Contracting Division. Responses are due by August 10, 2026, at 9:00 PM, with the work to be performed in Kansas City. The opportunity was posted on August 6, 2026, and is accessible through the SAM.gov portal, though no specific point of contact is listed. The contract emphasizes domestic production capabilities and adherence to federal procurement guidelines for small business participation.

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

DEADLINE

53--LOCK SET,MORTISE

Solicitation # SPE7L126T940Q

The procurement seeks six mortise lock sets identified by NSN 5340016100484, with delivery required to DLA District San Joaquin under the W1A8 designation and a delivery timeline of 77 days after award. The only approved source for this item is 14966 56-ELLLHRB-25, and no specifications, plans, or drawings are available to prospective offerors. The solicitation is issued as an RFQ with electronic submission mandatory, and all responsible sources are invited to respond if submissions are received by the deadline. The solicitation number is SPE7L126T940Q, posted on August 6, 2026, with responses due by August 17, 2026. It falls under NAICS code 332722 and is managed by the DLA Land and Maritime office under the Department of Defense, based in Columbus, Ohio. Point of contact for inquiries is via email to DibbsBSM@dla.mil, with additional details accessible through the SAM.gov portal using the solicitation number.

DLA Land And Maritime

POSTED

DEADLINE

NUT,HEX,SELF-LOCKIN

Solicitation # N0010426QFE05

This contract mandates the supply of self-locking heavy hex nuts designated as Special Emphasis Level I material, critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The material must conform to MIL-DTL-32258 with specific chemical and mechanical requirements tied to QQ-N-281 Class A or B, and the self-locking element must comply with ASTM-D6456 or ASTM-D4066 depending on temperature rating. Traceability is strictly enforced through unique heat-lot markings on each component and mandatory certification documentation that must directly link to the physical item, with no transcription permitted. All certifications must include full compliance statements signed by authorized personnel, with disclaimers strictly prohibited. Quality assurance systems must comply with ISO-9001, ISO-10012, and ISO/IEC 17025 or an acceptable alternative including MIL-I-45208 and MIL-STD-45662, subject to government audit at source. First Article Testing requirements are satisfied through prior qualification data or letters from qualified sources, and all material must undergo 100% inspection for traceability marking, certification completeness, and nondestructive testing results. Delivery is governed by a strict schedule requiring certification data submission 20 days prior to shipment and formal acceptance by Portsmouth Naval Shipyard via the WAWF system before any material may be shipped. Final delivery must occur no later than 365 days after contract award, with the order rated DO for national defense priorities. Materials must be mercury-free, marked in accordance with MIL-STD-792, and all internal threads must be cut, not cold-formed. Subcontractor oversight, material handling procedures, and re-certification after processing are tightly controlled, and any deviation or waiver requires prior written approval from the Contracting Officer. All documentation must be submitted electronically through ECDS and WAWF, with notifications sent to designated Navy email addresses, and compliance is monitored under emergency acquisition flexibilities.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

Government Contracting Compliance and Business Certification SupportThe contract supports prime or potential prime contractors in meeting government contracting compliance requirements by assisting with the preparation of essential business representations and certifications. This includes managing small business certifications, disclosing Foreign Ownership Control or Influence (FOCI), and ensuring proper registration and maintenance of records on SAM.gov to establish and maintain eligibility for federal contracts. The services are critical for ensuring that contractors meet all procedural and regulatory obligations required by the Department of Defense, particularly in relation to the North American Industry Classification System code 541214, which corresponds to management consulting services. The opportunity is structured as a subcontract with a response deadline of August 15, 2026, and was posted on August 7, 2026. The work is associated with the Defense Logistics Agency Aviation office located in Oklahoma City, though specific performance location details are not provided. The focus is on enabling contractors to navigate the complex landscape of government contracting eligibility, ensuring they are positioned to successfully compete for and fulfill DoD contracts without delays or disqualifications stemming from incomplete or inaccurate compliance documentation.

Payroll Services

POSTED

about 20 hours ago

DEADLINE

Supply Chain and Component Sourcing for Obsolete ElectronicsThe contract pertains to the sourcing and management of electronic components that are subject to diminishing manufacturing sources, requiring proactive strategies to secure critical parts before they become unavailable. It emphasizes the handling of long-lead items to ensure timely delivery and prevent program delays, while also implementing robust measures to detect and exclude counterfeit components from the supply chain. Any substitutions for obsolete or unavailable parts must be formally coordinated and approved by government authorities, ensuring compatibility, performance, and compliance with mission-critical requirements. The effort is aligned with sustaining defense systems that rely on aging or discontinued hardware. This subcontract is issued under the Department of Defense, specifically by the Ok DLA Aviation office in Oklahoma City, with a NAICS code of 423490 indicating it falls under miscellaneous durable goods merchant wholesalers. The opportunity was posted on August 7, 2026, and responses are due by August 15, 2026, with a tight turnaround window requiring immediate attention to logistics, supplier qualification, and documentation. Performance is expected to support defense infrastructure across unspecified locations, with the contractor expected to demonstrate expertise in obsolete electronics procurement, supply chain resilience, and adherence to federal military standards for component integrity and traceability.

Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Engineering Data and Technical Documentation SupportThis contract involves the retrieval and management of engineering data including drawings and technical specifications to ensure compliance with manufacturing standards and technical accuracy for the CCA. The work must be performed using a government-provided Engineering Data Library template to maintain consistency and regulatory alignment throughout the procurement lifecycle. The subcontract is issued under NAICS code 541330 and is managed by the Department of Defense through the Ok DLA Aviation office in Oklahoma City, targeting qualified vendors capable of handling sensitive technical documentation. The opportunity was posted on August 7, 2026, with a response deadline of August 15, 2026, at 4:59 a.m., requiring timely submission of proposals to meet the procurement timeline. Performance is expected to directly support defense manufacturing requirements, with all deliverables subject to strict data integrity and compliance controls.

Engineering Services

POSTED

about 20 hours ago

DEADLINE

Circuit Card Assembly (CCA) Manufacturing and QualificationThe contract requires the manufacture of four B-2 Circuit Card Assemblies, encompassing full-scale production activities from component procurement and printed circuit board fabrication to final assembly, testing, and qualification. The vendor is responsible for ensuring all components and processes meet stringent technical and quality standards, with a mandatory requirement to submit a Source Approval Request package for government review and approval prior to proceeding with production. This ensures compliance with defense-specific sourcing and reliability requirements. The solicitation is classified as a subcontract under NAICS code 334418 and is managed by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. Responses must be submitted by August 15, 2026, at 4:59 AM, with the opportunity posted on August 7, 2026. While specific performance location and point of contact details are not provided, the work is expected to adhere to federal defense contracting standards, with deliverables subject to rigorous qualification and acceptance testing before contract completion.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 20 hours ago

DEADLINE

New Manufacture of Computer/Spoiler (NSN 6615-01-036-3198, P/N 4030470-903)The contract outlines the manufacture and qualification of the Computer/Spoiler component designated as NSN 6615-01-036-3198 with part number 4030470-903 for the B-001B platform. The work encompasses full production lifecycle activities including technical data collection, submission of a System Acceptance Report, and adherence to rigorous quality requirements specified in MQR-PSD-1 and AS9100 standards. This effort is critical to ensuring the component meets all performance, reliability, and safety criteria for its intended military application. The contract type is classified as a subcontract under the North American Industry Classification System code 334511, indicating it involves the manufacturing of electronic components and equipment. The solicitation was posted on August 7, 2026, with a firm response deadline of August 15, 2026, at 4:59 a.m. The procuring agency is the Department of Defense through the Ok DLA Aviation office located in Oklahoma City, and the work is to be performed wherever the selected subcontractor operates, with no specific geographic restrictions listed. Compliance with all applicable quality and documentation standards is mandatory, and failure to meet these requirements may result in rejection of the bid or non-compliance penalties. The contract seeks a qualified manufacturer capable of delivering a fully qualified, production-ready component in alignment with defense sector expectations.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 20 hours ago

DEADLINE

CIRCUIT CARD ASSEMB_End_Item_B-2_NSN_5998014281837FW_PN_795306-10

Solicitation # FD20302700176

The U.S. Air Force, through the 422nd SCMS at Tinker Air Force Base, is conducting market research to identify capable sources for the new manufacture of a Circuit Card Assembly with part number 795306-10 and NSN 5998-01-428-1837FW, intended for use on the B-2 platform. This effort is not a solicitation or a commitment to award a contract; no funds are available at this time, and responses are being gathered solely to assess market capabilities and determine the optimal acquisition strategy, including the potential for a Small Business Set-Aside. The requirement calls for the production of four units, encompassing full manufacturing responsibilities such as component procurement, inspection, testing, packaging, shipping, supply chain management, and handling of long-lead items and diminishing manufacturing sources, with nonrecurring engineering costs potentially borne by the vendor. The Government is seeking information from all eligible businesses, including small businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone businesses, and women-owned small businesses, using a North American Industry Classification System code of 336413 with a size standard of 1,250 employees. The response deadline is August 14, 2026, and submissions must be made through the designated email address, with vendors required to select the “Add Me to Interested Vendors” button to be considered. There is no repair component to this requirement—this is strictly a new production spares acquisition. All activities are governed by FAR Part 10, and the place of performance is Tinker Air Force Base, Oklahoma.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

SHIPPING AND STORAGE CONTAINER_End_Item_F107_NSN_8145011251478AN_PN_D5310-1

Solicitation # FD20302700183

The U.S. Air Force, through the 421st SCMS Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify potential vendors capable of manufacturing new shipping and storage containers for the F107 platform, identified by NSN 8145-01-125-1478AN and part number D5310-1. This effort, issued as a Sources Sought synopsis under Notice ID FD20302700183, is not a solicitation and does not constitute a commitment to award a contract or release funding. The government seeks information from all types of businesses, including small businesses, small disadvantaged businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone businesses, and women-owned small businesses, to assess competition and determine whether the requirement can be set aside for small business participation. The estimated spares requirement is 113 units, and vendors must demonstrate the capacity to handle full manufacturing cycles, including component procurement, inspection, testing, packaging, shipping, and supply chain management, along with addressing long-lead items and diminishing manufacturing sources. Vendors interested in participating must register via the “Add Me to Interested Vendors” button on the posting; responses sent directly without this step will not be acknowledged. The North American Industry Classification System Code is 336413, with a size standard of 1,500 employees, and the place of performance is Tinker AFB, OK 73145. The Government may consider breaking the requirement by airframe to enhance competition. Nonrecurring engineering costs associated with qualifying as an approved source may be the vendor’s responsibility. All submissions must be received by August 15, 2026, at 4:59 a.m. Central Standard Time. Responses will be used solely to evaluate market capabilities and inform future acquisition strategy; no contract will be awarded based on this market research effort.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPRTA1-26-Q-0433

The contract titled SERVOCYLINDER is solicited under number SPRTA1-26-Q-0433, with a posting date of August 7, 2026, and a response deadline of September 9, 2026, at 4:59 AM. It is classified as a combined solicitation and is associated with the NAICS code 336413, which pertains to aircraft hydraulic and pneumatic equipment manufacturing. The issuing organization is the Department of Defense through the Ok DLA Aviation office located at Tinker Air Force Base in Oklahoma City, Oklahoma, with a zip code of 73145-3070. The place of performance for this contract is in Irvine, California, with a zip code of 92606. The primary point of contact is James Maynard, reachable via email at James.Maynard.6@us.af.mil or by phone at 730-321-2262. There is no set-aside designation specified for this opportunity.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Solicitation # SPRTA126Q0345

The contract titled FILTER,FLUID is a solicitation issued by the Department of Defense through the Ok DLA Aviation office located at Tinker Air Force Base, Oklahoma, with a zip code of 73145-3070. The solicitation number is SPRTA126Q0345 and was posted on August 7, 2026, with a response deadline of September 8, 2026, at 8:00 PM. There is no set-aside designation for this opportunity, meaning it is open to all eligible contractors without restriction based on business size or category. The North American Industry Classification System code is 336412, indicating the procurement relates to aircraft engine and engine parts manufacturing. The primary point of contact is Lori Bautista, reachable via email at lori.bautista@us.af.mil or phone at 385-591-3148, with Rhonda Ehrhardt listed as the secondary contact at rhonda.ehrhardt@us.af.mil or 445-737-2449. The place of performance is designated as Oklahoma, though no specific city beyond the state is provided. The full solicitation details can be accessed through the provided SAM.gov link.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month

CONTROL BOX,ELECTRI_End_Item_B-1_NSN_1660011486207_PN_735343

Solicitation # FD20302700175

The U.S. Air Force, through the 422nd Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify potential sources for the new manufacture of the Control Box, Electri, identified by NSN 1660-01-148-6207 and Part Number 735343, for use on the B-1 platform. This effort is a Sources Sought synopsis under FAR Part 10 aimed at assessing industry capability and interest to determine whether the requirement can be procured competitively or designated as a Small Business Set-Aside, with no solicitation or contract award anticipated at this stage. The estimated requirement is for 11 units, and interested vendors must be capable of full new manufacture, including sourcing components, inspection, testing, packaging, shipping, and managing supply chain challenges such as diminishing manufacturing sources and material shortages, along with potential nonrecurring engineering costs. Responses are due by August 14, 2026, in Central Standard Time, and must be submitted via the designated email address 422.scms.afmc.rfi@us.af.mil. The North American Industry Classification System code is 336413, with a size standard of 1,250 employees, and the government welcomes participation from all business sizes, including Small Businesses, 8(a) firms, Service-Disabled Veteran-Owned Small Businesses, HUBZone businesses, and Women-Owned Small Businesses. The place of performance is Tinker Air Force Base, Oklahoma, and while no funds are available to support this market research, the information gathered will inform the future acquisition strategy for this critical spare part. Vendors must actively select the “Add Me to Interested Vendors” button to be considered in this effort.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

AUFMENTER FUEL CONTROL_End_Item_F101_NSN_2915011482108JF_PN_7113M62G01-2

Solicitation # FD20302602508

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

COMPUTER,SPOILER_End_Item_B-001B_NSN_6615010363198_PN_4030470-903

Solicitation # FD20302602515

The United States Air Force, through the Air Force Sustainment Center at Tinker Air Force Base, is conducting market research to identify qualified sources for the new manufacture of a computer spoiler component with part number 4030470-903 and NSN 6615-01-036-3198, intended for use on the B-001B platform. This effort is not a solicitation and no contract will be awarded based on responses; it is strictly for gathering market information to determine the best acquisition strategy, including whether the requirement can be competitively sourced or set aside for small businesses. The government is seeking input from all types of businesses, including small businesses, small disadvantaged businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone businesses, and women-owned small businesses, with a focus on vendors capable of managing full production cycles including component procurement, inspection, testing, packaging, shipping, and addressing supply chain challenges like diminishing manufacturing sources and long-lead items. The estimated need is for 12 units, and potential suppliers may be expected to absorb nonrecurring engineering costs to become an approved source. The procurement falls under NAICS code 336413 with a size standard of 1,250 employees and is classified under Federal Stock Class 6615. Responses must be submitted via the designated interest button on the platform prior to the deadline, and all communication should be directed to the 421st SCMS at 421scms.requirements.workflow@us.af.mil. The place of performance is Tinker AFB, Oklahoma, and all dates are in Central Standard Time. No funding is currently available, and no contract commitment is implied by this notice.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE