This Subcontract opportunity from Department Of Defense was posted on July 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Precision Machining of Aircraft Fairing Components

Closed

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332812

New

SLED

306/JB/Numbered brass tags

Solicitation # SRC0000042876

Central Ohio Behavioral Healthcare is soliciting quotes for 1,000 round solid brass tags, measuring 1.25 inches in diameter and 0.036 inches thick with a polished finish. The tags must be sequentially numbered from 1001 to 2000 using permanent engraving on one side, featuring 3/8 inch high font and a 3/16 inch center-mounted hole at the top. Finished products must be bundled in sequential groups of 50 or 100 and shipped to the agency's Columbus, Ohio address. Bidders must provide an itemized quote including shipping and contact information, and must submit their bid under a valid State of Ohio OAKS ID. The agency is tax-exempt and notes that awards may be influenced by the Ohio Revised Code Controlling Board threshold. If the items are available via an existing DAS, STS, MMA, or MCSA contract, the supplier must provide the contract number and ensure pricing consistency.

Dmh521120 Col Maintenance Tvbh

POSTED

DEADLINE

Aerospace Component Finishing and CoatingThe Aerospace Component Finishing and Coating subcontract is a Service-Disabled Veteran-Owned Small Business set-aside issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The contractor is responsible for performing surface treatments and applying aerospace-grade protective coatings to aircraft fairings for prime contractors. All work must be executed according to the Technical Data Package and military specifications, with a specific requirement to manage hazardous materials and provide documentation in compliance with FED-STD-313. The project will be performed at Robins Air Force Base, Ohio, under NAICS code 332812. The solicitation was posted on November 2, 2026, with a response deadline of November 10, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

W0113-27CS46-SOL B-Portable Laser Engraver

Solicitation # WS5953090121

The Government of Canada, through the Department of Public Works and Government Services, is soliciting bids for the procurement of a portable laser engraver under solicitation number WS5953090121. This federal opportunity is categorized under NAICS code 332812, with the place of performance located in Barrie, Canada. Interested parties must submit their responses by the deadline of November 13, 2026, at 7:00 PM. It is explicitly stated that late submissions will not be considered or accepted. For further inquiries, Samuel Ford serves as the primary contracting authority.

Department of Public Works and Government Services

POSTED

DEADLINE

Aerospace-Grade Alloy Supply for Locked-In StudsThis subcontract involves the supply of aerospace-grade alloy raw material for locked-in studs to support prime contractors on DLA Weapons Support ASC projects. The materials must strictly adhere to the chemical and physical properties defined in TDP Rev A Gen 3 and be delivered as certified raw stock. To ensure material purity and strength, the provider is required to furnish Mill Test Reports and certificates of conformance. The contract mandates full material traceability from the point of melt through final delivery in strict compliance with the Buy American Act. Managed by the Department of Defense under NAICS code 332812, the performance of this contract is centered in Tracy, California.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Intent to Sole Source Teflon Collars

Solicitation # N68520-27-RFPREQ-KN00000-0146

The Commander Fleet Readiness Center (COMFRC) intends to award a sole source Blanket Purchase Agreement (BPA) to Kamatics Corporation for the application and machining of KAron liner profile configurations for F/A-18EFG Nose Landing Gear (NLG) Steering Collars. This requirement is designated as sole source under FAR 13.106-1(b)(1)(i) because Kamatics is the Original Equipment Manufacturer (OEM) of the proprietary, trademarked KAron liner, a resin-based coating with Teflon particles. As the OEM, Kamatics exclusively possesses the technical data and intellectual property required to perform these modifications. The contractor must be a NAVAIR and Boeing approved supplier for the F/A-18E/F/G Landing Gear Program and maintain CMMC Level 1 or above compliance per DFARS 252.204-7021. The BPA consists of a twelve-month base period with the option for nine additional twelve-month extensions, not to exceed a total duration of 120 months. Performance will take place at the contractor's facility, with finished collars shipped to Fleet Readiness Center Southwest in San Diego, California. Key deliverables include a Certificate of Compliance (CDRL A001) for each collar and a detailed Field Service Report (CDRL A002). The government will evaluate the new liners at FRCSW within five business days of receipt. The agreement includes a one-year warranty on all replaced parts, covering material, labor, shipping, and handling at no additional cost to the government.

Fleet Readiness Center

POSTED

DEADLINE

NADCAP Certified Special Process TreatmentThis subcontract, titled NADCAP Certified Special Process Treatment, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Div. The project involves performing specialized aerospace treatments for prime contractors on DLA supply contracts, specifically focusing on special processes such as plating, anodizing, and heat treatment utilizing chemical baths and industrial furnaces. All work must be performed in accordance with NADCAP approval, and processed components must be delivered with a certification of compliance. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332812, with the place of performance located at Tinker AFB. The solicitation was posted on October 29, 2026, and requires a response by November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Special Emphasis Metal Bars (Alloy C63200)This subcontract involves the supply of high-criticality Nickel-Aluminum Bronze Alloy C63200 metal bars for prime contractors supporting NAVSUP Weapon Systems Support Mech projects at the Portsmouth Naval Shipyard. The scope of work requires the production of ten 1/2 inch round bars manufactured in strict accordance with ASTM-B150 and ASTM-B249 standards. To ensure quality and compliance, the provider must maintain an ISO-9001 quality system and adhere to Special Emphasis Level I control procedures. Final delivery must include Mill Test Reports and Certificates of Compliance submitted via the Wide Area Workflow system.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Physical Vapor Deposition

Solicitation # CSULB-RFP-00000846

California State University, Long Beach has issued a solicitation, identified as CSULB-RFP-00000846, for Physical Vapor Deposition services. This local government opportunity is open for responses until November 13, 2026, at 2:00 PM PT. The work is designated to be performed in Long Beach, California, within the 90840 zip code area. Interested vendors must access the official bid documents and submit their proposals through the provided third-party procurement portals. It is the responsibility of the applicant to ensure all registration requirements are met and that all relevant addenda are reviewed prior to the submission deadline. All inquiries regarding the specific language or technical requirements of the contract should be directed to the originating agency.

California State University, Long Beach

POSTED

DEADLINE

CPE CBRND Seeking Physical Vapor Deposition (PVD) of Silicon Dioxide (SiO2) on Aluminum Flakes for Screening Obscuration Module - Multispectral (SOM-M)

Solicitation # W911SR-27-R-SOMM

This Request for Information is issued by the Department of Defense to identify commercial manufacturing options for a novel bispectral obscurant material used in the Screening Obscuration Module - Multispectral program. The government is specifically seeking industry partners capable of performing high-volume Physical Vapor Deposition of Silicon Dioxide onto aluminum flakes sized between 2 and 4 microns. The goal is to find cost-effective, scalable production methods that can range from hundreds of pounds to several tons to reduce long-term sustainment costs for the military. Interested parties must submit a white paper no longer than five pages by November 13, 2026. The response should detail the proposed manufacturing approach, cost projections for scaling, facility capacity, and relevant past performance. This RFI is for planning purposes only and does not constitute a formal request for proposal or a commitment by the government to award a contract. All costs associated with responding to this inquiry are the responsibility of the interested party.

POSTED

DEADLINE

Advanced Coatings and Surface EngineeringThe Advanced Coatings and Surface Engineering subcontract, managed by the Department of Defense under the Army Contracting Command Redstone Arsenal, focuses on the development and application of innovative coatings and surface modifications. These services are designed to support prime contractors by enhancing the durability, corrosion resistance, thermal management, and signature management capabilities of components, including stealth and camouflage applications. To achieve these results, the project utilizes advanced technical processes such as chemical vapor deposition, plasma spraying, and specialized coating booths. The primary objective is to deliver high-performance coated components with verified characteristics, operating under NAICS code 332812.

POSTED

DEADLINE

Coating Process Development for Sorbent AdhesionThe NASA SBIR/STTR Program is seeking a subcontractor for the Coating Process Development for Sorbent Adhesion project. The primary objective of this effort is to develop and implement robust coating methods for depositing nanomaterial sorbents onto structured substrates. The resulting coatings must demonstrate high levels of adhesion and uniformity while remaining durable enough to survive rigorous vibration and thermal cycling. This opportunity is designated as a Total Small Business Set-Aside under the SBIR/STTR mandate, specifically for firms with fewer than 500 employees. The work is categorized under NAICS code 332812 and is slated for performance in Houston, Texas.

NASA SBIR/STTR Program

POSTED

DEADLINE

Thermal Management and Passive Cooling SolutionThis subcontract through the NASA SBIR/STTR Program focuses on the design and integration of passive thermal solutions to ensure efficient heat dissipation within aerospace power systems. The primary technical objective involves the development of anodized aluminum heat sinks tailored for high-performance thermal management. The opportunity is designated as a Total Small Business Set-Aside, specifically targeting firms with fewer than 500 employees under the SBIR/STTR mandate. Performance for this contract is based in Cleveland, Ohio, under NAICS code 332812.

NASA SBIR/STTR Program

POSTED

3 months ago

DEADLINE

N/A

AI Contract Overview

The subcontractor is engaged to perform precision CNC machining of aluminum or composite components specifically for aircraft fairings, with strict adherence to AS9100 quality management standards and mandatory first-article inspection protocols to ensure dimensional accuracy and regulatory compliance. All work must meet the exacting technical and procedural requirements of the aerospace defense sector, including material traceability, process controls, and documentation integrity. This contract is issued under the Defense Logistics Agency, part of the Department of Defense, and falls under the NAICS code 332812 for precision machining services. The performance location is unspecified, but the work is critical to military aircraft assembly and must be completed in alignment with defense supply chain protocols. The solicitation was posted on July 14, 2026, and the contract reference number is SPE4A726D0390, indicating a formal procurement through DLA’s defense logistics infrastructure.

General Info

CNC machining of aerospace components under AS9100 for DLA, with first-article inspection and defense supply chain compliance.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

332812 - Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-26-G-0298.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FAIRING, AIRCRAFT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJul 14

subcontract

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Subcontractor to perform precision CNC machining of aluminum or composite components for aircraft fairings, adhering to AS9100 standards and first-article inspection requirements.