Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Machining of Nuts and Assembled Washers

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the precision machining and production of 1,388 units of NUT, PLAIN, ASSEMBLED WASHER, identified by NSN 5310011838655, to be manufactured in strict compliance with approved engineering drawings and applicable military standards. The work is classified as a subcontract under the NAICS code 332722, indicating fabrication of machine shop products, and is being executed for the Defense Logistics Agency, a component of the Department of Defense, ensuring alignment with federal supply and quality requirements. All units must meet exacting technical specifications to support military inventory and operational readiness. The contract was posted on July 27, 2026, and performance is expected to occur without specified geographic constraints, with full accountability for adherence to defense procurement protocols.

General Info

1,388 precision-machined nuts produced per military specs for Defense Logistics Agency under NAICS 332722.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-95N2.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NUT, PLAIN, ASSEMBLED

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Production of 1,388 units of 'NUT, PLAIN, ASSEMBLED WASHER' (NSN: 5310011838655) per engineering drawings and military standards.

Similar Contracts

Same NAICS industry code

Supply of Hexagon Nuts (NSN 5310-01-652-3825)

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

Critical Application Machine Screw Supply

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

Supply of Plain Hexagon Nuts (NSN 5310-00-282-5658)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

Supply of Hexagon Head Cap Screws (NSN 5305-00-914-6130)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

Supply of Critical Safety Machine Bolts

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

Supply of Grooved Headless Pins (NSN 5315014178548)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

Socket Head Cap Screw Manufacturer/Supplier

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

NUT, PLAIN, HEXAGON

Solicitation # SPEA46-26-T-25NF

Solicitation SPEA46-26-T-25NF is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of one plain hexagon nut, identified by NSN 5310-01-630-8285 and technical specification SAE International Q583 P/N J2295J995C2R08-XG5. The requirement is categorized under NAICS code 332722. Delivery is required within 10 days of order, with an original required delivery date of July 22, 2026. The shipment is designated as FOB Origin and is to be delivered to the US Army SSA W58MKR in Zaczernie, Poland. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Inspection and acceptance will occur at the destination per FAR 52.246-2, utilizing sampling methods based on MIL-STD-1916 or ASQ H1331. The procurement incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity requirements. Payment processing must be handled electronically through the Wide Area Workflow system.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-05Q3

This solicitation from the Department of Defense Land Supply Chain is for the procurement of two access covers, identified by NSN 5340-01-461-0652. The contract requires delivery within 20 days after the order is placed and is subject to full and open competition. It incorporates specific technical and quality requirements from the DLA Master List, including strict packaging standards and the prohibition of Class I ozone depleting chemicals. The agreement includes rigorous security and compliance mandates, specifically requiring adherence to Covered Defense Information and CMMC Level 2 certification. Because the item contains technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete mandatory training and questionnaires to access the data. All responses must be submitted by September 11, 2026.

LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

SCREW, CAP, HEXAGON HEAD

Solicitation # SPE4A0-26-T-4689

Solicitation SPE4A0-26-T-4689, issued by DLA Aviation, is a request for quotations for 12 units of hexagon head cap screws under NSN 5305017146483. The procurement is categorized under NAICS 332722 and requires delivery to the Pearl Harbor Naval Shipyard in Hawaii within five days after order. The items must comply with basic specification MIL-DTL-1222J and follow specific packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, with palletization adhering to DLA requirement RP001. The contract specifies destination inspection and acceptance, utilizing sampling methods from MIL-STD-1916 or ASQ H1331. Key regulatory requirements include the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Payment and invoicing must be processed through the Wide Area WorkFlow system. Evaluation preferences are available for certified HUBZone small businesses, and the government will not consider offers utilizing additive manufacturing.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE7M0-27-Q-0016

Solicitation SPE7M0-27-Q-0016 is an urgent and compelling emergency requirement issued by DLA Land and Maritime for the procurement of four machine bolts, identified by NSN 5306-01-286-0864. This firm fixed price acquisition requires the hardware to be manufactured according to the current revision of the applicable part standard, specifically ASME B18.2.1 Revision D. Due to the emergency nature of the buy, the government will evaluate quotes based on both price and the fastest possible delivery, reserving the right to award the contract prior to the closing date of September 18, 2026. The contract specifies that inspection and acceptance will occur at the destination, with delivery to the Pearl Harbor Naval Shipyard in Hawaii. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must adhere to MIL-STD-129 and MIL-STD-130N. Quality assurance is governed by the DLA Master List of Technical and Quality Requirements, with sampling conducted per MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 21 hours ago

DEADLINE

NUT, SELF-LOCKING, HEXAGON

Solicitation # SPE4A6-26-R-XD63

Solicitation SPE4A6-26-R-XD63 is a request for quotation issued by DLA Aviation for the procurement of 9,000 self-locking hexagon nuts (NSN 5310-99-702-3861). The item is designated as a Commercial Off-the-Shelf product and an Air Force Critical Safety Item, requiring strict adherence to quality and traceability standards. All requests for waivers or deviations must be approved by the DSC contracting officer. The award will be based on a best-value determination, weighing price and past performance, with a heavy emphasis on SPRS assessments and historical quality and delivery compliance. Delivery is required within 560 days after receipt of the order, with inspection and acceptance occurring at the origin. The supplies are to be delivered to DLA Distribution Warner Robins in Georgia. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization must follow RP001 requirements. The contract incorporates several critical regulatory standards, including SAE AS9100 for quality, DFARS 252.204-7012 for safeguarding covered defense information, and the Buy American Balance of Payments Program. Invoicing and payment processing are to be managed through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Storage Battery Supplier (NSN 6140-01-624-9682)

Battery Manufacturing

POSTED

about 21 hours ago

DEADLINE

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

Supply of Uninterruptible Power Supplies (UPS)

Motor and Generator Manufacturing

POSTED

about 21 hours ago

DEADLINE

MIL-SPEC Packaging and Hazardous Material Shipping

Freight Transportation Arrangement

POSTED

about 21 hours ago

DEADLINE

Supply of Battery Assembly (6140-01-664-6369)

Storage Battery Manufacturing

POSTED

about 21 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

Solicitation SPE7L7-26-Q-2418 is a firm-fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of sealed lead acid storage batteries, identified by NSN 6140-01-624-9682. The requirement consists of two line items totaling eight units, with two units for item 0001 and six units for item 0002. Approved sources include EnerSys Delaware Inc. (part numbers ODS-AGM6M or PC2250) and Stored Energy Products, Inc. (part number PC2250). These items are designated as critical application items and are restricted source items requiring engineering source approval by the government design control activity. The batteries are classified as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with shipping terms set as FOB Destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001, while hazardous materials must be handled according to IP025 and FAR 52.223-3. Quality assurance will be managed through destination inspection and acceptance using sampling methods such as MIL-STD-1916 or ASQ H1331. Award will be based on cost alone for quotes that conform to the solicitation requirements. Quotations must be submitted by September 21, 2026, and payment will be processed electronically via the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

about 21 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2422

This contract is a firm fixed price solicitation from the Defense Logistics Agency for one maintenance-free sealed lead-acid type I storage battery, part number APCRBC133 by Schneider Electric IT Corporation. The item has a non-extendable shelf life of 12 months and must be delivered within 60 days after order. Inspection and acceptance will occur at the origin, with shipping destined for the USS Harvey C Barnum Jr. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contract includes hazardous material communications regarding mercury restrictions and specifies that the battery must meet nonspillable criteria under 49 CFR 173.159 to qualify for specific transportation exceptions across land, sea, and air.

Battery Manufacturing

POSTED

about 21 hours ago

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7L7-26-Q-2420

POSTED

about 21 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE8E6-26-T-4407

Solicitation SPE8E6-26-T-4407 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of four decals, identified by NSN 7690012629486 and Boeing part number BACM9L10AVM. This acquisition is an FMS requirement for Greece, with a rapid delivery schedule of five days after receipt of order. The items are designated as Type I (Code M) with a non-extendable shelf life of 24 months. Delivery, inspection, and acceptance are all set as FOB Origin, with the final destination located in Mechanicsburg, Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and shelf-life labeling. Palletization must comply with DLA packaging requirements (RP001), and the use of plastics for wrapping or cushioning should be avoided where possible. Administrative requirements include electronic invoicing and receiving reports via the Wide Area WorkFlow system. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions under the Buy American Act, and the prohibition of covered defense telecommunications equipment.

Commercial Printing (except Screen and Books)

POSTED

about 21 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

The Defense Logistics Agency (DLA) Land and Maritime has issued solicitation SPE7L7-26-Q-2417 for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369. The requirement specifies a delivery timeline of 60 days after receipt of order, with the place of performance located at FPO 09592. Award will be based on the best value to the government, evaluating technical acceptability, price, and past performance regarding offered delivery. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. This contract carries stringent security and regulatory requirements. It requires CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to export control under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed DLA export-control training. Additionally, the vendor must adhere to MIL-STD-2073-1E Level B for packaging and MIL-STD-129 for marking. Because the items are hazardous materials, the contractor must provide a HAZDEC form and Material Safety Data Sheets in accordance with FED STD 313D and DFARS 252.223-7001.

Battery Manufacturing

POSTED

about 21 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS