Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Machining of Protective Dust Caps

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the precision machining of 50 protective dust caps conforming to military specifications, identified by NSN 5340-00-930-0839, with a CARC finish applied according to DCSC Drawing 16236 CS-2300-0001. The work is to be performed in Houston, Texas, with the delivery and compliance requirements aligned with Department of Defense standards for performance and finish. The solicitation is under the NAICS code 332710, indicating it pertains to forging and stamping operations, and is categorized as a subcontract opportunity issued by the Land Supply Chain under the Department of Defense. The response deadline is set for August 14, 2026, with the solicitation posted on July 30, 2026, allowing potential vendors a roughly two-week window to submit proposals. The contract does not specify a set-aside type, meaning it is open to all eligible contractors without targeted preferences. All manufacturing must meet exacting military tolerances and finish specifications to ensure compatibility and durability in operational environments. The place of performance is designated as Houston, with no additional office address details provided, and interested parties can access further information through the provided DIBBS portal link.

General Info

Precision machine 50 military-spec dust caps with CARC finish in Houston, due August 14, 2026.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332710 - Machine ShopsView NAICS

Place of Performance

HOUSTON, TX, 77034-5592, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of 50 protective dust caps (NSN 5340-00-930-0839) to military specs, including CARC finish per DCSC Drawing 16236 CS-2300-0001.

Similar Contracts

Same NAICS industry code

Adjustable Clevis Manufacturing & SupplyThe contract calls for the manufacture and supply of adjustable clevises identified by NSN 5342-01-166-0578, to be produced in strict compliance with military specifications. This includes precision machining to exact dimensional and performance standards, along with proper packaging and marking requirements to ensure traceability and readiness for military use. The work must be performed by a small business as this is a Total Small Business Set-Aside under FAR 19.5, meaning only eligible small businesses may submit bids. The NAICS code 332710 applies, categorizing the work under Other Metal Forge and Stamp. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, giving interested parties approximately three weeks to prepare and submit proposals. The contracting activity is the ASC Commodities Division under the Department of Defense, and the place of performance and point of contact details are not specified in the provided data. Bidders must ensure complete adherence to military standards, packaging protocols, and marking regulations, and submissions must be made through the official DIBBS portal accessible via the provided link.

ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

CLEVIS, ADJUSTABLE

Solicitation # SPE4A6-26-R-XC15

This contract, issued under solicitation SPE4A6-26-R-XC15 by the ASC Commodities Division of the Department of Defense, is a Total Small Business Set-Aside for the procurement of adjustable clevises with NSN 5342-01-166-0578, classified under NAICS code 332710. The contract operates as an indefinite-delivery, indefinite-quantity (IDIQ) mechanism with a five-year performance period and a total ceiling value of $350,000, requiring delivery within 80 days of order receipt. Performance is to be conducted at various CONUS stock locations under FOB Origin terms, with all items subject to strict compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling, barcoding, and marking, including special notations for product verification test samples. The contract mandates use of Wide Area WorkFlow (WAWF) for all invoicing and receiving reports and includes detailed requirements for supply chain traceability, material buffer availability, and Vendor Shipment Module submissions. The contract incorporates a comprehensive set of FAR and DFARS clauses governing quality assurance, inspections, subcontracting, and compliance, with inspections occurring at both origin and destination under MIL-STD-1916, ASQ H1331, and MIL-STD-105 standards, demanding zero non-conformances unless otherwise specified. Subcontracting obligations require flowdown of key clauses, including those addressing commercial product sourcing and counterfeit electronic part avoidance, with specific requirements for subcontracts exceeding the simplified acquisition threshold. The contractor must comply with cybersecurity mandates such as NIST SP 800-171 under 252.204-7012, prohibited use of covered defense telecommunications equipment and foreign satellite services, and hazard communication labeling under OSHA guidelines. The contract prohibits unauthorized use of foreign-flag vessels and requires immediate notification if sea transportation is unexpectedly needed. Representations concerning small business status, labor practices, veteran and disability inclusion, trafficking in persons, and foreign sourcing (including Xinjiang and Russian-linked entities) are required and subject to SAM verification, with affirmative responses triggering additional reporting obligations. The award will be made through a best-value trade-off analysis heavily weighted toward past performance, particularly SPRS assessments, with cost considered as neither the sole nor primary factor. All submissions must be made electronically via DIBBS or email to

ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Clutch, Cam Component SupplyThe contract requires the supply of a precision clutch cam component designed for integration into turbine or fluid handling systems, with performance expected at Tracy, California, 95304-5000. It is classified as a subcontract under NAICS code 332710, indicating manufacturing of bearing and gear cutters, and is issued by the Fluid Handling Division of the Department of Defense. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026. No set-aside designation has been specified, and the contract is open to all qualified vendors capable of meeting the technical and delivery requirements for this high-precision mechanical part. All submissions must align with the detailed specifications for performance, tolerances, and material integrity required for operation within demanding fluid handling or turbine environments.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Precision Machining of Shims (NSN 5365015776387)The contract requires the manufacture of precision metal shims in accordance with military specifications and the National Stock Number 5365015776387, encompassing full lifecycle production from material sourcing to final quality inspection. All components must meet strict dimensional tolerances and compliance standards dictated by defense procurement requirements, ensuring functionality and reliability in military applications. The work includes machining operations, process controls, and certification of conformance to ensure each shim meets exacting performance benchmarks. This is a total small business set-aside under the Small Business Administration, classified under NAICS code 332710 for forging and stamping, and is issued as a subcontract by the Department of Defense through the Land Supply Chain organization. The solicitation was posted on July 30, 2026, with responses due by August 14, 2026, and is accessible via the DIBBS platform. Only small businesses eligible under FAR 19.5 may submit proposals, and all production must be performed in compliance with federal acquisition regulations and defense quality assurance protocols.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Machined Shaft Manufacturing (NSN 3040001180847)The contract calls for the manufacture and delivery of 57 precision-machined straight shafts with National Stock Number 3040001180847, ensuring full compliance with applicable military specifications, packaging, labeling, and regulatory requirements. The items must be delivered FOB origin to Tinker Air Force Base in Oklahoma, with the vendor responsible for meeting all quality, documentation, and logistical standards associated with defense procurement. This subcontract is designated as a Total Small Business Set-Aside under SBA guidelines, specifically reserved for small businesses as defined under NAICS code 332710, which covers forging and stamping operations. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, and is managed by the ASC Supplier Oper OEM Division within the Department of Defense, reflecting a targeted acquisition strategy focused on supporting small business participation in defense manufacturing.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Precision Assembly and Calibration of Caliper Parts KitThe contract requires the assembly, calibration, and quality verification of a precision caliper parts kit identified by NSN 2530016668880, ensuring full compliance with military specifications. This includes rigorous tolerance verification, functional testing under defined conditions, and preparation of the completed kit for immediate packaging and deployment, with each step strictly aligned to defense standards. The work must be executed with high accuracy to guarantee operational readiness and reliability in field applications. The solicitation, classified as a subcontract under NAICS code 332710, was posted on July 30, 2026, with a response deadline of August 10, 2026. Performance is to occur at a designated location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, and the contracting activity falls under the Department of Defense, specifically the LSO Combat Vehicles and Armament office. Participation is limited to qualified subcontractors capable of meeting stringent military quality and inspection protocols, with no set-aside provisions specified.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Precision Machined Rotor Component SupplyThe contract is for the supply of 1,752 precision-machined rotor components designated as P/N 6263794 and NSN 2805001557263, intended for use in turbine engine systems and required to meet rigorous military technical and quality standards. These components are critical to operational performance and must be manufactured to exacting specifications to ensure reliability and durability under demanding conditions. The work is to be performed at a facility located in Tracy, California, with the zip code 95304-5000 serving as the official place of performance. This is a subcontract opportunity under the NAICS code 332710, which classifies the industry as Metal Foundries, and is issued by the Department of Defense through LSO Combat Vehicles and Armament. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, leaving a narrow window for qualified suppliers to submit proposals. The contract is not subject to any specific set-aside provisions, meaning it is open to all eligible contractors regardless of size or status. All interested parties must comply with the military-grade requirements and deliver fully certified components to meet the needs of defense systems.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Precision Machined Adapter Supply (CRES Material)The contract calls for the manufacture and supply of straight tube-to-hose adapters fabricated from Corrosion-Resistant Steel (CRES), adhering strictly to military specifications. The items must be precision machined to ensure compatibility, durability, and performance under demanding operational conditions, with all production and quality control processes aligned to defense-grade standards. The place of performance is designated as New Cumberland, Pennsylvania, with the final products destined for use within Department of Defense systems under the Maritime Supply Chain. This is a subcontract opportunity, solicited under NAICS code 332710 for forging and stamping, with responses due by August 10, 2026. The posting date is July 30, 2026, indicating a standard ten-day window for interested parties to submit proposals. The contract is managed by the Department of Defense through its Maritime Supply Chain division, and all technical and delivery requirements will be evaluated against established military performance benchmarks. Interested suppliers must ensure full compliance with CRES material standards and precision machining tolerances to be considered for award.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Precision Machined Shaft ManufacturingThe contract calls for the manufacture of four precision shoulderered shafts to meet strict technical specifications, with full compliance to federal standards for packaging, marking, and quality assurance. The work is classified under NAICS code 332710, indicating it falls within the machining and finishing of metal products, and is structured as a subcontract under the Department of Defense’s Land Supplier Opns Wheeled Vehicles organization. Performance is required at a designated location in Tracy, California, with a zip code of 95304-5000, and bids must be submitted by the deadline of August 10, 2026. The opportunity was posted on July 30, 2026, and all parties must adhere to established government protocols for deliverables and documentation. Full technical and compliance requirements are accessible through the provided DIBBS portal link.

LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

DEADLINE

Precision Machining of Mounting Bracket (NSN 5340-01-614-6185)The contract requires the manufacture of four precision mounting brackets to meet military NSN 5340-01-614-6185 specifications, encompassing full-cycle production including CNC machining, careful material selection, surface finishing, and rigorous inspection processes to ensure dimensional accuracy and functional integrity. All work must comply with federal packaging and marking standards to guarantee proper handling, identification, and traceability throughout military logistics channels. The opportunity is structured as a subcontract under NAICS code 332710 and is being managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. The place of performance is designated as New Cumberland, Pennsylvania, with a response deadline of August 7, 2026, and the solicitation was posted on July 30, 2026. Proposals must align precisely with the military specification and demonstrate capability in meeting stringent defense quality and compliance requirements.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

PROPS PROTABLE PIER

Solicitation # SPE4A5-26-T-314A

The contract pertains to the procurement of two Props Protable Pier units, identified by NSN 4920-01-473-9475 and part number 207-300-3, under solicitation SPE4A5-26-T-314A, classified as a Total Small Business Set-Aside. Delivery is required FOB origin within 147 days of contract award, with no quantity variance permitted, and inspection and acceptance occur at the manufacturer’s location. The item must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking needed, and palletization must adhere to DLA packaging guidelines. Technical and quality obligations are governed by referenced requirements from the DLA Master List, including cybersecurity at CMMC Level 2, inspection protocols based on MIL-STD-1916 or comparable zero-based sampling plans, and specific verification levels for critical, major, and minor attributes. Unit of issue is each, and the item is not subject to Item Unique Identification per customer request. Technical data for competitive bidding is currently unavailable, deemed proprietary or insufficient. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with freight and parcel post addresses matching this location. The contract mandates adherence to DLA transportation procedures C19 and C20 for in-transit and first destination logistics. The contracting officer is Hien-Van Trinh of the Department of Defense’s ASC Supplier Operations OEM Division, reachable via provided contact information. The solicitation was issued on July 30, 2026, with responses due by August 7, 2026, and procurement is restricted to small businesses under NAICS code 332710. The original required delivery date is April 19, 2027, and all compliance elements, including quality assurance, cybersecurity self-assessment, and marking, are non-negotiable conditions of award.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Custom Turbomachinery Housing Machining

Solicitation # 80NSSC26940306Q

NASA/NSSC is soliciting capabilities from interested parties for a sole source procurement of Custom Turbomachinery Housing Machining under FAR 12.102(a), as Intelligent Tool Corp has been identified as the sole provider of this specialized service. The contract will be managed by NASA’s Shared Services Center with performance occurring at NASA’s Marshall Space Flight Center, and it will follow commercial item acquisition procedures outlined in FAR Part 12. The North American Industry Classification System code for this effort is 332710. Interested organizations must submit written capabilities and qualifications by 5:00 p.m. Eastern Time on August 4, 2026, to support the government’s determination on whether to proceed without competition; oral communications are not permitted. The NASA FAR Supplement Clause 1852.215-84 on the Ombudsman applies, and information regarding the Center Ombudsman can be accessed via the provided online listing. The primary point of contact for the procurement is Sara Jusino-Terry, with Bobbie Young serving as secondary contact.

NASA Shared Services Center

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

Small Business Subcontracting Plan ImplementationThe contract requires support to the prime contractor in fulfilling small business utilization objectives under the Federal Acquisition Regulation provisions FAR 52.219-9 and FAR 52.219-16, which mandate the development and execution of a small business subcontracting plan. This includes performing outreach to small businesses, identifying and securing qualified subcontractors, and ensuring compliance with reporting requirements to demonstrate progress toward established goals. The effort is centered on facilitating meaningful participation of small businesses in the performance of work under the prime contract, with a focus on active engagement and transparent documentation throughout the contract lifecycle. The solicitation is associated with NAICS code 541611, which pertains to management consulting services, and is managed by the Department of Defense through the Land Supply Chain office. The response deadline is August 31, 2026, with the opportunity posted on July 31, 2026. Performance location and point of contact details are not specified, but the work is intended to support defense-related procurement activities. The type of set aside is not indicated, and the contract is structured as a subcontracting support engagement rather than a direct award. All activities must align with federal small business contracting policy and timelines to ensure compliance and accountability.

Administrative Management and General Management Consulting Services

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Cybersecurity Compliance and Incident Response SupportThe contract provides ongoing support for maintaining compliance with NIST SP 800-171 requirements, managing cyber incident reporting procedures, ensuring proper preservation of controlled unclassified information on media, and overseeing subcontractors to ensure adherence to DFARS 252.204-7012. This support is essential for safeguarding sensitive defense information throughout the supply chain and must be delivered in alignment with all applicable federal cybersecurity standards. The work involves continuous monitoring, documentation, and response capabilities to address potential threats and ensure regulatory compliance across all layers of the contract structure. This is a subcontract under the Department of Defense, classified under NAICS code 541512 for computer systems design services, with a submission deadline of August 31, 2026. Performance location and specific agency office details are not specified, but the scope centers on safeguarding controlled unclassified information in alignment with federal mandates. The requirement applies to any subcontractor handling or processing covered defense information, and the contractor must demonstrate established processes for incident detection, reporting, media handling, and vendor compliance enforcement. All activities must be conducted with strict attention to accountability, traceability, and timely response to cybersecurity events as defined by DoD regulations.

Computer Systems Design Services

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Product Verification Testing (PVT) SupportThe contract supports government-conducted Product Verification Testing by providing comprehensive assistance in sample preparation, documentation, and coordination with Defense Logistics Agency testing laboratories, as specified in Section E05. This subcontract is focused on ensuring that all testing procedures align with federal standards and that logistical and administrative tasks are executed accurately to facilitate timely and reliable verification outcomes. The work involves close collaboration with DLA labs to meet technical requirements and maintain traceability throughout the testing lifecycle. The solicitation is posted under NAICS code 541380 and is managed by the Land Supply Chain within the Department of Defense. The opportunity is open for responses until August 31, 2026, with no specific set-aside categories or organization type restrictions indicated. Performance locations are not explicitly defined, but the work centers around DLA testing facilities and requires active coordination with government personnel. Interested parties can access further details through the official DIBBS portal linked in the contract data.

Testing Laboratories and Services

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Packaging, Preservation, and Marking ServicesThe contract requires the provision of military-compliant packaging, preservation, and labeling services for chain assemblies in strict accordance with Defense Logistics Agency standards. This includes the application of accurate barcoding for inventory tracking and full compliance with hazardous communication regulations to ensure safe handling and transport. All work must meet the stringent requirements for military-grade documentation, material protection, and labeling procedures to support logistics and operational readiness. The scope encompasses the full lifecycle preparation of chain assemblies from packaging through final marking, ensuring they are ready for deployment under Department of Defense protocols. This is a subcontract under the NAICS code 493190, issued by the Land Supply Chain division of the Department of Defense, with a response deadline of August 31, 2026. The performance location is not specified, but adherence to federal military logistics standards is mandatory. The solicitation is accessible via the DIBBS platform, and all submissions must comply with the detailed technical and regulatory expectations outlined by DLA without deviation. No set-aside provisions are indicated, meaning the opportunity is open to all qualified subcontractors capable of meeting the military compliance requirements.

Other Warehousing and Storage

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Manufacturing of Chain Assembly, Tire (NSN 2540-12-417-2097)The contract entails the full-scale production of 541 or more units of a specialized chain assembly designed for tire applications, with the National Stock Number 2540-12-417-2097. All phases of manufacturing including material sourcing, fabrication, assembly, inspection, and packaging must adhere strictly to Defense Logistics Agency standards to ensure quality, consistency, and compliance with military specifications. The work is classified as a subcontract under NAICS code 332439, indicating it falls under Other Fabricated Metal Product Manufacturing, and is managed by the Land Supply Chain under the Department of Defense. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026, and performance is expected to be carried out in accordance with DLA requirements, though the specific location of performance is not detailed. The contract does not specify a set-aside type or designated small business preferences, and no point of contact information is provided in the public details.

Other Metal Container Manufacturing

POSTED

about 12 hours ago

DEADLINE

in about 1 month

CHAIN ASSEMBLY, TIRE

Solicitation # SPE7L1-26-R-0099

The contract is for the procurement of 541 units of CHAIN ASSEMBLY, TIRE with NSN 2540-12-417-2097, requiring delivery within 120 days after delivery order issuance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. Packaging must comply with DLA packaging standards, and government identification must be removed from all non-accepted supplies. The use of Class I ozone-depleting chemicals is strictly prohibited in any component or process, overriding any conflicting specification but without waiving product performance requirements; any substitute chemicals require prior approval unless explicitly authorized by the specification. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are deemed major. MIL-STD-105/ASQ Z1.4 may be used to determine sample size, but acceptance requires zero non-conformances unless otherwise stated. The solicitation was issued on July 31, 2026, with responses due by August 31, 2026, under solicitation number SPE7L1-26-R-0099, managed by the Department of Defense’s Land Supply Chain through point of contact Sarah Harmon.

Rubber Product Manufacturing for Mechanical Use

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Supply of Carrier Bolt (NSN: 1005016894064)The contract requires the supply and delivery of 29 units of Carrier Bolt identified by NSN 1005016894064, with strict adherence to Department of Defense packaging, marking, and military standards. All items must be properly preserved and contained in accordance with prescribed regulatory requirements to ensure integrity during transport and storage, as this is a defense article shipment subject to federal compliance protocols. The work must be performed at the specified place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. This is a total small business set-aside under the SBA program, classified under NAICS code 332994, and is structured as a subcontract within the Land Supply Chain division of the Department of Defense. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, providing potential contractors a 12-day window to submit proposals. The contract opportunity is accessible through the DIBBS platform under solicitation reference SPE7L126T900Z, and all participants must meet the eligibility criteria for small business set-asides while fully complying with Defense Logistics Agency regulations for defense logistics.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Sustainable and Environmentally Compliant Product SourcingThe contract requires the sourcing or substitution of environmentally preferable products in strict compliance with FAR 52.223-23, emphasizing the use of sustainable and energy-efficient components throughout the supply chain. All offerings must meet federal guidelines for environmental responsibility, ensuring that materials and equipment reduce environmental impact while maintaining performance standards. This is a subcontract under NAICS code 423930, tied to the Department of Defense through its LAND SUPPLY CHAIN office, with performance required at the specified location in Albany, Georgia, 31704-1128. The solicitation was posted on July 30, 2026, and responses must be submitted by August 10, 2026, with no set-aside provisions identified. The contract is accessible via the DIBBS platform for potential vendors seeking to participate.

Recyclable Material Merchant Wholesalers

POSTED

DEADLINE

Safety Data Sheet (SDS) and Regulatory Documentation ManagementThe contract requires the preparation, submission, and ongoing maintenance of Safety Data Sheets and hazard data lists for all hazardous materials used or managed under the agreement. The successful bidder must ensure full compliance with Department of Defense disclosure requirements and stay current with all applicable regulatory updates to maintain accurate, legally compliant documentation. This work is critical to safeguarding personnel, supporting environmental protection, and meeting federal standards for hazardous material handling and reporting. The contract is classified as a subcontract under NAICS code 541620, indicating it falls within the scientific and technical consulting services category. It is issued by the Department of Defense through the Land Supply Chain organization, with performance required at a location in Albany, Georgia, with the ZIP code 31704-1128. Interested parties must submit responses by August 10, 2026, after the solicitation was posted on July 30, 2026, with details accessible through the DIBBS platform. Compliance with DoD-specific disclosure rights remains a central obligation throughout the contract duration.

Environmental Consulting Services

POSTED

DEADLINE

Military Packaging and Preservation ServicesThe contract requires the performance of military packaging and preservation services for defense items in strict compliance with MIL-STD-2073-1E standards, encompassing the application of moisture barriers, proper containerization, and adherence to MIL-STD-129 marking requirements to ensure the integrity and traceability of military equipment during storage and transport. All work must be executed to meet the rigorous environmental and logistical specifications mandated by the Department of Defense for the protection of critical defense materiel. This subcontract is posted under NAICS code 312230 and is set for performance at a designated location in Albany, Georgia, with a response deadline of August 10, 2026. The contracting activity falls under the Land Supply Chain organization within the Department of Defense, indicating the need for reliable, qualified partners to support defense logistics operations. Interested parties must submit proposals by the specified deadline to be considered for award, with all work expected to align with federal defense packaging protocols and delivery schedules tied to operational readiness needs.

Tobacco Manufacturing

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ComplianceThe contract requires strict adherence to federal regulations governing the packaging, labeling, and documentation of hazardous materials, specifically enforcing OSHA 29 CFR 1910.1200 for hazard communication, DFARS 252.223-7001 for defense supply chain compliance, and MIL-STD-129 for uniform military labeling standards. All shipments must include properly formatted labels and complete Safety Data Sheets submitted in accordance with these standards to ensure safe handling, transportation, and use by defense and government recipients. Compliance is mandatory for all stages of procurement and delivery under this subcontract. Performance is assigned to Albany, Georgia with a.zip code of 31704-1128, and all deliverables must be finalized by the response deadline of August 10, 2026. The North American Industry Classification System code 541690 indicates this activity falls under other scientific and technical consulting services, suggesting the work involves specialized expertise in regulatory compliance and hazardous material logistics. The contract is issued under the Department of Defense’s Land Supply Chain organization, underscoring its critical role in supporting military operations through secure, compliant material handling practices.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Supply of Oil Filter Adapters (NSN 2940011578873)The contract entails the procurement of 16 oil filter adapters with National Stock Number 2940011578873 under two firm fixed-price contract line items, CLIN 0001 and CLIN 0002. The items must be sourced or manufactured in compliance with military specifications, ensuring they meet the required performance, quality, and durability standards for defense applications. The work is to be performed at a place of performance in Albany, Georgia, with the delivery and fulfillment obligations tied to the specified location. The solicitation was posted on July 30, 2026, with a response deadline of August 10, 2026, indicating a limited window for potential suppliers to submit their proposals. Classified as a subcontract under the NAICS code 332996, which pertains to other fabricated metal product manufacturing, this procurement is managed by the Department of Defense through its Land Supply Chain organization. The contract structure suggests a focused effort to acquire critical components under a fixed-price arrangement, minimizing cost variability and emphasizing accountability from the supplier to deliver fully compliant parts within the given timeframe.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE