Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Machining of Shouldered Shafts

Active

Federal

Response Deadline10/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the precision fabrication of four shouldered shafts for the DLA Weapons Support Land Supply Chain. The selected contractor will be responsible for CNC turning and milling raw stock to strictly adhere to Basic Drawing NR 53711 8197431 Revision B and TDP Rev A Gen 2 specifications, utilizing CNC lathes, mills, and CMM equipment to ensure precision tolerances. The project requires strict adherence to regulatory standards, including ITAR/EAR compliance and a CMMC Level 2 self-assessment. Performance will take place in Dublin, California, under NAICS code 332710, with a response deadline set for October 19, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

332710 - Machine Shops

Place of Performance

DUBLIN, CA, 94568-4328, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-27-T-0489.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SHAFT, SHOULDERED

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 7

subcontract

Response DeadlineOct 19

Submission deadline

Response Deadline

10/19/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs primary fabrication of shoulder shafts for prime contractors on DLA Weapons Support Land Supply Chain projects. CNC turns and mills raw stock to meet Basic Drawing NR 53711 8197431 Revision B and TDP Rev A Gen 2 specifications. Utilizes CNC lathes, mills, and CMM for precision tolerances. Requires CMMC Level 2 self-assessment and ITAR/EAR compliance. Delivers four completed machined shafts.

Similar Contracts

Same NAICS industry code

Precision Machining and Finishing for Hinge LeavesThis subcontract involves providing secondary machining and finishing services for the DLA Weapons Support Land Supply Chain. The scope of work focuses on the precision drilling, milling, and surface treatment of cast metal butt hinge leaves using CNC equipment to ensure they are ready for final packaging. Performance of these services will take place in New Cumberland. Due to the nature of the project, the contractor must hold CMMC Level 2 certification and possess the necessary authorization to handle ITAR and EAR export-controlled data. Interested parties must respond by October 19, 2026, regarding this requirement categorized under NAICS code 332710.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Precision Machining of Aircraft Cargo Rail AssembliesThis subcontract involves the precision machining, milling, and turning of five aircraft cargo rail assemblies for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The contractor must fabricate all components according to TDP DTID 07P5G1504 Rev C, with a strict prohibition on the use of additive manufacturing. Performance of the work will take place in Tracy, California. To be eligible, the provider must maintain SAE AS9003 or ISO 9001 quality systems and demonstrate CMMC Level 2 compliance. The project falls under NAICS code 332710, with a response deadline set for October 15, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Precision Steel Tube Tee Fabrication (NSN 4730010543882)This subcontract involves the precision fabrication of 16 steel tube tee units for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division for F-16 aircraft. The project requires the manufacture of 1/4 inch O.D. steel tubing featuring 7/16-20 UNJF-3A threads, with strict adherence to NAS1764, NAS1760, SAE AS18280H, and SAE AS33514 standards. The contractor must utilize precision threading equipment and ensure full compliance with the Buy American Act and Berry Amendment sourcing requirements. Performance for this contract is located in New Cumberland, Pennsylvania, under NAICS code 332710.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 11 hours ago

DEADLINE

Precision Pin Fabrication (NSN 5315-01-248-2625)This subcontract involves the manufacture and supply of two specialized precision pins for the DLA Weapons Support ASC Commodities Division under NSN 5315-01-248-2625. The contractor must utilize precision machining to meet exact technical data specifications, as the use of additive manufacturing is strictly prohibited. Performance will take place in New Cumberland, Pennsylvania. To be eligible, the provider must maintain SAE AS9003 or ISO 9001 quality standards and hold certification under the US/Canada Joint Certification Program to ensure full ITAR and EAR compliance. The solicitation was posted on October 7, 2026, with a response deadline of October 15, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Precision Machining and Finishing of Tail Rotor Control AdaptersThis subcontract involves the precision machining and finishing of seven Tail Rotor Control Adapters for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The selected contractor will be responsible for machining cast blanks to final dimensions using CNC milling and turning, executing Production Lot Tests, and ensuring all items are packaged according to MIL-STD-129 and ASTM D3951 standards. Final deliverables include the finished adapters and completed DD Form 1222 documentation. To be eligible, contractors must maintain ITAR or EAR compliance and hold either SAE AS9003 or ISO 9001 certification. The work is categorized under NAICS code 332710 and will be performed in San Diego, California. Interested parties must respond by October 15, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Pitch Link Bearing Cutter ManufacturingThis subcontract involves the manufacture of 10 Pitch Link Bearing Cutters for prime contractors supporting DLA Troop Support Construction and Equipment projects. The tools must be fabricated according to NSN 3455-01-738-5833 and P/N BMK-001. Production is limited to traditional subtractive or formative manufacturing methods, as additive manufacturing is strictly prohibited. The selected provider must hold ISO 9001:2015 certification and ensure full compliance with the Buy American Act and the Berry Amendment. The project is associated with the Department of Defense and the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. Responses are due by October 19, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 11 hours ago

DEADLINE

Precision Machining and Assembly of Fan Frame BushingsThis subcontract involves the precision machining and final assembly of five Fan Frame Bushing Assemblies for the DLA Weapons Support ASC Commodities Division. The contractor is required to manufacture components according to Drawing 9681M48 and Part Number 9681M48P06 utilizing CNC equipment. Performance will take place in San Diego, with a strict requirement for the delivery of Certificates of Quality Compliance for all completed units. To ensure operational standards, the contractor must implement inspection systems adhering to SAE AS9003 or ISO 9001. The project mandates full compliance with DFARS 252.204-7012 and requires that all hardware provided is mercury-free. The solicitation was posted on October 7, 2026, with a response deadline of October 15, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Manufacture and Supply of Guide Rollers (NSN 3950-01-424-6831)This subcontract involves the manufacture and supply of precision guide rollers under NSN 3950-01-424-6831 for prime contractors supporting DLA Troop Support hardware. The scope of work requires the fabrication of five units per technical data package using precision machining, with strict adherence to quality sampling standards per MIL-STD-1916 or ASQ H331 and packaging requirements according to MIL-STD-2073-1E. The project is managed under NAICS code 332710 for the Department of Defense, with performance located in San Diego. Due to the nature of the technical data, contractors must hold US/Canada Joint Certification Program certification to ensure authorized ITAR data access. The final deliverable consists of completed and properly marked hardware.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 11 hours ago

DEADLINE

Manufacturing of Housing Adapters (NSN 3040150349898)This subcontract involves the manufacture of housing adapters for the DLA Weapons Support Land Supply Chain, specifically fabricating components according to the technical data package for NSN 3040150349898 and Iveco Defence Vehicles part 5802958862. The project requires the delivery of four completed adapters, which must be packaged in accordance with MIL-STD-2073-1E and produced at a facility in New Cumberland. The contractor must strictly adhere to RA001 quality requirements and ensure all material sourcing complies with the Buy American Act and the Berry Amendment. Additionally, the provider is required to maintain NIST SP 800-171 compliance for cybersecurity. This opportunity falls under NAICS code 332710 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Bronze Pipe Flange FabricationThis subcontract involves the precision machining and fabrication of 55 bronze pipe flanges for the DLA Weapons Support Fluid Handling Division. The work requires the use of CNC lathes and mills to produce parts with a 1.5 inch ID and 1.900 inch OD, featuring 150 PSI rated bolt holes. All fabrication must strictly adhere to Technical Data Package Rev A Gen 1 and Basic Drawing NR 16236 CS4730-0108. The project is governed by NAICS code 332710 and mandates full compliance with the Buy American Act and the Berry Amendment. Performance will take place in San Diego, California. Interested parties must respond by October 19, 2026, to fulfill the requirements for these Department of Defense components.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 11 hours ago

DEADLINE

PEEK Nanopositioner Toolbox and Vacuum AccessoriesThis subcontract involves the manufacture and supply of specialized PEEK nanopositioner toolboxes and vacuum accessories for prime contractors working on Department of Energy projects at Argonne National Laboratory. The scope of work focuses on the production of Model 1008438 toolboxes, which include ANB200 accessories and adapter plates designed for 200 and 300 series nanopositioners. To ensure compatibility with extreme environments, the hardware must utilize titanium screws and low-outgassing materials rated for both cryogenic and vacuum conditions. The project is categorized under NAICS code 332710 and will be performed in Lemont, Illinois. The procurement process is managed through an Argonne National Laboratory DOE contractor, with a response deadline set for October 12, 2026.

Argonne National Labor - DOE Contractor

POSTED

about 16 hours ago

DEADLINE

Isokinetic Sampling Probe and Accessory SupplierThis subcontract through the NASA Shared Services Center involves the supply of high-grade stainless steel sampling equipment for prime contractors working on NASA Marshall Space Flight Center projects. The scope of work requires the delivery of three isokinetic sampling probes with 0.1 CFM barbed fittings and three corresponding non-vented caps. All provided hardware must be manufactured from Series 316L Stainless Steel, and the supplier is required to provide formal material certification to verify these specifications. The procurement falls under NAICS code 332710 and is managed by the National Aeronautics And Space Administration.

NASA Shared Services Center

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

Metal Casting and Tooling for Butt Hinge LeavesThis subcontract involves providing metal casting and tooling services for the DLA Weapons Support Land Supply Chain. The selected contractor will be responsible for fabricating casting tooling and molds to produce 17 finished metal cast butt hinge leaves, identified by NSN 5340-01-333-6628, in strict accordance with government technical data. Performance of this contract will take place in New Cumberland. To be eligible, contractors must possess specialized foundry equipment and maintain ISO 9001:2015, CMMC Level 2, and US/Canada Joint Certification Program certifications. Additionally, the provider must be authorized to handle ITAR and EAR regulated data. Responses to this opportunity are due by October 19, 2026.

POSTED

about 11 hours ago

DEADLINE

Supply of MIL-SPEC UV-Protective PackagingThis subcontract involves the supply of specialized UV-protective packaging materials for prime contractors supporting the DLA Weapons Support Land Supply Chain under the Department of Defense. The scope of work requires the delivery of medium duty, waterproof, greaseproof, and opaque bags specifically designed to prevent the UV deterioration of gaskets. All materials must strictly adhere to MIL-DTL-117, Type II, Class C, Style 1 and MIL-STD-2073-1E standards to ensure full compliance with military specifications. The project is categorized under NAICS code 424990, with the place of performance located in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on October 7, 2026, with a response deadline set for October 19, 2026.

Other Miscellaneous Nondurable Goods Merchant Wholesalers

POSTED

about 11 hours ago

DEADLINE

Precision Gasket Fabrication (NSN 5330-01-615-9437)This subcontract involves the precision fabrication of six gaskets under NSN 5330-01-615-9437 for the DLA Weapons Support Land Supply Chain. The scope of work includes cutting and molding according to specific technical drawings and the completion of First Article Testing. Strict adherence to quality and safety standards is required, specifically the total prohibition of asbestos and compliance with MIL-STD-130N marking requirements. To qualify for this project, contractors must hold CMMC Level 2 and JCP certifications to handle export-controlled data. The final deliverables consist of the six finished gaskets and the corresponding FAT results. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for October 19, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 11 hours ago

DEADLINE

Specialized Defense Packaging and LogisticsThis subcontract for Specialized Defense Packaging and Logistics involves providing military-grade packaging, marking, and palletization services for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work requires the processing of 20 hardware units in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards, with palletization following DLA requirement RP001. The completed units are to be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland. This opportunity falls under NAICS code 488510 and was posted on October 7, 2026, with a response deadline of October 19, 2026.

Freight Transportation Arrangement

POSTED

about 11 hours ago

DEADLINE

Precision Manufacturing of Resilient Utility MountsThis subcontract involves the precision manufacturing and supply of 20 Resilient Utility Mounts for the DLA Weapons Support Land Supply Chain. The contractor is responsible for fabricating the units according to Lord Corporation part number J-17854-1 and specific source control drawings, ensuring the final products match NSN 5340011807712. Performance will take place in New Cumberland, Pennsylvania. Strict regulatory and environmental standards apply to this engagement, including full adherence to the Buy American Act and a prohibition on the use of mercury or Class I ozone-depleting chemicals. Additionally, the contractor must maintain cybersecurity compliance through a CMMC Level 2 Self-Assessment and adherence to NIST SP 800-171 standards.

All Other Miscellaneous Manufacturing

POSTED

about 11 hours ago

DEADLINE

Pintle Tee Hinge Manufacturing and SupplyThis subcontract involves the manufacturing and supply of 294 pairs of Pintle Tee Hinges for prime contractors supporting the DLA Weapons Support Land Supply Chain. The hinges must be fabricated from zinc-plated wrought steel in accordance with ANSI/BHMA A156.20 standards. Quality control requires the implementation of zero-based sampling per MIL-STD-1916 or ASQ H1331, with packaging and marking adhering to ASTM D3951 and MIL-STD-129. The contractor must ensure full compliance with the Buy American Act and the Berry Amendment. Completed goods are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The solicitation was posted on October 7, 2026, with a response deadline of October 19, 2026, under NAICS code 332510.

Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

Manufacturer of Nonmetallic Seals (Flexfab P/N B0E2038-0006)This subcontract involves the manufacture or sourcing of 19 nonmetallic seals, specifically Flexfab part number B0E2038-0006, to support prime contractors for the DLA Weapons Support Land Supply Chain. The project requires strict adherence to quality and identification standards, including zero-based sampling per MIL-STD-1916 or ASQ H1331 and IUID compliance according to MIL-STD-130N. All deliverables must be packaged in accordance with MIL-STD-129 and MIL-STD-2073-1E. To be eligible, the provider must maintain ISO 9001:2015 certification and hold FAA Airworthiness Approval. The performance of this contract is centered at Tinker AFB. Interested parties should note the response deadline of October 19, 2026, for this Department of Defense requirement under NAICS code 339991.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Preformed Packing (NSN 5330-01-578-3368)This subcontract involves the manufacture or procurement of one set of preformed packing, identified as NSN 5330-01-578-3368, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The items must be sealed in medium-duty, waterproof, greaseproof, and opaque bags in strict accordance with MIL-DTL-117, Type II, Class C, Style 1. All deliverables must adhere to MIL-STD-129 and MIL-STD-2073-1E standards for packaging and marking, and the contractor must ensure full compliance with the Berry Amendment. The project is managed under NAICS code 332999 for the Department of Defense, with the place of performance located in West Bath, Maine. Interested parties must submit their responses by October 19, 2026, to fulfill the requirement for the delivery of the specified packing set according to all applicable military specifications.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

MIL-SPEC Packaging ServicesThis subcontract for MIL-SPEC Packaging Services supports prime contractors delivering to the DLA Weapons Support Land Supply Chain. The scope of work involves the specialized packaging of UV-sensitive gaskets using medium duty, waterproof, greaseproof, and opaque bags in strict accordance with MIL-DTL-117, Type II, Class C, Style 1. Additionally, the provider must ensure all items are marked and identified per MIL-STD-129 and MIL-STD-130N, which includes the application of Do Not Bend warnings to ensure the gaskets are delivered ready for shipment. The project is categorized under NAICS code 488410 and will be performed in New Cumberland, Pennsylvania. Interested parties should note that the response deadline is October 19, 2026. This effort is managed under the Department of Defense for the DLA Weapons Support Land Supply Chain to maintain rigorous military standards for component preservation and identification.

Motor Vehicle Towing

POSTED

about 11 hours ago

DEADLINE

Gasket Supplier (NSN 5330-01-615-2235)This subcontract involves the manufacture or procurement of 65 gaskets for prime contractors supporting the DLA Weapons Support Land Supply Chain. All units must be produced in accordance with NSN 5330-01-615-2235 and the DLA Master List of Technical and Quality Requirements. Strict material standards are enforced, requiring that all gaskets are asbestos-free, mercury-free, and contain no Class I ozone-depleting chemicals. The contract requires full compliance with the Buy American Act and falls under NAICS code 339999. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 19, 2026, to fulfill the delivery of the 65 completed gaskets.

All Other Miscellaneous Manufacturing

POSTED

about 11 hours ago

DEADLINE

Manufacture and Supply of Helical Compression Springs (NSN 5360-01-179-4595)This subcontract involves the manufacture and supply of helical compression springs under NSN 5360-01-179-4595 for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider must fabricate the springs in strict accordance with the DLA Master List of Technical and Quality Requirements (RA001), ensuring that all components are free of mercury and fully compliant with the Buy American Act. The scope of work requires the delivery of one completed spring specifically packaged and marked for international shipment, adhering to MIL-STD-2073-1E and MIL-STD-129 standards. This procurement falls under NAICS code 332112 and is managed by the Department of Defense.

Nonferrous Forging

POSTED

about 11 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS